Merge tag 'media/v6.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media

Pull media updates from Mauro Carvalho Chehab:

 - v4l2 core:
     - sub-device framework routing improvements
     - NV12M tiled variants added to v4l2_format_info
     - some fixes at control handler freeing logic
     - fixed H264 SEPARATE_COLOUR_PLANE check

 - new staging driver: Intel IPU7 PCI

 - Rockchip video decoder driver got promoted from staging

 - iris: added HEVC/VP9 encoder/decoder support

 - vsp1: driver has gained Renesas VSPX support

 - uvc:
     - switched to vb2 ioctl helpers
     - added MSXU 1.5 metadata support

 - atomisp: GC0310 sensor driver cleanups in preparation for moving it
   out of staging

 - Lots of cleanup, fixes and improvements

* tag 'media/v6.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (310 commits)
  media: rkvdec: Unstage the driver
  media: rkvdec: Remove TODO file
  media: dt-bindings: rockchip: Add RK3576 Video Decoder bindings
  media: dt-bindings: rockchip: Document RK3588 Video Decoder bindings
  media: amphion: Support dmabuf and v4l2 buffer without binding
  media: verisilicon: postproc: 4K support
  media: v4l2: Add support for NV12M tiled variants to v4l2_format_info()
  media: uvcvideo: Use a count variable for meta_formats instead of 0 terminating
  media: uvcvideo: Auto-set UVC_QUIRK_MSXU_META
  media: uvcvideo: Introduce V4L2_META_FMT_UVC_MSXU_1_5
  media: uvcvideo: Introduce dev->meta_formats
  media: Documentation: Add note about UVCH length field
  media: uvcvideo: Do not mark valid metadata as invalid
  media: uvcvideo: uvc_v4l2_unlocked_ioctl: Invert PM logic
  media: core: export v4l2_translate_cmd
  media: uvcvideo: Turn on the camera if V4L2_EVENT_SUB_FL_SEND_INITIAL
  media: uvcvideo: Remove stream->is_streaming field
  media: uvcvideo: Split uvc_stop_streaming()
  media: uvcvideo: Handle locks in uvc_queue_return_buffers
  media: uvcvideo: Use vb2 ioctl and fop helpers
  ...

16 files changed, 454 insertions, 61 deletions

diff --git a/Documentation/devicetree/bindings/media/cdns,csi2rx.yaml b/Documentation/devicetree/bindings/media/cdns,csi2rx.yaml
index 2008a47c0580..6ed9a5621064 100644
--- a/Documentation/devicetree/bindings/media/cdns,csi2rx.yaml
+++ b/Documentation/devicetree/bindings/media/cdns,csi2rx.yaml
@@ -24,6 +24,14 @@ properties:
   reg:
     maxItems: 1
 
+  interrupts:
+    maxItems: 2
+
+  interrupt-names:
+    items:
+      - const: error_irq
+      - const: irq
+
   clocks:
     items:
       - description: CSI2Rx system clock
diff --git a/Documentation/devicetree/bindings/media/fsl,imx6q-vdoa.yaml b/Documentation/devicetree/bindings/media/fsl,imx6q-vdoa.yaml
new file mode 100644
index 000000000000..511ac0d67a7f
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/fsl,imx6q-vdoa.yaml
@@ -0,0 +1,42 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/fsl,imx6q-vdoa.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale Video Data Order Adapter
+
+description:
+  The Video Data Order Adapter (VDOA) is present on the i.MX6q. Its sole purpose
+  is to reorder video data from the macroblock tiled order produced by the CODA
+  960 VPU to the conventional raster-scan order for scanout.
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>
+
+properties:
+  compatible:
+    const: "fsl,imx6q-vdoa"
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/clock/imx6qdl-clock.h>
+
+    vdoa@21e4000 {
+        compatible = "fsl,imx6q-vdoa";
+        reg = <0x021e4000 0x4000>;
+        interrupts = <0 18 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&clks IMX6QDL_CLK_VDOA>;
+    };
diff --git a/Documentation/devicetree/bindings/media/fsl,imx8qm-isi.yaml b/Documentation/devicetree/bindings/media/fsl,imx8qm-isi.yaml
new file mode 100644
index 000000000000..93f527e223af
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/fsl,imx8qm-isi.yaml
@@ -0,0 +1,117 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/fsl,imx8qm-isi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: i.MX8QM Image Sensing Interface
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>
+
+description:
+  The Image Sensing Interface (ISI) combines image processing pipelines with
+  DMA engines to process and capture frames originating from a variety of
+  sources. The inputs to the ISI go through Pixel Link interfaces, and their
+  number and nature is SoC-dependent. They cover both capture interfaces (MIPI
+  CSI-2 RX, HDMI RX, ...) and display engine outputs for writeback support.
+
+properties:
+  compatible:
+    enum:
+      - fsl,imx8qm-isi
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 8
+
+  clock-names:
+    items:
+      - const: per0
+      - const: per1
+      - const: per2
+      - const: per3
+      - const: per4
+      - const: per5
+      - const: per6
+      - const: per7
+
+  interrupts:
+    maxItems: 8
+
+  power-domains:
+    maxItems: 8
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    properties:
+      port@2:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: MIPI CSI-2 RX 0
+      port@3:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: MIPI CSI-2 RX 1
+      port@4:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: HDMI RX
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - interrupts
+  - power-domains
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/clock/imx8-clock.h>
+    #include <dt-bindings/clock/imx8-lpcg.h>
+    #include <dt-bindings/firmware/imx/rsrc.h>
+
+    image-controller@58100000 {
+        compatible = "fsl,imx8qm-isi";
+        reg = <0x58100000 0x80000>;
+        interrupts = <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 301 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 302 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&pdma0_lpcg IMX_LPCG_CLK_0>,
+                 <&pdma1_lpcg IMX_LPCG_CLK_0>,
+                 <&pdma2_lpcg IMX_LPCG_CLK_0>,
+                 <&pdma3_lpcg IMX_LPCG_CLK_0>,
+                 <&pdma4_lpcg IMX_LPCG_CLK_0>,
+                 <&pdma5_lpcg IMX_LPCG_CLK_0>,
+                 <&pdma6_lpcg IMX_LPCG_CLK_0>,
+                 <&pdma7_lpcg IMX_LPCG_CLK_0>;
+        clock-names = "per0", "per1", "per2", "per3",
+                      "per4", "per5", "per6", "per7";
+        power-domains = <&pd IMX_SC_R_ISI_CH0>, <&pd IMX_SC_R_ISI_CH1>,
+                        <&pd IMX_SC_R_ISI_CH2>, <&pd IMX_SC_R_ISI_CH3>,
+                        <&pd IMX_SC_R_ISI_CH4>, <&pd IMX_SC_R_ISI_CH5>,
+                        <&pd IMX_SC_R_ISI_CH6>, <&pd IMX_SC_R_ISI_CH7>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@2 {
+                reg = <2>;
+                endpoint {
+                    remote-endpoint = <&mipi_csi0_out>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/media/fsl,imx8qxp-isi.yaml b/Documentation/devicetree/bindings/media/fsl,imx8qxp-isi.yaml
new file mode 100644
index 000000000000..bb41996bd2e3
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/fsl,imx8qxp-isi.yaml
@@ -0,0 +1,106 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/fsl,imx8qxp-isi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: i.MX8QXP Image Sensing Interface
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>
+
+description:
+  The Image Sensing Interface (ISI) combines image processing pipelines with
+  DMA engines to process and capture frames originating from a variety of
+  sources. The inputs to the ISI go through Pixel Link interfaces, and their
+  number and nature is SoC-dependent. They cover both capture interfaces (MIPI
+  CSI-2 RX, HDMI RX, ...) and display engine outputs for writeback support.
+
+properties:
+  compatible:
+    enum:
+      - fsl,imx8qxp-isi
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 6
+
+  clock-names:
+    items:
+      - const: per0
+      - const: per1
+      - const: per2
+      - const: per3
+      - const: per4
+      - const: per5
+
+  interrupts:
+    maxItems: 6
+
+  power-domains:
+    maxItems: 6
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    properties:
+      port@2:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: MIPI CSI-2 RX 0
+      port@6:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: CSI-2 Parallel RX
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - interrupts
+  - power-domains
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/clock/imx8-clock.h>
+    #include <dt-bindings/clock/imx8-lpcg.h>
+    #include <dt-bindings/firmware/imx/rsrc.h>
+
+    image-controller@58100000 {
+        compatible = "fsl,imx8qxp-isi";
+        reg = <0x58100000 0x60000>;
+        interrupts = <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 301 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 302 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&pdma0_lpcg IMX_LPCG_CLK_0>,
+                 <&pdma1_lpcg IMX_LPCG_CLK_0>,
+                 <&pdma2_lpcg IMX_LPCG_CLK_0>,
+                 <&pdma3_lpcg IMX_LPCG_CLK_0>,
+                 <&pdma4_lpcg IMX_LPCG_CLK_0>,
+                 <&pdma5_lpcg IMX_LPCG_CLK_0>;
+        clock-names = "per0", "per1", "per2", "per3", "per4", "per5";
+        power-domains = <&pd IMX_SC_R_ISI_CH0>, <&pd IMX_SC_R_ISI_CH1>,
+                        <&pd IMX_SC_R_ISI_CH2>, <&pd IMX_SC_R_ISI_CH3>,
+                        <&pd IMX_SC_R_ISI_CH4>, <&pd IMX_SC_R_ISI_CH5>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@2 {
+                reg = <2>;
+                endpoint {
+                    remote-endpoint = <&mipi_csi0_out>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/media/fsl-vdoa.txt b/Documentation/devicetree/bindings/media/fsl-vdoa.txt
deleted file mode 100644
index 6c5628530bb7..000000000000
--- a/Documentation/devicetree/bindings/media/fsl-vdoa.txt
+++ /dev/null
@@ -1,21 +0,0 @@
-Freescale Video Data Order Adapter
-==================================
-
-The Video Data Order Adapter (VDOA) is present on the i.MX6q. Its sole purpose
-is to reorder video data from the macroblock tiled order produced by the CODA
-960 VPU to the conventional raster-scan order for scanout.
-
-Required properties:
-- compatible: must be "fsl,imx6q-vdoa"
-- reg: the register base and size for the device registers
-- interrupts: the VDOA interrupt
-- clocks: the vdoa clock
-
-Example:
-
-vdoa@21e4000 {
-        compatible = "fsl,imx6q-vdoa";
-        reg = <0x021e4000 0x4000>;
-        interrupts = <0 18 IRQ_TYPE_LEVEL_HIGH>;
-        clocks = <&clks IMX6QDL_CLK_VDOA>;
-};
diff --git a/Documentation/devicetree/bindings/media/i2c/mipi-ccs.yaml b/Documentation/devicetree/bindings/media/i2c/mipi-ccs.yaml
index f8ace8cbccdb..bc664a016396 100644
--- a/Documentation/devicetree/bindings/media/i2c/mipi-ccs.yaml
+++ b/Documentation/devicetree/bindings/media/i2c/mipi-ccs.yaml
@@ -23,6 +23,9 @@ description:
   More detailed documentation can be found in
   Documentation/devicetree/bindings/media/video-interfaces.txt .
 
+allOf:
+  - $ref: /schemas/media/video-interface-devices.yaml#
+
 properties:
   compatible:
     oneOf:
@@ -58,16 +61,10 @@ properties:
       documentation.
     maxItems: 1
 
-  flash-leds:
-    description: Flash LED phandles. See ../video-interfaces.txt for details.
-
-  lens-focus:
-    description: Lens focus controller phandles. See ../video-interfaces.txt
-      for details.
+  flash-leds: true
+  lens-focus: true
 
   rotation:
-    description: Rotation of the sensor.  See ../video-interfaces.txt for
-      details.
     enum: [ 0, 180 ]
 
   port:
diff --git a/Documentation/devicetree/bindings/media/i2c/onnn,mt9m114.yaml b/Documentation/devicetree/bindings/media/i2c/onnn,mt9m114.yaml
index f6b87892068a..a89f740214f7 100644
--- a/Documentation/devicetree/bindings/media/i2c/onnn,mt9m114.yaml
+++ b/Documentation/devicetree/bindings/media/i2c/onnn,mt9m114.yaml
@@ -70,6 +70,15 @@ properties:
           - bus-type
           - link-frequencies
 
+  slew-rate:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Slew rate ot the output pads DOUT[7:0], LINE_VALID, FRAME_VALID and
+      PIXCLK. Higher values imply steeper voltage-flanks on the pads.
+    minimum: 0
+    maximum: 7
+    default: 7
+
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov8858.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov8858.yaml
index a65f921ec0fd..491f2931e6bc 100644
--- a/Documentation/devicetree/bindings/media/i2c/ovti,ov8858.yaml
+++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov8858.yaml
@@ -15,6 +15,8 @@ description: |
   controlled through an I2C-compatible SCCB bus. The sensor transmits images
   on a MIPI CSI-2 output interface with up to 4 data lanes.
 
+$ref: /schemas/media/video-interface-devices.yaml#
+
 properties:
   compatible:
     const: ovti,ov8858
@@ -69,7 +71,7 @@ required:
   - clocks
   - port
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/media/i2c/sony,imx214.yaml b/Documentation/devicetree/bindings/media/i2c/sony,imx214.yaml
index 0162eec8ca99..aea99ebf8e9e 100644
--- a/Documentation/devicetree/bindings/media/i2c/sony,imx214.yaml
+++ b/Documentation/devicetree/bindings/media/i2c/sony,imx214.yaml
@@ -33,20 +33,21 @@ properties:
 
   clock-frequency:
     description: Frequency of the xclk clock in Hz.
+    deprecated: true
 
   enable-gpios:
     description: GPIO descriptor for the enable pin.
     maxItems: 1
 
-  vdddo-supply:
-    description: Chip digital IO regulator (1.8V).
-
   vdda-supply:
     description: Chip analog regulator (2.7V).
 
   vddd-supply:
     description: Chip digital core regulator (1.12V).
 
+  vdddo-supply:
+    description: Chip digital IO regulator (1.8V).
+
   flash-leds: true
   lens-focus: true
 
@@ -84,11 +85,10 @@ required:
   - compatible
   - reg
   - clocks
-  - clock-frequency
   - enable-gpios
-  - vdddo-supply
   - vdda-supply
   - vddd-supply
+  - vdddo-supply
   - port
 
 unevaluatedProperties: false
@@ -104,22 +104,25 @@ examples:
         camera-sensor@1a {
             compatible = "sony,imx214";
             reg = <0x1a>;
-            vdddo-supply = <&pm8994_lvs1>;
-            vddd-supply = <&camera_vddd_1v12>;
+
+            clocks = <&camera_clk>;
+            assigned-clocks = <&camera_clk>;
+            assigned-clock-rates = <24000000>;
+
+            enable-gpios = <&msmgpio 25 GPIO_ACTIVE_HIGH>;
+
             vdda-supply = <&pm8994_l17>;
+            vddd-supply = <&camera_vddd_1v12>;
+            vdddo-supply = <&pm8994_lvs1>;
+
             lens-focus = <&ad5820>;
-            enable-gpios = <&msmgpio 25 GPIO_ACTIVE_HIGH>;
-            clocks = <&camera_clk>;
-            clock-frequency = <24000000>;
 
             port {
                 imx214_ep: endpoint {
                     data-lanes = <1 2 3 4>;
-                    link-frequencies = /bits/ 64 <480000000>;
+                    link-frequencies = /bits/ 64 <600000000>;
                     remote-endpoint = <&csiphy0_ep>;
                 };
             };
         };
     };
-
-...
diff --git a/Documentation/devicetree/bindings/media/i2c/sony,imx258.yaml b/Documentation/devicetree/bindings/media/i2c/sony,imx258.yaml
index 975c1d77c8e5..421b935b52bc 100644
--- a/Documentation/devicetree/bindings/media/i2c/sony,imx258.yaml
+++ b/Documentation/devicetree/bindings/media/i2c/sony,imx258.yaml
@@ -18,6 +18,8 @@ description: |-
   The camera module does not expose the model through registers, so the
   exact model needs to be specified.
 
+$ref: /schemas/media/video-interface-devices.yaml#
+
 properties:
   compatible:
     enum:
@@ -81,7 +83,7 @@ required:
   - reg
   - port
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/media/nxp,imx8-jpeg.yaml b/Documentation/devicetree/bindings/media/nxp,imx8-jpeg.yaml
index 2be30c5fdc83..4cba42ba7cf7 100644
--- a/Documentation/devicetree/bindings/media/nxp,imx8-jpeg.yaml
+++ b/Documentation/devicetree/bindings/media/nxp,imx8-jpeg.yaml
@@ -22,10 +22,14 @@ properties:
             - nxp,imx8qxp-jpgdec
             - nxp,imx8qxp-jpgenc
       - items:
-          - const: nxp,imx8qm-jpgdec
+          - enum:
+              - nxp,imx8qm-jpgdec
+              - nxp,imx95-jpgdec
           - const: nxp,imx8qxp-jpgdec
       - items:
-          - const: nxp,imx8qm-jpgenc
+          - enum:
+              - nxp,imx8qm-jpgenc
+              - nxp,imx95-jpgenc
           - const: nxp,imx8qxp-jpgenc
 
   reg:
@@ -48,7 +52,7 @@ properties:
     description:
       List of phandle and PM domain specifier as documented in
       Documentation/devicetree/bindings/power/power_domain.txt
-    minItems: 2               # Wrapper and 1 slot
+    minItems: 1               # Wrapper and all slots
     maxItems: 5               # Wrapper and 4 slots
 
 required:
@@ -58,6 +62,24 @@ required:
   - interrupts
   - power-domains
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - nxp,imx95-jpgenc
+              - nxp,imx95-jpgdec
+    then:
+      properties:
+        power-domains:
+          maxItems: 1
+    else:
+      properties:
+        power-domains:
+          minItems: 2        # Wrapper and 1 slot
+
+
 additionalProperties: false
 
 examples:
diff --git a/Documentation/devicetree/bindings/media/nxp,imx8mq-mipi-csi2.yaml b/Documentation/devicetree/bindings/media/nxp,imx8mq-mipi-csi2.yaml
index 2a14e3b0e004..3389bab266a9 100644
--- a/Documentation/devicetree/bindings/media/nxp,imx8mq-mipi-csi2.yaml
+++ b/Documentation/devicetree/bindings/media/nxp,imx8mq-mipi-csi2.yaml
@@ -16,11 +16,19 @@ description: |-
 
 properties:
   compatible:
-    enum:
-      - fsl,imx8mq-mipi-csi2
+    oneOf:
+      - enum:
+          - fsl,imx8mq-mipi-csi2
+          - fsl,imx8qxp-mipi-csi2
+      - items:
+          - const: fsl,imx8qm-mipi-csi2
+          - const: fsl,imx8qxp-mipi-csi2
 
   reg:
-    maxItems: 1
+    items:
+      - description: MIPI CSI-2 RX host controller register.
+      - description: MIPI CSI-2 control and status register (csr).
+    minItems: 1
 
   clocks:
     items:
@@ -46,6 +54,7 @@ properties:
       - description: CORE_RESET reset register bit definition
       - description: PHY_REF_RESET reset register bit definition
       - description: ESC_RESET reset register bit definition
+    minItems: 1
 
   fsl,mipi-phy-gpr:
     description: |
@@ -113,9 +122,30 @@ required:
   - clock-names
   - power-domains
   - resets
-  - fsl,mipi-phy-gpr
   - ports
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - fsl,imx8qxp-mipi-csi2
+    then:
+      properties:
+        reg:
+          minItems: 2
+        resets:
+          maxItems: 1
+    else:
+      properties:
+        reg:
+          maxItems: 1
+        resets:
+          minItems: 3
+      required:
+        - fsl,mipi-phy-gpr
+
 additionalProperties: false
 
 examples:
diff --git a/Documentation/devicetree/bindings/media/qcom,x1e80100-camss.yaml b/Documentation/devicetree/bindings/media/qcom,x1e80100-camss.yaml
index 113565cf2a99..b075341caafc 100644
--- a/Documentation/devicetree/bindings/media/qcom,x1e80100-camss.yaml
+++ b/Documentation/devicetree/bindings/media/qcom,x1e80100-camss.yaml
@@ -133,7 +133,7 @@ properties:
       CSI input ports.
 
     patternProperties:
-      "^port@[0-3]+$":
+      "^port@[0-3]$":
         $ref: /schemas/graph.yaml#/$defs/port-base
         unevaluatedProperties: false
 
@@ -146,15 +146,16 @@ properties:
             unevaluatedProperties: false
 
             properties:
-              clock-lanes:
-                maxItems: 1
-
               data-lanes:
                 minItems: 1
                 maxItems: 4
 
+              bus-type:
+                enum:
+                  - 1 # MEDIA_BUS_TYPE_CSI2_CPHY
+                  - 4 # MEDIA_BUS_TYPE_CSI2_DPHY
+
             required:
-              - clock-lanes
               - data-lanes
 
 required:
@@ -189,7 +190,7 @@ examples:
         #address-cells = <2>;
         #size-cells = <2>;
 
-        camss: isp@acb6000 {
+        camss: isp@acb7000 {
             compatible = "qcom,x1e80100-camss";
 
             reg = <0 0x0acb7000 0 0x2000>,
@@ -357,7 +358,6 @@ examples:
                 port@0 {
                     reg = <0>;
                     csiphy_ep0: endpoint {
-                        clock-lanes = <7>;
                         data-lanes = <0 1>;
                         remote-endpoint = <&sensor_ep>;
                     };
diff --git a/Documentation/devicetree/bindings/media/renesas,fcp.yaml b/Documentation/devicetree/bindings/media/renesas,fcp.yaml
index 7bf1266223e8..cf92dfe69637 100644
--- a/Documentation/devicetree/bindings/media/renesas,fcp.yaml
+++ b/Documentation/devicetree/bindings/media/renesas,fcp.yaml
@@ -30,6 +30,7 @@ properties:
               - renesas,r9a07g043u-fcpvd # RZ/G2UL
               - renesas,r9a07g044-fcpvd # RZ/G2{L,LC}
               - renesas,r9a07g054-fcpvd # RZ/V2L
+              - renesas,r9a09g056-fcpvd # RZ/V2N
               - renesas,r9a09g057-fcpvd # RZ/V2H(P)
           - const: renesas,fcpv         # Generic FCP for VSP fallback
 
diff --git a/Documentation/devicetree/bindings/media/renesas,vsp1.yaml b/Documentation/devicetree/bindings/media/renesas,vsp1.yaml
index fcf7219b1f40..07a97dd87a5b 100644
--- a/Documentation/devicetree/bindings/media/renesas,vsp1.yaml
+++ b/Documentation/devicetree/bindings/media/renesas,vsp1.yaml
@@ -25,6 +25,7 @@ properties:
           - enum:
               - renesas,r9a07g043u-vsp2   # RZ/G2UL
               - renesas,r9a07g054-vsp2    # RZ/V2L
+              - renesas,r9a09g056-vsp2    # RZ/V2N
               - renesas,r9a09g057-vsp2    # RZ/V2H(P)
           - const: renesas,r9a07g044-vsp2 # RZ/G2L fallback
 
diff --git a/Documentation/devicetree/bindings/media/rockchip,vdec.yaml b/Documentation/devicetree/bindings/media/rockchip,vdec.yaml
index 08b02ec16755..96b6c8938768 100644
--- a/Documentation/devicetree/bindings/media/rockchip,vdec.yaml
+++ b/Documentation/devicetree/bindings/media/rockchip,vdec.yaml
@@ -10,13 +10,15 @@ maintainers:
   - Heiko Stuebner <heiko@sntech.de>
 
 description: |-
-  The Rockchip rk3399 has a stateless Video Decoder that can decodes H.264,
-  HEVC an VP9 streams.
+  Rockchip SoCs have variants of the same stateless Video Decoder that can
+  decodes H.264, HEVC, VP9 and AV1 streams, depending on the variant.
 
 properties:
   compatible:
     oneOf:
       - const: rockchip,rk3399-vdec
+      - const: rockchip,rk3576-vdec
+      - const: rockchip,rk3588-vdec
       - items:
           - enum:
               - rockchip,rk3228-vdec
@@ -24,35 +26,72 @@ properties:
           - const: rockchip,rk3399-vdec
 
   reg:
-    maxItems: 1
+    minItems: 1
+    items:
+      - description: The function configuration registers base
+      - description: The link table configuration registers base
+      - description: The cache configuration registers base
+
+  reg-names:
+    items:
+      - const: function
+      - const: link
+      - const: cache
 
   interrupts:
     maxItems: 1
 
   clocks:
+    minItems: 4
     items:
       - description: The Video Decoder AXI interface clock
       - description: The Video Decoder AHB interface clock
       - description: The Video Decoded CABAC clock
       - description: The Video Decoder core clock
+      - description: The Video decoder HEVC CABAC clock
 
   clock-names:
+    minItems: 4
     items:
       - const: axi
       - const: ahb
       - const: cabac
       - const: core
+      - const: hevc_cabac
 
   assigned-clocks: true
 
   assigned-clock-rates: true
 
+  resets:
+    items:
+      - description: The Video Decoder AXI interface reset
+      - description: The Video Decoder AHB interface reset
+      - description: The Video Decoded CABAC reset
+      - description: The Video Decoder core reset
+      - description: The Video decoder HEVC CABAC reset
+
+  reset-names:
+    items:
+      - const: axi
+      - const: ahb
+      - const: cabac
+      - const: core
+      - const: hevc_cabac
+
   power-domains:
     maxItems: 1
 
   iommus:
     maxItems: 1
 
+  sram:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: |
+      phandle to a reserved on-chip SRAM regions.
+      Some SoCs, like rk3588 provide on-chip SRAM to store temporary
+      buffers during decoding.
+
 required:
   - compatible
   - reg
@@ -61,6 +100,41 @@ required:
   - clock-names
   - power-domains
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - rockchip,rk3576-vdec
+              - rockchip,rk3588-vdec
+    then:
+      properties:
+        reg:
+          minItems: 3
+        reg-names:
+          minItems: 3
+        clocks:
+          minItems: 5
+        clock-names:
+          minItems: 5
+        resets:
+          minItems: 5
+        reset-names:
+          minItems: 5
+    else:
+      properties:
+        reg:
+          maxItems: 1
+        reg-names: false
+        clocks:
+          maxItems: 4
+        clock-names:
+          maxItems: 4
+        resets: false
+        reset-names: false
+        sram: false
+
 additionalProperties: false
 
 examples: