Merge tag 'rproc-v7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux

Pull remoteproc updates from Bjorn Andersson:

 - Add i.MX94 support to the i.MX remoteproc driver, covering the
   Cortex-M7 and Cortex-M33 Sync cores. This also fixes programming of
   non-zero System Manager CPU/LMM reset vectors.

 - Move the remoteproc resource table definitions to a separate header,
   so they can be used by clients that do not otherwise depend on
   remoteproc. Switch the firmware resource handling over to the common
   iterator.

 - Update the Xilinx R5F remoteproc driver to check the remote core
   state before attaching, drop a binding header dependency, and add
   firmware-name based auto boot support.

 - Add Qualcomm Hawi ADSP/CDSP bindings, together with Shikra RPM
   bindings and CDSP, LPAICP, and MPSS PAS support. Fix a Qualcomm
   minidump leak, clean up PAS and WCSS reset handling, and make the
   user-visible Qualcomm naming consistent.

 - Remove a duplicate STM32_RPROC Kconfig dependency and make i.MX
   remoteproc instances use the device node name so multiple processors
   can be distinguished in sysfs.

* tag 'rproc-v7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux:
  remoteproc: qcom: pas: Drop start/stop completion from struct qcom_pas
  remoteproc: qcom: pas: Add Shikra remoteproc support
  dt-bindings: remoteproc: qcom,shikra-pas: Document Shikra PAS remoteprocs
  dt-bindings: remoteproc: Add Shikra RPM processor compatible
  remoteproc: qcom: Unify user-visible "Qualcomm" name
  remoteproc: qcom: Fix leak when custom dump_segments addition fails
  remoteproc: qcom_q6v5_wcss: drop redundant wcss_q6_bcr_reset
  dt-bindings: remoteproc: qcom,sm8550-pas: Add Hawi CDSP compatible
  dt-bindings: remoteproc: qcom,sm8550-pas: Add Hawi ADSP compatible
  remoteproc: xlnx: Enable auto boot feature
  dt-bindings: remoteproc: xlnx: Add firmware-name property
  remoteproc: xlnx: Remove binding header dependency
  remoteproc: imx_rproc: Use device node name as processor name
  remoteproc: use rsc_table_for_each_entry() in rproc_handle_resources()
  remoteproc: Move resource table data structure to its own header
  remoteproc: xlnx: Check remote core state
  remoteproc: imx_rproc: Add support for i.MX94
  remoteproc: imx_rproc: Program non-zero SM CPU/LMM reset vector
  dt-bindings: remoteproc: imx-rproc: Support i.MX94
  remoteproc: Dead code cleanup in Kconfig for STM32_RPROC

5 files changed, 179 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/remoteproc/fsl,imx-rproc.yaml b/Documentation/devicetree/bindings/remoteproc/fsl,imx-rproc.yaml
index ce8ec0119469..c18f71b64889 100644
--- a/Documentation/devicetree/bindings/remoteproc/fsl,imx-rproc.yaml
+++ b/Documentation/devicetree/bindings/remoteproc/fsl,imx-rproc.yaml
@@ -28,6 +28,9 @@ properties:
       - fsl,imx8qxp-cm4
       - fsl,imx8ulp-cm33
       - fsl,imx93-cm33
+      - fsl,imx94-cm33s
+      - fsl,imx94-cm70
+      - fsl,imx94-cm71
       - fsl,imx95-cm7
 
   clocks:
diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,rpm-proc.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,rpm-proc.yaml
index 540bdfca53d9..823304afaa98 100644
--- a/Documentation/devicetree/bindings/remoteproc/qcom,rpm-proc.yaml
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,rpm-proc.yaml
@@ -87,6 +87,7 @@ properties:
           - qcom,qcm2290-rpm-proc
           - qcom,qcs404-rpm-proc
           - qcom,sdm660-rpm-proc
+          - qcom,shikra-rpm-proc
           - qcom,sm6115-rpm-proc
           - qcom,sm6125-rpm-proc
           - qcom,sm6375-rpm-proc
diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,shikra-pas.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,shikra-pas.yaml
new file mode 100644
index 000000000000..253b14eb2b59
--- /dev/null
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,shikra-pas.yaml
@@ -0,0 +1,167 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/remoteproc/qcom,shikra-pas.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Shikra SoC Peripheral Authentication Service
+
+maintainers:
+  - Bibek Kumar Patro <bibek.patro@oss.qualcomm.com>
+  - Komal Bajaj <komal.bajaj@oss.qualcomm.com>
+
+description:
+  Qualcomm Shikra SoC Peripheral Authentication Service loads and boots
+  firmware on the Qualcomm DSP Hexagon cores.
+
+properties:
+  compatible:
+    enum:
+      - qcom,shikra-cdsp-pas
+      - qcom,shikra-lpaicp-pas
+      - qcom,shikra-mpss-pas
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: XO clock
+
+  clock-names:
+    items:
+      - const: xo
+
+  memory-region:
+    minItems: 1
+    maxItems: 2
+
+  smd-edge: false
+
+  firmware-name:
+    minItems: 1
+    items:
+      - description: Firmware name of the Hexagon core
+      - description: Firmware name of the Hexagon Devicetree
+
+  glink-edge:
+    $ref: /schemas/remoteproc/qcom,glink-edge.yaml#
+    description:
+      Qualcomm G-Link subnode which represents communication edge, channels
+      and devices related to the remoteproc core.
+    unevaluatedProperties: false
+
+  qcom,smem-states:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description: States used by the AP to signal the Hexagon core
+    items:
+      - description: Stop the remote processor
+        items:
+          - description: Phandle to the Shared Memory Point 2 Point device
+              handling the communication with a remote processor
+          - description: Single bit index to toggle in the value sent to
+              the remote processor
+            maximum: 32
+
+  qcom,smem-state-names:
+    description: The names of the state bits used for SMP2P output
+    items:
+      - const: stop
+
+required:
+  - compatible
+  - reg
+  - memory-region
+
+allOf:
+  - $ref: /schemas/remoteproc/qcom,pas-common.yaml#
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - qcom,shikra-cdsp-pas
+            - qcom,shikra-mpss-pas
+    then:
+      properties:
+        interrupts:
+          minItems: 6
+        interrupt-names:
+          minItems: 6
+        memory-region:
+          maxItems: 1
+        firmware-name:
+          maxItems: 1
+        power-domains:
+          items:
+            - description: CX power domain
+        power-domain-names:
+          items:
+            - const: cx
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - qcom,shikra-lpaicp-pas
+    then:
+      properties:
+        interrupts:
+          maxItems: 5
+        interrupt-names:
+          maxItems: 5
+        memory-region:
+          minItems: 2
+        firmware-name:
+          minItems: 2
+        power-domains: false
+        power-domain-names: false
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmcc.h>
+    #include <dt-bindings/interconnect/qcom,icc.h>
+    #include <dt-bindings/interconnect/qcom,rpm-icc.h>
+    #include <dt-bindings/interconnect/qcom,shikra.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+
+    remoteproc@b300000 {
+        compatible = "qcom,shikra-cdsp-pas";
+        reg = <0x0b300000 0x100000>;
+
+        interrupts-extended = <&intc GIC_SPI 265 IRQ_TYPE_EDGE_RISING>,
+                              <&cdsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+                              <&cdsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+                              <&cdsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+                              <&cdsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>,
+                              <&cdsp_smp2p_in 7 IRQ_TYPE_EDGE_RISING>;
+        interrupt-names = "wdog", "fatal", "ready",
+                          "handover", "stop-ack", "shutdown-ack";
+
+        clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>;
+        clock-names = "xo";
+
+        interconnects = <&mem_noc MASTER_AMPSS_M0 RPM_ALWAYS_TAG
+                         &mc_virt SLAVE_EBI_CH0 RPM_ALWAYS_TAG>;
+
+        power-domains = <&rpmpd RPMHPD_CX>;
+        power-domain-names = "cx";
+
+        memory-region = <&cdsp_mem>;
+
+        qcom,smem-states = <&cdsp_smp2p_out 0>;
+        qcom,smem-state-names = "stop";
+
+        firmware-name = "qcom/shikra/cdsp.mbn";
+
+        glink-edge {
+            interrupts = <GIC_SPI 261 IRQ_TYPE_EDGE_RISING>;
+            mboxes = <&apcs_glb 4>;
+            qcom,remote-pid = <5>;
+            label = "cdsp";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,sm8550-pas.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,sm8550-pas.yaml
index 1e4db0c9fcf9..9f30a38152a3 100644
--- a/Documentation/devicetree/bindings/remoteproc/qcom,sm8550-pas.yaml
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,sm8550-pas.yaml
@@ -30,12 +30,14 @@ properties:
       - items:
           - enum:
               - qcom,glymur-adsp-pas
+              - qcom,hawi-adsp-pas
               - qcom,kaanapali-adsp-pas
               - qcom,sm8750-adsp-pas
           - const: qcom,sm8550-adsp-pas
       - items:
           - enum:
               - qcom,glymur-cdsp-pas
+              - qcom,hawi-cdsp-pas
               - qcom,kaanapali-cdsp-pas
           - const: qcom,sm8550-cdsp-pas
       - items:
@@ -104,6 +106,8 @@ allOf:
             enum:
               - qcom,glymur-adsp-pas
               - qcom,glymur-cdsp-pas
+              - qcom,hawi-adsp-pas
+              - qcom,hawi-cdsp-pas
               - qcom,kaanapali-adsp-pas
               - qcom,kaanapali-cdsp-pas
               - qcom,sm8750-adsp-pas
diff --git a/Documentation/devicetree/bindings/remoteproc/xlnx,zynqmp-r5fss.yaml b/Documentation/devicetree/bindings/remoteproc/xlnx,zynqmp-r5fss.yaml
index c7d5e58330d6..5ab19d70a344 100644
--- a/Documentation/devicetree/bindings/remoteproc/xlnx,zynqmp-r5fss.yaml
+++ b/Documentation/devicetree/bindings/remoteproc/xlnx,zynqmp-r5fss.yaml
@@ -128,6 +128,10 @@ patternProperties:
           - description: vring1
         additionalItems: true
 
+      firmware-name:
+        maxItems: 1
+        description: default firmware to load
+
     required:
       - compatible
       - reg