Merge tag 'for-v7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply

Pull power supply and reset updates from Sebastian Reichel:
 "Power-supply core:
   - Add PbAc, NiZn, RAM, and ZnAr battery chemistry types
   - Create LED triggers based on properties instead of device type
   - Provide power_supply_get_system_batteries() for usage with USB-C
   - Add registration init callback for race-free device setup

  Power-supply drivers:
   - new TI BQ25630 charger driver
   - new SG Micro sgm41542 charger driver
   - bq257xx: Add support for BQ25792
   - max8903: add DC and USB input current-limit controls
   - max17042_battery: Initialize MAX17055 from battery info
   - sbs-battery: map newly introduced battery chemistries
   - drop extra error messages for IRQ request failures
   - lot's of driver removal race condition fixes
   - misc small cleanups and fixes

  Reset drivers:
   - add MCF5441x RCM power-on reason driver
   - misc small cleanups and fixes"

* tag 'for-v7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (115 commits)
  power: supply: bq27xxx: bq27z561: fix invalid AverageEnergy address
  power: supply: bq27xxx: bq28z610: fix invalid AverageEnergy address
  power: supply: bq27xxx: bq27520g4: fix REG_TTES address
  power: supply: max17040: synchronize work cancellation on suspend
  power: supply: lp8727: fix use-after-free in lp8727_release_irq()
  power: supply: bq256xx: drain usb_work before freeing the charger
  power: supply: qcom_battmgr: fix battery chemistry strncmp length
  power: supply: bd99954: Drop bad register fields
  power: supply: bd71828: Do not hide errors
  power: supply: bd71828: Drop duplicate power-supply property
  power: supply: bd71828: Fix current direction
  power: supply: bd71815: Fix temperature reading
  power: supply: add stubs for notifier registration helpers
  power: supply: ucs1002: fix use-after-free on remove
  power: supply: lp8788-charger: fix use-after-free on remove
  power: supply: ab8500_fg: fix use-after-free on remove
  power: supply: bq24257: fix use-after-free on remove
  power: supply: qcom_battmgr: fix use-after-free
  power: supply: max17040: drop incorrect I2C functionality check
  power: supply: charger-manager: register regulators before exposing sysfs
  ...

5 files changed, 219 insertions, 9 deletions

diff --git a/Documentation/devicetree/bindings/power/reset/qcom,pon.yaml b/Documentation/devicetree/bindings/power/reset/qcom,pon.yaml
index 979a377cb4ff..3d07aa004eb6 100644
--- a/Documentation/devicetree/bindings/power/reset/qcom,pon.yaml
+++ b/Documentation/devicetree/bindings/power/reset/qcom,pon.yaml
@@ -17,12 +17,16 @@ description: |
 
 properties:
   compatible:
-    enum:
-      - qcom,pm8916-pon
-      - qcom,pm8941-pon
-      - qcom,pms405-pon
-      - qcom,pm8998-pon
-      - qcom,pmk8350-pon
+    oneOf:
+      - enum:
+          - qcom,pm8916-pon
+          - qcom,pm8941-pon
+          - qcom,pms405-pon
+          - qcom,pm8998-pon
+          - qcom,pmk8350-pon
+      - items:
+          - const: qcom,pmm8654au-pon
+          - const: qcom,pmk8350-pon
 
   reg:
     description: |
@@ -79,6 +83,10 @@ allOf:
         reg-names:
           items:
             - const: pon
+      patternProperties:
+        # Negative look-ahead to disallow unsupported modes. The '$' has to be
+        # part of lookahead group to work, instead of trailing outside of ().
+        "^mode-(?!(bootloader$|recovery$))": false
     else:
       patternProperties:
         "^mode-.*$": false
diff --git a/Documentation/devicetree/bindings/power/supply/maxim,max17042.yaml b/Documentation/devicetree/bindings/power/supply/maxim,max17042.yaml
index 8687009b4057..2d9bad1c658c 100644
--- a/Documentation/devicetree/bindings/power/supply/maxim,max17042.yaml
+++ b/Documentation/devicetree/bindings/power/supply/maxim,max17042.yaml
@@ -67,13 +67,11 @@ properties:
       Voltage threshold to report battery as over voltage (in mV).
       Default is not to report over-voltage events.
 
-  power-supplies: true
-
 required:
   - compatible
   - reg
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/power/supply/maxim,max8903.yaml b/Documentation/devicetree/bindings/power/supply/maxim,max8903.yaml
index 86af38378999..b3d8c0a5f214 100644
--- a/Documentation/devicetree/bindings/power/supply/maxim,max8903.yaml
+++ b/Documentation/devicetree/bindings/power/supply/maxim,max8903.yaml
@@ -44,9 +44,40 @@ properties:
     maxItems: 1
     description: USB suspend pin (active high, output)
 
+  dc-current-limit-gpios:
+    minItems: 1
+    maxItems: 4
+    description:
+      GPIOs controlling DC input current limit via resistor mux.
+      Used with dc-current-limit-mapping to select charging current.
+
+  dc-current-limit-mapping:
+    $ref: /schemas/types.yaml#/definitions/uint32-matrix
+    minItems: 2
+    maxItems: 16
+    description: |
+      Array of (current_microamps, gpio_bit_pattern) pairs defining available
+      DC current limits. The gpio_bit_pattern is applied to dc-current-limit-gpios
+      to select that current level.
+    items:
+      items:
+        - description: Current limit in microamps
+        - description: GPIO bit pattern value
+
+  usb-current-limit-gpios:
+    maxItems: 1
+    description:
+      GPIO driving the MAX8903 IUSB pin. IUSB is a silicon-fixed
+      two-state input - low selects 100 mA, high selects 500 mA.
+      Only the GPIO mapping is board-specific.
+
 required:
   - compatible
 
+dependentRequired:
+  dc-current-limit-gpios: [dc-current-limit-mapping]
+  dc-current-limit-mapping: [dc-current-limit-gpios]
+
 anyOf:
   - required:
       - dok-gpios
@@ -65,3 +96,25 @@ examples:
       chg-gpios = <&gpio3 15 GPIO_ACTIVE_LOW>;
       cen-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>;
     };
+  - |
+    /* Example with DC and USB current limit control */
+    #include <dt-bindings/gpio/gpio.h>
+    charger {
+      compatible = "maxim,max8903";
+      dok-gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
+      flt-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
+      chg-gpios = <&gpio3 15 GPIO_ACTIVE_LOW>;
+      cen-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>;
+      dcm-gpios = <&gpio2 6 GPIO_ACTIVE_HIGH>;
+
+      /* DC input current limit via IDC resistor mux */
+      dc-current-limit-gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>,
+                               <&gpio1 1 GPIO_ACTIVE_HIGH>;
+      dc-current-limit-mapping = <750000 0>,  /* GPIO[1:0]=0b00 */
+                                 <900000 1>,  /* GPIO[1:0]=0b01 */
+                                 <1400000 3>, /* GPIO[1:0]=0b11 */
+                                 <2000000 2>; /* GPIO[1:0]=0b10 */
+
+      /* USB current limit: IUSB pin, 100 mA (low) / 500 mA (high) */
+      usb-current-limit-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+    };
diff --git a/Documentation/devicetree/bindings/power/supply/sgmicro,sgm41542.yaml b/Documentation/devicetree/bindings/power/supply/sgmicro,sgm41542.yaml
new file mode 100644
index 000000000000..af80fe528505
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/sgmicro,sgm41542.yaml
@@ -0,0 +1,96 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/sgmicro,sgm41542.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: SGM41542 Battery Charger
+
+description:
+  The SGMicro SGM41542 is a single cell battery charger/boost controller.
+
+maintainers:
+  - Chris Morgan <macromorgan@hotmail.com>
+  - Xu Shengfei <xsf@rock-chips.com>
+
+allOf:
+  - $ref: power-supply.yaml#
+
+properties:
+  compatible:
+    const: sgmicro,sgm41542
+
+  input-current-limit-microamp:
+    default: 2400000
+    minimum: 100000
+    maximum: 3800000
+
+  input-voltage-limit-microvolt:
+    default: 4500000
+    minimum: 3900000
+    maximum: 12000000
+
+  interrupts:
+    maxItems: 1
+
+  monitored-battery:
+    description: |
+        The charger uses the following battery properties
+        constant-charge-current-max-microamp (default 2040000)
+        constant-charge-voltage-max-microvolt (default 4208000)
+        charge-term-current-microamp (default 180000)
+        precharge-current-microamp (default 180000)
+
+  reg:
+    maxItems: 1
+
+  regulators:
+    type: object
+    properties:
+      otg-vbus:
+        type: object
+        description: OTG boost regulator
+        $ref: /schemas/regulator/regulator.yaml
+        unevaluatedProperties: false
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    battery: battery {
+      compatible = "simple-battery";
+      constant-charge-current-max-microamp = <10000000>;
+      constant-charge-voltage-max-microvolt = <4350000>;
+      precharge-current-microamp = <180000>;
+      charge-term-current-microamp = <300000>;
+    };
+
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      charger@3b {
+        compatible = "sgmicro,sgm41542";
+        reg = <0x3b>;
+        input-current-limit-microamp = <3000000>;
+        input-voltage-limit-microvolt = <4500000>;
+        interrupt-parent = <&gpio0>;
+        interrupts = <26 IRQ_TYPE_EDGE_FALLING>;
+        monitored-battery = <&battery>;
+
+        regulators {
+          otg-vbus {
+            regulator-max-microvolt = <5000000>;
+            regulator-min-microvolt = <5000000>;
+          };
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/power/supply/ti,bq25630.yaml b/Documentation/devicetree/bindings/power/supply/ti,bq25630.yaml
new file mode 100644
index 000000000000..3f2904731c5a
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/ti,bq25630.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/ti,bq25630.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI BQ25630 battery charger
+
+maintainers:
+  - Waqar Hameed <waqar.hameed@axis.com>
+
+description: |
+  I2C controlled single cell Li-ion and Li-polymer 5A buck charger.
+  Datasheet: https://www.ti.com/lit/gpn/bq25630
+
+allOf:
+  - $ref: power-supply.yaml#
+
+properties:
+  compatible:
+    const: ti,bq25630
+
+  reg:
+    const: 0x6b
+
+  interrupts:
+    maxItems: 1
+    description:
+      Device sends active low 256 µs pulse. Type should therefore be
+      IRQ_TYPE_EDGE_FALLING.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - monitored-battery
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        charger@6b {
+            compatible = "ti,bq25630";
+            reg = <0x6b>;
+            interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
+            monitored-battery = <&bat>;
+        };
+    };
+...