Merge branch 'add-support-for-25g-50g-and-100g-to-fbnic'

Alexander Duyck says:

====================
Add support for 25G, 50G, and 100G to fbnic

The fbnic driver up till now had avoided actually reporting link as the
phylink setup only supported up to 40G configurations. This changeset is
meant to start addressing that by adding support for 50G and 100G interface
types.

With that basic support added fbnic can then set those types based on the
EEPROM configuration provided by the firmware and then report those speeds
out using the information provided via the phylink call for getting the
link ksettings. This provides the basic MAC support and enables supporting
the speeds as well as configuring flow control.

After this I plan to add support for a PHY that will represent the SerDes
PHY being used to manage the link as we need a way to indicate link
training into phylink to prevent link flaps on the PCS while the SerDes is
in training, and then after that I will look at rolling support for our
PCS/PMA into the XPCS driver.
====================

Link: https://patch.msgid.link/175028434031.625704.17964815932031774402.stgit@ahduyck-xeon-server.home.arpa
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

12 files changed, 237 insertions, 93 deletions

diff --git a/drivers/net/ethernet/meta/fbnic/fbnic_ethtool.c b/drivers/net/ethernet/meta/fbnic/fbnic_ethtool.c
index 4646e80c3462..7fe9983d3c0e 100644
--- a/drivers/net/ethernet/meta/fbnic/fbnic_ethtool.c
+++ b/drivers/net/ethernet/meta/fbnic/fbnic_ethtool.c
@@ -1683,10 +1683,13 @@ static const struct ethtool_ops fbnic_ethtool_ops = {
 	.get_drvinfo		= fbnic_get_drvinfo,
 	.get_regs_len		= fbnic_get_regs_len,
 	.get_regs		= fbnic_get_regs,
+	.get_link		= ethtool_op_get_link,
 	.get_coalesce		= fbnic_get_coalesce,
 	.set_coalesce		= fbnic_set_coalesce,
 	.get_ringparam		= fbnic_get_ringparam,
 	.set_ringparam		= fbnic_set_ringparam,
+	.get_pauseparam		= fbnic_phylink_get_pauseparam,
+	.set_pauseparam		= fbnic_phylink_set_pauseparam,
 	.get_strings		= fbnic_get_strings,
 	.get_ethtool_stats	= fbnic_get_ethtool_stats,
 	.get_sset_count		= fbnic_get_sset_count,
@@ -1705,6 +1708,8 @@ static const struct ethtool_ops fbnic_ethtool_ops = {
 	.set_channels		= fbnic_set_channels,
 	.get_ts_info		= fbnic_get_ts_info,
 	.get_ts_stats		= fbnic_get_ts_stats,
+	.get_link_ksettings	= fbnic_phylink_ethtool_ksettings_get,
+	.get_fecparam		= fbnic_phylink_get_fecparam,
 	.get_eth_mac_stats	= fbnic_get_eth_mac_stats,
 	.get_eth_ctrl_stats	= fbnic_get_eth_ctrl_stats,
 	.get_rmon_stats		= fbnic_get_rmon_stats,
diff --git a/drivers/net/ethernet/meta/fbnic/fbnic_fw.c b/drivers/net/ethernet/meta/fbnic/fbnic_fw.c
index 4521d0483d18..01756aba29fb 100644
--- a/drivers/net/ethernet/meta/fbnic/fbnic_fw.c
+++ b/drivers/net/ethernet/meta/fbnic/fbnic_fw.c
@@ -95,6 +95,9 @@ void fbnic_mbx_init(struct fbnic_dev *fbd)
 	/* Initialize lock to protect Tx ring */
 	spin_lock_init(&fbd->fw_tx_lock);
 
+	/* Reset FW Capabilities */
+	memset(&fbd->fw_cap, 0, sizeof(fbd->fw_cap));
+
 	/* Reinitialize mailbox memory */
 	for (i = 0; i < FBNIC_IPC_MBX_INDICES; i++)
 		memset(&fbd->mbx[i], 0, sizeof(struct fbnic_fw_mbx));
@@ -1117,6 +1120,7 @@ void fbnic_mbx_poll(struct fbnic_dev *fbd)
 
 int fbnic_mbx_poll_tx_ready(struct fbnic_dev *fbd)
 {
+	struct fbnic_fw_mbx *tx_mbx = &fbd->mbx[FBNIC_IPC_MBX_TX_IDX];
 	unsigned long timeout = jiffies + 10 * HZ + 1;
 	int err, i;
 
@@ -1149,8 +1153,23 @@ int fbnic_mbx_poll_tx_ready(struct fbnic_dev *fbd)
 	if (err)
 		goto clean_mbx;
 
-	/* Use "1" to indicate we entered the state waiting for a response */
-	fbd->fw_cap.running.mgmt.version = 1;
+	/* Poll until we get a current management firmware version, use "1"
+	 * to indicate we entered the polling state waiting for a response
+	 */
+	for (fbd->fw_cap.running.mgmt.version = 1;
+	     fbd->fw_cap.running.mgmt.version < MIN_FW_VERSION_CODE;) {
+		if (!tx_mbx->ready)
+			err = -ENODEV;
+		if (err)
+			goto clean_mbx;
+
+		msleep(20);
+		fbnic_mbx_poll(fbd);
+
+		/* set err, but wait till mgmt.version check to report it */
+		if (!time_is_after_jiffies(timeout))
+			err = -ETIMEDOUT;
+	}
 
 	return 0;
 clean_mbx:
diff --git a/drivers/net/ethernet/meta/fbnic/fbnic_fw.h b/drivers/net/ethernet/meta/fbnic/fbnic_fw.h
index 08bc4b918de7..08bf87c5ddf6 100644
--- a/drivers/net/ethernet/meta/fbnic/fbnic_fw.h
+++ b/drivers/net/ethernet/meta/fbnic/fbnic_fw.h
@@ -155,10 +155,10 @@ enum {
 };
 
 enum {
-	FBNIC_FW_LINK_SPEED_25R1		= 1,
-	FBNIC_FW_LINK_SPEED_50R2		= 2,
-	FBNIC_FW_LINK_SPEED_50R1		= 3,
-	FBNIC_FW_LINK_SPEED_100R2		= 4,
+	FBNIC_FW_LINK_MODE_25CR			= 1,
+	FBNIC_FW_LINK_MODE_50CR2		= 2,
+	FBNIC_FW_LINK_MODE_50CR			= 3,
+	FBNIC_FW_LINK_MODE_100CR2		= 4,
 };
 
 enum {
diff --git a/drivers/net/ethernet/meta/fbnic/fbnic_mac.c b/drivers/net/ethernet/meta/fbnic/fbnic_mac.c
index ea5ea7e329cb..5ff45463f9d2 100644
--- a/drivers/net/ethernet/meta/fbnic/fbnic_mac.c
+++ b/drivers/net/ethernet/meta/fbnic/fbnic_mac.c
@@ -452,7 +452,7 @@ static u32 __fbnic_mac_cmd_config_asic(struct fbnic_dev *fbd,
 		command_config |= FBNIC_MAC_COMMAND_CONFIG_RX_PAUSE_DIS;
 
 	/* Disable fault handling if no FEC is requested */
-	if ((fbn->fec & FBNIC_FEC_MODE_MASK) == FBNIC_FEC_OFF)
+	if (fbn->fec == FBNIC_FEC_OFF)
 		command_config |= FBNIC_MAC_COMMAND_CONFIG_FLT_HDL_DIS;
 
 	return command_config;
@@ -468,15 +468,15 @@ static bool fbnic_mac_get_pcs_link_status(struct fbnic_dev *fbd)
 		return false;
 
 	/* Define the expected lane mask for the status bits we need to check */
-	switch (fbn->link_mode & FBNIC_LINK_MODE_MASK) {
-	case FBNIC_LINK_100R2:
+	switch (fbn->aui) {
+	case FBNIC_AUI_100GAUI2:
 		lane_mask = 0xf;
 		break;
-	case FBNIC_LINK_50R1:
+	case FBNIC_AUI_50GAUI1:
 		lane_mask = 3;
 		break;
-	case FBNIC_LINK_50R2:
-		switch (fbn->fec & FBNIC_FEC_MODE_MASK) {
+	case FBNIC_AUI_LAUI2:
+		switch (fbn->fec) {
 		case FBNIC_FEC_OFF:
 			lane_mask = 0x63;
 			break;
@@ -488,13 +488,13 @@ static bool fbnic_mac_get_pcs_link_status(struct fbnic_dev *fbd)
 			break;
 		}
 		break;
-	case FBNIC_LINK_25R1:
+	case FBNIC_AUI_25GAUI:
 		lane_mask = 1;
 		break;
 	}
 
 	/* Use an XOR to remove the bits we expect to see set */
-	switch (fbn->fec & FBNIC_FEC_MODE_MASK) {
+	switch (fbn->fec) {
 	case FBNIC_FEC_OFF:
 		lane_mask ^= FIELD_GET(FBNIC_SIG_PCS_OUT0_BLOCK_LOCK,
 				       pcs_status);
@@ -540,53 +540,41 @@ static bool fbnic_pcs_get_link_asic(struct fbnic_dev *fbd)
 	return link;
 }
 
-static void fbnic_pcs_get_fw_settings(struct fbnic_dev *fbd)
+void fbnic_mac_get_fw_settings(struct fbnic_dev *fbd, u8 *aui, u8 *fec)
 {
-	struct fbnic_net *fbn = netdev_priv(fbd->netdev);
-	u8 link_mode = fbn->link_mode;
-	u8 fec = fbn->fec;
-
-	/* Update FEC first to reflect FW current mode */
-	if (fbn->fec & FBNIC_FEC_AUTO) {
-		switch (fbd->fw_cap.link_fec) {
-		case FBNIC_FW_LINK_FEC_NONE:
-			fec = FBNIC_FEC_OFF;
-			break;
-		case FBNIC_FW_LINK_FEC_RS:
-			fec = FBNIC_FEC_RS;
-			break;
-		case FBNIC_FW_LINK_FEC_BASER:
-			fec = FBNIC_FEC_BASER;
-			break;
-		default:
-			return;
-		}
-
-		fbn->fec = fec;
+	/* Retrieve default speed from FW */
+	switch (fbd->fw_cap.link_speed) {
+	case FBNIC_FW_LINK_MODE_25CR:
+		*aui = FBNIC_AUI_25GAUI;
+		break;
+	case FBNIC_FW_LINK_MODE_50CR2:
+		*aui = FBNIC_AUI_LAUI2;
+		break;
+	case FBNIC_FW_LINK_MODE_50CR:
+		*aui = FBNIC_AUI_50GAUI1;
+		*fec = FBNIC_FEC_RS;
+		return;
+	case FBNIC_FW_LINK_MODE_100CR2:
+		*aui = FBNIC_AUI_100GAUI2;
+		*fec = FBNIC_FEC_RS;
+		return;
+	default:
+		*aui = FBNIC_AUI_UNKNOWN;
+		return;
 	}
 
-	/* Do nothing if AUTO mode is not engaged */
-	if (fbn->link_mode & FBNIC_LINK_AUTO) {
-		switch (fbd->fw_cap.link_speed) {
-		case FBNIC_FW_LINK_SPEED_25R1:
-			link_mode = FBNIC_LINK_25R1;
-			break;
-		case FBNIC_FW_LINK_SPEED_50R2:
-			link_mode = FBNIC_LINK_50R2;
-			break;
-		case FBNIC_FW_LINK_SPEED_50R1:
-			link_mode = FBNIC_LINK_50R1;
-			fec = FBNIC_FEC_RS;
-			break;
-		case FBNIC_FW_LINK_SPEED_100R2:
-			link_mode = FBNIC_LINK_100R2;
-			fec = FBNIC_FEC_RS;
-			break;
-		default:
-			return;
-		}
-
-		fbn->link_mode = link_mode;
+	/* Update FEC first to reflect FW current mode */
+	switch (fbd->fw_cap.link_fec) {
+	case FBNIC_FW_LINK_FEC_NONE:
+		*fec = FBNIC_FEC_OFF;
+		break;
+	case FBNIC_FW_LINK_FEC_RS:
+	default:
+		*fec = FBNIC_FEC_RS;
+		break;
+	case FBNIC_FW_LINK_FEC_BASER:
+		*fec = FBNIC_FEC_BASER;
+		break;
 	}
 }
 
@@ -596,9 +584,6 @@ static int fbnic_pcs_enable_asic(struct fbnic_dev *fbd)
 	wr32(fbd, FBNIC_SIG_PCS_INTR_MASK, ~0);
 	wr32(fbd, FBNIC_SIG_PCS_INTR_STS, ~0);
 
-	/* Pull in settings from FW */
-	fbnic_pcs_get_fw_settings(fbd);
-
 	return 0;
 }
 
diff --git a/drivers/net/ethernet/meta/fbnic/fbnic_mac.h b/drivers/net/ethernet/meta/fbnic/fbnic_mac.h
index 4d508e1e2151..86fa06da2b3e 100644
--- a/drivers/net/ethernet/meta/fbnic/fbnic_mac.h
+++ b/drivers/net/ethernet/meta/fbnic/fbnic_mac.h
@@ -25,27 +25,23 @@ enum {
 	FBNIC_FEC_OFF		= 0,
 	FBNIC_FEC_RS		= 1,
 	FBNIC_FEC_BASER		= 2,
-	FBNIC_FEC_AUTO		= 4,
 };
 
-#define FBNIC_FEC_MODE_MASK	(FBNIC_FEC_AUTO - 1)
-
-/* Treat the link modes as a set of modulation/lanes bitmask:
+/* Treat the AUI modes as a modulation/lanes bitmask:
  * Bit 0: Lane Count, 0 = R1, 1 = R2
  * Bit 1: Modulation, 0 = NRZ, 1 = PAM4
- * Bit 2: Retrieve link mode from FW
+ * Bit 2: Unknown Modulation/Lane Configuration
  */
 enum {
-	FBNIC_LINK_25R1		= 0,
-	FBNIC_LINK_50R2		= 1,
-	FBNIC_LINK_50R1		= 2,
-	FBNIC_LINK_100R2	= 3,
-	FBNIC_LINK_AUTO		= 4,
+	FBNIC_AUI_25GAUI	= 0,	/* 25.7812GBd	25.78125 * 1 */
+	FBNIC_AUI_LAUI2		= 1,	/* 51.5625GBd	25.78128 * 2 */
+	FBNIC_AUI_50GAUI1	= 2,	/* 53.125GBd	53.125   * 1 */
+	FBNIC_AUI_100GAUI2	= 3,	/* 106.25GBd	53.125   * 2 */
+	FBNIC_AUI_UNKNOWN	= 4,
 };
 
-#define FBNIC_LINK_MODE_R2	(FBNIC_LINK_50R2)
-#define FBNIC_LINK_MODE_PAM4	(FBNIC_LINK_50R1)
-#define FBNIC_LINK_MODE_MASK	(FBNIC_LINK_AUTO - 1)
+#define FBNIC_AUI_MODE_R2	(FBNIC_AUI_LAUI2)
+#define FBNIC_AUI_MODE_PAM4	(FBNIC_AUI_50GAUI1)
 
 enum fbnic_sensor_id {
 	FBNIC_SENSOR_TEMP,		/* Temp in millidegrees Centigrade */
@@ -97,4 +93,5 @@ struct fbnic_mac {
 };
 
 int fbnic_mac_init(struct fbnic_dev *fbd);
+void fbnic_mac_get_fw_settings(struct fbnic_dev *fbd, u8 *aui, u8 *fec);
 #endif /* _FBNIC_MAC_H_ */
diff --git a/drivers/net/ethernet/meta/fbnic/fbnic_netdev.c b/drivers/net/ethernet/meta/fbnic/fbnic_netdev.c
index aa812c63d5af..7bd7812d9c06 100644
--- a/drivers/net/ethernet/meta/fbnic/fbnic_netdev.c
+++ b/drivers/net/ethernet/meta/fbnic/fbnic_netdev.c
@@ -736,8 +736,6 @@ struct net_device *fbnic_netdev_alloc(struct fbnic_dev *fbd)
 	 */
 	netdev->ethtool->wol_enabled = true;
 
-	fbn->fec = FBNIC_FEC_AUTO | FBNIC_FEC_RS;
-	fbn->link_mode = FBNIC_LINK_AUTO | FBNIC_LINK_50R2;
 	netif_carrier_off(netdev);
 
 	netif_tx_stop_all_queues(netdev);
diff --git a/drivers/net/ethernet/meta/fbnic/fbnic_netdev.h b/drivers/net/ethernet/meta/fbnic/fbnic_netdev.h
index 561837e80ec8..a3dc85d3838b 100644
--- a/drivers/net/ethernet/meta/fbnic/fbnic_netdev.h
+++ b/drivers/net/ethernet/meta/fbnic/fbnic_netdev.h
@@ -42,9 +42,8 @@ struct fbnic_net {
 	struct phylink_config phylink_config;
 	struct phylink_pcs phylink_pcs;
 
-	/* TBD: Remove these when phylink supports FEC and lane config */
+	u8 aui;
 	u8 fec;
-	u8 link_mode;
 
 	/* Cached top bits of the HW time counter for 40b -> 64b conversion */
 	u32 time_high;
@@ -93,5 +92,13 @@ void fbnic_time_stop(struct fbnic_net *fbn);
 void __fbnic_set_rx_mode(struct net_device *netdev);
 void fbnic_clear_rx_mode(struct net_device *netdev);
 
+void fbnic_phylink_get_pauseparam(struct net_device *netdev,
+				  struct ethtool_pauseparam *pause);
+int fbnic_phylink_set_pauseparam(struct net_device *netdev,
+				 struct ethtool_pauseparam *pause);
+int fbnic_phylink_ethtool_ksettings_get(struct net_device *netdev,
+					struct ethtool_link_ksettings *cmd);
+int fbnic_phylink_get_fecparam(struct net_device *netdev,
+			       struct ethtool_fecparam *fecparam);
 int fbnic_phylink_init(struct net_device *netdev);
 #endif /* _FBNIC_NETDEV_H_ */
diff --git a/drivers/net/ethernet/meta/fbnic/fbnic_phylink.c b/drivers/net/ethernet/meta/fbnic/fbnic_phylink.c
index 860b02b22c15..7ce3fdd25282 100644
--- a/drivers/net/ethernet/meta/fbnic/fbnic_phylink.c
+++ b/drivers/net/ethernet/meta/fbnic/fbnic_phylink.c
@@ -8,6 +8,99 @@
 #include "fbnic_mac.h"
 #include "fbnic_netdev.h"
 
+static phy_interface_t fbnic_phylink_select_interface(u8 aui)
+{
+	switch (aui) {
+	case FBNIC_AUI_100GAUI2:
+		return PHY_INTERFACE_MODE_100GBASEP;
+	case FBNIC_AUI_50GAUI1:
+		return PHY_INTERFACE_MODE_50GBASER;
+	case FBNIC_AUI_LAUI2:
+		return PHY_INTERFACE_MODE_LAUI;
+	case FBNIC_AUI_25GAUI:
+		return PHY_INTERFACE_MODE_25GBASER;
+	}
+
+	return PHY_INTERFACE_MODE_NA;
+}
+
+void fbnic_phylink_get_pauseparam(struct net_device *netdev,
+				  struct ethtool_pauseparam *pause)
+{
+	struct fbnic_net *fbn = netdev_priv(netdev);
+
+	phylink_ethtool_get_pauseparam(fbn->phylink, pause);
+}
+
+int fbnic_phylink_set_pauseparam(struct net_device *netdev,
+				 struct ethtool_pauseparam *pause)
+{
+	struct fbnic_net *fbn = netdev_priv(netdev);
+
+	return phylink_ethtool_set_pauseparam(fbn->phylink, pause);
+}
+
+static void
+fbnic_phylink_get_supported_fec_modes(unsigned long *supported)
+{
+	/* The NIC can support up to 8 possible combinations.
+	 * Either 50G-CR, or 100G-CR2
+	 *   This is with RS FEC mode only
+	 * Either 25G-CR, or 50G-CR2
+	 *   This is with No FEC, RS, or Base-R
+	 */
+	if (phylink_test(supported, 100000baseCR2_Full) ||
+	    phylink_test(supported, 50000baseCR_Full))
+		phylink_set(supported, FEC_RS);
+	if (phylink_test(supported, 50000baseCR2_Full) ||
+	    phylink_test(supported, 25000baseCR_Full)) {
+		phylink_set(supported, FEC_BASER);
+		phylink_set(supported, FEC_NONE);
+		phylink_set(supported, FEC_RS);
+	}
+}
+
+int fbnic_phylink_ethtool_ksettings_get(struct net_device *netdev,
+					struct ethtool_link_ksettings *cmd)
+{
+	struct fbnic_net *fbn = netdev_priv(netdev);
+	int err;
+
+	err = phylink_ethtool_ksettings_get(fbn->phylink, cmd);
+	if (!err) {
+		unsigned long *supp = cmd->link_modes.supported;
+
+		cmd->base.port = PORT_DA;
+		cmd->lanes = (fbn->aui & FBNIC_AUI_MODE_R2) ? 2 : 1;
+
+		fbnic_phylink_get_supported_fec_modes(supp);
+	}
+
+	return err;
+}
+
+int fbnic_phylink_get_fecparam(struct net_device *netdev,
+			       struct ethtool_fecparam *fecparam)
+{
+	struct fbnic_net *fbn = netdev_priv(netdev);
+
+	if (fbn->fec & FBNIC_FEC_RS) {
+		fecparam->active_fec = ETHTOOL_FEC_RS;
+		fecparam->fec = ETHTOOL_FEC_RS;
+	} else if (fbn->fec & FBNIC_FEC_BASER) {
+		fecparam->active_fec = ETHTOOL_FEC_BASER;
+		fecparam->fec = ETHTOOL_FEC_BASER;
+	} else {
+		fecparam->active_fec = ETHTOOL_FEC_OFF;
+		fecparam->fec = ETHTOOL_FEC_OFF;
+	}
+
+	if (fbn->aui & FBNIC_AUI_MODE_PAM4)
+		fecparam->fec |= ETHTOOL_FEC_AUTO;
+
+	return 0;
+}
+
 static struct fbnic_net *
 fbnic_pcs_to_net(struct phylink_pcs *pcs)
 {
@@ -21,23 +114,20 @@ fbnic_phylink_pcs_get_state(struct phylink_pcs *pcs, unsigned int neg_mode,
 	struct fbnic_net *fbn = fbnic_pcs_to_net(pcs);
 	struct fbnic_dev *fbd = fbn->fbd;
 
-	/* For now we use hard-coded defaults and FW config to determine
-	 * the current values. In future patches we will add support for
-	 * reconfiguring these values and changing link settings.
-	 */
-	switch (fbd->fw_cap.link_speed) {
-	case FBNIC_FW_LINK_SPEED_25R1:
+	switch (fbn->aui) {
+	case FBNIC_AUI_25GAUI:
 		state->speed = SPEED_25000;
 		break;
-	case FBNIC_FW_LINK_SPEED_50R2:
+	case FBNIC_AUI_LAUI2:
+	case FBNIC_AUI_50GAUI1:
 		state->speed = SPEED_50000;
 		break;
-	case FBNIC_FW_LINK_SPEED_100R2:
+	case FBNIC_AUI_100GAUI2:
 		state->speed = SPEED_100000;
 		break;
 	default:
-		state->speed = SPEED_UNKNOWN;
-		break;
+		state->link = 0;
+		return;
 	}
 
 	state->duplex = DUPLEX_FULL;
@@ -131,6 +221,7 @@ static const struct phylink_mac_ops fbnic_phylink_mac_ops = {
 int fbnic_phylink_init(struct net_device *netdev)
 {
 	struct fbnic_net *fbn = netdev_priv(netdev);
+	struct fbnic_dev *fbd = fbn->fbd;
 	struct phylink *phylink;
 
 	fbn->phylink_pcs.ops = &fbnic_phylink_pcs_ops;
@@ -138,18 +229,23 @@ int fbnic_phylink_init(struct net_device *netdev)
 	fbn->phylink_config.dev = &netdev->dev;
 	fbn->phylink_config.type = PHYLINK_NETDEV;
 	fbn->phylink_config.mac_capabilities = MAC_SYM_PAUSE | MAC_ASYM_PAUSE |
-					       MAC_10000FD | MAC_25000FD |
-					       MAC_40000FD | MAC_50000FD |
+					       MAC_25000FD | MAC_50000FD |
 					       MAC_100000FD;
 	fbn->phylink_config.default_an_inband = true;
 
-	__set_bit(PHY_INTERFACE_MODE_XGMII,
+	__set_bit(PHY_INTERFACE_MODE_100GBASEP,
+		  fbn->phylink_config.supported_interfaces);
+	__set_bit(PHY_INTERFACE_MODE_50GBASER,
 		  fbn->phylink_config.supported_interfaces);
-	__set_bit(PHY_INTERFACE_MODE_XLGMII,
+	__set_bit(PHY_INTERFACE_MODE_LAUI,
 		  fbn->phylink_config.supported_interfaces);
+	__set_bit(PHY_INTERFACE_MODE_25GBASER,
+		  fbn->phylink_config.supported_interfaces);
+
+	fbnic_mac_get_fw_settings(fbd, &fbn->aui, &fbn->fec);
 
 	phylink = phylink_create(&fbn->phylink_config, NULL,
-				 PHY_INTERFACE_MODE_XLGMII,
+				 fbnic_phylink_select_interface(fbn->aui),
 				 &fbnic_phylink_mac_ops);
 	if (IS_ERR(phylink))
 		return PTR_ERR(phylink);
diff --git a/drivers/net/phy/phy-core.c b/drivers/net/phy/phy-core.c
index 27f1833563ab..c480bb40fa73 100644
--- a/drivers/net/phy/phy-core.c
+++ b/drivers/net/phy/phy-core.c
@@ -142,6 +142,9 @@ int phy_interface_num_ports(phy_interface_t interface)
 	case PHY_INTERFACE_MODE_RXAUI:
 	case PHY_INTERFACE_MODE_XAUI:
 	case PHY_INTERFACE_MODE_1000BASEKX:
+	case PHY_INTERFACE_MODE_50GBASER:
+	case PHY_INTERFACE_MODE_LAUI:
+	case PHY_INTERFACE_MODE_100GBASEP:
 		return 1;
 	case PHY_INTERFACE_MODE_QSGMII:
 	case PHY_INTERFACE_MODE_QUSGMII:
diff --git a/drivers/net/phy/phy_caps.c b/drivers/net/phy/phy_caps.c
index 38417e288611..d11ce1c7e712 100644
--- a/drivers/net/phy/phy_caps.c
+++ b/drivers/net/phy/phy_caps.c
@@ -351,6 +351,15 @@ unsigned long phy_caps_from_interface(phy_interface_t interface)
 		link_caps |= BIT(LINK_CAPA_40000FD);
 		break;
 
+	case PHY_INTERFACE_MODE_50GBASER:
+	case PHY_INTERFACE_MODE_LAUI:
+		link_caps |= BIT(LINK_CAPA_50000FD);
+		break;
+
+	case PHY_INTERFACE_MODE_100GBASEP:
+		link_caps |= BIT(LINK_CAPA_100000FD);
+		break;
+
 	case PHY_INTERFACE_MODE_INTERNAL:
 		link_caps |= LINK_CAPA_ALL;
 		break;
diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c
index 0faa3d97e06b..67218d278ce6 100644
--- a/drivers/net/phy/phylink.c
+++ b/drivers/net/phy/phylink.c
@@ -127,6 +127,9 @@ do {									\
 #endif
 
 static const phy_interface_t phylink_sfp_interface_preference[] = {
+	PHY_INTERFACE_MODE_100GBASEP,
+	PHY_INTERFACE_MODE_50GBASER,
+	PHY_INTERFACE_MODE_LAUI,
 	PHY_INTERFACE_MODE_25GBASER,
 	PHY_INTERFACE_MODE_USXGMII,
 	PHY_INTERFACE_MODE_10GBASER,
@@ -274,6 +277,13 @@ static int phylink_interface_max_speed(phy_interface_t interface)
 	case PHY_INTERFACE_MODE_XLGMII:
 		return SPEED_40000;
 
+	case PHY_INTERFACE_MODE_50GBASER:
+	case PHY_INTERFACE_MODE_LAUI:
+		return SPEED_50000;
+
+	case PHY_INTERFACE_MODE_100GBASEP:
+		return SPEED_100000;
+
 	case PHY_INTERFACE_MODE_INTERNAL:
 	case PHY_INTERFACE_MODE_NA:
 	case PHY_INTERFACE_MODE_MAX:
@@ -798,6 +808,9 @@ static int phylink_parse_mode(struct phylink *pl,
 		case PHY_INTERFACE_MODE_10GKR:
 		case PHY_INTERFACE_MODE_10GBASER:
 		case PHY_INTERFACE_MODE_XLGMII:
+		case PHY_INTERFACE_MODE_50GBASER:
+		case PHY_INTERFACE_MODE_LAUI:
+		case PHY_INTERFACE_MODE_100GBASEP:
 			caps = ~(MAC_SYM_PAUSE | MAC_ASYM_PAUSE);
 			caps = phylink_get_capabilities(pl->link_config.interface, caps,
 							RATE_MATCH_NONE);
diff --git a/include/linux/phy.h b/include/linux/phy.h
index b037aab7b71d..74c1bcf64b3c 100644
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -103,6 +103,9 @@ extern const int phy_basic_ports_array[3];
  * @PHY_INTERFACE_MODE_QUSGMII: Quad Universal SGMII
  * @PHY_INTERFACE_MODE_1000BASEKX: 1000Base-KX - with Clause 73 AN
  * @PHY_INTERFACE_MODE_10G_QXGMII: 10G-QXGMII - 4 ports over 10G USXGMII
+ * @PHY_INTERFACE_MODE_50GBASER: 50GBase-R - with Clause 134 FEC
+ * @PHY_INTERFACE_MODE_LAUI: 50 Gigabit Attachment Unit Interface
+ * @PHY_INTERFACE_MODE_100GBASEP: 100GBase-P - with Clause 134 FEC
  * @PHY_INTERFACE_MODE_MAX: Book keeping
  *
  * Describes the interface between the MAC and PHY.
@@ -144,6 +147,9 @@ typedef enum {
 	PHY_INTERFACE_MODE_QUSGMII,
 	PHY_INTERFACE_MODE_1000BASEKX,
 	PHY_INTERFACE_MODE_10G_QXGMII,
+	PHY_INTERFACE_MODE_50GBASER,
+	PHY_INTERFACE_MODE_LAUI,
+	PHY_INTERFACE_MODE_100GBASEP,
 	PHY_INTERFACE_MODE_MAX,
 } phy_interface_t;
 
@@ -260,6 +266,12 @@ static inline const char *phy_modes(phy_interface_t interface)
 		return "qusgmii";
 	case PHY_INTERFACE_MODE_10G_QXGMII:
 		return "10g-qxgmii";
+	case PHY_INTERFACE_MODE_50GBASER:
+		return "50gbase-r";
+	case PHY_INTERFACE_MODE_LAUI:
+		return "laui";
+	case PHY_INTERFACE_MODE_100GBASEP:
+		return "100gbase-p";
 	default:
 		return "unknown";
 	}