Merge tag 'char-misc-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char / misc / IIO / and others driver updates from Greg KH:
 "Here is the char/misc/iio and other smaller driver subsystem updates
  for 7.1-rc1. Lots of stuff in here, all tiny, but relevant for the
  different drivers they touch. Major points in here is:

   - the usual large set of new IIO drivers and updates for that
     subsystem (the large majority of this diffstat)

   - lots of comedi driver updates and bugfixes

   - coresight driver updates

   - interconnect driver updates and additions

   - mei driver updates

   - binder (both rust and C versions) updates and fixes

   - lots of other smaller driver subsystem updates and additions

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'char-misc-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (405 commits)
  coresight: tpdm: fix invalid MMIO access issue
  mei: me: add nova lake point H DID
  mei: lb: add late binding version 2
  mei: bus: add mei_cldev_uuid
  w1: ds2490: drop redundant device reference
  bus: mhi: host: pci_generic: Add Telit FE912C04 modem support
  mei: csc: wake device while reading firmware status
  mei: csc: support controller with separate PCI device
  mei: convert PCI error to common errno
  mei: trace: print return value of pci_cfg_read
  mei: me: move trace into firmware status read
  mei: fix idle print specifiers
  mei: me: use PCI_DEVICE_DATA macro
  sonypi: Convert ACPI driver to a platform one
  misc: apds990x: fix all kernel-doc warnings
  most: usb: Use kzalloc_objs for endpoint address array
  hpet: Convert ACPI driver to a platform one
  misc: vmw_vmci: Fix spelling mistakes in comments
  parport: Remove completed item from to-do list
  char: remove unnecessary module_init/exit functions
  ...

32 files changed, 932 insertions, 195 deletions

diff --git a/Documentation/devicetree/bindings/extcon/extcon-ptn5150.yaml b/Documentation/devicetree/bindings/extcon/extcon-ptn5150.yaml
index 072b3c0c5fd0..79f88b5f4e5c 100644
--- a/Documentation/devicetree/bindings/extcon/extcon-ptn5150.yaml
+++ b/Documentation/devicetree/bindings/extcon/extcon-ptn5150.yaml
@@ -42,6 +42,9 @@ properties:
     description:
       A port node to link the usb controller for the dual role switch.
 
+  connector:
+    $ref: /schemas/connector/usb-connector.yaml#
+
 required:
   - compatible
   - interrupts
diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adxl372.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adxl372.yaml
index 0ba0df46c3a9..02e734946f44 100644
--- a/Documentation/devicetree/bindings/iio/accel/adi,adxl372.yaml
+++ b/Documentation/devicetree/bindings/iio/accel/adi,adxl372.yaml
@@ -4,20 +4,23 @@
 $id: http://devicetree.org/schemas/iio/accel/adi,adxl372.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Analog Devices ADXL372 3-Axis, +/-(200g) Digital Accelerometer
+title: Analog Devices ADXL371/ADXL372 3-Axis, +/-(200g) Digital Accelerometer
 
 maintainers:
   - Marcelo Schmitt <marcelo.schmitt@analog.com>
   - Nuno Sá <nuno.sa@analog.com>
+  - Antoniu Miclaus <antoniu.miclaus@analog.com>
 
 description: |
-  Analog Devices ADXL372 3-Axis, +/-(200g) Digital Accelerometer that supports
-  both I2C & SPI interfaces
+  Analog Devices ADXL371/ADXL372 3-Axis, +/-(200g) Digital Accelerometer that
+  supports both I2C & SPI interfaces
+    https://www.analog.com/en/products/adxl371.html
     https://www.analog.com/en/products/adxl372.html
 
 properties:
   compatible:
     enum:
+      - adi,adxl371
       - adi,adxl372
 
   reg:
diff --git a/Documentation/devicetree/bindings/iio/accel/bosch,bma255.yaml b/Documentation/devicetree/bindings/iio/accel/bosch,bma255.yaml
index c1387e02eb82..7f9c5eec35dd 100644
--- a/Documentation/devicetree/bindings/iio/accel/bosch,bma255.yaml
+++ b/Documentation/devicetree/bindings/iio/accel/bosch,bma255.yaml
@@ -16,25 +16,27 @@ description:
 
 properties:
   compatible:
-    enum:
-      # bmc150-accel driver in Linux
-      - bosch,bma222
-      - bosch,bma222e
-      - bosch,bma250e
-      - bosch,bma253
-      - bosch,bma254
-      - bosch,bma255
-      - bosch,bma280
-      - bosch,bmc150_accel
-      - bosch,bmc156_accel
-      - bosch,bmi055_accel
-
-      # bma180 driver in Linux
-      - bosch,bma023
-      - bosch,bma150
-      - bosch,bma180
-      - bosch,bma250
-      - bosch,smb380
+    oneOf:
+      - enum:
+          - bosch,bma222
+          - bosch,bma222e
+          - bosch,bma250e
+          - bosch,bma253
+          - bosch,bma254
+          - bosch,bma255
+          - bosch,bma280
+          - bosch,bmc150_accel
+          - bosch,bmc156_accel
+          - bosch,bmi055_accel
+
+          - bosch,bma023
+          - bosch,bma150
+          - bosch,bma180
+          - bosch,bma250
+          - bosch,smb380
+      - items:
+          - const: bosch,bmx055-accel
+          - const: bosch,bmc150_accel
 
   reg:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad4030.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad4030.yaml
index e22d518135f2..08b1f9d75f89 100644
--- a/Documentation/devicetree/bindings/iio/adc/adi,ad4030.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad4030.yaml
@@ -19,6 +19,10 @@ description: |
   * https://www.analog.com/media/en/technical-documentation/data-sheets/ad4030-24-4032-24.pdf
   * https://www.analog.com/media/en/technical-documentation/data-sheets/ad4630-24_ad4632-24.pdf
   * https://www.analog.com/media/en/technical-documentation/data-sheets/ad4630-16-4632-16.pdf
+  * https://www.analog.com/media/en/technical-documentation/data-sheets/adaq4216.pdf
+  * https://www.analog.com/media/en/technical-documentation/data-sheets/adaq4224.pdf
+
+$ref: /schemas/spi/spi-peripheral-props.yaml#
 
 properties:
   compatible:
@@ -29,6 +33,8 @@ properties:
       - adi,ad4630-24
       - adi,ad4632-16
       - adi,ad4632-24
+      - adi,adaq4216
+      - adi,adaq4224
 
   reg:
     maxItems: 1
@@ -60,6 +66,14 @@ properties:
     description:
       Internal buffered Reference. Used when ref-supply is not connected.
 
+  vddh-supply:
+    description:
+      PGIA Positive Power Supply.
+
+  vdd-fda-supply:
+    description:
+      FDA Positive Power Supply.
+
   cnv-gpios:
     description:
       The Convert Input (CNV). It initiates the sampling conversions.
@@ -70,6 +84,17 @@ properties:
       The Reset Input (/RST). Used for asynchronous device reset.
     maxItems: 1
 
+  pga-gpios:
+    description:
+      A0 and A1 pins for gain selection. For devices that have PGA configuration
+      input pins, pga-gpios should be defined.
+    minItems: 2
+    maxItems: 2
+
+  pwms:
+    description: PWM signal connected to the CNV pin.
+    maxItems: 1
+
   interrupts:
     description:
       The BUSY pin is used to signal that the conversions results are available
@@ -107,6 +132,22 @@ allOf:
       properties:
         spi-rx-bus-width:
           maxItems: 1
+  # ADAQ devices require a gain property to indicate how hardware PGA is set
+  - if:
+      properties:
+        compatible:
+          contains:
+            pattern: ^adi,adaq
+    then:
+      required:
+        - vddh-supply
+        - vdd-fda-supply
+        - pga-gpios
+      properties:
+        ref-supply: false
+    else:
+      properties:
+        pga-gpios: false
 
 examples:
   - |
@@ -148,3 +189,26 @@ examples:
             reset-gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
         };
     };
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@0 {
+            compatible = "adi,adaq4216";
+            reg = <0>;
+            spi-max-frequency = <80000000>;
+            vdd-5v-supply = <&supply_5V>;
+            vdd-1v8-supply = <&supply_1_8V>;
+            vio-supply = <&supply_1_8V>;
+            refin-supply = <&refin_sup>;
+            vddh-supply = <&vddh>;
+            vdd-fda-supply = <&vdd_fda>;
+            cnv-gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>;
+            reset-gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
+            pga-gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>,
+                        <&gpio0 3 GPIO_ACTIVE_HIGH>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad4080.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad4080.yaml
index ccd6a0ac1539..79df2696ef24 100644
--- a/Documentation/devicetree/bindings/iio/adc/adi,ad4080.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad4080.yaml
@@ -27,10 +27,13 @@ properties:
     enum:
       - adi,ad4080
       - adi,ad4081
+      - adi,ad4082
       - adi,ad4083
       - adi,ad4084
+      - adi,ad4085
       - adi,ad4086
       - adi,ad4087
+      - adi,ad4088
 
   reg:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7380.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7380.yaml
index b91bfb16ed6b..396e1a1aa805 100644
--- a/Documentation/devicetree/bindings/iio/adc/adi,ad7380.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7380.yaml
@@ -62,6 +62,11 @@ properties:
   spi-cpol: true
   spi-cpha: true
 
+  spi-rx-bus-width:
+    maxItems: 4
+    items:
+      maximum: 1
+
   vcc-supply:
     description: A 3V to 3.6V supply that powers the chip.
 
@@ -160,6 +165,23 @@ patternProperties:
 unevaluatedProperties: false
 
 allOf:
+  # 2-channel chips only have two SDO lines
+  - if:
+      properties:
+        compatible:
+          enum:
+            - adi,ad7380
+            - adi,ad7381
+            - adi,ad7383
+            - adi,ad7384
+            - adi,ad7386
+            - adi,ad7387
+            - adi,ad7388
+    then:
+      properties:
+        spi-rx-bus-width:
+          maxItems: 2
+
   # pseudo-differential chips require common mode voltage supplies,
   # true differential chips don't use them
   - if:
@@ -284,6 +306,7 @@ examples:
             spi-cpol;
             spi-cpha;
             spi-max-frequency = <80000000>;
+            spi-rx-bus-width = <1>, <1>, <1>, <1>;
 
             interrupts = <27 IRQ_TYPE_EDGE_FALLING>;
             interrupt-parent = <&gpio0>;
diff --git a/Documentation/devicetree/bindings/iio/adc/amlogic,meson-saradc.yaml b/Documentation/devicetree/bindings/iio/adc/amlogic,meson-saradc.yaml
index bb9825e7346d..70ab4e140e71 100644
--- a/Documentation/devicetree/bindings/iio/adc/amlogic,meson-saradc.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/amlogic,meson-saradc.yaml
@@ -27,7 +27,11 @@ properties:
               - amlogic,meson-gxm-saradc
               - amlogic,meson-axg-saradc
               - amlogic,meson-g12a-saradc
+          # Usage of this generic fallback is not allowed for new devices
           - const: amlogic,meson-saradc
+      - items:
+          - const: amlogic,meson-s4-saradc
+          - const: amlogic,meson-g12a-saradc
 
   reg:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/iio/adc/lltc,ltc2497.yaml b/Documentation/devicetree/bindings/iio/adc/lltc,ltc2497.yaml
index 5cc6a9684077..c884b6e03767 100644
--- a/Documentation/devicetree/bindings/iio/adc/lltc,ltc2497.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/lltc,ltc2497.yaml
@@ -11,6 +11,12 @@ maintainers:
   - Liam Beguin <liambeguin@gmail.com>
 
 description: |
+  LTC2305:
+    low noise, low power, 2-channel, 12-bit successive approximation ADC with an
+    I2C compatible serial interface.
+
+    https://www.analog.com/media/en/technical-documentation/data-sheets/23015fb.pdf
+
   LTC2309:
     low noise, low power, 8-channel, 12-bit successive approximation ADC with an
     I2C compatible serial interface.
@@ -28,6 +34,7 @@ description: |
 properties:
   compatible:
     enum:
+      - lltc,ltc2305
       - lltc,ltc2309
       - lltc,ltc2497
       - lltc,ltc2499
diff --git a/Documentation/devicetree/bindings/iio/adc/motorola,cpcap-adc.yaml b/Documentation/devicetree/bindings/iio/adc/motorola,cpcap-adc.yaml
index 9ceb6f18c854..1f77da7f8e06 100644
--- a/Documentation/devicetree/bindings/iio/adc/motorola,cpcap-adc.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/motorola,cpcap-adc.yaml
@@ -19,6 +19,7 @@ properties:
     enum:
       - motorola,cpcap-adc
       - motorola,mapphone-cpcap-adc
+      - motorola,mot-cpcap-adc
 
   interrupts:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-adc5-gen3.yaml b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-adc5-gen3.yaml
new file mode 100644
index 000000000000..149f4af8f4b8
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-adc5-gen3.yaml
@@ -0,0 +1,151 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/qcom,spmi-adc5-gen3.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm's SPMI PMIC ADC5 Gen3
+
+maintainers:
+  - Jishnu Prakash <jishnu.prakash@oss.qualcomm.com>
+
+description: |
+  SPMI PMIC5 Gen3 voltage ADC (ADC) provides interface to clients to read
+  voltage. It is a 16-bit sigma-delta ADC. It also performs the same thermal
+  monitoring function as the existing ADC_TM devices.
+
+  The interface is implemented on SDAM (Shared Direct Access Memory) peripherals
+  on the master PMIC rather than a dedicated ADC peripheral. The number of PMIC
+  SDAM peripherals allocated for ADC is not correlated with the PMIC used, it is
+  programmed in FW (PBS) and is fixed per SOC, based on the SOC requirements.
+  All boards using a particular (SOC + master PMIC) combination will have the
+  same number of ADC SDAMs supported on that PMIC.
+
+properties:
+  compatible:
+    const: qcom,spmi-adc5-gen3
+
+  reg:
+    items:
+      - description: SDAM0 base address in the SPMI PMIC register map
+      - description: SDAM1 base address
+    minItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  "#io-channel-cells":
+    const: 1
+
+  "#thermal-sensor-cells":
+    const: 1
+
+  interrupts:
+    items:
+      - description: SDAM0 end of conversion (EOC) interrupt
+      - description: SDAM1 EOC interrupt
+    minItems: 1
+
+patternProperties:
+  "^channel@[0-9a-f]+$":
+    type: object
+    unevaluatedProperties: false
+    $ref: /schemas/iio/adc/qcom,spmi-vadc-common.yaml
+    description:
+      Represents the external channels which are connected to the ADC.
+
+    properties:
+      qcom,decimation:
+        enum: [ 85, 340, 1360 ]
+        default: 1360
+
+      qcom,hw-settle-time:
+        enum: [ 15, 100, 200, 300, 400, 500, 600, 700,
+                1000, 2000, 4000, 8000, 16000, 32000, 64000, 128000 ]
+        default: 15
+
+      qcom,avg-samples:
+        enum: [ 1, 2, 4, 8, 16 ]
+        default: 1
+
+      qcom,adc-tm:
+        description:
+          ADC_TM is a threshold monitoring feature in HW which can be enabled
+          on any ADC channel, to trigger an IRQ for threshold violation. In
+          earlier ADC generations, it was implemented in a separate device
+          (documented in Documentation/devicetree/bindings/thermal/qcom-spmi-adc-tm5.yaml.)
+          In Gen3, this feature can be enabled in the same ADC device for any
+          channel and threshold monitoring and IRQ triggering are handled in FW
+          (PBS) instead of another dedicated HW block.
+          This property indicates ADC_TM monitoring is done on this channel.
+        type: boolean
+
+required:
+  - compatible
+  - reg
+  - "#address-cells"
+  - "#size-cells"
+  - "#io-channel-cells"
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    pmic {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      adc@9000 {
+        compatible = "qcom,spmi-adc5-gen3";
+        reg = <0x9000>, <0x9100>;
+        interrupts = <0x0 0x90 0x1 IRQ_TYPE_EDGE_RISING>,
+                      <0x0 0x91 0x1 IRQ_TYPE_EDGE_RISING>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+        #io-channel-cells = <1>;
+        #thermal-sensor-cells = <1>;
+
+        /* PMK8550 Channel nodes */
+        channel@3 {
+          reg = <0x3>;
+          label = "pmk8550_die_temp";
+          qcom,pre-scaling = <1 1>;
+        };
+
+        channel@44 {
+          reg = <0x44>;
+          label = "pmk8550_xo_therm";
+          qcom,pre-scaling = <1 1>;
+          qcom,ratiometric;
+          qcom,hw-settle-time = <200>;
+          qcom,adc-tm;
+        };
+
+        /* PM8550 Channel nodes */
+        channel@103 {
+          reg = <0x103>;
+          label = "pm8550_die_temp";
+          qcom,pre-scaling = <1 1>;
+        };
+
+        /* PM8550B Channel nodes */
+        channel@78f {
+          reg = <0x78f>;
+          label = "pm8550b_vbat_sns_qbg";
+          qcom,pre-scaling = <1 3>;
+        };
+
+        /* PM8550VS_C Channel nodes */
+        channel@203 {
+          reg = <0x203>;
+          label = "pm8550vs_c_die_temp";
+          qcom,pre-scaling = <1 1>;
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc-common.yaml b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc-common.yaml
new file mode 100644
index 000000000000..3ae252c17b91
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc-common.yaml
@@ -0,0 +1,84 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/qcom,spmi-vadc-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. SPMI PMIC ADC channels
+
+maintainers:
+  - Jishnu Prakash <jishnu.prakash@oss.qualcomm.com>
+
+description:
+  This defines the common properties used to define Qualcomm VADC channels.
+
+properties:
+  reg:
+    description:
+      ADC channel number (PMIC-specific for versions after PMIC5 ADC).
+    maxItems: 1
+
+  label:
+    description:
+      ADC input of the platform as seen in the schematics.
+      For thermistor inputs connected to generic AMUX or GPIO inputs
+      these can vary across platform for the same pins. Hence select
+      the platform schematics name for this channel.
+
+  qcom,decimation:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      This parameter is used to decrease ADC sampling rate.
+      Quicker measurements can be made by reducing decimation ratio.
+
+  qcom,pre-scaling:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description:
+      Used for scaling the channel input signal before the signal is
+      fed to VADC. The configuration for this node is to know the
+      pre-determined ratio and use it for post scaling. It is a pair of
+      integers, denoting the numerator and denominator of the fraction by which
+      input signal is multiplied. For example, <1 3> indicates the signal is scaled
+      down to 1/3 of its value before ADC measurement.
+      If property is not found default value depending on chip will be used.
+    oneOf:
+      - items:
+          - const: 1
+          - enum: [ 1, 3, 4, 6, 20, 8, 10, 16 ]
+      - items:
+          - const: 10
+          - const: 81
+
+  qcom,ratiometric:
+    type: boolean
+    description: |
+      Channel calibration type.
+      - For compatible property "qcom,spmi-vadc", if this property is
+        specified VADC will use the VDD reference (1.8V) and GND for
+        channel calibration. If property is not found, channel will be
+        calibrated with 0.625V and 1.25V reference channels, also
+        known as absolute calibration.
+      - For other compatible properties, if this property is specified
+        VADC will use the VDD reference (1.875V) and GND for channel
+        calibration. If property is not found, channel will be calibrated
+        with 0V and 1.25V reference channels, also known as absolute calibration.
+
+  qcom,hw-settle-time:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Time between AMUX getting configured and the ADC starting
+      conversion. The 'hw_settle_time' is an index used from valid values
+      and programmed in hardware to achieve the hardware settling delay.
+
+  qcom,avg-samples:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Number of samples to be used for measurement.
+      Averaging provides the option to obtain a single measurement
+      from the ADC that is an average of multiple samples. The value
+      selected is 2^(value).
+
+required:
+  - reg
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml
index b9dc04b0d307..72188041e8b5 100644
--- a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml
@@ -15,6 +15,8 @@ description: |
   voltage. The VADC is a 15-bit sigma-delta ADC.
   SPMI PMIC5/PMIC7 voltage ADC (ADC) provides interface to clients to read
   voltage. The VADC is a 16-bit sigma-delta ADC.
+  Note that PMIC7 ADC is the generation between PMIC5 and PMIC5 Gen3 ADC,
+  it can be considered like PMIC5 Gen2.
 
 properties:
   compatible:
@@ -56,7 +58,7 @@ required:
 patternProperties:
   "^channel@[0-9a-f]+$":
     type: object
-    additionalProperties: false
+    unevaluatedProperties: false
     description: |
       Represents the external channels which are connected to the ADC.
       For compatible property "qcom,spmi-vadc" following channels, also known as
@@ -64,79 +66,7 @@ patternProperties:
       configuration nodes should be defined:
       VADC_REF_625MV and/or VADC_SPARE1(based on PMIC version) VADC_REF_1250MV,
       VADC_GND_REF and VADC_VDD_VADC.
-
-    properties:
-      reg:
-        maxItems: 1
-        description: |
-          ADC channel number.
-          See include/dt-bindings/iio/qcom,spmi-vadc.h
-          For PMIC7 ADC, the channel numbers are specified separately per PMIC
-          in the PMIC-specific files in include/dt-bindings/iio/.
-
-      label:
-        description: |
-            ADC input of the platform as seen in the schematics.
-            For thermistor inputs connected to generic AMUX or GPIO inputs
-            these can vary across platform for the same pins. Hence select
-            the platform schematics name for this channel.
-
-      qcom,decimation:
-        $ref: /schemas/types.yaml#/definitions/uint32
-        description: |
-            This parameter is used to decrease ADC sampling rate.
-            Quicker measurements can be made by reducing decimation ratio.
-
-      qcom,pre-scaling:
-        description: |
-            Used for scaling the channel input signal before the signal is
-            fed to VADC. The configuration for this node is to know the
-            pre-determined ratio and use it for post scaling. It is a pair of
-            integers, denoting the numerator and denominator of the fraction by which
-            input signal is multiplied. For example, <1 3> indicates the signal is scaled
-            down to 1/3 of its value before ADC measurement.
-            If property is not found default value depending on chip will be used.
-        $ref: /schemas/types.yaml#/definitions/uint32-array
-        oneOf:
-          - items:
-              - const: 1
-              - enum: [ 1, 3, 4, 6, 20, 8, 10, 16 ]
-          - items:
-              - const: 10
-              - const: 81
-
-      qcom,ratiometric:
-        description: |
-            Channel calibration type.
-            - For compatible property "qcom,spmi-vadc", if this property is
-              specified VADC will use the VDD reference (1.8V) and GND for
-              channel calibration. If property is not found, channel will be
-              calibrated with 0.625V and 1.25V reference channels, also
-              known as absolute calibration.
-            - For compatible property "qcom,spmi-adc5", "qcom,spmi-adc7" and
-              "qcom,spmi-adc-rev2", if this property is specified VADC will use
-              the VDD reference (1.875V) and GND for channel calibration. If
-              property is not found, channel will be calibrated with 0V and 1.25V
-              reference channels, also known as absolute calibration.
-        type: boolean
-
-      qcom,hw-settle-time:
-        $ref: /schemas/types.yaml#/definitions/uint32
-        description: |
-            Time between AMUX getting configured and the ADC starting
-            conversion. The 'hw_settle_time' is an index used from valid values
-            and programmed in hardware to achieve the hardware settling delay.
-
-      qcom,avg-samples:
-        $ref: /schemas/types.yaml#/definitions/uint32
-        description: |
-            Number of samples to be used for measurement.
-            Averaging provides the option to obtain a single measurement
-            from the ADC that is an average of multiple samples. The value
-            selected is 2^(value).
-
-    required:
-      - reg
+    $ref: /schemas/iio/adc/qcom,spmi-vadc-common.yaml
 
 allOf:
   - if:
diff --git a/Documentation/devicetree/bindings/iio/amplifiers/adi,ad8366.yaml b/Documentation/devicetree/bindings/iio/amplifiers/adi,ad8366.yaml
new file mode 100644
index 000000000000..065637ce33a5
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/amplifiers/adi,ad8366.yaml
@@ -0,0 +1,101 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/amplifiers/adi,ad8366.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: AD8366 and similar Gain Amplifiers and Digital Attenuators
+
+maintainers:
+  - Michael Hennerich <michael.hennerich@analog.com>
+  - Rodrigo Alencar <rodrigo.alencar@analog.com>
+
+description:
+  Digital Variable Gain Amplifiers (VGAs) and Digital Attenuators with
+  SPI interface.
+
+properties:
+  compatible:
+    enum:
+      - adi,ad8366
+      - adi,ada4961
+      - adi,adl5240
+      - adi,adrf5702
+      - adi,adrf5703
+      - adi,adrf5720
+      - adi,adrf5730
+      - adi,adrf5731
+      - adi,hmc271a
+      - adi,hmc792a
+      - adi,hmc1018a
+      - adi,hmc1019a
+      - adi,hmc1119
+
+  reg:
+    maxItems: 1
+
+  vcc-supply:
+    description: Regulator that provides power to the device.
+
+  reset-gpios:
+    maxItems: 1
+
+  enable-gpios:
+    maxItems: 1
+    description: Power-up or Serial Mode Enable GPIO.
+
+required:
+  - compatible
+  - reg
+  - vcc-supply
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              const: adi,hmc271a
+    then:
+      properties:
+        reset-gpios: false
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              anyOf:
+                - const: adi,ad8366
+                - const: adi,ada4961
+                - const: adi,adrf5702
+                - const: adi,adrf5703
+                - const: adi,adrf5720
+                - const: adi,adrf5730
+                - const: adi,adrf5731
+                - const: adi,hmc792a
+                - const: adi,hmc1018a
+                - const: adi,hmc1019a
+                - const: adi,hmc1119
+    then:
+      properties:
+        enable-gpios: false
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    spi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      amplifier@0 {
+        compatible = "adi,ad8366";
+        reg = <0>;
+        spi-max-frequency = <1000000>;
+        vcc-supply = <&vcc_3v3>;
+        enable-gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/dac/lltc,ltc2632.yaml b/Documentation/devicetree/bindings/iio/dac/lltc,ltc2632.yaml
index 733edc7d6d17..50a9cbb44e36 100644
--- a/Documentation/devicetree/bindings/iio/dac/lltc,ltc2632.yaml
+++ b/Documentation/devicetree/bindings/iio/dac/lltc,ltc2632.yaml
@@ -4,36 +4,49 @@
 $id: http://devicetree.org/schemas/iio/dac/lltc,ltc2632.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Linear Technology LTC263x 12-/10-/8-Bit Rail-to-Rail DAC
+title: Linear Technology LTC263x and LTC2654 Rail-to-Rail DAC
 
 maintainers:
   - Michael Hennerich <michael.hennerich@analog.com>
 
 description: |
-  Bindings for the Linear Technology LTC2632/2634/2636 DAC
-  Datasheet can be found here: https://www.analog.com/media/en/technical-documentation/data-sheets/LTC263[246].pdf
+  Bindings for the Linear Technology LTC2632/2634/2636/2654 DAC
+  Datasheet can be found here:
+    https://www.analog.com/media/en/technical-documentation/data-sheets/LTC263[246].pdf
+    https://www.analog.com/media/en/technical-documentation/data-sheets/2654f.pdf
 
 properties:
   compatible:
-    enum:
-      - lltc,ltc2632-l12
-      - lltc,ltc2632-l10
-      - lltc,ltc2632-l8
-      - lltc,ltc2632-h12
-      - lltc,ltc2632-h10
-      - lltc,ltc2632-h8
-      - lltc,ltc2634-l12
-      - lltc,ltc2634-l10
-      - lltc,ltc2634-l8
-      - lltc,ltc2634-h12
-      - lltc,ltc2634-h10
-      - lltc,ltc2634-h8
-      - lltc,ltc2636-l12
-      - lltc,ltc2636-l10
-      - lltc,ltc2636-l8
-      - lltc,ltc2636-h12
-      - lltc,ltc2636-h10
-      - lltc,ltc2636-h8
+    oneOf:
+      - enum:
+          - lltc,ltc2632-l12
+          - lltc,ltc2632-l10
+          - lltc,ltc2632-l8
+          - lltc,ltc2632-h12
+          - lltc,ltc2632-h10
+          - lltc,ltc2632-h8
+          - lltc,ltc2634-l12
+          - lltc,ltc2634-l10
+          - lltc,ltc2634-l8
+          - lltc,ltc2634-h12
+          - lltc,ltc2634-h10
+          - lltc,ltc2634-h8
+          - lltc,ltc2636-l12
+          - lltc,ltc2636-l10
+          - lltc,ltc2636-l8
+          - lltc,ltc2636-h12
+          - lltc,ltc2636-h10
+          - lltc,ltc2636-h8
+          - lltc,ltc2654-l16
+          - lltc,ltc2654-h16
+      - items:
+          - enum:
+              - lltc,ltc2654-l12
+          - const: lltc,ltc2634-l12
+      - items:
+          - enum:
+              - lltc,ltc2654-h12
+          - const: lltc,ltc2634-h12
 
   reg:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/iio/dac/maxim,ds4424.yaml b/Documentation/devicetree/bindings/iio/dac/maxim,ds4424.yaml
index 264fa7c5fe3a..4323df2036ac 100644
--- a/Documentation/devicetree/bindings/iio/dac/maxim,ds4424.yaml
+++ b/Documentation/devicetree/bindings/iio/dac/maxim,ds4424.yaml
@@ -4,18 +4,21 @@
 $id: http://devicetree.org/schemas/iio/dac/maxim,ds4424.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Maxim Integrated DS4422/DS4424 7-bit Sink/Source Current DAC
+title: Maxim Integrated DS4402/DS4404 and DS4422/DS4424 Current DACs
 
 maintainers:
   - Ismail Kose <ihkose@gmail.com>
 
 description: |
-  Datasheet publicly available at:
+  Datasheets publicly available at:
+  https://datasheets.maximintegrated.com/en/ds/DS4402-DS4404.pdf
   https://datasheets.maximintegrated.com/en/ds/DS4422-DS4424.pdf
 
 properties:
   compatible:
     enum:
+      - maxim,ds4402
+      - maxim,ds4404
       - maxim,ds4422
       - maxim,ds4424
 
@@ -24,9 +27,43 @@ properties:
 
   vcc-supply: true
 
+  maxim,rfs-ohms:
+    description: |
+      Array of resistance values in Ohms for the external Rfs resistors
+      connected to the FS pins. These values determine the full-scale
+      output current. The actual resistance depends on the chip variant
+      and specific hardware design requirements.
+    minItems: 2
+    maxItems: 4
+
 required:
   - compatible
   - reg
+  - maxim,rfs-ohms
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - maxim,ds4402
+              - maxim,ds4422
+    then:
+      properties:
+        maxim,rfs-ohms:
+          maxItems: 2
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - maxim,ds4404
+              - maxim,ds4424
+    then:
+      properties:
+        maxim,rfs-ohms:
+          minItems: 4
 
 additionalProperties: false
 
@@ -40,6 +77,7 @@ examples:
             compatible = "maxim,ds4424";
             reg = <0x10>; /* When A0, A1 pins are ground */
             vcc-supply = <&vcc_3v3>;
+            maxim,rfs-ohms = <40000>, <40000>, <40000>, <40000>;
         };
     };
 ...
diff --git a/Documentation/devicetree/bindings/iio/dac/ti,dac7612.yaml b/Documentation/devicetree/bindings/iio/dac/ti,dac7612.yaml
index 20dd1370660d..624c640be4c8 100644
--- a/Documentation/devicetree/bindings/iio/dac/ti,dac7612.yaml
+++ b/Documentation/devicetree/bindings/iio/dac/ti,dac7612.yaml
@@ -9,7 +9,7 @@ title: Texas Instruments DAC7612 family of DACs
 description:
   The DAC7612 is a dual, 12-bit digital-to-analog converter (DAC) with
   guaranteed 12-bit monotonicity performance over the industrial temperature
-  range. Is is programmable through an SPI interface.
+  range. It is programmable through an SPI interface.
 
 maintainers:
   - Ricardo Ribalda Delgado <ricardo@ribalda.com>
diff --git a/Documentation/devicetree/bindings/iio/gyroscope/bosch,bmg160.yaml b/Documentation/devicetree/bindings/iio/gyroscope/bosch,bmg160.yaml
index 3c6fe74af0b8..fcbd4b430e48 100644
--- a/Documentation/devicetree/bindings/iio/gyroscope/bosch,bmg160.yaml
+++ b/Documentation/devicetree/bindings/iio/gyroscope/bosch,bmg160.yaml
@@ -11,10 +11,14 @@ maintainers:
 
 properties:
   compatible:
-    enum:
-      - bosch,bmg160
-      - bosch,bmi055_gyro
-      - bosch,bmi088_gyro
+    oneOf:
+      - enum:
+          - bosch,bmg160
+          - bosch,bmi055_gyro
+          - bosch,bmi088_gyro
+      - items:
+          - const: bosch,bmx055-gyro
+          - const: bosch,bmg160
 
   reg:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/iio/light/vishay,vcnl4000.yaml b/Documentation/devicetree/bindings/iio/light/vishay,vcnl4000.yaml
index 4d1a225e8868..516afef7a545 100644
--- a/Documentation/devicetree/bindings/iio/light/vishay,vcnl4000.yaml
+++ b/Documentation/devicetree/bindings/iio/light/vishay,vcnl4000.yaml
@@ -18,16 +18,32 @@ allOf:
 
 properties:
   compatible:
-    enum:
-      - vishay,vcnl4000
-      - vishay,vcnl4010
-      - vishay,vcnl4020
-      - vishay,vcnl4040
-      - vishay,vcnl4200
+    oneOf:
+      - enum:
+          - capella,cm36672p
+          - vishay,vcnl4000
+          - vishay,vcnl4010
+          - vishay,vcnl4020
+          - vishay,vcnl4040
+          - vishay,vcnl4200
+      - items:
+          - const: capella,cm36686
+          - const: vishay,vcnl4040
 
   interrupts:
     maxItems: 1
 
+  vdd-supply:
+    description: Regulator providing power to the "VDD" pin.
+
+  vio-supply:
+    description: Regulator providing power for pull-up of the I/O lines.
+      Does not connect to the sensor directly, but is needed for the
+      correct operation of the I2C and interrupt lines.
+
+  vled-supply:
+    description: Regulator providing power to the IR anode pin.
+
   reg:
     maxItems: 1
 
@@ -49,6 +65,9 @@ examples:
             compatible = "vishay,vcnl4200";
             reg = <0x51>;
             proximity-near-level = <220>;
+            vdd-supply = <&reg_vdd>;
+            vio-supply = <&reg_vio>;
+            vled-supply = <&reg_vled>;
         };
     };
 ...
diff --git a/Documentation/devicetree/bindings/iio/magnetometer/bosch,bmc150_magn.yaml b/Documentation/devicetree/bindings/iio/magnetometer/bosch,bmc150_magn.yaml
index a3838ab0c524..c1a6892b0194 100644
--- a/Documentation/devicetree/bindings/iio/magnetometer/bosch,bmc150_magn.yaml
+++ b/Documentation/devicetree/bindings/iio/magnetometer/bosch,bmc150_magn.yaml
@@ -21,11 +21,15 @@ properties:
     description:
       Note the bmm150_magn is a deprecated compatible as this part contains only
       a magnetometer.
-    enum:
-      - bosch,bmc150_magn
-      - bosch,bmc156_magn
-      - bosch,bmm150
-      - bosch,bmm150_magn
+    oneOf:
+      - enum:
+          - bosch,bmc150_magn
+          - bosch,bmc156_magn
+          - bosch,bmm150
+          - bosch,bmm150_magn
+      - items:
+          - const: bosch,bmx055-magn
+          - const: bosch,bmc150_magn
 
   reg:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/iio/proximity/st,vl53l0x.yaml b/Documentation/devicetree/bindings/iio/proximity/st,vl53l0x.yaml
index 322befc41de6..f7f8be1e379d 100644
--- a/Documentation/devicetree/bindings/iio/proximity/st,vl53l0x.yaml
+++ b/Documentation/devicetree/bindings/iio/proximity/st,vl53l0x.yaml
@@ -4,14 +4,17 @@
 $id: http://devicetree.org/schemas/iio/proximity/st,vl53l0x.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: ST VL53L0X ToF ranging sensor
+title: ST VL53L0X/VL53L1X ToF ranging sensor
 
 maintainers:
   - Song Qiang <songqiang1304521@gmail.com>
+  - Siratul Islam <email@sirat.me>
 
 properties:
   compatible:
-    const: st,vl53l0x
+    enum:
+      - st,vl53l0x
+      - st,vl53l1x
 
   reg:
     maxItems: 1
@@ -21,6 +24,8 @@ properties:
 
   reset-gpios:
     maxItems: 1
+    description:
+      Phandle to the XSHUT GPIO. Used for hardware reset.
 
   vdd-supply: true
 
@@ -28,6 +33,16 @@ required:
   - compatible
   - reg
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: st,vl53l1x
+    then:
+      required:
+        - vdd-supply
+
 additionalProperties: false
 
 examples:
@@ -38,8 +53,9 @@ examples:
         #size-cells = <0>;
 
         proximity@29 {
-            compatible = "st,vl53l0x";
+            compatible = "st,vl53l1x";
             reg = <0x29>;
+            vdd-supply = <&reg_3v3>;
             interrupt-parent = <&gpio>;
             interrupts = <23 IRQ_TYPE_EDGE_FALLING>;
         };
diff --git a/Documentation/devicetree/bindings/iio/proximity/tyhx,hx9023s.yaml b/Documentation/devicetree/bindings/iio/proximity/tyhx,hx9023s.yaml
index 64ce8bc8bd36..cc5b5284c267 100644
--- a/Documentation/devicetree/bindings/iio/proximity/tyhx,hx9023s.yaml
+++ b/Documentation/devicetree/bindings/iio/proximity/tyhx,hx9023s.yaml
@@ -28,6 +28,9 @@ properties:
 
   vdd-supply: true
 
+  firmware-name:
+    maxItems: 1
+
   "#address-cells":
     const: 1
 
@@ -65,6 +68,7 @@ examples:
         interrupt-parent = <&pio>;
         interrupts = <16 IRQ_TYPE_EDGE_FALLING>;
         vdd-supply = <&pp1800_prox>;
+        firmware-name = "hx9023s.bin";
 
         #address-cells = <1>;
         #size-cells = <0>;
diff --git a/Documentation/devicetree/bindings/interconnect/qcom,glymur-rpmh.yaml b/Documentation/devicetree/bindings/interconnect/qcom,glymur-rpmh.yaml
index d55a7bcf5591..f69b2facb658 100644
--- a/Documentation/devicetree/bindings/interconnect/qcom,glymur-rpmh.yaml
+++ b/Documentation/devicetree/bindings/interconnect/qcom,glymur-rpmh.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/interconnect/qcom,glymur-rpmh.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm RPMh Network-On-Chip Interconnect on GLYMUR
+title: Qualcomm RPMh Network-On-Chip Interconnect on Glymur and Mahua SoCs
 
 maintainers:
   - Raviteja Laggyshetty <raviteja.laggyshetty@oss.qualcomm.com>
@@ -21,28 +21,98 @@ description: |
 
 properties:
   compatible:
-    enum:
-      - qcom,glymur-aggre1-noc
-      - qcom,glymur-aggre2-noc
-      - qcom,glymur-aggre3-noc
-      - qcom,glymur-aggre4-noc
-      - qcom,glymur-clk-virt
-      - qcom,glymur-cnoc-cfg
-      - qcom,glymur-cnoc-main
-      - qcom,glymur-hscnoc
-      - qcom,glymur-lpass-ag-noc
-      - qcom,glymur-lpass-lpiaon-noc
-      - qcom,glymur-lpass-lpicx-noc
-      - qcom,glymur-mc-virt
-      - qcom,glymur-mmss-noc
-      - qcom,glymur-nsinoc
-      - qcom,glymur-nsp-noc
-      - qcom,glymur-oobm-ss-noc
-      - qcom,glymur-pcie-east-anoc
-      - qcom,glymur-pcie-east-slv-noc
-      - qcom,glymur-pcie-west-anoc
-      - qcom,glymur-pcie-west-slv-noc
-      - qcom,glymur-system-noc
+    oneOf:
+      - items:
+          - enum:
+              - qcom,mahua-aggre1-noc
+          - const: qcom,glymur-aggre1-noc
+      - items:
+          - enum:
+              - qcom,mahua-aggre2-noc
+          - const: qcom,glymur-aggre2-noc
+      - items:
+          - enum:
+              - qcom,mahua-aggre3-noc
+          - const: qcom,glymur-aggre3-noc
+      - items:
+          - enum:
+              - qcom,mahua-aggre4-noc
+          - const: qcom,glymur-aggre4-noc
+      - items:
+          - enum:
+              - qcom,mahua-clk-virt
+          - const: qcom,glymur-clk-virt
+      - items:
+          - enum:
+              - qcom,mahua-cnoc-main
+          - const: qcom,glymur-cnoc-main
+      - items:
+          - enum:
+              - qcom,mahua-lpass-ag-noc
+          - const: qcom,glymur-lpass-ag-noc
+      - items:
+          - enum:
+              - qcom,mahua-lpass-lpiaon-noc
+          - const: qcom,glymur-lpass-lpiaon-noc
+      - items:
+          - enum:
+              - qcom,mahua-lpass-lpicx-noc
+          - const: qcom,glymur-lpass-lpicx-noc
+      - items:
+          - enum:
+              - qcom,mahua-mmss-noc
+          - const: qcom,glymur-mmss-noc
+      - items:
+          - enum:
+              - qcom,mahua-nsinoc
+          - const: qcom,glymur-nsinoc
+      - items:
+          - enum:
+              - qcom,mahua-nsp-noc
+          - const: qcom,glymur-nsp-noc
+      - items:
+          - enum:
+              - qcom,mahua-oobm-ss-noc
+          - const: qcom,glymur-oobm-ss-noc
+      - items:
+          - enum:
+              - qcom,mahua-pcie-east-anoc
+          - const: qcom,glymur-pcie-east-anoc
+      - items:
+          - enum:
+              - qcom,mahua-pcie-east-slv-noc
+          - const: qcom,glymur-pcie-east-slv-noc
+      - items:
+          - enum:
+              - qcom,mahua-system-noc
+          - const: qcom,glymur-system-noc
+      - enum:
+          - qcom,glymur-aggre1-noc
+          - qcom,glymur-aggre2-noc
+          - qcom,glymur-aggre3-noc
+          - qcom,glymur-aggre4-noc
+          - qcom,glymur-clk-virt
+          - qcom,glymur-cnoc-cfg
+          - qcom,glymur-cnoc-main
+          - qcom,glymur-hscnoc
+          - qcom,glymur-lpass-ag-noc
+          - qcom,glymur-lpass-lpiaon-noc
+          - qcom,glymur-lpass-lpicx-noc
+          - qcom,glymur-mc-virt
+          - qcom,glymur-mmss-noc
+          - qcom,glymur-nsinoc
+          - qcom,glymur-nsp-noc
+          - qcom,glymur-oobm-ss-noc
+          - qcom,glymur-pcie-east-anoc
+          - qcom,glymur-pcie-east-slv-noc
+          - qcom,glymur-pcie-west-anoc
+          - qcom,glymur-pcie-west-slv-noc
+          - qcom,glymur-system-noc
+          - qcom,mahua-cnoc-cfg
+          - qcom,mahua-hscnoc
+          - qcom,mahua-mc-virt
+          - qcom,mahua-pcie-west-anoc
+          - qcom,mahua-pcie-west-slv-noc
 
   reg:
     maxItems: 1
@@ -63,6 +133,7 @@ allOf:
             enum:
               - qcom,glymur-clk-virt
               - qcom,glymur-mc-virt
+              - qcom,mahua-mc-virt
     then:
       properties:
         reg: false
@@ -90,6 +161,20 @@ allOf:
         compatible:
           contains:
             enum:
+              - qcom,mahua-pcie-west-anoc
+    then:
+      properties:
+        clocks:
+          items:
+            - description: aggre PCIE_3B WEST AXI clock
+            - description: aggre PCIE_4 WEST AXI clock
+            - description: aggre PCIE_6 WEST AXI clock
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
               - qcom,glymur-pcie-east-anoc
     then:
       properties:
@@ -131,10 +216,11 @@ allOf:
         compatible:
           contains:
             enum:
-              - qcom,glymur-pcie-west-anoc
-              - qcom,glymur-pcie-east-anoc
               - qcom,glymur-aggre2-noc
               - qcom,glymur-aggre4-noc
+              - qcom,glymur-pcie-east-anoc
+              - qcom,glymur-pcie-west-anoc
+              - qcom,mahua-pcie-west-anoc
     then:
       required:
         - clocks
diff --git a/Documentation/devicetree/bindings/interconnect/qcom,msm8974.yaml b/Documentation/devicetree/bindings/interconnect/qcom,msm8974.yaml
index 95ce25ce1f7d..b35f6dd11c71 100644
--- a/Documentation/devicetree/bindings/interconnect/qcom,msm8974.yaml
+++ b/Documentation/devicetree/bindings/interconnect/qcom,msm8974.yaml
@@ -26,27 +26,34 @@ properties:
       - qcom,msm8974-pnoc
       - qcom,msm8974-snoc
 
-  '#interconnect-cells':
-    const: 1
-
   clock-names:
     items:
       - const: bus
-      - const: bus_a
 
   clocks:
     items:
       - description: Bus Clock
-      - description: Bus A Clock
 
 required:
   - compatible
   - reg
-  - '#interconnect-cells'
-  - clock-names
-  - clocks
 
-additionalProperties: false
+unevaluatedProperties: false
+
+allOf:
+  - $ref: qcom,rpm-common.yaml#
+  - if:
+      properties:
+        compatible:
+          const: qcom,msm8974-mmssnoc
+    then:
+      required:
+        - clocks
+        - clock-names
+    else:
+      properties:
+        clocks: false
+        clock-names: false
 
 examples:
   - |
@@ -56,7 +63,4 @@ examples:
         reg = <0xfc380000 0x6a000>;
         compatible = "qcom,msm8974-bimc";
         #interconnect-cells = <1>;
-        clock-names = "bus", "bus_a";
-        clocks = <&rpmcc RPM_SMD_BIMC_CLK>,
-                 <&rpmcc RPM_SMD_BIMC_A_CLK>;
     };
diff --git a/Documentation/devicetree/bindings/interconnect/qcom,osm-l3.yaml b/Documentation/devicetree/bindings/interconnect/qcom,osm-l3.yaml
index 6182599eb3c1..41b9f758bf8b 100644
--- a/Documentation/devicetree/bindings/interconnect/qcom,osm-l3.yaml
+++ b/Documentation/devicetree/bindings/interconnect/qcom,osm-l3.yaml
@@ -35,6 +35,7 @@ properties:
               - qcom,sm6375-cpucp-l3
               - qcom,sm8250-epss-l3
               - qcom,sm8350-epss-l3
+              - qcom,sm8550-epss-l3
               - qcom,sm8650-epss-l3
           - const: qcom,epss-l3
       - items:
diff --git a/Documentation/devicetree/bindings/interconnect/qcom,qcs615-rpmh.yaml b/Documentation/devicetree/bindings/interconnect/qcom,qcs615-rpmh.yaml
index e06404828824..a9cd49bbe247 100644
--- a/Documentation/devicetree/bindings/interconnect/qcom,qcs615-rpmh.yaml
+++ b/Documentation/devicetree/bindings/interconnect/qcom,qcs615-rpmh.yaml
@@ -34,6 +34,13 @@ properties:
   reg:
     maxItems: 1
 
+  clocks:
+    items:
+      - description: aggre UFS PHY AXI clock
+      - description: aggre USB2 SEC AXI clock
+      - description: aggre USB3 PRIM AXI clock
+      - description: RPMH CC IPA clock
+
 required:
   - compatible
 
@@ -53,6 +60,22 @@ allOf:
       required:
         - reg
 
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,qcs615-camnoc-virt
+              - qcom,qcs615-config-noc
+              - qcom,qcs615-dc-noc
+              - qcom,qcs615-gem-noc
+              - qcom,qcs615-mc-virt
+              - qcom,qcs615-mmss-noc
+              - qcom,qcs615-system-noc
+    then:
+      properties:
+        clocks: false
+
 unevaluatedProperties: false
 
 examples:
diff --git a/Documentation/devicetree/bindings/interconnect/qcom,qcs8300-rpmh.yaml b/Documentation/devicetree/bindings/interconnect/qcom,qcs8300-rpmh.yaml
index e9f528d6d9a8..88fe17277110 100644
--- a/Documentation/devicetree/bindings/interconnect/qcom,qcs8300-rpmh.yaml
+++ b/Documentation/devicetree/bindings/interconnect/qcom,qcs8300-rpmh.yaml
@@ -35,6 +35,10 @@ properties:
   reg:
     maxItems: 1
 
+  clocks:
+    minItems: 1
+    maxItems: 4
+
 required:
   - compatible
 
@@ -54,6 +58,64 @@ allOf:
       required:
         - reg
 
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,qcs8300-aggre1-noc
+    then:
+      properties:
+        clocks:
+          items:
+            - description: aggre UFS PHY AXI clock
+            - description: aggre QUP PRIM AXI clock
+            - description: aggre USB2 PRIM AXI clock
+            - description: aggre USB3 PRIM AXI clock
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,qcs8300-aggre2-noc
+    then:
+      properties:
+        clocks:
+          items:
+            - description: RPMH CC IPA clock
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,qcs8300-gem-noc
+    then:
+      properties:
+        clocks:
+          items:
+            - description: GCC DDRSS GPU AXI clock
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,qcs8300-clk-virt
+              - qcom,qcs8300-config-noc
+              - qcom,qcs8300-dc-noc
+              - qcom,qcs8300-gpdsp-anoc
+              - qcom,qcs8300-lpass-ag-noc
+              - qcom,qcs8300-mc-virt
+              - qcom,qcs8300-mmss-noc
+              - qcom,qcs8300-nspa-noc
+              - qcom,qcs8300-pcie-anoc
+              - qcom,qcs8300-system-noc
+    then:
+      properties:
+        clocks: false
+
 unevaluatedProperties: false
 
 examples:
@@ -63,6 +125,7 @@ examples:
         reg = <0x9100000 0xf7080>;
         #interconnect-cells = <2>;
         qcom,bcm-voters = <&apps_bcm_voter>;
+        clocks = <&gcc_ddrss_gpu_axi_clk>;
     };
 
     clk_virt: interconnect-0 {
diff --git a/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml b/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml
index e5931d18d998..644c42b5e2e5 100644
--- a/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml
+++ b/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml
@@ -135,6 +135,7 @@ patternProperties:
   "^adc@[0-9a-f]+$":
     type: object
     oneOf:
+      - $ref: /schemas/iio/adc/qcom,spmi-adc5-gen3.yaml#
       - $ref: /schemas/iio/adc/qcom,spmi-iadc.yaml#
       - $ref: /schemas/iio/adc/qcom,spmi-rradc.yaml#
       - $ref: /schemas/iio/adc/qcom,spmi-vadc.yaml#
diff --git a/Documentation/devicetree/bindings/misc/qcom,fastrpc.yaml b/Documentation/devicetree/bindings/misc/qcom,fastrpc.yaml
index d8e47db677cc..ca830dd06de2 100644
--- a/Documentation/devicetree/bindings/misc/qcom,fastrpc.yaml
+++ b/Documentation/devicetree/bindings/misc/qcom,fastrpc.yaml
@@ -18,9 +18,14 @@ description: |
 
 properties:
   compatible:
-    enum:
-      - qcom,kaanapali-fastrpc
-      - qcom,fastrpc
+    oneOf:
+      - enum:
+          - qcom,kaanapali-fastrpc
+          - qcom,fastrpc
+      - items:
+          - enum:
+              - qcom,glymur-fastrpc
+          - const: qcom,kaanapali-fastrpc
 
   label:
     enum:
diff --git a/Documentation/devicetree/bindings/misc/ti,fpc202.yaml b/Documentation/devicetree/bindings/misc/ti,fpc202.yaml
index a8cb10f2d0df..71c5859d2e13 100644
--- a/Documentation/devicetree/bindings/misc/ti,fpc202.yaml
+++ b/Documentation/devicetree/bindings/misc/ti,fpc202.yaml
@@ -53,6 +53,22 @@ patternProperties:
 
     unevaluatedProperties: false
 
+  "^led@1[4-b]$":
+    $ref: /schemas/leds/common.yaml#
+    description: Output GPIO line with advanced LED features enabled.
+
+    properties:
+      reg:
+        minimum: 0x14
+        maximum: 0x1b
+        description:
+          GPIO line ID
+
+    required:
+      - reg
+
+    unevaluatedProperties: false
+
 required:
   - compatible
   - reg
@@ -89,6 +105,11 @@ examples:
                 #size-cells = <0>;
                 reg = <1>;
             };
+
+            led@14 {
+                reg = <0x14>;
+                label = "phy0:green:indicator";
+            };
         };
     };
 ...
diff --git a/Documentation/devicetree/bindings/nvmem/layouts/kontron,sl28-vpd.yaml b/Documentation/devicetree/bindings/nvmem/layouts/kontron,sl28-vpd.yaml
index afd1919c6b1c..c713e23819f1 100644
--- a/Documentation/devicetree/bindings/nvmem/layouts/kontron,sl28-vpd.yaml
+++ b/Documentation/devicetree/bindings/nvmem/layouts/kontron,sl28-vpd.yaml
@@ -19,12 +19,7 @@ select: false
 
 properties:
   compatible:
-    oneOf:
-      - items:
-          - enum:
-              - kontron,sa67-vpd
-          - const: kontron,sl28-vpd
-      - const: kontron,sl28-vpd
+    const: kontron,sl28-vpd
 
   serial-number:
     type: object
diff --git a/Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml b/Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml
index 839513d4b499..2ab047f2bb69 100644
--- a/Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml
+++ b/Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml
@@ -26,6 +26,7 @@ properties:
           - qcom,ipq8064-qfprom
           - qcom,ipq8074-qfprom
           - qcom,ipq9574-qfprom
+          - qcom,kaanapali-qfprom
           - qcom,msm8226-qfprom
           - qcom,msm8916-qfprom
           - qcom,msm8917-qfprom
diff --git a/Documentation/devicetree/bindings/nvmem/rockchip,otp.yaml b/Documentation/devicetree/bindings/nvmem/rockchip,otp.yaml
index dc89020b0950..7e4d5e1c4ced 100644
--- a/Documentation/devicetree/bindings/nvmem/rockchip,otp.yaml
+++ b/Documentation/devicetree/bindings/nvmem/rockchip,otp.yaml
@@ -14,6 +14,9 @@ properties:
     enum:
       - rockchip,px30-otp
       - rockchip,rk3308-otp
+      - rockchip,rk3528-otp
+      - rockchip,rk3562-otp
+      - rockchip,rk3568-otp
       - rockchip,rk3576-otp
       - rockchip,rk3588-otp
 
@@ -26,19 +29,15 @@ properties:
 
   clock-names:
     minItems: 3
-    items:
-      - const: otp
-      - const: apb_pclk
-      - const: phy
-      - const: arb
+    maxItems: 4
 
   resets:
     minItems: 1
-    maxItems: 3
+    maxItems: 4
 
   reset-names:
     minItems: 1
-    maxItems: 3
+    maxItems: 4
 
 required:
   - compatible
@@ -64,7 +63,10 @@ allOf:
         clocks:
           maxItems: 3
         clock-names:
-          maxItems: 3
+          items:
+            - const: otp
+            - const: apb_pclk
+            - const: phy
         resets:
           maxItems: 1
         reset-names:
@@ -76,13 +78,68 @@ allOf:
         compatible:
           contains:
             enum:
-              - rockchip,rk3576-otp
+              - rockchip,rk3528-otp
     then:
       properties:
         clocks:
           maxItems: 3
         clock-names:
+          items:
+            - const: otp
+            - const: apb_pclk
+            - const: sbpi
+        resets:
+          minItems: 3
+          maxItems: 3
+        reset-names:
+          items:
+            - const: otp
+            - const: apb
+            - const: sbpi
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - rockchip,rk3562-otp
+              - rockchip,rk3568-otp
+    then:
+      properties:
+        clocks:
+          minItems: 4
+          maxItems: 4
+        clock-names:
+          items:
+            - const: otp
+            - const: apb_pclk
+            - const: phy
+            - const: sbpi
+        resets:
+          minItems: 4
+          maxItems: 4
+        reset-names:
+          items:
+            - const: otp
+            - const: apb
+            - const: phy
+            - const: sbpi
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - rockchip,rk3576-otp
+    then:
+      properties:
+        clocks:
           maxItems: 3
+        clock-names:
+          items:
+            - const: otp
+            - const: apb_pclk
+            - const: phy
         resets:
           minItems: 2
           maxItems: 2
@@ -101,10 +158,16 @@ allOf:
       properties:
         clocks:
           minItems: 4
+          maxItems: 4
         clock-names:
-          minItems: 4
+          items:
+            - const: otp
+            - const: apb_pclk
+            - const: phy
+            - const: arb
         resets:
           minItems: 3
+          maxItems: 3
         reset-names:
           items:
             - const: otp