Merge tag 'leds-next-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds

Pull LED updates from Lee Jones:
 "New Support & Features:
   - Samsung S2MU005: Add support for the Samsung S2MU005 PMIC which
     includes flash and RGB LED controllers
   - Texas Instruments:
       - LP5812: Add support for the TI LP5812 LED driver
       - LP5860: Add support for the Texas Instruments LP5860 LED matrix
         driver via SPI

  Improvements & Fixes:
   - Core:
       - Adjust the brightness sysfs node documentation to clarify that
         only decimal values are accepted
       - Fix a race condition in the software blink logic when stopping
         blinking and setting brightness simultaneously
       - Introduce the `multi_max_intensity` sysfs attribute for
         multicolor LEDs to support hardware-based global brightness
         control
       - Replace OF-based device lookup with firmware node equivalents
         to support ACPI and software nodes
       - Return `ENODATA` when reading brightness from
         hardware-controlled LEDs
       - Set the coherent DMA mask to zero for the Samsung PMIC device
         to suppress unnecessary "DMA mask not set" messages
   - ams OSRAM AS3668: Fix a Kconfig symbol name mismatch in the
     Makefile that prevented the driver from being built
   - BlinkM: Fix spelling and comment style issues in the driver
   - DAC124S085: Declare the SPI command word as `__le16` to ensure
     correct endianness and pass sparse checks
   - GPIO Trigger: Use `GPIOD_FLAGS_BIT_NONEXCLUSIVE` to allow sharing
     GPIOs between the LED trigger and other drivers
   - NXP PCA9532: Fix an issue where the LED would stop blinking when
     changing brightness to a non-zero value
   - Qualcomm: Unify the user-visible company name to "Qualcomm" across
     flash LED config options
   - Qualcomm LPG: Optimize memory allocation by combining main
     structure and channels into a single allocation using flexible
     array members
   - Texas Instruments
       - LP5860: Add missing `CONFIG_OF` dependency to prevent build
         warnings
       - TPS6131x: Increase the overvoltage protection threshold to 6V
         to avoid false triggers with 5V input supplies
   - Userspace LEDs (uLEDs):
       - Fix a potential buffer overread by using `strnchr()` for name
         string validation
       - Return `-EFAULT` on `copy_to_user()` failure to properly handle
         read errors

  Cleanups & Refactoring:
   - Core:
       - Convert various `i2c_device_id` arrays to use named
         initializers for improved robustness and readability
       - Multi-color: Fix incorrect `KernelVersion` and `Date` tags for
         the `multi_max_intensity` ABI
   - Broadcom BCM63138 / ChromeOS EC: Move `MODULE_DEVICE_TABLE`
     declarations next to the ID tables for consistency
   - LP5812: Fix a sysfs ABI reference in the documentation
   - ST1202: Remove an unused legacy GPIO header include

  Device Tree Binding Updates:
   - Class: Document the keyboard backlight LED class naming
     conventions, including a new scheme for zoned backlights
   - Core: Dual-license the common LED bindings header under GPLv2
     and BSD-2-Clause
   - IR SPI LED: Add a new 30% duty-cycle value for the IR transmitter
     used in Xiaomi Redmi Note 8
   - Samsung S2M series:
       - Document the flash LED device bindings for Samsung S2M series
         PMICs
       - Document the pattern behavior for Samsung S2M series PMIC RGB
       - S2MU005: Add device tree bindings for the S2MU005 PMIC,
         including its flash and RGB LED sub-devices
   - TI LM3560: Document the TI LM3559 and LM3560 synchronous boost
     flash drivers"

* tag 'leds-next-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds: (30 commits)
  leds: tps6131x: Increase overvoltage protection threshold to 6V
  leds: Fix sysfs ABI date
  leds: Fix CONFIG_OF dependency for LEDS_LP5860_CORE
  leds: uleds: Fix potential buffer overread
  leds: Use named initializers for arrays of i2c_device_data
  leds: uleds: Return -EFAULT on copy_to_user() failure
  leds: core: Report ENODATA for brightness of hardware controlled LED
  leds: class: Use firmware nodes for device lookup
  Documentation: leds: Document pattern behavior of Samsung S2M series PMIC RGB LEDs
  leds: rgb: Add support for Samsung S2M series PMIC RGB LED device
  leds: flash: Add support for Samsung S2M series PMIC flash LED device
  dt-bindings: leds: Document Samsung S2M series PMIC flash LED device
  leds: core: Fix race condition for software blink
  leds: Adjust documentation of brightness sysfs node
  leds: dac124s085: Declare SPI command word as __le16
  leds: Introduce the multi_max_intensity sysfs attribute
  dt-bindings: leds: Document TI LM3560 Synchronous Boost Flash Driver
  leds: bcm63138/cros_ec: Move MODULE_DEVICE_TABLE next to the table itself
  leds: Add support for TI LP5860 LED driver chip
  Documentation: leds: leds-class: Document keyboard backlight LED class naming
  ...

2 files changed, 18 insertions, 5 deletions

diff --git a/Documentation/ABI/testing/sysfs-class-led b/Documentation/ABI/testing/sysfs-class-led
index 0313b82644f2..d4c918cc11a1 100644
--- a/Documentation/ABI/testing/sysfs-class-led
+++ b/Documentation/ABI/testing/sysfs-class-led
@@ -22,8 +22,8 @@ Description:
 		  For additional details please refer to
 		  Documentation/leds/leds-class-multicolor.rst.
 
-		The value is between 0 and
-		/sys/class/leds/<led>/max_brightness.
+		The value is between 0 and /sys/class/leds/<led>/max_brightness
+		and is represented by as a decimal.
 
 		Writing 0 to this file clears active trigger.
 
diff --git a/Documentation/ABI/testing/sysfs-class-led-multicolor b/Documentation/ABI/testing/sysfs-class-led-multicolor
index 16fc827b10cb..62ce58f393d6 100644
--- a/Documentation/ABI/testing/sysfs-class-led-multicolor
+++ b/Documentation/ABI/testing/sysfs-class-led-multicolor
@@ -16,9 +16,22 @@ Date:		March 2020
 KernelVersion:	5.9
 Contact:	Dan Murphy <dmurphy@ti.com>
 Description:	read/write
-		This file contains array of integers. Order of components is
-		described by the multi_index array. The maximum intensity should
-		not exceed /sys/class/leds/<led>/max_brightness.
+		This file contains an array of integers. The order of components
+		is described by the multi_index array. The maximum intensity value
+		supported by each color component is described by the multi_max_intensity
+		file. Writing intensity values larger than the maximum value of a
+		given color component will result in those values being clamped.
+
+		For additional details please refer to
+		Documentation/leds/leds-class-multicolor.rst.
+
+What:		/sys/class/leds/<led>/multi_max_intensity
+Date:		May 2026
+KernelVersion:	7.2
+Contact:	Armin Wolf <W_Armin@gmx.de>
+Description:	read
+		This file contains an array of integers describing the maximum
+		intensity value for each intensity component.
 
 		For additional details please refer to
 		Documentation/leds/leds-class-multicolor.rst.