dt-bindings: firmware: google,gs101-acpm-ipc: add S2MPG11 secondary PMIC

In a typical system using the Samsung S2MPG10 PMIC, an S2MPG11 is used
as a sub-PMIC.

The interface for both is the ACPM firmware protocol, so update the
binding to allow the relevant node and update the example here to
describe the connection for both PMICs.

Since we have two PMICs here, but can not use the 'reg' property (as
the addressing is based on software, i.e. the ACPM firmware), the node
names reflect that with their respective suffix. The existing 'pmic'
therefore becomes deprecated in favour of 'pmic-1'.

While at it, update the example.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://patch.msgid.link/20260210-s2mpg1x-regulators-v8-1-c429d709c0e0@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>

1 files changed, 48 insertions, 2 deletions

diff --git a/Documentation/devicetree/bindings/firmware/google,gs101-acpm-ipc.yaml b/Documentation/devicetree/bindings/firmware/google,gs101-acpm-ipc.yaml
index 4a1e3e3c0505..e68f9c3ca5e2 100644
--- a/Documentation/devicetree/bindings/firmware/google,gs101-acpm-ipc.yaml
+++ b/Documentation/devicetree/bindings/firmware/google,gs101-acpm-ipc.yaml
@@ -37,6 +37,7 @@ properties:
     maxItems: 1
 
   pmic:
+    deprecated: true
     description: Child node describing the main PMIC.
     type: object
     additionalProperties: true
@@ -45,6 +46,24 @@ properties:
       compatible:
         const: samsung,s2mpg10-pmic
 
+  pmic-1:
+    description: Child node describing the main PMIC.
+    type: object
+    additionalProperties: true
+
+    properties:
+      compatible:
+        const: samsung,s2mpg10-pmic
+
+  pmic-2:
+    description: Child node describing the sub PMIC.
+    type: object
+    additionalProperties: true
+
+    properties:
+      compatible:
+        const: samsung,s2mpg11-pmic
+
   shmem:
     description:
       List of phandle pointing to the shared memory (SHM) area. The memory
@@ -62,7 +81,9 @@ additionalProperties: false
 
 examples:
   - |
+    #include <dt-bindings/gpio/gpio.h>
     #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/regulator/samsung,s2mpg10-regulator.h>
 
     power-management {
         compatible = "google,gs101-acpm-ipc";
@@ -70,10 +91,12 @@ examples:
         mboxes = <&ap2apm_mailbox>;
         shmem = <&apm_sram>;
 
-        pmic {
+        pmic-1 {
             compatible = "samsung,s2mpg10-pmic";
             interrupts-extended = <&gpa0 6 IRQ_TYPE_LEVEL_LOW>;
 
+            vinl3m-supply = <&buck8m>;
+
             regulators {
                 ldo1m {
                     regulator-name = "vdd_ldo1";
@@ -82,7 +105,13 @@ examples:
                     regulator-always-on;
                 };
 
-                // ...
+                ldo20m {
+                    regulator-name = "vdd_dmics";
+                    regulator-min-microvolt = <700000>;
+                    regulator-max-microvolt = <1300000>;
+                    regulator-always-on;
+                    samsung,ext-control = <S2MPG10_EXTCTRL_LDO20M_EN2>;
+                };
 
                 buck8m {
                     regulator-name = "vdd_mif";
@@ -93,4 +122,21 @@ examples:
                 };
             };
         };
+
+        pmic-2 {
+            compatible = "samsung,s2mpg11-pmic";
+            interrupts-extended = <&gpa0 7 IRQ_TYPE_LEVEL_LOW>;
+
+            vinl1s-supply = <&buck8m>;
+            vinl2s-supply = <&buck6s>;
+
+            regulators {
+                buckd {
+                    regulator-name = "vcc_ufs";
+                    regulator-ramp-delay = <6250>;
+                    enable-gpios = <&gpp0 1 GPIO_ACTIVE_HIGH>;
+                    samsung,ext-control = <S2MPG11_EXTCTRL_UFS_EN>;
+                };
+            };
+        };
     };