Merge branch 'phy-mscc-fix-ptp-for-vsc8574-and-vsc8572'

Horatiu Vultur says:

====================
phy: mscc: Fix PTP for VSC8574 and VSC8572

The first patch will update the PHYs VSC8584, VSC8582, VSC8575 and VSC856X
to use PHY_ID_MATCH_EXACT because only rev B exists for these PHYs.
But for the PHYs VSC8574 and VSC8572 exists rev A, B, C, D and E.
This is just a preparation for the second patch to allow the VSC8574 and
VSC8572 to use the function vsc8584_probe().

We want to use vsc8584_probe() for VSC8574 and VSC8572 because this
function does the correct PTP initialization. This change is in the second
patch.
====================

Link: https://patch.msgid.link/20251023191350.190940-1-horatiu.vultur@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

2 files changed, 11 insertions, 26 deletions

diff --git a/drivers/net/phy/mscc/mscc.h b/drivers/net/phy/mscc/mscc.h
index 2d8eca54c40a..2eef5956b9cc 100644
--- a/drivers/net/phy/mscc/mscc.h
+++ b/drivers/net/phy/mscc/mscc.h
@@ -289,12 +289,12 @@ enum rgmii_clock_delay {
 #define PHY_ID_VSC8540			  0x00070760
 #define PHY_ID_VSC8541			  0x00070770
 #define PHY_ID_VSC8552			  0x000704e0
-#define PHY_ID_VSC856X			  0x000707e0
+#define PHY_ID_VSC856X			  0x000707e1
 #define PHY_ID_VSC8572			  0x000704d0
 #define PHY_ID_VSC8574			  0x000704a0
-#define PHY_ID_VSC8575			  0x000707d0
-#define PHY_ID_VSC8582			  0x000707b0
-#define PHY_ID_VSC8584			  0x000707c0
+#define PHY_ID_VSC8575			  0x000707d1
+#define PHY_ID_VSC8582			  0x000707b1
+#define PHY_ID_VSC8584			  0x000707c1
 #define PHY_VENDOR_MSCC			0x00070400
 
 #define MSCC_VDDMAC_1500		  1500
diff --git a/drivers/net/phy/mscc/mscc_main.c b/drivers/net/phy/mscc/mscc_main.c
index ef0ef1570d39..8678ebf89cca 100644
--- a/drivers/net/phy/mscc/mscc_main.c
+++ b/drivers/net/phy/mscc/mscc_main.c
@@ -1724,12 +1724,6 @@ static int vsc8584_config_init(struct phy_device *phydev)
 	 * in this pre-init function.
 	 */
 	if (phy_package_init_once(phydev)) {
-		/* The following switch statement assumes that the lowest
-		 * nibble of the phy_id_mask is always 0. This works because
-		 * the lowest nibble of the PHY_ID's below are also 0.
-		 */
-		WARN_ON(phydev->drv->phy_id_mask & 0xf);
-
 		switch (phydev->phy_id & phydev->drv->phy_id_mask) {
 		case PHY_ID_VSC8504:
 		case PHY_ID_VSC8552:
@@ -2290,11 +2284,6 @@ static int vsc8584_probe(struct phy_device *phydev)
 	   VSC8531_DUPLEX_COLLISION};
 	int ret;
 
-	if ((phydev->phy_id & MSCC_DEV_REV_MASK) != VSC8584_REVB) {
-		dev_err(&phydev->mdio.dev, "Only VSC8584 revB is supported.\n");
-		return -ENOTSUPP;
-	}
-
 	vsc8531 = devm_kzalloc(&phydev->mdio.dev, sizeof(*vsc8531), GFP_KERNEL);
 	if (!vsc8531)
 		return -ENOMEM;
@@ -2587,9 +2576,8 @@ static struct phy_driver vsc85xx_driver[] = {
 	.config_inband  = vsc85xx_config_inband,
 },
 {
-	.phy_id		= PHY_ID_VSC856X,
+	PHY_ID_MATCH_EXACT(PHY_ID_VSC856X),
 	.name		= "Microsemi GE VSC856X SyncE",
-	.phy_id_mask	= 0xfffffff0,
 	/* PHY_GBIT_FEATURES */
 	.soft_reset	= &genphy_soft_reset,
 	.config_init    = &vsc8584_config_init,
@@ -2625,7 +2613,7 @@ static struct phy_driver vsc85xx_driver[] = {
 	.suspend	= &genphy_suspend,
 	.resume		= &genphy_resume,
 	.remove		= &vsc85xx_remove,
-	.probe		= &vsc8574_probe,
+	.probe		= &vsc8584_probe,
 	.set_wol	= &vsc85xx_wol_set,
 	.get_wol	= &vsc85xx_wol_get,
 	.get_tunable	= &vsc85xx_get_tunable,
@@ -2648,12 +2636,12 @@ static struct phy_driver vsc85xx_driver[] = {
 	.config_aneg    = &vsc85xx_config_aneg,
 	.aneg_done	= &genphy_aneg_done,
 	.read_status	= &vsc85xx_read_status,
-	.handle_interrupt = vsc85xx_handle_interrupt,
+	.handle_interrupt = vsc8584_handle_interrupt,
 	.config_intr    = &vsc85xx_config_intr,
 	.suspend	= &genphy_suspend,
 	.resume		= &genphy_resume,
 	.remove		= &vsc85xx_remove,
-	.probe		= &vsc8574_probe,
+	.probe		= &vsc8584_probe,
 	.set_wol	= &vsc85xx_wol_set,
 	.get_wol	= &vsc85xx_wol_get,
 	.get_tunable	= &vsc85xx_get_tunable,
@@ -2667,9 +2655,8 @@ static struct phy_driver vsc85xx_driver[] = {
 	.config_inband  = vsc85xx_config_inband,
 },
 {
-	.phy_id		= PHY_ID_VSC8575,
+	PHY_ID_MATCH_EXACT(PHY_ID_VSC8575),
 	.name		= "Microsemi GE VSC8575 SyncE",
-	.phy_id_mask	= 0xfffffff0,
 	/* PHY_GBIT_FEATURES */
 	.soft_reset	= &genphy_soft_reset,
 	.config_init    = &vsc8584_config_init,
@@ -2693,9 +2680,8 @@ static struct phy_driver vsc85xx_driver[] = {
 	.config_inband  = vsc85xx_config_inband,
 },
 {
-	.phy_id		= PHY_ID_VSC8582,
+	PHY_ID_MATCH_EXACT(PHY_ID_VSC8582),
 	.name		= "Microsemi GE VSC8582 SyncE",
-	.phy_id_mask	= 0xfffffff0,
 	/* PHY_GBIT_FEATURES */
 	.soft_reset	= &genphy_soft_reset,
 	.config_init    = &vsc8584_config_init,
@@ -2719,9 +2705,8 @@ static struct phy_driver vsc85xx_driver[] = {
 	.config_inband  = vsc85xx_config_inband,
 },
 {
-	.phy_id		= PHY_ID_VSC8584,
+	PHY_ID_MATCH_EXACT(PHY_ID_VSC8584),
 	.name		= "Microsemi GE VSC8584 SyncE",
-	.phy_id_mask	= 0xfffffff0,
 	/* PHY_GBIT_FEATURES */
 	.soft_reset	= &genphy_soft_reset,
 	.config_init    = &vsc8584_config_init,