diff options
| author | Xiangxu Yin <xiangxu.yin@oss.qualcomm.com> | 2025-12-15 20:42:03 +0800 |
|---|---|---|
| committer | Vinod Koul <vkoul@kernel.org> | 2025-12-23 23:11:04 +0530 |
| commit | cb2255822509c9dcdd1fad0cd167032dee7dc6c1 (patch) | |
| tree | c3045dba2f457cf7e45322b446660a37a527ac07 | |
| parent | 049e708e7705534a9992b24c5090d133c8efbca6 (diff) | |
phy: qcom: qmp-usbc: Move USB-only init to usb_power_on
The current implementation programs USB-specific registers in
qmp_usbc_com_init(), which is shared by both USB and DP modes. This
causes unnecessary configuration when the PHY is used for DP.
Move USB-only register setup from com_init to qmp_usbc_usb_power_on,
so it runs only for USB mode.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Xiangxu Yin <xiangxu.yin@oss.qualcomm.com>
Link: https://patch.msgid.link/20251215-add-displayport-support-for-qcs615-platform-v8-7-cbc72c88a44e@oss.qualcomm.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
| -rw-r--r-- | drivers/phy/qualcomm/phy-qcom-qmp-usbc.c | 22 |
1 files changed, 10 insertions, 12 deletions
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-usbc.c b/drivers/phy/qualcomm/phy-qcom-qmp-usbc.c index a6431e6d5586..c8e0f9574ba6 100644 --- a/drivers/phy/qualcomm/phy-qcom-qmp-usbc.c +++ b/drivers/phy/qualcomm/phy-qcom-qmp-usbc.c @@ -30,6 +30,8 @@ #include "phy-qcom-qmp-pcs-misc-v3.h" #define PHY_INIT_COMPLETE_TIMEOUT 10000 +#define SW_PORTSELECT_VAL BIT(0) +#define SW_PORTSELECT_MUX BIT(1) /* set of registers with offsets different per-PHY */ enum qphy_reg_layout { @@ -531,8 +533,6 @@ static int qmp_usbc_com_init(struct phy *phy) { struct qmp_usbc *qmp = phy_get_drvdata(phy); const struct qmp_phy_cfg *cfg = qmp->cfg; - void __iomem *pcs = qmp->pcs; - u32 val = 0; int ret; ret = regulator_bulk_enable(cfg->num_vregs, qmp->vregs); @@ -557,16 +557,6 @@ static int qmp_usbc_com_init(struct phy *phy) if (ret) goto err_assert_reset; - qphy_setbits(pcs, cfg->regs[QPHY_PCS_POWER_DOWN_CONTROL], SW_PWRDN); - -#define SW_PORTSELECT_VAL BIT(0) -#define SW_PORTSELECT_MUX BIT(1) - /* Use software based port select and switch on typec orientation */ - val = SW_PORTSELECT_MUX; - if (qmp->orientation == TYPEC_ORIENTATION_REVERSE) - val |= SW_PORTSELECT_VAL; - writel(val, qmp->pcs_misc); - return 0; err_assert_reset: @@ -599,6 +589,14 @@ static int qmp_usbc_usb_power_on(struct phy *phy) unsigned int val; int ret; + qphy_setbits(qmp->pcs, cfg->regs[QPHY_PCS_POWER_DOWN_CONTROL], SW_PWRDN); + + /* Use software based port select and switch on typec orientation */ + val = SW_PORTSELECT_MUX; + if (qmp->orientation == TYPEC_ORIENTATION_REVERSE) + val |= SW_PORTSELECT_VAL; + writel(val, qmp->pcs_misc); + qmp_configure(qmp->dev, qmp->serdes, cfg->serdes_tbl, cfg->serdes_tbl_num); |