Merge branch 'newsoc/cix-p1' into soc/newsoc

Patches from Peter Chen <peter.chen@cixtech.com>:

Cixtech P1 (internal name sky1) is high performance generic Armv9 SoC.
Orion O6 is the Arm V9 Motherboard built by Radxa. You could find brief
introduction for SoC and related boards at:
https://radxa.com/products/orion/o6#overview

Currently, to run upstream kernel at Orion O6 board, you need to
use BIOS released by Radxa, and add "clk_ignore_unused=1" at bootargs.
https://docs.radxa.com/en/orion/o6/bios/install-bios

In this series, we add initial SoC and board support for Kernel building.
Since mailbox is used for SCMI clock communication, mailbox driver is added
in this series for the minimum SoC support.

Patch 1-2: add dt-binding doc for CIX and its sky1 SoC
Patch 3: add Arm64 build support
Patch 4-5: add CIX mailbox driver which needs to support SCMI clock protocol.
Patch 6: add Arm64 defconfig support
Patch 7-8: add initial dts support for SoC and Orion O6 board
Patch 9: add MAINTAINERS entry

* newsoc/cix-p1:
  MAINTAINERS: Add CIX SoC maintainer entry
  arm64: dts: cix: Add sky1 base dts initial support
  dt-bindings: clock: cix: Add CIX sky1 scmi clock id
  arm64: defconfig: Enable CIX SoC
  mailbox: add CIX mailbox driver
  dt-bindings: mailbox: add cix,sky1-mbox
  arm64: Kconfig: add ARCH_CIX for cix silicons
  dt-bindings: arm: add CIX P1 (SKY1) SoC
  dt-bindings: vendor-prefixes: Add CIX Technology Group Co., Ltd.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

3 files changed, 105 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/arm/cix.yaml b/Documentation/devicetree/bindings/arm/cix.yaml
new file mode 100644
index 000000000000..114dab4bc4d2
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/cix.yaml
@@ -0,0 +1,26 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/cix.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: CIX platforms
+
+maintainers:
+  - Peter Chen <peter.chen@cixtech.com>
+  - Fugang Duan <fugang.duan@cixtech.com>
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    oneOf:
+
+      - description: Radxa Orion O6
+        items:
+          - const: radxa,orion-o6
+          - const: cix,sky1
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/mailbox/cix,sky1-mbox.yaml b/Documentation/devicetree/bindings/mailbox/cix,sky1-mbox.yaml
new file mode 100644
index 000000000000..66d75b7bc8c8
--- /dev/null
+++ b/Documentation/devicetree/bindings/mailbox/cix,sky1-mbox.yaml
@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mailbox/cix,sky1-mbox.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cixtech mailbox controller
+
+maintainers:
+  - Guomin Chen <Guomin.Chen@cixtech.com>
+
+description:
+  The Cixtech mailbox controller, used in the Cixtech Sky1 SoC,
+  is used for message transmission between multiple processors
+  within the SoC, such as the AP, PM, audio DSP, SensorHub MCU,
+  and others
+
+  Each Cixtech mailbox controller is unidirectional, so they are
+  typically used in pairs-one for receiving and one for transmitting.
+
+  Each Cixtech mailbox supports 11 channels with different transmission modes
+    channel 0-7 - Fast channel with 32bit transmit register and IRQ support
+    channel 8   - Doorbell mode,using the mailbox as an interrupt-generating
+                   mechanism.
+    channel 9   - Fifo based channel with 32*32bit depth fifo and IRQ support
+    channel 10  - Reg based channel with 32*32bit transmit register and
+                   Doorbell+transmit acknowledgment IRQ support
+
+  In the CIX Sky1 SoC use case, there are 4 pairs of mailbox controllers
+    AP <--> PM - using Doorbell transfer mode
+    AP <--> SE - using REG transfer mode
+    AP <--> DSP - using FIFO transfer mode
+    AP <--> SensorHub - using FIFO transfer mode
+
+properties:
+  compatible:
+    const: cix,sky1-mbox
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  "#mbox-cells":
+    const: 1
+
+  cix,mbox-dir:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: Direction of the mailbox relative to the AP
+    enum: [tx, rx]
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - "#mbox-cells"
+  - cix,mbox-dir
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        mbox_ap2pm: mailbox@30000000 {
+            compatible = "cix,sky1-mbox";
+            reg = <0 0x30000000 0 0x10000>;
+            interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH 0>;
+            #mbox-cells = <1>;
+            cix,mbox-dir = "tx";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml
index 5d2a7a8d3ac6..f258c1f53b3c 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.yaml
+++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml
@@ -306,6 +306,8 @@ patternProperties:
     description: Cirrus Logic, Inc.
   "^cisco,.*":
     description: Cisco Systems, Inc.
+  "^cix,.*":
+    description: CIX Technology Group Co., Ltd.
   "^clockwork,.*":
     description: Clockwork Tech LLC
   "^cloos,.*":