Merge tag 'char-misc-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc/IIO driver updates from Greg KH:
 "Here is the big set of char/misc/iio driver updates for 6.19-rc1. Lots
  of stuff in here including:

   - lots of IIO driver updates, cleanups, and additions

   - large interconnect driver changes as they get converted over to a
     dynamic system of ids

   - coresight driver updates

   - mwave driver updates

   - binder driver updates and changes

   - comedi driver fixes now that the fuzzers are being set loose on
     them

   - nvmem driver updates

   - new uio driver addition

   - lots of other small char/misc driver updates, full details in the
     shortlog

  All of these have been in linux-next for a while now"

* tag 'char-misc-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (304 commits)
  char: applicom: fix NULL pointer dereference in ac_ioctl
  hangcheck-timer: fix coding style spacing
  hangcheck-timer: Replace %Ld with %lld
  hangcheck-timer: replace printk(KERN_CRIT) with pr_crit
  uio: Add SVA support for PCI devices via uio_pci_generic_sva.c
  dt-bindings: slimbus: fix warning from example
  intel_th: Fix error handling in intel_th_output_open
  misc: rp1: Fix an error handling path in rp1_probe()
  char: xillybus: add WQ_UNBOUND to alloc_workqueue users
  misc: bh1770glc: use pm_runtime_resume_and_get() in power_state_store
  misc: cb710: Fix a NULL vs IS_ERR() check in probe()
  mux: mmio: Add suspend and resume support
  virt: acrn: split acrn_mmio_dev_res out of acrn_mmiodev
  greybus: gb-beagleplay: Fix timeout handling in bootloader functions
  greybus: add WQ_PERCPU to alloc_workqueue users
  char/mwave: drop typedefs
  char/mwave: drop printk wrapper
  char/mwave: remove printk tracing
  char/mwave: remove unneeded fops
  char/mwave: remove MWAVE_FUTZ_WITH_OTHER_DEVICES ifdeffery
  ...

31 files changed, 1140 insertions, 40 deletions

diff --git a/Documentation/devicetree/bindings/arm/qcom,coresight-tpdm.yaml b/Documentation/devicetree/bindings/arm/qcom,coresight-tpdm.yaml
index 4edc47483851..c349306f0d52 100644
--- a/Documentation/devicetree/bindings/arm/qcom,coresight-tpdm.yaml
+++ b/Documentation/devicetree/bindings/arm/qcom,coresight-tpdm.yaml
@@ -36,9 +36,12 @@ properties:
   $nodename:
     pattern: "^tpdm(@[0-9a-f]+)$"
   compatible:
-    items:
-      - const: qcom,coresight-tpdm
-      - const: arm,primecell
+    oneOf:
+      - items:
+          - const: qcom,coresight-static-tpdm
+      - items:
+          - const: qcom,coresight-tpdm
+          - const: arm,primecell
 
   reg:
     maxItems: 1
@@ -147,4 +150,18 @@ examples:
         };
       };
     };
+
+    turing-llm-tpdm {
+      compatible = "qcom,coresight-static-tpdm";
+
+      qcom,cmb-element-bits = <32>;
+
+      out-ports {
+        port {
+         turing_llm_tpdm_out: endpoint {
+           remote-endpoint = <&turing0_funnel_in1>;
+         };
+        };
+      };
+    };
 ...
diff --git a/Documentation/devicetree/bindings/fpga/fpga-region.yaml b/Documentation/devicetree/bindings/fpga/fpga-region.yaml
index 4c61461d6247..55acf0ecfa3f 100644
--- a/Documentation/devicetree/bindings/fpga/fpga-region.yaml
+++ b/Documentation/devicetree/bindings/fpga/fpga-region.yaml
@@ -210,9 +210,9 @@ description: |
   FPGA Bridges that exist on the FPGA fabric prior to the partial reconfiguration.
 
   --
-  [1] www.altera.com/content/dam/altera-www/global/en_US/pdfs/literature/ug/ug_partrecon.pdf
+  [1] https://www.intel.com/programmable/technical-pdfs/683404.pdf
   [2] tspace.library.utoronto.ca/bitstream/1807/67932/1/Byma_Stuart_A_201411_MAS_thesis.pdf
-  [3] https://www.xilinx.com/support/documentation/sw_manuals/xilinx14_1/ug702.pdf
+  [3] https://docs.amd.com/v/u/en-US/ug702
 
 properties:
   $nodename:
diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml
index a23a626bfab6..61d7ba89adc2 100644
--- a/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml
+++ b/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml
@@ -35,15 +35,17 @@ properties:
   spi-3wire: true
 
   interrupts:
-    maxItems: 1
+    minItems: 1
+    maxItems: 2
 
   interrupt-names:
+    minItems: 1
     items:
       - enum: [INT1, INT2]
+      - const: INT2
 
 dependencies:
   interrupts: [ interrupt-names ]
-  interrupt-names: [ interrupts ]
 
 required:
   - compatible
@@ -84,7 +86,8 @@ examples:
             spi-cpol;
             spi-cpha;
             interrupt-parent = <&gpio0>;
-            interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
-            interrupt-names = "INT2";
+            interrupts = <0 IRQ_TYPE_LEVEL_HIGH>,
+                         <1 IRQ_TYPE_LEVEL_HIGH>;
+            interrupt-names = "INT1", "INT2";
         };
     };
diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adxl380.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adxl380.yaml
index f1ff5ff4f478..ab517720a6a7 100644
--- a/Documentation/devicetree/bindings/iio/accel/adi,adxl380.yaml
+++ b/Documentation/devicetree/bindings/iio/accel/adi,adxl380.yaml
@@ -11,16 +11,19 @@ maintainers:
   - Antoniu Miclaus <antoniu.miclaus@analog.com>
 
 description: |
-  The ADXL380/ADXL382 is a low noise density, low power, 3-axis
-  accelerometer with selectable measurement ranges. The ADXL380
-  supports the ±4 g, ±8 g, and ±16 g ranges, and the ADXL382 supports
-  ±15 g, ±30 g, and ±60 g ranges.
+  The ADXL380/ADXL382 and ADXL318/ADXL319 are low noise density,
+  low power, 3-axis accelerometers with selectable measurement ranges.
+  The ADXL380 and ADXL318 support the ±4 g, ±8 g, and ±16 g ranges,
+  while the ADXL382 and ADXL319 support ±15 g, ±30 g, and ±60 g ranges.
 
+  https://www.analog.com/en/products/adxl318.html
   https://www.analog.com/en/products/adxl380.html
 
 properties:
   compatible:
     enum:
+      - adi,adxl318
+      - adi,adxl319
       - adi,adxl380
       - adi,adxl382
 
diff --git a/Documentation/devicetree/bindings/iio/accel/bosch,bma220.yaml b/Documentation/devicetree/bindings/iio/accel/bosch,bma220.yaml
index ec643de031a3..8c820c27f781 100644
--- a/Documentation/devicetree/bindings/iio/accel/bosch,bma220.yaml
+++ b/Documentation/devicetree/bindings/iio/accel/bosch,bma220.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/iio/accel/bosch,bma220.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Bosch BMA220 Trixial Acceleration Sensor
+title: Bosch BMA220 Triaxial Acceleration Sensor
 
 maintainers:
   - Jonathan Cameron <Jonathan.Cameron@huawei.com>
@@ -20,6 +20,9 @@ properties:
   interrupts:
     maxItems: 1
 
+  spi-cpha: true
+  spi-cpol: true
+
   vdda-supply: true
   vddd-supply: true
   vddio-supply: true
@@ -44,8 +47,10 @@ examples:
             compatible = "bosch,bma220";
             reg = <0>;
             spi-max-frequency = <2500000>;
+            spi-cpol;
+            spi-cpha;
             interrupt-parent = <&gpio0>;
-            interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+            interrupts = <0 IRQ_TYPE_EDGE_RISING>;
         };
     };
 ...
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad4080.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad4080.yaml
index ed849ba1b77b..ccd6a0ac1539 100644
--- a/Documentation/devicetree/bindings/iio/adc/adi,ad4080.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad4080.yaml
@@ -26,6 +26,11 @@ properties:
   compatible:
     enum:
       - adi,ad4080
+      - adi,ad4081
+      - adi,ad4083
+      - adi,ad4084
+      - adi,ad4086
+      - adi,ad4087
 
   reg:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,max14001.yaml b/Documentation/devicetree/bindings/iio/adc/adi,max14001.yaml
new file mode 100644
index 000000000000..a2dc59c9dcd8
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/adi,max14001.yaml
@@ -0,0 +1,89 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2023-2025 Analog Devices Inc.
+# Copyright 2023 Kim Seer Paller
+# Copyright 2025 Marilene Andrade Garcia
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/adi,max14001.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices MAX14001-MAX14002 ADC
+
+maintainers:
+  - Kim Seer Paller <kimseer.paller@analog.com>
+  - Marilene Andrade Garcia <marilene.agarcia@gmail.com>
+
+description: |
+    Single channel 10 bit ADC with SPI interface.
+    Datasheet can be found here
+      https://www.analog.com/media/en/technical-documentation/data-sheets/MAX14001-MAX14002.pdf
+
+$ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - const: adi,max14002
+      - items:
+          - const: adi,max14001
+          - const: adi,max14002
+
+  reg:
+    maxItems: 1
+
+  spi-max-frequency:
+    maximum: 5000000
+
+  vdd-supply:
+    description:
+      Isolated DC-DC power supply input voltage.
+
+  vddl-supply:
+    description:
+      Logic power supply.
+
+  refin-supply:
+    description:
+      ADC voltage reference supply.
+
+  interrupts:
+    minItems: 1
+    items:
+      - description: |
+          cout: comparator output signal that asserts high on the COUT pin
+          when ADC readings exceed the upper threshold and low when readings
+          fall below the lower threshold.
+      - description: |
+          fault: when fault reporting is enabled, the FAULT pin is asserted
+          low whenever one of the monitored fault conditions occurs.
+
+  interrupt-names:
+    minItems: 1
+    items:
+      - const: cout
+      - const: fault
+
+required:
+  - compatible
+  - reg
+  - vdd-supply
+  - vddl-supply
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      adc@0 {
+        compatible = "adi,max14001", "adi,max14002";
+        reg = <0>;
+        spi-max-frequency = <5000000>;
+        spi-lsb-first;
+        vdd-supply = <&vdd>;
+        vddl-supply = <&vddl>;
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/adc/aspeed,ast2600-adc.yaml b/Documentation/devicetree/bindings/iio/adc/aspeed,ast2600-adc.yaml
index 5c08d8b6e995..509bfb1007c4 100644
--- a/Documentation/devicetree/bindings/iio/adc/aspeed,ast2600-adc.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/aspeed,ast2600-adc.yaml
@@ -29,6 +29,8 @@ properties:
     enum:
       - aspeed,ast2600-adc0
       - aspeed,ast2600-adc1
+      - aspeed,ast2700-adc0
+      - aspeed,ast2700-adc1
     description:
       Their trimming data, which is used to calibrate internal reference volage,
       locates in different address of OTP.
diff --git a/Documentation/devicetree/bindings/iio/adc/mediatek,mt2701-auxadc.yaml b/Documentation/devicetree/bindings/iio/adc/mediatek,mt2701-auxadc.yaml
index 14363389f30a..d9e825e5054f 100644
--- a/Documentation/devicetree/bindings/iio/adc/mediatek,mt2701-auxadc.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/mediatek,mt2701-auxadc.yaml
@@ -42,6 +42,7 @@ properties:
               - mediatek,mt8183-auxadc
               - mediatek,mt8186-auxadc
               - mediatek,mt8188-auxadc
+              - mediatek,mt8189-auxadc
               - mediatek,mt8195-auxadc
               - mediatek,mt8516-auxadc
           - const: mediatek,mt8173-auxadc
diff --git a/Documentation/devicetree/bindings/iio/adc/renesas,r9a09g077-adc.yaml b/Documentation/devicetree/bindings/iio/adc/renesas,r9a09g077-adc.yaml
new file mode 100644
index 000000000000..dc0206b28231
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/renesas,r9a09g077-adc.yaml
@@ -0,0 +1,135 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/renesas,r9a09g077-adc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas RZ/T2H / RZ/N2H ADC12
+
+maintainers:
+  - Cosmin Tanislav <cosmin-gabriel.tanislav.xa@renesas.com>
+
+description: |
+  A/D Converter block is a successive approximation analog-to-digital converter
+  with a 12-bit accuracy. Up to 16 analog input channels can be selected.
+  Conversions can be performed in single or continuous mode. Result of the ADC
+  is stored in a 16-bit data register corresponding to each channel.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - const: renesas,r9a09g087-adc # RZ/N2H
+          - const: renesas,r9a09g077-adc # RZ/T2H
+      - items:
+          - const: renesas,r9a09g077-adc # RZ/T2H
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    items:
+      - description: A/D scan end interrupt
+      - description: A/D scan end interrupt for Group B
+      - description: A/D scan end interrupt for Group C
+      - description: Window A compare match
+      - description: Window B compare match
+      - description: Compare match
+      - description: Compare mismatch
+
+  interrupt-names:
+    items:
+      - const: adi
+      - const: gbadi
+      - const: gcadi
+      - const: cmpai
+      - const: cmpbi
+      - const: wcmpm
+      - const: wcmpum
+
+  clocks:
+    items:
+      - description: Converter clock
+      - description: Peripheral clock
+
+  clock-names:
+    items:
+      - const: adclk
+      - const: pclk
+
+  power-domains:
+    maxItems: 1
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+  "#io-channel-cells":
+    const: 1
+
+patternProperties:
+  "^channel@[0-9a-f]$":
+    $ref: adc.yaml
+    type: object
+    description: The external channels which are connected to the ADC.
+
+    properties:
+      reg:
+        description: The channel number.
+        maximum: 15
+
+    required:
+      - reg
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - power-domains
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/renesas,r9a09g077-cpg-mssr.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    adc@80008000 {
+      compatible = "renesas,r9a09g077-adc";
+      reg = <0x80008000 0x400>;
+      interrupts = <GIC_SPI 708 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 709 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 710 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 711 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 712 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 855 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 856 IRQ_TYPE_EDGE_RISING>;
+      interrupt-names = "adi", "gbadi", "gcadi",
+                        "cmpai", "cmpbi", "wcmpm", "wcmpum";
+      clocks = <&cpg CPG_CORE R9A09G077_CLK_PCLKL>,
+               <&cpg CPG_MOD 225>;
+      clock-names = "adclk", "pclk";
+      power-domains = <&cpg>;
+      #address-cells = <1>;
+      #size-cells = <0>;
+      #io-channel-cells = <1>;
+
+      channel@0 {
+        reg = <0x0>;
+      };
+      channel@1 {
+        reg = <0x1>;
+      };
+      channel@2 {
+        reg = <0x2>;
+      };
+      channel@3 {
+        reg = <0x3>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/iio/adc/renesas,rzn1-adc.yaml b/Documentation/devicetree/bindings/iio/adc/renesas,rzn1-adc.yaml
new file mode 100644
index 000000000000..1a40352165fb
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/renesas,rzn1-adc.yaml
@@ -0,0 +1,111 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/renesas,rzn1-adc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas RZ/N1 Analog to Digital Converter (ADC)
+
+maintainers:
+  - Herve Codina <herve.codina@bootlin.com>
+
+description:
+  The Renesas RZ/N1 ADC controller available in the Renesas RZ/N1 SoCs family
+  can use up to two internal ADC cores (ADC1 and ADC2) those internal cores are
+  handled through ADC controller virtual channels.
+
+properties:
+  compatible:
+    items:
+      - const: renesas,r9a06g032-adc   # RZ/N1D
+      - const: renesas,rzn1-adc
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: APB internal bus clock
+      - description: ADC clock
+
+  clock-names:
+    items:
+      - const: pclk
+      - const: adc
+
+  power-domains:
+    maxItems: 1
+
+  adc1-avdd-supply:
+    description:
+      ADC1 analog power supply.
+
+  adc1-vref-supply:
+    description:
+      ADC1 reference voltage supply.
+
+  adc2-avdd-supply:
+    description:
+      ADC2 analog power supply.
+
+  adc2-vref-supply:
+    description:
+      ADC2 reference voltage supply.
+
+  '#io-channel-cells':
+    const: 1
+    description: |
+      Channels numbers available:
+        if ADC1 is used (i.e. adc1-{avdd,vref}-supply present):
+          - 0: ADC1 IN0
+          - 1: ADC1 IN1
+          - 2: ADC1 IN2
+          - 3: ADC1 IN3
+          - 4: ADC1 IN4
+          - 5: ADC1 IN6
+          - 6: ADC1 IN7
+          - 7: ADC1 IN8
+        if ADC2 is used (i.e. adc2-{avdd,vref}-supply present):
+          - 8: ADC2 IN0
+          - 9: ADC2 IN1
+          - 10: ADC2 IN2
+          - 11: ADC2 IN3
+          - 12: ADC2 IN4
+          - 13: ADC2 IN6
+          - 14: ADC2 IN7
+          - 15: ADC2 IN8
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - power-domains
+  - '#io-channel-cells'
+
+# At least one of avvd/vref supplies
+anyOf:
+  - required:
+      - adc1-vref-supply
+      - adc1-avdd-supply
+  - required:
+      - adc2-vref-supply
+      - adc2-avdd-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r9a06g032-sysctrl.h>
+
+    adc: adc@40065000 {
+      compatible = "renesas,r9a06g032-adc", "renesas,rzn1-adc";
+      reg = <0x40065000 0x200>;
+      clocks = <&sysctrl R9A06G032_HCLK_ADC>, <&sysctrl R9A06G032_CLK_ADC>;
+      clock-names = "pclk", "adc";
+      power-domains = <&sysctrl>;
+      adc1-avdd-supply = <&adc1_avdd>;
+      adc1-vref-supply = <&adc1_vref>;
+      #io-channel-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/adc/rockchip-saradc.yaml b/Documentation/devicetree/bindings/iio/adc/rockchip-saradc.yaml
index f776041fd08f..6769d679c907 100644
--- a/Documentation/devicetree/bindings/iio/adc/rockchip-saradc.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/rockchip-saradc.yaml
@@ -16,6 +16,9 @@ properties:
       - const: rockchip,rk3066-tsadc
       - const: rockchip,rk3399-saradc
       - const: rockchip,rk3528-saradc
+      - items:
+          - const: rockchip,rk3506-saradc
+          - const: rockchip,rk3528-saradc
       - const: rockchip,rk3562-saradc
       - const: rockchip,rk3588-saradc
       - items:
diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5446.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5446.yaml
new file mode 100644
index 000000000000..2669d2c4948b
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5446.yaml
@@ -0,0 +1,138 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/dac/adi,ad5446.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD5446 and similar DACs
+
+maintainers:
+  - Michael Hennerich <michael.hennerich@analog.com>
+  - Nuno Sá <nuno.sa@analog.com>
+
+description:
+  Digital to Analog Converter devices supporting both SPI and I2C interfaces.
+  These devices feature a range of resolutions from 8-bit to 16-bit.
+
+properties:
+  compatible:
+    oneOf:
+      - description: SPI DACs
+        enum:
+          - adi,ad5300
+          - adi,ad5310
+          - adi,ad5320
+          - adi,ad5444
+          - adi,ad5446
+          - adi,ad5450
+          - adi,ad5451
+          - adi,ad5452
+          - adi,ad5453
+          - adi,ad5512a
+          - adi,ad5541a
+          - adi,ad5542
+          - adi,ad5542a
+          - adi,ad5543
+          - adi,ad5553
+          - adi,ad5600
+          - adi,ad5601
+          - adi,ad5611
+          - adi,ad5621
+          - adi,ad5641
+          - adi,ad5620-2500
+          - adi,ad5620-1250
+          - adi,ad5640-2500
+          - adi,ad5640-1250
+          - adi,ad5660-2500
+          - adi,ad5660-1250
+          - adi,ad5662
+          - ti,dac081s101
+          - ti,dac101s101
+          - ti,dac121s101
+      - description: I2C DACs
+        enum:
+          - adi,ad5301
+          - adi,ad5311
+          - adi,ad5321
+          - adi,ad5602
+          - adi,ad5612
+          - adi,ad5622
+
+  reg:
+    maxItems: 1
+
+  vcc-supply:
+    description:
+      Reference voltage supply. If not supplied, devices with internal
+      voltage reference will use that.
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - adi,ad5300
+              - adi,ad5310
+              - adi,ad5320
+              - adi,ad5444
+              - adi,ad5446
+              - adi,ad5450
+              - adi,ad5451
+              - adi,ad5452
+              - adi,ad5453
+              - adi,ad5512a
+              - adi,ad5541a
+              - adi,ad5542
+              - adi,ad5542a
+              - adi,ad5543
+              - adi,ad5553
+              - adi,ad5600
+              - adi,ad5601
+              - adi,ad5611
+              - adi,ad5621
+              - adi,ad5641
+              - adi,ad5620-2500
+              - adi,ad5620-1250
+              - adi,ad5640-2500
+              - adi,ad5640-1250
+              - adi,ad5660-2500
+              - adi,ad5660-1250
+              - adi,ad5662
+              - ti,dac081s101
+              - ti,dac101s101
+              - ti,dac121s101
+    then:
+      allOf:
+        - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        dac@0 {
+            compatible = "adi,ad5446";
+            reg = <0>;
+            vcc-supply = <&dac_vref>;
+        };
+    };
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        dac@42 {
+            compatible = "adi,ad5622";
+            reg = <0x42>;
+            vcc-supply = <&dac_vref>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/health/maxim,max30100.yaml b/Documentation/devicetree/bindings/iio/health/maxim,max30100.yaml
index 967778fb0ce8..d4753c85ecc3 100644
--- a/Documentation/devicetree/bindings/iio/health/maxim,max30100.yaml
+++ b/Documentation/devicetree/bindings/iio/health/maxim,max30100.yaml
@@ -27,6 +27,14 @@ properties:
       LED current whilst the engine is running. First indexed value is
       the configuration for the RED LED, and second value is for the IR LED.
 
+  maxim,pulse-width-us:
+    description: |
+      LED pulse width in microseconds. Appropriate pulse width depends on
+      factors such as optical window absorption, LED-to-sensor distance,
+      and expected reflectivity of the skin or contact surface.
+    enum: [200, 400, 800, 1600]
+    default: 1600
+
 additionalProperties: false
 
 required:
diff --git a/Documentation/devicetree/bindings/iio/imu/bosch,smi330.yaml b/Documentation/devicetree/bindings/iio/imu/bosch,smi330.yaml
new file mode 100644
index 000000000000..0270ca456d2b
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/imu/bosch,smi330.yaml
@@ -0,0 +1,90 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/imu/bosch,smi330.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Bosch SMI330 6-Axis IMU
+
+maintainers:
+  - Stefan Gutmann <stefam.gutmann@de.bosch.com>
+
+description:
+  SMI330 is a 6-axis inertial measurement unit that supports acceleration and
+  gyroscopic measurements with hardware fifo buffering. Sensor also provides
+  events information such as motion, no-motion and tilt detection.
+
+properties:
+  compatible:
+    const: bosch,smi330
+
+  reg:
+    maxItems: 1
+
+  vdd-supply:
+    description: provide VDD power to the sensor.
+
+  vddio-supply:
+    description: provide VDD IO power to the sensor.
+
+  interrupts:
+    minItems: 1
+    maxItems: 2
+
+  interrupt-names:
+    minItems: 1
+    maxItems: 2
+    items:
+      enum:
+        - INT1
+        - INT2
+
+  drive-open-drain:
+    type: boolean
+    description:
+      set if the interrupt pin(s) should be configured as
+      open drain. If not set, defaults to push-pull.
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    // Example for I2C
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        imu@68 {
+            compatible = "bosch,smi330";
+            reg = <0x68>;
+            vddio-supply = <&vddio>;
+            vdd-supply = <&vdd>;
+            interrupt-parent = <&gpio>;
+            interrupts = <26 IRQ_TYPE_EDGE_RISING>;
+            interrupt-names = "INT1";
+        };
+    };
+
+    // Example for SPI
+    #include <dt-bindings/interrupt-controller/irq.h>
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        imu@0 {
+            compatible = "bosch,smi330";
+            reg = <0>;
+            spi-max-frequency = <10000000>;
+            interrupt-parent = <&gpio>;
+            interrupts = <26 IRQ_TYPE_EDGE_RISING>;
+            interrupt-names = "INT1";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/iio/imu/invensense,icm45600.yaml b/Documentation/devicetree/bindings/iio/imu/invensense,icm45600.yaml
new file mode 100644
index 000000000000..e0b78d14420f
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/imu/invensense,icm45600.yaml
@@ -0,0 +1,90 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/imu/invensense,icm45600.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: InvenSense ICM-45600 Inertial Measurement Unit
+
+maintainers:
+  - Remi Buisson <remi.buisson@tdk.com>
+
+description: |
+  6-axis MotionTracking device that combines a 3-axis gyroscope and a 3-axis
+  accelerometer.
+
+  It has a configurable host interface that supports I3C, I2C and SPI serial
+  communication, features up to 8kB FIFO and 2 programmable interrupts with
+  ultra-low-power wake-on-motion support to minimize system power consumption.
+
+  Other industry-leading features include InvenSense on-chip APEX Motion
+  Processing engine for gesture recognition, activity classification, and
+  pedometer, along with programmable digital filters, and an embedded
+  temperature sensor.
+
+  https://invensense.tdk.com/wp-content/uploads/documentation/DS-000576_ICM-45605.pdf
+
+properties:
+  compatible:
+    enum:
+      - invensense,icm45605
+      - invensense,icm45606
+      - invensense,icm45608
+      - invensense,icm45634
+      - invensense,icm45686
+      - invensense,icm45687
+      - invensense,icm45688p
+      - invensense,icm45689
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 1
+    maxItems: 2
+
+  interrupt-names:
+    minItems: 1
+    items:
+      - enum: [int1, int2]
+      - const: int2
+    description: Choose chip interrupt pin to be used as interrupt input.
+
+  drive-open-drain:
+    type: boolean
+
+  vdd-supply: true
+
+  vddio-supply: true
+
+  mount-matrix: true
+
+required:
+  - compatible
+  - reg
+  - vdd-supply
+  - vddio-supply
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        imu@68 {
+            compatible = "invensense,icm45605";
+            reg = <0x68>;
+            interrupt-parent = <&gpio2>;
+            interrupt-names = "int1";
+            interrupts = <7 IRQ_TYPE_EDGE_RISING>;
+            vdd-supply = <&vdd>;
+            vddio-supply = <&vddio>;
+            mount-matrix = "0", "-1", "0",
+                           "1", "0", "0",
+                           "0", "0", "1";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/iio/imu/invensense,mpu6050.yaml b/Documentation/devicetree/bindings/iio/imu/invensense,mpu6050.yaml
index 0bce71529e34..1af0855c33e6 100644
--- a/Documentation/devicetree/bindings/iio/imu/invensense,mpu6050.yaml
+++ b/Documentation/devicetree/bindings/iio/imu/invensense,mpu6050.yaml
@@ -86,7 +86,6 @@ unevaluatedProperties: false
 required:
   - compatible
   - reg
-  - interrupts
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/iio/pressure/aosong,adp810.yaml b/Documentation/devicetree/bindings/iio/pressure/aosong,adp810.yaml
new file mode 100644
index 000000000000..ad5f26ce5043
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/pressure/aosong,adp810.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/pressure/aosong,adp810.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: aosong adp810 differential pressure sensor
+
+maintainers:
+  - Akhilesh Patil <akhilesh@ee.iitb.ac.in>
+
+description:
+  ADP810 is differential pressure and temperature sensor. It has I2C bus
+  interface with fixed address of 0x25. This sensor supports 8 bit CRC for
+  reliable data transfer. It can measure differential pressure in the
+  range -500 to 500Pa and temperate in the range -40 to +85 degree celsius.
+
+properties:
+  compatible:
+    enum:
+      - aosong,adp810
+
+  reg:
+    maxItems: 1
+
+  vdd-supply: true
+
+required:
+  - compatible
+  - reg
+  - vdd-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        pressure-sensor@25 {
+            compatible = "aosong,adp810";
+            reg = <0x25>;
+            vdd-supply = <&vdd_regulator>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/iio/pressure/fsl,mpl3115.yaml b/Documentation/devicetree/bindings/iio/pressure/fsl,mpl3115.yaml
new file mode 100644
index 000000000000..2933c2e10695
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/pressure/fsl,mpl3115.yaml
@@ -0,0 +1,71 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/pressure/fsl,mpl3115.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MPL3115 precision pressure sensor with altimetry
+
+maintainers:
+  - Antoni Pokusinski <apokusinski01@gmail.com>
+
+description: |
+  MPL3115 is a pressure/altitude and temperature sensor with I2C interface.
+  It features two programmable interrupt lines which indicate events such as
+  data ready or pressure/temperature threshold reached.
+  https://www.nxp.com/docs/en/data-sheet/MPL3115A2.pdf
+
+properties:
+  compatible:
+    const: fsl,mpl3115
+
+  reg:
+    maxItems: 1
+
+  vdd-supply: true
+
+  vddio-supply: true
+
+  interrupts:
+    minItems: 1
+    maxItems: 2
+
+  interrupt-names:
+    minItems: 1
+    maxItems: 2
+    items:
+      enum:
+        - INT1
+        - INT2
+
+  drive-open-drain:
+    type: boolean
+    description:
+      set if the specified interrupt pins should be configured as
+      open drain. If not set, defaults to push-pull.
+
+required:
+  - compatible
+  - reg
+  - vdd-supply
+  - vddio-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pressure@60 {
+            compatible = "fsl,mpl3115";
+            reg = <0x60>;
+            vdd-supply = <&vdd>;
+            vddio-supply = <&vddio>;
+            interrupt-parent = <&gpio1>;
+            interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
+            interrupt-names = "INT2";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/iio/pressure/infineon,dps310.yaml b/Documentation/devicetree/bindings/iio/pressure/infineon,dps310.yaml
new file mode 100644
index 000000000000..e5d1e6c48939
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/pressure/infineon,dps310.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/pressure/infineon,dps310.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Infineon DPS310 barometric pressure and temperature sensor
+
+maintainers:
+  - Eddie James <eajames@linux.ibm.com>
+
+description:
+  The DPS310 is a barometric pressure and temperature sensor with an I2C
+  interface.
+
+properties:
+  compatible:
+    enum:
+      - infineon,dps310
+
+  reg:
+    maxItems: 1
+
+  "#io-channel-cells":
+    const: 0
+
+  vdd-supply:
+    description:
+      Voltage supply for the chip's analog blocks.
+
+  vddio-supply:
+    description:
+      Digital voltage supply for the chip's digital blocks and I/O interface.
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        dps: pressure-sensor@76 {
+          compatible = "infineon,dps310";
+          reg = <0x76>;
+          #io-channel-cells = <0>;
+          vdd-supply = <&vref1>;
+          vddio-supply = <&vref2>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/interconnect/qcom,kaanapali-rpmh.yaml b/Documentation/devicetree/bindings/interconnect/qcom,kaanapali-rpmh.yaml
new file mode 100644
index 000000000000..2c3b2fd81a74
--- /dev/null
+++ b/Documentation/devicetree/bindings/interconnect/qcom,kaanapali-rpmh.yaml
@@ -0,0 +1,124 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interconnect/qcom,kaanapali-rpmh.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm RPMh Network-On-Chip Interconnect on Kaanapali
+
+maintainers:
+  - Raviteja Laggyshetty <raviteja.laggyshetty@oss.qualcomm.com>
+
+description: |
+  RPMh interconnect providers support system bandwidth requirements through
+  RPMh hardware accelerators known as Bus Clock Manager (BCM). The provider is
+  able to communicate with the BCM through the Resource State Coordinator (RSC)
+  associated with each execution environment. Provider nodes must point to at
+  least one RPMh device child node pertaining to their RSC and each provider
+  can map to multiple RPMh resources.
+
+  See also: include/dt-bindings/interconnect/qcom,kaanapali-rpmh.h
+
+properties:
+  compatible:
+    enum:
+      - qcom,kaanapali-aggre-noc
+      - qcom,kaanapali-clk-virt
+      - qcom,kaanapali-cnoc-main
+      - qcom,kaanapali-cnoc-cfg
+      - qcom,kaanapali-gem-noc
+      - qcom,kaanapali-lpass-ag-noc
+      - qcom,kaanapali-lpass-lpiaon-noc
+      - qcom,kaanapali-lpass-lpicx-noc
+      - qcom,kaanapali-mc-virt
+      - qcom,kaanapali-mmss-noc
+      - qcom,kaanapali-nsp-noc
+      - qcom,kaanapali-pcie-anoc
+      - qcom,kaanapali-system-noc
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 2
+    maxItems: 3
+
+required:
+  - compatible
+
+allOf:
+  - $ref: qcom,rpmh-common.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,kaanapali-clk-virt
+              - qcom,kaanapali-mc-virt
+    then:
+      properties:
+        reg: false
+    else:
+      required:
+        - reg
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,kaanapali-pcie-anoc
+    then:
+      properties:
+        clocks:
+          items:
+            - description: aggre-NOC PCIe AXI clock
+            - description: cfg-NOC PCIe a-NOC AHB clock
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,kaanapali-aggre-noc
+    then:
+      properties:
+        clocks:
+          items:
+            - description: aggre UFS PHY AXI clock
+            - description: aggre USB3 PRIM AXI clock
+            - description: RPMH CC IPA clock
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,kaanapali-aggre-noc
+              - qcom,kaanapali-pcie-anoc
+    then:
+      required:
+        - clocks
+    else:
+      properties:
+        clocks: false
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    clk_virt: interconnect-0 {
+      compatible = "qcom,kaanapali-clk-virt";
+      #interconnect-cells = <2>;
+      qcom,bcm-voters = <&apps_bcm_voter>;
+    };
+
+    aggre_noc: interconnect@16e0000 {
+      compatible = "qcom,kaanapali-aggre-noc";
+      reg = <0x016e0000 0x42400>;
+      #interconnect-cells = <2>;
+      clocks = <&gcc_aggre_ufs_phy_axi_clk>,
+               <&gcc_aggre_usb3_prim_axi_clk>,
+               <&rpmhcc_ipa_clk>;
+      qcom,bcm-voters = <&apps_bcm_voter>;
+    };
diff --git a/Documentation/devicetree/bindings/interconnect/qcom,msm8998-bwmon.yaml b/Documentation/devicetree/bindings/interconnect/qcom,msm8998-bwmon.yaml
index afa4d3539f5c..17b09292000e 100644
--- a/Documentation/devicetree/bindings/interconnect/qcom,msm8998-bwmon.yaml
+++ b/Documentation/devicetree/bindings/interconnect/qcom,msm8998-bwmon.yaml
@@ -25,6 +25,7 @@ properties:
       - const: qcom,msm8998-bwmon       # BWMON v4
       - items:
           - enum:
+              - qcom,kaanapali-cpu-bwmon
               - qcom,qcm2290-cpu-bwmon
               - qcom,qcs615-cpu-bwmon
               - qcom,qcs8300-cpu-bwmon
diff --git a/Documentation/devicetree/bindings/interconnect/qcom,sa8775p-rpmh.yaml b/Documentation/devicetree/bindings/interconnect/qcom,sa8775p-rpmh.yaml
index db19fd5c5708..71428d2cce18 100644
--- a/Documentation/devicetree/bindings/interconnect/qcom,sa8775p-rpmh.yaml
+++ b/Documentation/devicetree/bindings/interconnect/qcom,sa8775p-rpmh.yaml
@@ -33,18 +33,66 @@ properties:
       - qcom,sa8775p-pcie-anoc
       - qcom,sa8775p-system-noc
 
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 2
+    maxItems: 5
+
 required:
   - compatible
 
 allOf:
   - $ref: qcom,rpmh-common.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sa8775p-aggre1-noc
+    then:
+      properties:
+        clocks:
+          items:
+            - description: aggre UFS PHY AXI clock
+            - description: aggre QUP PRIM AXI clock
+            - description: aggre USB2 PRIM AXI clock
+            - description: aggre USB3 PRIM AXI clock
+            - description: aggre USB3 SEC AXI clock
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sa8775p-aggre2-noc
+    then:
+      properties:
+        clocks:
+          items:
+            - description: aggre UFS CARD AXI clock
+            - description: RPMH CC IPA clock
 
 unevaluatedProperties: false
 
 examples:
   - |
-    aggre1_noc: interconnect-aggre1-noc {
+    #include <dt-bindings/clock/qcom,sa8775p-gcc.h>
+    clk_virt: interconnect-clk-virt {
+        compatible = "qcom,sa8775p-clk-virt";
+        #interconnect-cells = <2>;
+        qcom,bcm-voters = <&apps_bcm_voter>;
+    };
+
+    aggre1_noc: interconnect@16c0000 {
         compatible = "qcom,sa8775p-aggre1-noc";
+        reg = <0x016c0000 0x18080>;
         #interconnect-cells = <2>;
         qcom,bcm-voters = <&apps_bcm_voter>;
+        clocks = <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
+                 <&gcc GCC_AGGRE_NOC_QUPV3_AXI_CLK>,
+                 <&gcc GCC_AGGRE_USB2_PRIM_AXI_CLK>,
+                 <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>,
+                 <&gcc GCC_AGGRE_USB3_SEC_AXI_CLK>;
     };
diff --git a/Documentation/devicetree/bindings/interconnect/qcom,sm6350-rpmh.yaml b/Documentation/devicetree/bindings/interconnect/qcom,sm6350-rpmh.yaml
index 49eb156b08e0..2dc16e4293a9 100644
--- a/Documentation/devicetree/bindings/interconnect/qcom,sm6350-rpmh.yaml
+++ b/Documentation/devicetree/bindings/interconnect/qcom,sm6350-rpmh.yaml
@@ -12,9 +12,6 @@ maintainers:
 description:
   Qualcomm RPMh-based interconnect provider on SM6350.
 
-allOf:
-  - $ref: qcom,rpmh-common.yaml#
-
 properties:
   compatible:
     enum:
@@ -30,7 +27,9 @@ properties:
   reg:
     maxItems: 1
 
-  '#interconnect-cells': true
+  clocks:
+    minItems: 1
+    maxItems: 2
 
 patternProperties:
   '^interconnect-[a-z0-9\-]+$':
@@ -46,8 +45,6 @@ patternProperties:
           - qcom,sm6350-clk-virt
           - qcom,sm6350-compute-noc
 
-      '#interconnect-cells': true
-
     required:
       - compatible
 
@@ -57,10 +54,54 @@ required:
   - compatible
   - reg
 
+allOf:
+  - $ref: qcom,rpmh-common.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sm6350-aggre1-noc
+    then:
+      properties:
+        clocks:
+          items:
+            - description: aggre UFS PHY AXI clock
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sm6350-aggre2-noc
+    then:
+      properties:
+        clocks:
+          items:
+            - description: aggre USB3 PRIM AXI clock
+            - description: RPMH CC IPA clock
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sm6350-aggre1-noc
+              - qcom,sm6350-aggre2-noc
+    then:
+      required:
+        - clocks
+    else:
+      properties:
+        clocks: false
+
 unevaluatedProperties: false
 
 examples:
   - |
+    #include <dt-bindings/clock/qcom,gcc-sm6350.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
+
     config_noc: interconnect@1500000 {
         compatible = "qcom,sm6350-config-noc";
         reg = <0x01500000 0x28000>;
@@ -68,14 +109,16 @@ examples:
         qcom,bcm-voters = <&apps_bcm_voter>;
     };
 
-    system_noc: interconnect@1620000 {
-        compatible = "qcom,sm6350-system-noc";
-        reg = <0x01620000 0x17080>;
+    aggre2_noc: interconnect@1700000 {
+        compatible = "qcom,sm6350-aggre2-noc";
+        reg = <0x01700000 0x1f880>;
         #interconnect-cells = <2>;
         qcom,bcm-voters = <&apps_bcm_voter>;
+        clocks = <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>,
+                 <&rpmhcc RPMH_IPA_CLK>;
 
-        clk_virt: interconnect-clk-virt {
-            compatible = "qcom,sm6350-clk-virt";
+        compute_noc: interconnect-compute-noc {
+            compatible = "qcom,sm6350-compute-noc";
             #interconnect-cells = <2>;
             qcom,bcm-voters = <&apps_bcm_voter>;
         };
diff --git a/Documentation/devicetree/bindings/nvmem/imx-ocotp.yaml b/Documentation/devicetree/bindings/nvmem/imx-ocotp.yaml
index b2cb76cf9053..a8076d0e2737 100644
--- a/Documentation/devicetree/bindings/nvmem/imx-ocotp.yaml
+++ b/Documentation/devicetree/bindings/nvmem/imx-ocotp.yaml
@@ -14,7 +14,8 @@ maintainers:
 description: |
   This binding represents the on-chip eFuse OTP controller found on
   i.MX6Q/D, i.MX6DL/S, i.MX6SL, i.MX6SX, i.MX6UL, i.MX6ULL/ULZ, i.MX6SLL,
-  i.MX7D/S, i.MX7ULP, i.MX8MQ, i.MX8MM, i.MX8MN i.MX8MP and i.MX93/5 SoCs.
+  i.MX7D/S, i.MX7ULP, i.MX8MQ, i.MX8MM, i.MX8MN i.MX8MP, i.MX93, i.MX94,
+  and i.MX95.
 
 allOf:
   - $ref: nvmem.yaml#
@@ -36,6 +37,7 @@ properties:
               - fsl,imx8mq-ocotp
               - fsl,imx8mm-ocotp
               - fsl,imx93-ocotp
+              - fsl,imx94-ocotp
               - fsl,imx95-ocotp
           - const: syscon
       - items:
diff --git a/Documentation/devicetree/bindings/nvmem/layouts/u-boot,env.yaml b/Documentation/devicetree/bindings/nvmem/layouts/u-boot,env.yaml
index 56a8f55d4a09..e9e75c38bd11 100644
--- a/Documentation/devicetree/bindings/nvmem/layouts/u-boot,env.yaml
+++ b/Documentation/devicetree/bindings/nvmem/layouts/u-boot,env.yaml
@@ -46,6 +46,12 @@ properties:
     type: object
     description: Command to use for automatic booting
 
+  env-size:
+    description:
+      Size in bytes of the environment data used by U-Boot for CRC
+      calculation. If omitted, the full NVMEM region size is used.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
   ethaddr:
     type: object
     description: Ethernet interfaces base MAC address.
@@ -104,6 +110,7 @@ examples:
 
             partition-u-boot-env {
                 compatible = "brcm,env";
+                env-size = <0x20000>;
 
                 ethaddr {
                 };
diff --git a/Documentation/devicetree/bindings/nvmem/mediatek,efuse.yaml b/Documentation/devicetree/bindings/nvmem/mediatek,efuse.yaml
index 4dc0d42df3e6..c9bf34ee0efb 100644
--- a/Documentation/devicetree/bindings/nvmem/mediatek,efuse.yaml
+++ b/Documentation/devicetree/bindings/nvmem/mediatek,efuse.yaml
@@ -25,7 +25,9 @@ properties:
   compatible:
     oneOf:
       - items:
-          - const: mediatek,mt8188-efuse
+          - enum:
+              - mediatek,mt8188-efuse
+              - mediatek,mt8189-efuse
           - const: mediatek,mt8186-efuse
       - const: mediatek,mt8186-efuse
 
@@ -48,6 +50,7 @@ properties:
               - mediatek,mt7988-efuse
               - mediatek,mt8173-efuse
               - mediatek,mt8183-efuse
+              - mediatek,mt8189-efuse
               - mediatek,mt8192-efuse
               - mediatek,mt8195-efuse
               - mediatek,mt8516-efuse
diff --git a/Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml b/Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml
index 3f6dc6a3a9f1..7d1612acca48 100644
--- a/Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml
+++ b/Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml
@@ -39,6 +39,7 @@ properties:
           - qcom,qcs404-qfprom
           - qcom,qcs615-qfprom
           - qcom,qcs8300-qfprom
+          - qcom,sa8775p-qfprom
           - qcom,sar2130p-qfprom
           - qcom,sc7180-qfprom
           - qcom,sc7280-qfprom
diff --git a/Documentation/devicetree/bindings/nvmem/st,stm32-romem.yaml b/Documentation/devicetree/bindings/nvmem/st,stm32-romem.yaml
index 3b2aa605a551..ab4cdc4e3614 100644
--- a/Documentation/devicetree/bindings/nvmem/st,stm32-romem.yaml
+++ b/Documentation/devicetree/bindings/nvmem/st,stm32-romem.yaml
@@ -31,7 +31,7 @@ properties:
     maxItems: 1
 
 patternProperties:
-  "^.*@[0-9a-f]+$":
+  "@[0-9a-f]+$":
     type: object
     $ref: layouts/fixed-cell.yaml
     unevaluatedProperties: false
diff --git a/Documentation/devicetree/bindings/slimbus/slimbus.yaml b/Documentation/devicetree/bindings/slimbus/slimbus.yaml
index 89017d9cda10..5a941610ce4e 100644
--- a/Documentation/devicetree/bindings/slimbus/slimbus.yaml
+++ b/Documentation/devicetree/bindings/slimbus/slimbus.yaml
@@ -75,16 +75,22 @@ examples:
         #size-cells = <1>;
         ranges;
 
-        slim@28080000 {
+        controller@28080000 {
             compatible = "qcom,slim-ngd-v1.5.0";
             reg = <0x091c0000 0x2c000>;
             interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>;
-            #address-cells = <2>;
+            dmas = <&slimbam 3>, <&slimbam 4>;
+            dma-names = "rx", "tx";
+            #address-cells = <1>;
             #size-cells = <0>;
-
-            audio-codec@1,0 {
+            slim@1 {
+              reg = <1>;
+              #address-cells = <2>;
+              #size-cells = <0>;
+              codec@1,0 {
                 compatible = "slim217,1a0";
                 reg = <1 0>;
+              };
             };
+          };
         };
-    };
diff --git a/Documentation/devicetree/bindings/trivial-devices.yaml b/Documentation/devicetree/bindings/trivial-devices.yaml
index 057b32048f53..d0f7dbf15d6f 100644
--- a/Documentation/devicetree/bindings/trivial-devices.yaml
+++ b/Documentation/devicetree/bindings/trivial-devices.yaml
@@ -121,8 +121,6 @@ properties:
           - fsl,mma7660
             # MMA8450Q: Xtrinsic Low-power, 3-axis Xtrinsic Accelerometer
           - fsl,mma8450
-            # MPL3115: Absolute Digital Pressure Sensor
-          - fsl,mpl3115
             # MPR121: Proximity Capacitive Touch Sensor Controller
           - fsl,mpr121
             # Honeywell Humidicon HIH-6130 humidity/temperature sensor
@@ -135,8 +133,6 @@ properties:
           - ibm,cffps2
             # IBM On-Chip Controller hwmon device
           - ibm,p8-occ-hwmon
-            # Infineon barometric pressure and temperature sensor
-          - infineon,dps310
             # Infineon IR36021 digital POL buck controller
           - infineon,ir36021
             # Infineon IRPS5401 Voltage Regulator (PMIC)