Merge tag 'riscv-for-linus-6.18-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux

Pull more RISC-V updates from Paul Walmsley:

 - Support for the RISC-V-standardized RPMI interface.

   RPMI is a platform management communication mechanism between OSes
   running on application processors, and a remote platform management
   processor. Similar to ARM SCMI, TI SCI, etc. This includes irqchip,
   mailbox, and clk changes.

 - Support for the RISC-V-standardized MPXY SBI extension.

   MPXY is a RISC-V-specific standard implementing a shared memory
   mailbox between S-mode operating systems (e.g., Linux) and M-mode
   firmware (e.g., OpenSBI). It is part of this PR since one of its use
   cases is to enable M-mode firmware to act as a single RPMI client for
   all RPMI activity on a core (including S-mode RPMI activity).
   Includes a mailbox driver.

 - Some ACPI-related updates to enable the use of RPMI and MPXY.

 - The addition of Linux-wide memcpy_{from,to}_le32() static inline
   functions, for RPMI use.

 - An ACPI Kconfig change to enable boot logos on any ACPI-using
   architecture (including RISC-V)

 - A RISC-V defconfig change to add GPIO keyboard and event device
   support, for front panel shutdown or reboot buttons

* tag 'riscv-for-linus-6.18-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (26 commits)
  clk: COMMON_CLK_RPMI should depend on RISCV
  ACPI: support BGRT table on RISC-V
  MAINTAINERS: Add entry for RISC-V RPMI and MPXY drivers
  RISC-V: Enable GPIO keyboard and event device in RV64 defconfig
  irqchip/riscv-rpmi-sysmsi: Add ACPI support
  mailbox/riscv-sbi-mpxy: Add ACPI support
  irqchip/irq-riscv-imsic-early: Export imsic_acpi_get_fwnode()
  ACPI: RISC-V: Add RPMI System MSI to GSI mapping
  ACPI: RISC-V: Add support to update gsi range
  ACPI: RISC-V: Create interrupt controller list in sorted order
  ACPI: scan: Update honor list for RPMI System MSI
  ACPI: Add support for nargs_prop in acpi_fwnode_get_reference_args()
  ACPI: property: Refactor acpi_fwnode_get_reference_args() to support nargs_prop
  irqchip: Add driver for the RPMI system MSI service group
  dt-bindings: Add RPMI system MSI interrupt controller bindings
  dt-bindings: Add RPMI system MSI message proxy bindings
  clk: Add clock driver for the RISC-V RPMI clock service group
  dt-bindings: clock: Add RPMI clock service controller bindings
  dt-bindings: clock: Add RPMI clock service message proxy bindings
  mailbox: Add RISC-V SBI message proxy (MPXY) based mailbox driver
  ...

2 files changed, 175 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/mailbox/riscv,rpmi-shmem-mbox.yaml b/Documentation/devicetree/bindings/mailbox/riscv,rpmi-shmem-mbox.yaml
new file mode 100644
index 000000000000..3aabc52a0c03
--- /dev/null
+++ b/Documentation/devicetree/bindings/mailbox/riscv,rpmi-shmem-mbox.yaml
@@ -0,0 +1,124 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mailbox/riscv,rpmi-shmem-mbox.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: RISC-V Platform Management Interface (RPMI) shared memory mailbox
+
+maintainers:
+  - Anup Patel <anup@brainfault.org>
+
+description: |
+  The RISC-V Platform Management Interface (RPMI) [1] defines a common shared
+  memory based RPMI transport. This RPMI shared memory transport integrates as
+  mailbox controller in the SBI implementation or supervisor software whereas
+  each RPMI service group is mailbox client in the SBI implementation and
+  supervisor software.
+
+  ===========================================
+  References
+  ===========================================
+
+  [1] RISC-V Platform Management Interface (RPMI) v1.0 (or higher)
+      https://github.com/riscv-non-isa/riscv-rpmi/releases
+
+properties:
+  compatible:
+    const: riscv,rpmi-shmem-mbox
+
+  reg:
+    minItems: 2
+    items:
+      - description: A2P request queue base address
+      - description: P2A acknowledgment queue base address
+      - description: P2A request queue base address
+      - description: A2P acknowledgment queue base address
+      - description: A2P doorbell address
+
+  reg-names:
+    minItems: 2
+    items:
+      - const: a2p-req
+      - const: p2a-ack
+      - enum: [ p2a-req, a2p-doorbell ]
+      - const: a2p-ack
+      - const: a2p-doorbell
+
+  interrupts:
+    maxItems: 1
+    description:
+      The RPMI shared memory transport supports P2A doorbell as a wired
+      interrupt and this property specifies the interrupt source.
+
+  msi-parent:
+    description:
+      The RPMI shared memory transport supports P2A doorbell as a system MSI
+      and this property specifies the target MSI controller.
+
+  riscv,slot-size:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 64
+    description:
+      Power-of-2 RPMI slot size of the RPMI shared memory transport.
+
+  riscv,a2p-doorbell-value:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 0x1
+    description:
+      Value written to the 32-bit A2P doorbell register.
+
+  riscv,p2a-doorbell-sysmsi-index:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      The RPMI shared memory transport supports P2A doorbell as a system MSI
+      and this property specifies system MSI index to be used for configuring
+      the P2A doorbell MSI.
+
+  "#mbox-cells":
+    const: 1
+    description:
+      The first cell specifies RPMI service group ID.
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - riscv,slot-size
+  - "#mbox-cells"
+
+anyOf:
+  - required:
+      - interrupts
+  - required:
+      - msi-parent
+
+additionalProperties: false
+
+examples:
+  - |
+    // Example 1 (RPMI shared memory with only 2 queues):
+    mailbox@10080000 {
+        compatible = "riscv,rpmi-shmem-mbox";
+        reg = <0x10080000 0x10000>,
+              <0x10090000 0x10000>;
+        reg-names = "a2p-req", "p2a-ack";
+        msi-parent = <&imsic_mlevel>;
+        riscv,slot-size = <64>;
+        #mbox-cells = <1>;
+    };
+  - |
+    // Example 2 (RPMI shared memory with only 4 queues):
+    mailbox@10001000 {
+        compatible = "riscv,rpmi-shmem-mbox";
+        reg = <0x10001000 0x800>,
+              <0x10001800 0x800>,
+              <0x10002000 0x800>,
+              <0x10002800 0x800>,
+              <0x10003000 0x4>;
+        reg-names = "a2p-req", "p2a-ack", "p2a-req", "a2p-ack", "a2p-doorbell";
+        msi-parent = <&imsic_mlevel>;
+        riscv,slot-size = <64>;
+        riscv,a2p-doorbell-value = <0x00008000>;
+        #mbox-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/mailbox/riscv,sbi-mpxy-mbox.yaml b/Documentation/devicetree/bindings/mailbox/riscv,sbi-mpxy-mbox.yaml
new file mode 100644
index 000000000000..061437a0b45a
--- /dev/null
+++ b/Documentation/devicetree/bindings/mailbox/riscv,sbi-mpxy-mbox.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mailbox/riscv,sbi-mpxy-mbox.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: RISC-V SBI Message Proxy (MPXY) extension based mailbox
+
+maintainers:
+  - Anup Patel <anup@brainfault.org>
+
+description: |
+  The RISC-V SBI Message Proxy (MPXY) extension [1] allows supervisor
+  software to send messages through the SBI implementation (M-mode
+  firmware or HS-mode hypervisor). The underlying message protocol
+  and message format used by the supervisor software could be some
+  other standard protocol compatible with the SBI MPXY extension
+  (such as RISC-V Platform Management Interface (RPMI) [2]).
+
+  ===========================================
+  References
+  ===========================================
+
+  [1] RISC-V Supervisor Binary Interface (SBI) v3.0 (or higher)
+      https://github.com/riscv-non-isa/riscv-sbi-doc/releases
+
+  [2] RISC-V Platform Management Interface (RPMI) v1.0 (or higher)
+      https://github.com/riscv-non-isa/riscv-rpmi/releases
+
+properties:
+  compatible:
+    const: riscv,sbi-mpxy-mbox
+
+  "#mbox-cells":
+    const: 2
+    description:
+      The first cell specifies channel_id of the SBI MPXY channel,
+      the second cell specifies MSG_PROT_ID of the SBI MPXY channel
+
+required:
+  - compatible
+  - "#mbox-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    mailbox {
+          compatible = "riscv,sbi-mpxy-mbox";
+          #mbox-cells = <2>;
+    };