diff options
| author | Linus Torvalds <torvalds@linux-foundation.org> | 2026-06-17 10:21:00 +0100 |
|---|---|---|
| committer | Linus Torvalds <torvalds@linux-foundation.org> | 2026-06-17 10:21:00 +0100 |
| commit | 4b99990cdf9560e8a071640baf19f312e6ae02f4 (patch) | |
| tree | ba3c58e860666130caf5ae3bf386b6dbfbe59b04 /Documentation/devicetree/bindings | |
| parent | 9c87e61e3c5797277407ba5eae4eac8a52be3fa3 (diff) | |
| parent | 52d4ab1ca790a668cc8f2c27017138b1c467168c (diff) | |
Merge tag 'drm-next-2026-06-17' of https://gitlab.freedesktop.org/drm/kernel
Pull drm updates from Dave Airlie:
"Highlights:
- xe: add initial CRI platform support
- amdgpu: initial HDMI 2.1 FRL support
- rust: add some new type concepts for device lifetimes
- scheduler: moves to a fair algorithm and lots of cleanups
But it's mostly the usual mountain of changes across the board.
core:
- add docbook for DRM_IOCTL_SYNCOBJ_EVENTFD
- change signature of drm_connector_attach_hdr_output_metadata_property
- dedup counter and timestamp retrieval in vblank code
- parse AMD VSDB v3 in CTA extension blocks
- add P230, Y7, XYYY2101010, T430, XVUY210101010 formats
- don't call drop master on file close if not master
- use drm_printf_indent in atomic / bridge
- fix 32b format descriptions
- docs: fix toctree
- hdmi: add common TMDS character rates
- fix drm_syncobj_find_fence leak
rust:
- introduce Higher-Ranked lifetime types
- replace drvdata with scoped registration data
- add GPUVM immediate mode abstraction for rust GPU drivers
- introduce DeviceContext type state for drm::Device
bridge:
- clarify drm_bridge_get/put
- create drm_get_bridge_by_endpoint and use it
- analogix_dp: add panel probing
- ite-it6211 - use drm audio hdmi helpers
buddy:
- add lockdep annotations
dp:
- add PR and VRR updates
- mst: fix buffer overflows
- add Adaptive Sync SDP decoding support
- fix OOB reads in dp-mst
ttm:
- bump fpfn/lpfn to 64-bit
scheduler:
- change default to fair scheduler
- map runqueue 1:1 with scheduler
dma-buf:
- port selftests to kunit
- convert dma-buf system/heap allocators to module
- add separate DMABUF_HEAPS_SYSTEM_CC_SHARED Kconfig
udmabuf:
- revert hugetlb support
- fix error with CONFIG_DMA_API_DEBUG
dma-fence:
- fix tracepoints lifetime
- remove unused signal on any support
ras:
- add clear error counter netlink command to drm ras
gpusvm:
- reject VMAs with VM_IO or VM_PFNMAP when creating SVM ranges
- use IOVA allocations
pagemap:
- use IOVA allocations
panels:
- update to use ref counts
- add support for CSW PNB601LS1-2, LGD LP116WHA-SPB1
- add support for waveshare panels
- CMN N116BCN-EA1, CMN N140HCA-EEK, IVO M140NWFQ R5,
- IVO, R140NWFW R0, BOE NT140*, BOE NV133FHM-N4F,
- AUO B140*, AUO B133HAN06.6 and AUO B116XTN02.3 eDP panels
- Surface Pro 12 Panel
xe:
- add CRI PCI-IDs
- debugfs add multi-lrc info
- engine init cleanup
- PF fair scheduling auto provisioning
- system controller support for CRI/Xe3p
- PXP state machine fixes
- Reset/wedge/unload corner case fixes
- Wedge path memory allocation fixes
- PAT type cleanups
- Reject unsafe PAT for CPU cached memory
- OA improvements for CRI device memory
- kernel doc syntax in xe headers
- xe_drm.h documentation fixes
- include guard cleanups
- VF CCS memory pool
- i915/xe step unification
- Xe3p GT tuning fixes
- forcewake cleanup in GT and GuC
- admin-only PF mode
- enable hwmon energy attributes for CRI
- enable GT_MI_USER_INTERRUPT
- refactor emit functions
- oa workarounds
- multi_queue: allow QUEUE_TIMESTAMP register
- convert stolen memory to ttm range manager
- use xe2 style blitter as a feature flag
- make drm_driver const
- add/use IRQ page to HW engine definition
- fix oops when display disabled
i915:
- enable PIPEDMC_ERROR interrupt
- more common display code refactoring
- restructure DP/HDMI sink format handling
- eliminate FB usage from lowlevel pinning code
- panel replay bw optimization
- integrate sharpness filter into the scaler
- new fb_pin abstraction for xe/i915 fb transparent handling
- skip inactive MST connectors on HDCP
- start switching to display specific registers
- use polling when irq unavailable
- Adaptive-sync SDP prep
amdgpu:
- use drm_display_info for AMD VSDB data
- Initial HDMI 2.1 FRL support
- Initial DCN 4.2.1 support
- GART fixes for non-4k pages
- GC 11.5.6/SDMA 6.4.0/and other new IPs
- GFX9/DCE6/Hawaii/SDMA4/GART/Userq fixes
- Finish support for using multiple SDMA queues for TTM operations
- SWSMU updates
- GC 12.1 updates
- SMU 15.0.8 updates
- DCN 4.2 updates
- DC type conversion fixes
- Enable DC power module
- Replay/PSR updates
- SMU 13.x updates
- Compute queue quantum MQD updates
- ASPM fix
- Align VKMS with common implementation
- DC analog support fixes
- UVD 3 fixes
- TCC harvesting fixes for SI
- GC 11 APU module reload fix
- NBIO 6.3.2 support
- IH 7.1 updates
- DC cursor fixes
- VCN/JPEG user fence fixes
- DC support for connectors without DDC
- Prefer ROM BAR for default VGA device
- DC bandwidth fixes
- Add PTL support for profiler
- Introduce dc_plane_cm and migrate surface update color path
- Add FRL registers for HDMI 2.1
- Restructure VM state machine
- Auxless ALPM support
- GEM_OP locking/warning fixes
- switch to system_dfl_wq
amdkfd:
- GPUVM TLB flush fix
- Hotplug fix
- Boundary check fixes
- SVM fixes
- CRIU fixes
- add profiler API
- MES 12.1 updates
msm:
- core:
- fix shrinker documentation
- IFPC enabled for gen8
- PERFCNTR_CONFIG ioctl support
- GPU:
- reworked UBWC handling
- a810 support
- MDSS:
- add support for Milos platform
- reworked UBWC handling
- DisplayPort:
- reworked HPD handling as prep for MST
- DPU:
- Milos platform support
- reworked UBWC handling
- DSI:
- Milos platform support
nova:
- Hopper/Blackwell enablement (GH100/GB100/GB202)
- FSP support
- 32-bit firmware support
- HAL functions
- refactor GSP boot/unload
- GA100 support
- VBIOS hardening/refactoring
- Adopt higher order lifetime types
tyr:
- define register blocks
- add shmem backed GEM objects
- adopt higher order lifetime types
- move clock cleanup into Drop
radeon:
- Hawaii SMU fixes
- CS parser fix
- use struct drm_edid instead of edid
amdxdna:
- export per-client BO memory via fdinfo
- AIE4 device support
- support medium/lower power modes
- expandable device heap support
- revert read-only user-pointer BO mappings
ivpu:
- support frequency limiting
panthor:
- enable GEM shrinker support
- add eviction and reclaim info to fdinfo
v3d:
- enable runtime PM
mgag200:
- support XRGB1555 + C8
ast:
- support XRGB1555 + C8
- use constants for lots of registers
- fix register handling
imagination:
- fence handling refactoring
nouveau:
- fix sched double call
- expose VBIOS on GSP-RM systems
- add GA100 support
virtio:
- add VIRTIO_GPU_F_BLOB_ALIGNMENT flag
- add deferred mapping support
gud:
- add RCade Display Adapter
hibmc:
- fix no connectors usage
mediatek:
- hdmi: convert error handling
- simplify mtk_crtc allocation
exynos:
- move fbdev emulation to drm client buffers
- use drm format helpers for geometry/size
- adopt core DMA tracking
- fix framebuffer offset handling
renesas:
- add RZ/T2H SOC support
versilicon:
- add cursor plane support
tegra:
- use drm client for framebuffer"
* tag 'drm-next-2026-06-17' of https://gitlab.freedesktop.org/drm/kernel: (1731 commits)
dma-buf: move system_cc_shared heap under separate Kconfig
accel/amdxdna: Clear sva pointer after unbind
agp/amd64: Fix broken error propagation in agp_amd64_probe()
accel/amdxdna: Require carveout when PASID and force_iova are disabled
drm/amdkfd: always resume_all after suspend_all
drm/amdgpu/gfx: move fault and EOP IRQ get/put to hw_init/hw_fini
drm/amd/display: Consult MCCS FreeSync cap only if requested & supported
drm/amd/pm: Use strscpy in profile mode parsing
drm/amdkfd: Fix infinite loop parsing CRAT with zero subtype length
drm/amdkfd: fix sysfs topology prop length on buffer truncation
drm/amdgpu: drop retry loop in amdgpu_hmm_range_get_pages
drm/amd/pm: bound OD parameter parsing to stack array size
drm/amd/pm: Stop pp_od_clk_voltage emit at PAGE_SIZE
drm/amdkfd: Unwind debug trap enable on copy_to_user failure
drm/amdgpu: validate the mes firmware version for gfx12.1
drm/amdgpu: validate the mes firmware version for gfx12
drm/amdgpu: compare MES firmware version ucode for gfx11
drm/amdkfd: Add bounds check for AMDKFD_IOC_WAIT_EVENTS
drm/amdgpu: restart the CS if some parts of the VM are still invalidated
drm/amd/display: use unsigned types for local pipe and REG_GET counters
...
Diffstat (limited to 'Documentation/devicetree/bindings')
23 files changed, 682 insertions, 7 deletions
diff --git a/Documentation/devicetree/bindings/display/bridge/lontium,lt9211.yaml b/Documentation/devicetree/bindings/display/bridge/lontium,lt9211.yaml index 9a6e9b25d14a..7cfe92a8bcd7 100644 --- a/Documentation/devicetree/bindings/display/bridge/lontium,lt9211.yaml +++ b/Documentation/devicetree/bindings/display/bridge/lontium,lt9211.yaml @@ -36,18 +36,56 @@ properties: properties: port@0: - $ref: /schemas/graph.yaml#/properties/port + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false description: Primary MIPI DSI port-1 for MIPI input or LVDS port-1 for LVDS input or DPI input. + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + + properties: + data-lanes: + description: array of physical DSI data lane indexes. + minItems: 1 + items: + - const: 1 + - const: 2 + - const: 3 + - const: 4 + + required: + - data-lanes + port@1: - $ref: /schemas/graph.yaml#/properties/port + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false description: Additional MIPI port-2 for MIPI input or LVDS port-2 for LVDS input. Used in combination with primary port-1 to drive higher resolution displays + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + + properties: + data-lanes: + description: array of physical DSI data lane indexes. + minItems: 1 + items: + - const: 1 + - const: 2 + - const: 3 + - const: 4 + + required: + - data-lanes + port@2: $ref: /schemas/graph.yaml#/properties/port description: @@ -99,6 +137,7 @@ examples: reg = <0>; endpoint { + data-lanes = <1 2 3 4>; remote-endpoint = <&dsi0_out>; }; }; diff --git a/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml b/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml index 7586d681bcc6..0363201f0e61 100644 --- a/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml +++ b/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml @@ -34,6 +34,7 @@ properties: - items: - enum: - doestek,dtc34lm85am # For the Doestek DTC34LM85AM Flat Panel Display (FPD) Transmitter + - idt,v103 # For the Triple 10-BIT LVDS Transmitter - onnn,fin3385 # OnSemi FIN3385 - ti,ds90c185 # For the TI DS90C185 FPD-Link Serializer - ti,ds90c187 # For the TI DS90C187 FPD-Link Serializer diff --git a/Documentation/devicetree/bindings/display/bridge/simple-bridge.yaml b/Documentation/devicetree/bindings/display/bridge/simple-bridge.yaml index e6808419f625..7636c24906ba 100644 --- a/Documentation/devicetree/bindings/display/bridge/simple-bridge.yaml +++ b/Documentation/devicetree/bindings/display/bridge/simple-bridge.yaml @@ -30,6 +30,7 @@ properties: - algoltek,ag6311 - asl-tek,cs5263 - dumb-vga-dac + - mstar,tsumu88adt3-lf-1 - parade,ps185hdm - radxa,ra620 - realtek,rtd2171 diff --git a/Documentation/devicetree/bindings/display/bridge/waveshare,dsi2dpi.yaml b/Documentation/devicetree/bindings/display/bridge/waveshare,dsi2dpi.yaml index 3820dd7e11af..4d34a92192bf 100644 --- a/Documentation/devicetree/bindings/display/bridge/waveshare,dsi2dpi.yaml +++ b/Documentation/devicetree/bindings/display/bridge/waveshare,dsi2dpi.yaml @@ -10,11 +10,14 @@ maintainers: - Joseph Guo <qijian.guo@nxp.com> description: - Waveshare bridge board is part of Waveshare panel which converts DSI to DPI. + Waveshare bridge board is part of Waveshare panel which converts DSI to DPI + or LVDS. properties: compatible: - const: waveshare,dsi2dpi + enum: + - waveshare,dsi2dpi + - waveshare,dsi2lvds reg: maxItems: 1 @@ -53,7 +56,7 @@ properties: port@1: $ref: /schemas/graph.yaml#/properties/port description: - Video port for MIPI DPI output panel. + Video port for MIPI DPI or LVDS output to the panel. required: - port@0 diff --git a/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml b/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml index a24fcb914418..dbc0613e427e 100644 --- a/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml +++ b/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml @@ -16,6 +16,7 @@ properties: - enum: - qcom,apq8064-dsi-ctrl - qcom,kaanapali-dsi-ctrl + - qcom,milos-dsi-ctrl - qcom,msm8226-dsi-ctrl - qcom,msm8916-dsi-ctrl - qcom,msm8953-dsi-ctrl @@ -339,6 +340,7 @@ allOf: compatible: contains: enum: + - qcom,milos-dsi-ctrl - qcom,msm8998-dsi-ctrl - qcom,sa8775p-dsi-ctrl - qcom,sar2130p-dsi-ctrl diff --git a/Documentation/devicetree/bindings/display/msm/gmu.yaml b/Documentation/devicetree/bindings/display/msm/gmu.yaml index 93e5e6e19754..8578c2f8122e 100644 --- a/Documentation/devicetree/bindings/display/msm/gmu.yaml +++ b/Documentation/devicetree/bindings/display/msm/gmu.yaml @@ -304,6 +304,36 @@ allOf: properties: compatible: contains: + const: qcom,adreno-gmu-810.0 + then: + properties: + reg: + items: + - description: Core GMU registers + reg-names: + items: + - const: gmu + clocks: + items: + - description: GPU AHB clock + - description: GMU clock + - description: GPU CX clock + - description: GPU AXI clock + - description: GPU MEMNOC clock + - description: GMU HUB clock + clock-names: + items: + - const: ahb + - const: gmu + - const: cxo + - const: axi + - const: memnoc + - const: hub + + - if: + properties: + compatible: + contains: const: qcom,adreno-gmu-840.1 then: properties: diff --git a/Documentation/devicetree/bindings/display/msm/gpu.yaml b/Documentation/devicetree/bindings/display/msm/gpu.yaml index 04b2328903ca..a40899e5ea58 100644 --- a/Documentation/devicetree/bindings/display/msm/gpu.yaml +++ b/Documentation/devicetree/bindings/display/msm/gpu.yaml @@ -416,6 +416,23 @@ allOf: compatible: contains: enum: + - qcom,adreno-44010000 + - qcom,adreno-44070001 + then: + properties: + reg: + minItems: 2 + maxItems: 2 + + reg-names: + minItems: 2 + maxItems: 2 + + - if: + properties: + compatible: + contains: + enum: - qcom,adreno-615.0 - qcom,adreno-618.0 - qcom,adreno-619.0 @@ -434,6 +451,8 @@ allOf: - qcom,adreno-43050a01 - qcom,adreno-43050c01 - qcom,adreno-43051401 + - qcom,adreno-44010000 + - qcom,adreno-44070001 then: # Starting with A6xx, the clocks are usually defined in the GMU node properties: diff --git a/Documentation/devicetree/bindings/display/msm/qcom,milos-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,milos-mdss.yaml new file mode 100644 index 000000000000..7010ffa0ae35 --- /dev/null +++ b/Documentation/devicetree/bindings/display/msm/qcom,milos-mdss.yaml @@ -0,0 +1,286 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/msm/qcom,milos-mdss.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Milos Display MDSS + +maintainers: + - Luca Weiss <luca.weiss@fairphone.com> + +description: + Milos MSM Mobile Display Subsystem(MDSS), which encapsulates sub-blocks like + DPU display controller, DSI and DP interfaces etc. + +$ref: /schemas/display/msm/mdss-common.yaml# + +properties: + compatible: + const: qcom,milos-mdss + + clocks: + items: + - description: Display AHB + - description: Display hf AXI + - description: Display core + + iommus: + maxItems: 1 + + interconnects: + items: + - description: Interconnect path from mdp0 port to the data bus + - description: Interconnect path from CPU to the reg bus + + interconnect-names: + items: + - const: mdp0-mem + - const: cpu-cfg + +patternProperties: + "^display-controller@[0-9a-f]+$": + type: object + additionalProperties: true + properties: + compatible: + const: qcom,milos-dpu + + "^displayport-controller@[0-9a-f]+$": + type: object + additionalProperties: true + properties: + compatible: + const: qcom,milos-dp + + "^dsi@[0-9a-f]+$": + type: object + additionalProperties: true + properties: + compatible: + contains: + const: qcom,milos-dsi-ctrl + + "^phy@[0-9a-f]+$": + type: object + additionalProperties: true + properties: + compatible: + const: qcom,milos-dsi-phy-4nm + +required: + - compatible + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,dsi-phy-28nm.h> + #include <dt-bindings/clock/qcom,milos-dispcc.h> + #include <dt-bindings/clock/qcom,milos-gcc.h> + #include <dt-bindings/clock/qcom,rpmh.h> + #include <dt-bindings/interconnect/qcom,icc.h> + #include <dt-bindings/interconnect/qcom,milos-rpmh.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/power/qcom,rpmhpd.h> + + display-subsystem@ae00000 { + compatible = "qcom,milos-mdss"; + reg = <0x0ae00000 0x1000>; + reg-names = "mdss"; + + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH 0>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>; + + resets = <&dispcc DISP_CC_MDSS_CORE_BCR>; + + interconnects = <&mmss_noc MASTER_MDP QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &cnoc_main SLAVE_DISPLAY_CFG QCOM_ICC_TAG_ACTIVE_ONLY>; + interconnect-names = "mdp0-mem", + "cpu-cfg"; + + power-domains = <&dispcc DISP_CC_MDSS_CORE_GDSC>; + + iommus = <&apps_smmu 0x1c00 0x2>; + + interrupt-controller; + #interrupt-cells = <1>; + + #address-cells = <1>; + #size-cells = <1>; + ranges; + + display-controller@ae01000 { + compatible = "qcom,milos-dpu"; + reg = <0x0ae01000 0x8f000>, + <0x0aeb0000 0x3000>; + reg-names = "mdp", + "vbif"; + + interrupts-extended = <&mdss 0>; + + clocks = <&gcc GCC_DISP_HF_AXI_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>, + <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + clock-names = "nrt_bus", + "iface", + "lut", + "core", + "vsync"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + assigned-clock-rates = <19200000>; + + operating-points-v2 = <&mdp_opp_table>; + + power-domains = <&rpmhpd RPMHPD_CX>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + dpu_intf1_out: endpoint { + remote-endpoint = <&mdss_dsi0_in>; + }; + }; + }; + + mdp_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-200000000 { + opp-hz = /bits/ 64 <200000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-342000000 { + opp-hz = /bits/ 64 <342000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-402000000 { + opp-hz = /bits/ 64 <402000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-535000000 { + opp-hz = /bits/ 64 <535000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + + opp-600000000 { + opp-hz = /bits/ 64 <600000000>; + required-opps = <&rpmhpd_opp_nom_l1>; + }; + + opp-630000000 { + opp-hz = /bits/ 64 <630000000>; + required-opps = <&rpmhpd_opp_turbo>; + }; + }; + }; + + dsi@ae94000 { + compatible = "qcom,milos-dsi-ctrl", "qcom,mdss-dsi-ctrl"; + reg = <0x0ae94000 0x1000>; + reg-names = "dsi_ctrl"; + + interrupts-extended = <&mdss 4>; + + clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>, + <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>, + <&dispcc DISP_CC_MDSS_PCLK0_CLK>, + <&dispcc DISP_CC_MDSS_ESC0_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>; + clock-names = "byte", + "byte_intf", + "pixel", + "core", + "iface", + "bus"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, + <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>; + assigned-clock-parents = <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>, + <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>; + + operating-points-v2 = <&mdss_dsi_opp_table>; + + power-domains = <&rpmhpd RPMHPD_CX>; + + phys = <&mdss_dsi0_phy>; + phy-names = "dsi"; + + #address-cells = <1>; + #size-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + mdss_dsi0_in: endpoint { + remote-endpoint = <&dpu_intf1_out>; + }; + }; + + port@1 { + reg = <1>; + + mdss_dsi0_out: endpoint { + }; + }; + }; + + mdss_dsi_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-187500000 { + opp-hz = /bits/ 64 <187500000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-358000000 { + opp-hz = /bits/ 64 <358000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + }; + }; + + mdss_dsi0_phy: phy@ae95000 { + compatible = "qcom,milos-dsi-phy-4nm"; + reg = <0x0ae95000 0x200>, + <0x0ae95200 0x300>, + <0x0ae95500 0x400>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", + "ref"; + + #clock-cells = <1>; + #phy-cells = <0>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm8650-dpu.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm8650-dpu.yaml index 134321b50897..aa0cf0ec5b93 100644 --- a/Documentation/devicetree/bindings/display/msm/qcom,sm8650-dpu.yaml +++ b/Documentation/devicetree/bindings/display/msm/qcom,sm8650-dpu.yaml @@ -18,6 +18,7 @@ properties: - qcom,eliza-dpu - qcom,glymur-dpu - qcom,kaanapali-dpu + - qcom,milos-dpu - qcom,sa8775p-dpu - qcom,sm8650-dpu - qcom,sm8750-dpu diff --git a/Documentation/devicetree/bindings/display/panel/chipwealth,ch13726a.yaml b/Documentation/devicetree/bindings/display/panel/chipwealth,ch13726a.yaml new file mode 100644 index 000000000000..c8d7b61037e6 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/chipwealth,ch13726a.yaml @@ -0,0 +1,67 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/chipwealth,ch13726a.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Chip Wealth Technology CH13726A AMOLED driver + +maintainers: + - Neil Armstrong <neil.armstrong@linaro.org> + +description: + Chip Wealth Technology CH13726A is a single-chip solution + for AMOLED connected using a MIPI-DSI video interface. + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + items: + - const: ayntec,thor-panel-bottom + - const: chipwealth,ch13726a + + reg: + maxItems: 1 + description: DSI virtual channel + + vdd-supply: true + vddio-supply: true + vdd1v2-supply: true + avdd-supply: true + + port: true + reset-gpios: true + rotation: true + +required: + - compatible + - reg + - vdd-supply + - vddio-supply + - vdd1v2-supply + - avdd-supply + - reset-gpios + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + dsi { + #address-cells = <1>; + #size-cells = <0>; + panel@0 { + compatible = "ayntec,thor-panel-bottom", "chipwealth,ch13726a"; + reg = <0>; + vdd1v2-supply = <&vreg_l11b_1p2>; + vddio-supply = <&vdd_disp_1v8>; + vdd-supply = <&vreg_l13b_3p0>; + avdd-supply = <&vdd_disp2_2v8>; + reset-gpios = <&tlmm 133 GPIO_ACTIVE_HIGH>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/panel/focaltech,ota7290b.yaml b/Documentation/devicetree/bindings/display/panel/focaltech,ota7290b.yaml new file mode 100644 index 000000000000..db6775f4d75c --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/focaltech,ota7290b.yaml @@ -0,0 +1,70 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/focaltech,ota7290b.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Focaltech OTA7290B DSI panels + +maintainers: + - Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + const: waveshare,8.8-dsi-touch-a + + reg: + maxItems: 1 + + vdd-supply: + description: supply regulator for VDD, usually 3.3V + + vdda-supply: + description: supply regulator for VDDA, 7-10V + + vcc-supply: + description: supply regulator for VCCIO, usually 1.5V + + reset-gpios: true + backlight: true + rotation: true + port: true + +required: + - compatible + - reg + - vdd-supply + - vcc-supply + - reset-gpios + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + dsi { + #address-cells = <1>; + #size-cells = <0>; + + panel@0 { + compatible = "waveshare,8.8-dsi-touch-a"; + reg = <0>; + vdd-supply = <&vdd>; + vcc-supply = <&vccio>; + reset-gpios = <&gpio 1 GPIO_ACTIVE_HIGH>; + backlight = <&backlight>; + + port { + endpoint { + remote-endpoint = <&mipi_out_panel>; + }; + }; + }; + }; + +... + diff --git a/Documentation/devicetree/bindings/display/panel/himax,hx83102.yaml b/Documentation/devicetree/bindings/display/panel/himax,hx83102.yaml index 66404b425af3..7667428bf9a8 100644 --- a/Documentation/devicetree/bindings/display/panel/himax,hx83102.yaml +++ b/Documentation/devicetree/bindings/display/panel/himax,hx83102.yaml @@ -30,6 +30,8 @@ properties: - starry,2082109qfh040022-50e # STARRY himax83102-j02 10.51" WUXGA TFT LCD panel - starry,himax83102-j02 + # Waveshare 12.3-DSI-TOUCH-A panel + - waveshare,12.3-dsi-touch-a - const: himax,hx83102 reg: diff --git a/Documentation/devicetree/bindings/display/panel/himax,hx8394.yaml b/Documentation/devicetree/bindings/display/panel/himax,hx8394.yaml index 84e840e0224f..83c343b02835 100644 --- a/Documentation/devicetree/bindings/display/panel/himax,hx8394.yaml +++ b/Documentation/devicetree/bindings/display/panel/himax,hx8394.yaml @@ -23,6 +23,8 @@ properties: - hannstar,hsd060bhw4 - microchip,ac40t08a-mipi-panel - powkiddy,x55-panel + - waveshare,5.0-dsi-touch-a + - waveshare,5.5-dsi-touch-a - const: himax,hx8394 - items: - enum: diff --git a/Documentation/devicetree/bindings/display/panel/ilitek,ili9881c.yaml b/Documentation/devicetree/bindings/display/panel/ilitek,ili9881c.yaml index d979701a00a8..42e35986fbf6 100644 --- a/Documentation/devicetree/bindings/display/panel/ilitek,ili9881c.yaml +++ b/Documentation/devicetree/bindings/display/panel/ilitek,ili9881c.yaml @@ -24,6 +24,7 @@ properties: - raspberrypi,dsi-7inch - startek,kd050hdfia020 - tdo,tl050hdv35 + - waveshare,7.0-dsi-touch-a - wanchanglong,w552946aaa - wanchanglong,w552946aba - const: ilitek,ili9881c @@ -34,6 +35,7 @@ properties: backlight: true port: true power-supply: true + iovcc-supply: true reset-gpios: true rotation: true diff --git a/Documentation/devicetree/bindings/display/panel/jadard,jd9365da-h3.yaml b/Documentation/devicetree/bindings/display/panel/jadard,jd9365da-h3.yaml index e39efb44ed42..4eae802de9fd 100644 --- a/Documentation/devicetree/bindings/display/panel/jadard,jd9365da-h3.yaml +++ b/Documentation/devicetree/bindings/display/panel/jadard,jd9365da-h3.yaml @@ -24,6 +24,12 @@ properties: - radxa,display-10hd-ad001 - radxa,display-8hd-ad002 - taiguanck,xti05101-01a + - waveshare,3.4-dsi-touch-c + - waveshare,4.0-dsi-touch-c + - waveshare,8.0-dsi-touch-a + - waveshare,9.0-dsi-touch-b + - waveshare,10.1-dsi-touch-a + - waveshare,10.1-dsi-touch-b - const: jadard,jd9365da-h3 reg: diff --git a/Documentation/devicetree/bindings/display/panel/novatek,nt35532.yaml b/Documentation/devicetree/bindings/display/panel/novatek,nt35532.yaml new file mode 100644 index 000000000000..ff6fdad7febf --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/novatek,nt35532.yaml @@ -0,0 +1,80 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/novatek,nt35532.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Novatek NT35532-based DSI display panels + +maintainers: + - Cristian Cozzolino <cristian_ci@protonmail.com> + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + items: + - enum: + - flipkart,rimob-panel-nt35532-cs + - const: novatek,nt35532 + + reg: + maxItems: 1 + + backlight: true + reset-gpios: true + + avdd-supply: + description: positive boost supply regulator + + avee-supply: + description: negative boost supply regulator + + vci-supply: + description: regulator that supplies the analog voltage + + vddam-supply: + description: power supply for MIPI interface + + vddi-supply: + description: regulator that supplies the I/O voltage + + port: true + +required: + - compatible + - reg + - reset-gpios + - vddi-supply + - port + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + dsi { + #address-cells = <1>; + #size-cells = <0>; + + panel@0 { + compatible = "flipkart,rimob-panel-nt35532-cs", "novatek,nt35532"; + reg = <0>; + + backlight = <&pmi8950_wled>; + reset-gpios = <&tlmm 61 GPIO_ACTIVE_LOW>; + avdd-supply = <&lab>; + avee-supply = <&ibb>; + vci-supply = <&pm8953_l17>; + vddi-supply = <&pm8953_l6>; + + port { + panel_in: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/display/panel/panel-lvds.yaml b/Documentation/devicetree/bindings/display/panel/panel-lvds.yaml index b31c67babaa8..b89f86bc0683 100644 --- a/Documentation/devicetree/bindings/display/panel/panel-lvds.yaml +++ b/Documentation/devicetree/bindings/display/panel/panel-lvds.yaml @@ -58,6 +58,10 @@ properties: - hydis,hv070wx2-1e0 # Jenson Display BL-JT60050-01A 7" WSVGA (1024x600) color TFT LCD LVDS panel - jenson,bl-jt60050-01a + # Riverdi RVT101HVLNWC00 10.1" WXGA (1280x800) TFT LCD LVDS panel + - riverdi,rvt101hvlnwc00 + # Riverdi RVT70HSLNWCA0 7.0" WSVGA (1024x600) TFT LCD LVDS panel + - riverdi,rvt70hslnwca0 # Samsung LTN070NL01 7.0" WSVGA (1024x600) TFT LCD LVDS panel - samsung,ltn070nl01 # Samsung LTN101AL03 10.1" WXGA (800x1280) TFT LCD LVDS panel diff --git a/Documentation/devicetree/bindings/display/panel/panel-simple-dsi.yaml b/Documentation/devicetree/bindings/display/panel/panel-simple-dsi.yaml index cc8d795df732..6d4133b91e7c 100644 --- a/Documentation/devicetree/bindings/display/panel/panel-simple-dsi.yaml +++ b/Documentation/devicetree/bindings/display/panel/panel-simple-dsi.yaml @@ -63,6 +63,8 @@ properties: - samsung,s6e3fa7-ams559nk06 # Shangai Top Display Optoelectronics 7" TL070WSH30 1024x600 TFT LCD panel - tdo,tl070wsh30 + # Team Source Display Technology 7" TST070WSBE-196C 1024x600 TFT LCD panel + - team-source-display,tst070wsbe-196c reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/display/panel/panel-simple.yaml b/Documentation/devicetree/bindings/display/panel/panel-simple.yaml index 3e41ed0ef5d5..21453f0d7ce2 100644 --- a/Documentation/devicetree/bindings/display/panel/panel-simple.yaml +++ b/Documentation/devicetree/bindings/display/panel/panel-simple.yaml @@ -31,6 +31,8 @@ properties: # Ampire AM-1280800N3TZQW-T00H 10.1" WQVGA TFT LCD panel - ampire,am-1280800n3tzqw-t00h + # Ampire AM-1280800W8TZQW-T00H 10.1" WXGA TFT LCD panel + - ampire,am-1280800w8tzqw-t00h # Ampire AM-480272H3TMQW-T01H 4.3" WQVGA TFT LCD panel - ampire,am-480272h3tmqw-t01h # Ampire AM-800480L1TMQW-T00H 5" WVGA TFT LCD panel @@ -97,6 +99,8 @@ properties: - dataimage,fg1001l0dsswmg01 # DataImage, Inc. 7" WVGA (800x480) TFT LCD panel with 24-bit parallel interface. - dataimage,scf0700c48ggu18 + # Displaytech DT050BTFT-PTS 5.0" 800x480 TFT LCD Panel + - displaytech,dt050btft-pts # DLC Display Co. DLC1010GIG 10.1" WXGA TFT LCD Panel - dlc,dlc1010gig # Emerging Display Technology Corp. 3.5" QVGA TFT LCD panel @@ -232,6 +236,8 @@ properties: - nec,nl12880bc20-05 # NEC LCD Technologies,Ltd. WQVGA TFT LCD panel - nec,nl4827hc19-05b + # NEC LCD Technologies,Ltd. VGA TFT LCD panel + - nec,nl6448bc33-70c # Netron-DY E231732 7.0" WSVGA TFT LCD panel - netron-dy,e231732 # Newhaven Display International 480 x 272 TFT LCD panel @@ -304,6 +310,8 @@ properties: - shelly,sca07010-bfn-lnn # Starry KR070PE2T 7" WVGA TFT LCD panel - starry,kr070pe2t + # Startek KD070HDFLD092 7" WSVGA TFT LCD panel + - startek,kd070hdfld092 # Startek KD070WVFPA043-C069A 7" TFT LCD panel - startek,kd070wvfpa # Team Source Display Technology TST043015CMHX 4.3" WQVGA TFT LCD panel @@ -341,10 +349,38 @@ properties: - vivax,tpc9150-panel # VXT 800x480 color TFT LCD panel - vxt,vl050-8048nt-c01 + # Waveshare 10.1" WXGA (1280x800) LCD panel + - waveshare,10.1inch-c-panel + # Waveshare 11.9" (320x1480) LCD panel + - waveshare,11.9inch-panel # Waveshare 13.3" FHD (1920x1080) LCD panel - waveshare,13.3inch-panel + # Waveshare 2.8" VGA (480x640) LCD panel + - waveshare,2.8inch-panel + # Waveshare 3.4" (800x800) LCD panel + - waveshare,3.4inch-c-panel + # Waveshare 4.0" WVGA (480x800) LCD panel + - waveshare,4.0inch-panel + # Waveshare 4.0" (720x720) LCD panel + - waveshare,4.0inch-c-panel + # Waveshare 5.0" WSVGA (1024x600) LCD panel + - waveshare,5.0inch-c-panel + # Waveshare 5.0" HD 720p (720x1280) LCD panel + - waveshare,5.0inch-d-panel + # Waveshare 6.25" (720x1560) LCD panel + - waveshare,6.25inch-panel # Waveshare 7.0" WSVGA (1024x600) LCD panel - waveshare,7.0inch-c-panel + # Waveshare 7.0" WXGA (1280x800) LCD panel + - waveshare,7.0inch-e-panel + # Waveshare 7.0" HD 720p (720x1280) LCD panel + - waveshare,7.0inch-h-panel + # Waveshare 7.9" (400x1280) LCD panel + - waveshare,7.9inch-panel + # Waveshare 8.0" WXGA (1280x800) LCD panel + - waveshare,8.0inch-c-panel + # Waveshare 8.8" (480x1920) LCD panel + - waveshare,8.8inch-panel # Winstar Display Corporation 3.5" QVGA (320x240) TFT LCD panel - winstar,wf35ltiacd # Yes Optoelectronics YTC700TLAG-05-201C 7" TFT LCD panel diff --git a/Documentation/devicetree/bindings/display/renesas,rzg2l-du.yaml b/Documentation/devicetree/bindings/display/renesas,rzg2l-du.yaml index 2cc66dcef870..7c84a9ecc7a7 100644 --- a/Documentation/devicetree/bindings/display/renesas,rzg2l-du.yaml +++ b/Documentation/devicetree/bindings/display/renesas,rzg2l-du.yaml @@ -21,6 +21,7 @@ properties: - renesas,r9a07g043u-du # RZ/G2UL - renesas,r9a07g044-du # RZ/G2{L,LC} - renesas,r9a09g057-du # RZ/V2H(P) + - renesas,r9a09g077-du # RZ/T2H - items: - enum: - renesas,r9a07g054-du # RZ/V2L @@ -28,6 +29,9 @@ properties: - items: - const: renesas,r9a09g056-du # RZ/V2N - const: renesas,r9a09g057-du # RZ/V2H(P) fallback + - items: + - const: renesas,r9a09g087-du # RZ/N2H + - const: renesas,r9a09g077-du # RZ/T2H fallback reg: maxItems: 1 @@ -83,7 +87,6 @@ required: - interrupts - clocks - clock-names - - resets - power-domains - ports - renesas,vsps @@ -95,13 +98,16 @@ allOf: properties: compatible: contains: - const: renesas,r9a07g043u-du + enum: + - renesas,r9a07g043u-du + - renesas,r9a09g077-du then: properties: ports: properties: port@0: description: DPI + port@1: false required: - port@0 @@ -137,6 +143,17 @@ allOf: required: - port@0 + - if: + properties: + compatible: + contains: + const: renesas,r9a09g077-du + then: + properties: + resets: false + else: + required: + - resets examples: # RZ/G2L DU diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml b/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml index db49b8ff8c74..9db9f84ad964 100644 --- a/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml +++ b/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml @@ -26,6 +26,7 @@ properties: - realtek,rtd1619-mali - renesas,r9a07g044-mali - renesas,r9a07g054-mali + - renesas,r9a08g046-mali - renesas,r9a09g047-mali - renesas,r9a09g056-mali - renesas,r9a09g057-mali @@ -150,6 +151,7 @@ allOf: enum: - renesas,r9a07g044-mali - renesas,r9a07g054-mali + - renesas,r9a08g046-mali - renesas,r9a09g047-mali - renesas,r9a09g056-mali - renesas,r9a09g057-mali diff --git a/Documentation/devicetree/bindings/phy/qcom,dsi-phy-7nm.yaml b/Documentation/devicetree/bindings/phy/qcom,dsi-phy-7nm.yaml index 966c70d746aa..f397ba3fa84a 100644 --- a/Documentation/devicetree/bindings/phy/qcom,dsi-phy-7nm.yaml +++ b/Documentation/devicetree/bindings/phy/qcom,dsi-phy-7nm.yaml @@ -20,6 +20,7 @@ properties: - qcom,dsi-phy-7nm - qcom,dsi-phy-7nm-8150 - qcom,kaanapali-dsi-phy-3nm + - qcom,milos-dsi-phy-4nm - qcom,sa8775p-dsi-phy-5nm - qcom,sar2130p-dsi-phy-5nm - qcom,sc7280-dsi-phy-7nm diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml index d31198268fee..5815d190638d 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.yaml +++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml @@ -437,6 +437,8 @@ patternProperties: description: Diodes, Inc. "^dioo,.*": description: Dioo Microcircuit Co., Ltd + "^displaytech,.*": + description: Displaytech Ltd. "^djn,.*": description: Shenzhen DJN Optronics Technology Co., Ltd "^dlc,.*": |