Merge tag 'mfd-next-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd

Pull MFD updates from Lee Jones:
 "Core Framework:
   - Document (kerneldoc) core mfd_add_devices() API

  New Drivers:
   - Altera SOCFPGA System Manager
   - Maxim MAX77650/77651 PMIC
   - Maxim MAX77663 PMIC
   - ST Multi-Function eXpander (STMFX)

  New Device Support:
   - LEDs support in Intel Cherry Trail Whiskey Cove PMIC
   - RTC support in SAMSUNG Electronics S2MPA01 PMIC
   - SAM9X60 support in Atmel HLCDC (High-end LCD Controller)
   - USB X-Powers AXP 8xx PMICs
   - Integrated Sensor Hub (ISH) in ChromeOS EC
   - USB PD Logger in ChromeOS EC
   - AXP223 in X-Powers AXP series PMICs
   - Power Supply in X-Powers AXP 803 PMICs
   - Comet Lake in Intel Low Power Subsystem
   - Fingerprint MCU in ChromeOS EC
   - Touchpad MCU in ChromeOS EC
   - Move TI LM3532 support to LED

  New Functionality:
   - max77650, max77620: Add/extend DT support
   - max77620 power-off
   - syscon clocking
   - croc_ec host sleep event

  Fix-ups:
   - Trivial; Formatting, spelling, etc; Kconfig, sec-core, ab8500-debugfs
   - Remove unused functionality; rk808, da9063-*
   - SPDX conversion; da9063-*, atmel-*,
   - Adapt/add new register definitions; cs47l35-tables, cs47l90-tables, imx6q-iomuxc-gpr
   - Fix-up DT bindings; ti-lmu, cirrus,lochnagar
   - Simply obtaining driver data; ssbi, t7l66xb, tc6387xb, tc6393xb

  Bug Fixes:
   - Fix incorrect defined values; max77620, da9063
   - Fix device initialisation; twl6040
   - Reset device on init; intel-lpss
   - Fix build warnings when !OF; sun6i-prcm
   - Register OF match tables; tps65912-spi
   - Fix DMI matching; intel_quark_i2c_gpio"

* tag 'mfd-next-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (65 commits)
  mfd: Use dev_get_drvdata() directly
  mfd: cros_ec: Instantiate properly CrOS Touchpad MCU device
  mfd: cros_ec: Instantiate properly CrOS FP MCU device
  mfd: cros_ec: Update the EC feature codes
  mfd: intel-lpss: Add Intel Comet Lake PCI IDs
  mfd: lochnagar: Add links to binding docs for sound and hwmon
  mfd: ab8500-debugfs: Fix a typo ("deubgfs")
  mfd: imx6sx: Add MQS register definition for iomuxc gpr
  dt-bindings: mfd: LMU: Fix lm3632 dt binding example
  mfd: intel_quark_i2c_gpio: Adjust IOT2000 matching
  mfd: da9063: Fix OTP control register names to match datasheets for DA9063/63L
  mfd: tps65912-spi: Add missing of table registration
  mfd: axp20x: Add USB power supply mfd cell to AXP803
  mfd: sun6i-prcm: Fix build warning for non-OF configurations
  mfd: intel-lpss: Set the device in reset state when init
  platform/chrome: Add support for v1 of host sleep event
  mfd: cros_ec: Add host_sleep_event_v1 command
  mfd: cros_ec: Instantiate the CrOS USB PD logger driver
  mfd: cs47l90: Make DAC_AEC_CONTROL_2 readable
  mfd: cs47l35: Make DAC_AEC_CONTROL_2 readable
  ...

6 files changed, 102 insertions, 3 deletions

diff --git a/Documentation/devicetree/bindings/mfd/atmel-hlcdc.txt b/Documentation/devicetree/bindings/mfd/atmel-hlcdc.txt
index 3f643ef121ff..5f8880cc757e 100644
--- a/Documentation/devicetree/bindings/mfd/atmel-hlcdc.txt
+++ b/Documentation/devicetree/bindings/mfd/atmel-hlcdc.txt
@@ -7,6 +7,7 @@ Required properties:
    "atmel,sama5d2-hlcdc"
    "atmel,sama5d3-hlcdc"
    "atmel,sama5d4-hlcdc"
+   "microchip,sam9x60-hlcdc"
  - reg: base address and size of the HLCDC device registers.
  - clock-names: the name of the 3 clocks requested by the HLCDC device.
    Should contain "periph_clk", "sys_clk" and "slow_clk".
diff --git a/Documentation/devicetree/bindings/mfd/cirrus,lochnagar.txt b/Documentation/devicetree/bindings/mfd/cirrus,lochnagar.txt
index 004b0158cf4d..3bf92ad37fa1 100644
--- a/Documentation/devicetree/bindings/mfd/cirrus,lochnagar.txt
+++ b/Documentation/devicetree/bindings/mfd/cirrus,lochnagar.txt
@@ -19,6 +19,8 @@ And these documents for the required sub-node binding details:
   [4] Clock: ../clock/cirrus,lochnagar.txt
   [5] Pinctrl: ../pinctrl/cirrus,lochnagar.txt
   [6] Regulator: ../regulator/cirrus,lochnagar.txt
+  [7] Sound: ../sound/cirrus,lochnagar.txt
+  [8] Hardware Monitor: ../hwmon/cirrus,lochnagar.txt
 
 Required properties:
 
@@ -41,6 +43,11 @@ Optional sub-nodes:
   - Bindings for the regulator components, see [6]. Only available on
     Lochnagar 2.
 
+  - lochnagar-sc : Binding for the sound card components, see [7].
+                   Only available on Lochnagar 2.
+  - lochnagar-hwmon : Binding for the hardware monitor components, see [8].
+                      Only available on Lochnagar 2.
+
 Optional properties:
 
   - present-gpios : Host present line, indicating the presence of a
@@ -65,4 +72,14 @@ lochnagar: lochnagar@22 {
 		compatible = "cirrus,lochnagar-pinctrl";
 		...
 	};
+
+	lochnagar-sc {
+		compatible = "cirrus,lochnagar2-soundcard";
+		...
+	};
+
+	lochnagar-hwmon {
+		compatible = "cirrus,lochnagar2-hwmon";
+		...
+	};
 };
diff --git a/Documentation/devicetree/bindings/mfd/max77620.txt b/Documentation/devicetree/bindings/mfd/max77620.txt
index 9c16d51cc15b..5a642a51d58e 100644
--- a/Documentation/devicetree/bindings/mfd/max77620.txt
+++ b/Documentation/devicetree/bindings/mfd/max77620.txt
@@ -4,7 +4,8 @@ Required properties:
 -------------------
 - compatible: Must be one of
 		"maxim,max77620"
-		"maxim,max20024".
+		"maxim,max20024"
+		"maxim,max77663"
 - reg: I2C device address.
 
 Optional properties:
@@ -17,6 +18,11 @@ Optional properties:
 			IRQ numbers for different interrupt source of MAX77620
 			are defined at dt-bindings/mfd/max77620.h.
 
+- system-power-controller: Indicates that this PMIC is controlling the
+			   system power, see [1] for more details.
+
+[1] Documentation/devicetree/bindings/power/power-controller.txt
+
 Optional subnodes and their properties:
 =======================================
 
@@ -105,6 +111,7 @@ Optional properties:
 Here supported time periods by device in microseconds are as follows:
 MAX77620 supports 40, 80, 160, 320, 640, 1280, 2560 and 5120 microseconds.
 MAX20024 supports 20, 40, 80, 160, 320, 640, 1280 and 2540 microseconds.
+MAX77663 supports 20, 40, 80, 160, 320, 640, 1280 and 2540 microseconds.
 
 -maxim,power-ok-control: configure map power ok bit
 			1: Enables POK(Power OK) to control nRST_IO and GPIO1
diff --git a/Documentation/devicetree/bindings/mfd/max77650.txt b/Documentation/devicetree/bindings/mfd/max77650.txt
new file mode 100644
index 000000000000..b529d8d19335
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/max77650.txt
@@ -0,0 +1,46 @@
+MAX77650 ultra low-power PMIC from Maxim Integrated.
+
+Required properties:
+-------------------
+- compatible:		Must be "maxim,max77650"
+- reg:			I2C device address.
+- interrupts:		The interrupt on the parent the controller is
+			connected to.
+- interrupt-controller: Marks the device node as an interrupt controller.
+- #interrupt-cells:	Must be <2>.
+
+- gpio-controller:	Marks the device node as a gpio controller.
+- #gpio-cells:		Must be <2>. The first cell is the pin number and
+			the second cell is used to specify the gpio active
+			state.
+
+Optional properties:
+--------------------
+gpio-line-names:	Single string containing the name of the GPIO line.
+
+The GPIO-controller module is represented as part of the top-level PMIC
+node. The device exposes a single GPIO line.
+
+For device-tree bindings of other sub-modules (regulator, power supply,
+LEDs and onkey) refer to the binding documents under the respective
+sub-system directories.
+
+For more details on GPIO bindings, please refer to the generic GPIO DT
+binding document <devicetree/bindings/gpio/gpio.txt>.
+
+Example:
+--------
+
+	pmic@48 {
+		compatible = "maxim,max77650";
+		reg = <0x48>;
+
+		interrupt-controller;
+		interrupt-parent = <&gpio2>;
+		#interrupt-cells = <2>;
+		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "max77650-charger";
+	};
diff --git a/Documentation/devicetree/bindings/mfd/stmfx.txt b/Documentation/devicetree/bindings/mfd/stmfx.txt
new file mode 100644
index 000000000000..f0c2f7fcf5c7
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/stmfx.txt
@@ -0,0 +1,28 @@
+STMicroelectonics Multi-Function eXpander (STMFX) Core bindings
+
+ST Multi-Function eXpander (STMFX) is a slave controller using I2C for
+communication with the main MCU. Its main features are GPIO expansion, main
+MCU IDD measurement (IDD is the amount of current that flows through VDD) and
+resistive touchscreen controller.
+
+Required properties:
+- compatible: should be "st,stmfx-0300".
+- reg: I2C slave address of the device.
+- interrupts: interrupt specifier triggered by MFX_IRQ_OUT signal.
+  Please refer to ../interrupt-controller/interrupt.txt
+
+Optional properties:
+- drive-open-drain: configure MFX_IRQ_OUT as open drain.
+- vdd-supply: phandle of the regulator supplying STMFX.
+
+Example:
+
+	stmfx: stmfx@42 {
+		compatible = "st,stmfx-0300";
+		reg = <0x42>;
+		interrupts = <8 IRQ_TYPE_EDGE_RISING>;
+		interrupt-parent = <&gpioi>;
+		vdd-supply = <&v3v3>;
+	};
+
+Please refer to ../pinctrl/pinctrl-stmfx.txt for STMFX GPIO expander function bindings.
diff --git a/Documentation/devicetree/bindings/mfd/ti-lmu.txt b/Documentation/devicetree/bindings/mfd/ti-lmu.txt
index 980394d701a7..86ca786d54fc 100644
--- a/Documentation/devicetree/bindings/mfd/ti-lmu.txt
+++ b/Documentation/devicetree/bindings/mfd/ti-lmu.txt
@@ -104,8 +104,8 @@ lm3632@11 {
 	regulators {
 		compatible = "ti,lm363x-regulator";
 
-		ti,lcm-en1-gpio = <&pioC 0 GPIO_ACTIVE_HIGH>; /* PC0 */
-		ti,lcm-en2-gpio = <&pioC 1 GPIO_ACTIVE_HIGH>; /* PC1 */
+		enable-gpios = <&pioC 0 GPIO_ACTIVE_HIGH>,
+			       <&pioC 1 GPIO_ACTIVE_HIGH>;
 
 		vboost {
 			regulator-name = "lcd_boost";