Merge tag 'char-misc-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc/IIO/whatever driver subsystem updates from Greg KH:
 "Here is the 'big and hairy' char/misc/iio and other small driver
  subsystem updates for 6.13-rc1.

  Loads of things in here, and even a fun merge conflict!

   - rust misc driver bindings and other rust changes to make misc
     drivers actually possible.

     I think this is the tipping point, expect to see way more rust
     drivers going forward now that these bindings are present. Next
     merge window hopefully we will have pci and platform drivers
     working, which will fully enable almost all driver subsystems to
     start accepting (or at least getting) rust drivers.

     This is the end result of a lot of work from a lot of people,
     congrats to all of them for getting this far, you've proved many of
     us wrong in the best way possible, working code :)

   - IIO driver updates, too many to list individually, that subsystem
     keeps growing and growing...

   - Interconnect driver updates

   - nvmem driver updates

   - pwm driver updates

   - platform_driver::remove() fixups, loads of them

   - counter driver updates

   - misc driver updates (keba?)

   - binder driver updates and fixes

   - loads of other small char/misc/etc driver updates and additions,
     full details in the shortlog.

  All of these have been in linux-next for a while, with no other
  reported issues other than that merge conflict"

* tag 'char-misc-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (401 commits)
  mei: vsc: Fix typo "maintstepping" -> "mainstepping"
  firmware: Switch back to struct platform_driver::remove()
  misc: isl29020: Fix the wrong format specifier
  scripts/tags.sh: Don't tag usages of DEFINE_MUTEX
  fpga: Switch back to struct platform_driver::remove()
  mei: vsc: Improve error logging in vsc_identify_silicon()
  mei: vsc: Do not re-enable interrupt from vsc_tp_reset()
  dt-bindings: spmi: qcom,x1e80100-spmi-pmic-arb: Add SAR2130P compatible
  dt-bindings: spmi: spmi-mtk-pmif: Add compatible for MT8188
  spmi: pmic-arb: fix return path in for_each_available_child_of_node()
  iio: Move __private marking before struct element priv in struct iio_dev
  docs: iio: ad7380: add adaq4370-4 and adaq4380-4
  iio: adc: ad7380: add support for adaq4370-4 and adaq4380-4
  iio: adc: ad7380: use local dev variable to shorten long lines
  iio: adc: ad7380: fix oversampling formula
  dt-bindings: iio: adc: ad7380: add adaq4370-4 and adaq4380-4 compatible parts
  bus: mhi: host: pci_generic: Use pcim_iomap_region() to request and map MHI BAR
  bus: mhi: host: Switch trace_mhi_gen_tre fields to native endian
  misc: atmel-ssc: Use of_property_present() for non-boolean properties
  misc: keba: Add hardware dependency
  ...

38 files changed, 1803 insertions, 227 deletions

diff --git a/Documentation/devicetree/bindings/iio/adc/adc.yaml b/Documentation/devicetree/bindings/iio/adc/adc.yaml
index 8e7835cf36fd..b9bc02b5b07a 100644
--- a/Documentation/devicetree/bindings/iio/adc/adc.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/adc.yaml
@@ -37,6 +37,10 @@ properties:
       to both the positive and negative inputs of a differential ADC.
       The first value specifies the positive input pin, the second
       specifies the negative input pin.
+      There are also some ADCs, where the differential channel has dedicated
+      positive and negative inputs which can be used to measure differential
+      voltage levels. For those setups, this property can be configured with
+      the 'reg' property for both inputs (i.e. diff-channels = <reg reg>).
 
   single-channel:
     $ref: /schemas/types.yaml#/definitions/uint32
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7173.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7173.yaml
index 17c5d39cc2c1..ad15cf9bc2ff 100644
--- a/Documentation/devicetree/bindings/iio/adc/adi,ad7173.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7173.yaml
@@ -28,6 +28,7 @@ description: |
   Datasheets for supported chips:
     https://www.analog.com/media/en/technical-documentation/data-sheets/AD4111.pdf
     https://www.analog.com/media/en/technical-documentation/data-sheets/AD4112.pdf
+    <AD4113: not released yet>
     https://www.analog.com/media/en/technical-documentation/data-sheets/AD4114.pdf
     https://www.analog.com/media/en/technical-documentation/data-sheets/AD4115.pdf
     https://www.analog.com/media/en/technical-documentation/data-sheets/AD4116.pdf
@@ -44,6 +45,7 @@ properties:
     enum:
       - adi,ad4111
       - adi,ad4112
+      - adi,ad4113
       - adi,ad4114
       - adi,ad4115
       - adi,ad4116
@@ -331,6 +333,7 @@ allOf:
             enum:
               - adi,ad4111
               - adi,ad4112
+              - adi,ad4113
               - adi,ad4114
               - adi,ad4115
               - adi,ad4116
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7380.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7380.yaml
index 0065d6508824..ada08005b3cd 100644
--- a/Documentation/devicetree/bindings/iio/adc/adi,ad7380.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7380.yaml
@@ -25,6 +25,8 @@ description: |
   * https://www.analog.com/en/products/ad7386-4.html
   * https://www.analog.com/en/products/ad7387-4.html
   * https://www.analog.com/en/products/ad7388-4.html
+  * https://www.analog.com/en/products/adaq4370-4.html
+  * https://www.analog.com/en/products/adaq4380-4.html
 
 
 $ref: /schemas/spi/spi-peripheral-props.yaml#
@@ -46,6 +48,8 @@ properties:
       - adi,ad7386-4
       - adi,ad7387-4
       - adi,ad7388-4
+      - adi,adaq4370-4
+      - adi,adaq4380-4
 
   reg:
     maxItems: 1
@@ -70,6 +74,20 @@ properties:
   refin-supply:
     description:
       A 2.5V to 3.3V supply for external reference voltage, for ad7380-4 only.
+      For adaq devices, a 5V supply voltage. A 3.3V internal reference is
+      derived from it. Connect to vs-p-supply for normal operation.
+
+  vs-p-supply:
+    description:
+      Amplifiers positive supply.
+
+  vs-n-supply:
+    description:
+      Amplifiers negative supply.
+
+  ldo-supply:
+    description:
+      LDO supply. Connect to vs-p-supply or a 3.6 to 5.5 V supply.
 
   aina-supply:
     description:
@@ -97,12 +115,45 @@ properties:
       specify the ALERT interrupt.
     maxItems: 1
 
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
 required:
   - compatible
   - reg
   - vcc-supply
   - vlogic-supply
 
+patternProperties:
+  "^channel@[0-3]$":
+    $ref: adc.yaml
+    type: object
+
+    properties:
+      reg:
+        description:
+          The channel number. From 0 to 3 corresponding to channels A,B,C,D
+        minimum: 0
+        maximum: 3
+
+      adi,gain-milli:
+        description:
+          The hardware gain applied to the ADC input (in milli units).
+          If not present, default to 1000 (no actual gain applied).
+          Refer to the typical connection diagrams section of the datasheet for
+          pin wiring.
+        $ref: /schemas/types.yaml#/definitions/uint16
+        enum: [300, 600, 1000, 1600]
+        default: 1000
+
+    required:
+      - reg
+
+    additionalProperties: false
+
 unevaluatedProperties: false
 
 allOf:
@@ -140,6 +191,7 @@ allOf:
         aind-supply: false
 
   # ad7380-4 uses refin-supply as external reference.
+  # adaq devices use internal reference only, derived from refin-supply
   # All other chips from ad738x family use refio as optional external reference.
   # When refio-supply is omitted, internal reference is used.
   - if:
@@ -147,6 +199,8 @@ allOf:
         compatible:
           enum:
             - adi,ad7380-4
+            - adi,adaq4370-4
+            - adi,adaq4380-4
     then:
       properties:
         refio-supply: false
@@ -156,6 +210,27 @@ allOf:
       properties:
         refin-supply: false
 
+  # adaq devices need more supplies and using channel to declare gain property
+  # only applies to adaq devices
+  - if:
+      properties:
+        compatible:
+          enum:
+            - adi,adaq4370-4
+            - adi,adaq4380-4
+    then:
+      required:
+        - vs-p-supply
+        - vs-n-supply
+        - ldo-supply
+    else:
+      properties:
+        vs-p-supply: false
+        vs-n-supply: false
+        ldo-supply: false
+      patternProperties:
+        "^channel@[0-3]$": false
+
 examples:
   - |
     #include <dt-bindings/interrupt-controller/irq.h>
@@ -180,3 +255,48 @@ examples:
             refio-supply = <&supply_2_5V>;
         };
     };
+
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@0 {
+            compatible = "adi,adaq4380-4";
+            reg = <0>;
+
+            spi-cpol;
+            spi-cpha;
+            spi-max-frequency = <80000000>;
+
+            interrupts = <27 IRQ_TYPE_EDGE_FALLING>;
+            interrupt-parent = <&gpio0>;
+
+            vcc-supply = <&supply_3_3V>;
+            vlogic-supply = <&supply_3_3V>;
+            refin-supply = <&supply_5V>;
+            vs-p-supply = <&supply_5V>;
+            vs-n-supply = <&supply_0V>;
+            ldo-supply = <&supply_5V>;
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            channel@0 {
+                reg = <0>;
+                adi,gain-milli = /bits/ 16 <300>;
+            };
+
+            channel@2 {
+                reg = <2>;
+                adi,gain-milli = /bits/ 16 <600>;
+            };
+
+            channel@3 {
+                reg = <3>;
+                adi,gain-milli = /bits/ 16 <1000>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml
index 69408cae3db9..ab5881d0d017 100644
--- a/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml
@@ -14,6 +14,11 @@ description: |
   https://www.analog.com/media/en/technical-documentation/data-sheets/AD7605-4.pdf
   https://www.analog.com/media/en/technical-documentation/data-sheets/ad7606_7606-6_7606-4.pdf
   https://www.analog.com/media/en/technical-documentation/data-sheets/AD7606B.pdf
+  https://www.analog.com/media/en/technical-documentation/data-sheets/ad7606c-16.pdf
+  https://www.analog.com/media/en/technical-documentation/data-sheets/ad7606c-18.pdf
+  https://www.analog.com/media/en/technical-documentation/data-sheets/ad7607.pdf
+  https://www.analog.com/media/en/technical-documentation/data-sheets/ad7608.pdf
+  https://www.analog.com/media/en/technical-documentation/data-sheets/ad7609.pdf
   https://www.analog.com/media/en/technical-documentation/data-sheets/AD7616.pdf
 
 properties:
@@ -24,11 +29,27 @@ properties:
       - adi,ad7606-6
       - adi,ad7606-8  # Referred to as AD7606 (without -8) in the datasheet
       - adi,ad7606b
+      - adi,ad7606c-16
+      - adi,ad7606c-18
+      - adi,ad7607
+      - adi,ad7608
+      - adi,ad7609
       - adi,ad7616
 
   reg:
     maxItems: 1
 
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  # According to the datasheet, "Data is clocked in from SDI on the falling
+  # edge of SCLK, while data is clocked out on DOUTA on the rising edge of
+  # SCLK".  Also, even if not stated textually in the datasheet, it is made
+  # clear on the diagrams that sclk idles at high.  Subsequently, in case SPI
+  # interface is used, the correct way is to only set spi-cpol.
   spi-cpha: true
 
   spi-cpol: true
@@ -114,18 +135,91 @@ properties:
       assumed that the pins are hardwired to VDD.
     type: boolean
 
+  pwms:
+    description:
+      In case the conversion is triggered by a PWM instead of a GPIO plugged to
+      the CONVST pin, the PWM must be referenced.
+      The first is the PWM connected to CONVST or CONVST1 for the chips with the
+      2nd PWM connected to CONVST2, if CONVST2 is available and not shorted to
+      CONVST1.
+    minItems: 1
+    maxItems: 2
+
+  pwm-names:
+    items:
+      - const: convst1
+      - const: convst2
+
+  io-backends:
+    description:
+      A reference to the iio-backend, which is responsible handling the BUSY
+      pin's falling edge and communication.
+      An example of backend can be found at
+      http://analogdevicesinc.github.io/hdl/library/axi_ad7606x/index.html
+
+
+patternProperties:
+  "^channel@[1-8]$":
+    type: object
+    $ref: adc.yaml
+    unevaluatedProperties: false
+
+    properties:
+      reg:
+        description:
+          The channel number, as specified in the datasheet (from 1 to 8).
+        minimum: 1
+        maximum: 8
+
+      diff-channels:
+        description:
+          Each channel can be configured as a bipolar differential channel.
+          The ADC uses the same positive and negative inputs for this.
+          This property must be specified as 'reg' (or the channel number) for
+          both positive and negative inputs (i.e. diff-channels = <reg reg>).
+          Since the configuration is bipolar differential, the 'bipolar'
+          property is required.
+        items:
+          minimum: 1
+          maximum: 8
+
+      bipolar:
+        description:
+          The ADC channels can be configured as
+             * Bipolar single-ended
+             * Unipolar single-ended
+             * Bipolar differential
+          Therefore in the DT, if no channel node is specified, it is considered
+          'unipolar single-ended'. So for the other configurations the 'bipolar'
+          property must be specified. If 'diff-channels' is specified, it is
+          considered a bipolar differential channel. Otherwise it is bipolar
+          single-ended.
+
+    required:
+      - reg
+      - bipolar
+
 required:
   - compatible
   - reg
-  - spi-cpha
   - avcc-supply
   - vdrive-supply
-  - interrupts
-  - adi,conversion-start-gpios
 
 allOf:
   - $ref: /schemas/spi/spi-peripheral-props.yaml#
 
+  - oneOf:
+      - required:
+          - adi,conversion-start-gpios
+      - required:
+          - pwms
+
+  - oneOf:
+      - required:
+          - interrupts
+      - required:
+          - io-backends
+
   - if:
       properties:
         compatible:
@@ -162,19 +256,68 @@ allOf:
               - adi,ad7606-4
               - adi,ad7606-6
               - adi,ad7606-8
+              - adi,ad7607
+              - adi,ad7608
+              - adi,ad7609
     then:
       properties:
         adi,sw-mode: false
     else:
       properties:
+        pwms:
+          maxItems: 1
+        pwm-names:
+          maxItems: 1
         adi,conversion-start-gpios:
           maxItems: 1
 
+  - if:
+      not:
+        required:
+          - adi,sw-mode
+    then:
+      patternProperties:
+        "^channel@[1-8]$": false
+
+  - if:
+      not:
+        properties:
+          compatible:
+            enum:
+              - adi,ad7606c-16
+              - adi,ad7606c-18
+    then:
+      patternProperties:
+        "^channel@[1-8]$": false
+
 unevaluatedProperties: false
 
 examples:
   - |
     #include <dt-bindings/gpio/gpio.h>
+    iio-backend {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        adi_adc@0 {
+            compatible = "adi,ad7606b";
+            reg = <0>;
+            pwms = <&axi_pwm_gen 0 0>;
+
+            avcc-supply = <&adc_vref>;
+            vdrive-supply = <&vdd_supply>;
+
+            reset-gpios = <&gpio0 91 GPIO_ACTIVE_HIGH>;
+            standby-gpios = <&gpio0 90 GPIO_ACTIVE_LOW>;
+            adi,range-gpios = <&gpio0 89 GPIO_ACTIVE_HIGH>;
+            adi,oversampling-ratio-gpios = <&gpio0 88 GPIO_ACTIVE_HIGH
+                                            &gpio0 87 GPIO_ACTIVE_HIGH
+                                            &gpio0 86 GPIO_ACTIVE_HIGH>;
+            io-backends = <&iio_backend>;
+        };
+    };
+
+  - |
+    #include <dt-bindings/gpio/gpio.h>
     #include <dt-bindings/interrupt-controller/irq.h>
     spi {
         #address-cells = <1>;
@@ -185,7 +328,6 @@ examples:
             reg = <0>;
             spi-max-frequency = <1000000>;
             spi-cpol;
-            spi-cpha;
 
             avcc-supply = <&adc_vref>;
             vdrive-supply = <&vdd_supply>;
@@ -202,4 +344,53 @@ examples:
             standby-gpios = <&gpio 24 GPIO_ACTIVE_LOW>;
         };
     };
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@0 {
+            compatible = "adi,ad7606c-18";
+            reg = <0>;
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            spi-max-frequency = <1000000>;
+            spi-cpol;
+
+            avcc-supply = <&adc_vref>;
+            vdrive-supply = <&vdd_supply>;
+
+            interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
+            interrupt-parent = <&gpio>;
+
+            adi,conversion-start-gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
+            reset-gpios = <&gpio 27 GPIO_ACTIVE_HIGH>;
+            adi,first-data-gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
+            standby-gpios = <&gpio 24 GPIO_ACTIVE_LOW>;
+
+            adi,sw-mode;
+
+            channel@1 {
+                reg = <1>;
+                diff-channels = <1 1>;
+                bipolar;
+            };
+
+            channel@3 {
+                reg = <3>;
+                bipolar;
+            };
+
+            channel@8 {
+                reg = <8>;
+                diff-channels = <8 8>;
+                bipolar;
+            };
+
+        };
+    };
 ...
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7625.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7625.yaml
new file mode 100644
index 000000000000..8848562af28f
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7625.yaml
@@ -0,0 +1,176 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/adi,ad7625.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices Fast PulSAR Analog to Digital Converters
+
+maintainers:
+  - Michael Hennerich <Michael.Hennerich@analog.com>
+  - Nuno Sá <nuno.sa@analog.com>
+
+description: |
+  A family of single channel differential analog to digital converters.
+
+  * https://www.analog.com/en/products/ad7625.html
+  * https://www.analog.com/en/products/ad7626.html
+  * https://www.analog.com/en/products/ad7960.html
+  * https://www.analog.com/en/products/ad7961.html
+
+properties:
+  compatible:
+    enum:
+      - adi,ad7625
+      - adi,ad7626
+      - adi,ad7960
+      - adi,ad7961
+
+  vdd1-supply: true
+  vdd2-supply: true
+  vio-supply: true
+
+  ref-supply:
+    description:
+      Voltage regulator for the external reference voltage (REF).
+
+  refin-supply:
+    description:
+      Voltage regulator for the reference buffer input (REFIN).
+
+  clocks:
+    description:
+      The clock connected to the CLK pins, gated by the clk_gate PWM.
+    maxItems: 1
+
+  pwms:
+    items:
+      - description: PWM connected to the CNV input on the ADC.
+      - description: PWM that gates the clock connected to the ADC's CLK input.
+
+  pwm-names:
+    items:
+      - const: cnv
+      - const: clk_gate
+
+  io-backends:
+    description:
+      The AXI ADC IP block connected to the D+/- and DCO+/- lines of the
+      ADC. An example backend can be found at
+      http://analogdevicesinc.github.io/hdl/projects/pulsar_lvds/index.html.
+    maxItems: 1
+
+  adi,no-dco:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      Indicates the wiring of the DCO+/- lines. If true, then they are
+      grounded and the device is in self-clocked mode. If this is not
+      present, then the device is in echoed clock mode.
+
+  adi,en0-always-on:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      Indicates if EN0 is hard-wired to the high state. If neither this
+      nor en0-gpios are present, then EN0 is hard-wired low.
+
+  adi,en1-always-on:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      Indicates if EN1 is hard-wired to the high state. If neither this
+      nor en1-gpios are present, then EN1 is hard-wired low.
+
+  adi,en2-always-on:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      Indicates if EN2 is hard-wired to the high state. If neither this
+      nor en2-gpios are present, then EN2 is hard-wired low.
+
+  adi,en3-always-on:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      Indicates if EN3 is hard-wired to the high state. If neither this
+      nor en3-gpios are present, then EN3 is hard-wired low.
+
+  en0-gpios:
+    description:
+      Configurable EN0 pin.
+
+  en1-gpios:
+    description:
+      Configurable EN1 pin.
+
+  en2-gpios:
+    description:
+      Configurable EN2 pin.
+
+  en3-gpios:
+    description:
+      Configurable EN3 pin.
+
+required:
+  - compatible
+  - vdd1-supply
+  - vdd2-supply
+  - vio-supply
+  - clocks
+  - pwms
+  - pwm-names
+  - io-backends
+
+allOf:
+  - if:
+      required:
+        - ref-supply
+    then:
+      properties:
+        refin-supply: false
+  - if:
+      required:
+        - refin-supply
+    then:
+      properties:
+        ref-supply: false
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - adi,ad7625
+              - adi,ad7626
+    then:
+      properties:
+        en2-gpios: false
+        en3-gpios: false
+        adi,en2-always-on: false
+        adi,en3-always-on: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - adi,ad7960
+              - adi,ad7961
+    then:
+      # ad796x parts must have one of the two supplies
+      oneOf:
+        - required: [ref-supply]
+        - required: [refin-supply]
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    adc {
+        compatible = "adi,ad7625";
+        vdd1-supply = <&supply_5V>;
+        vdd2-supply = <&supply_2_5V>;
+        vio-supply = <&supply_2_5V>;
+        io-backends = <&axi_adc>;
+        clocks = <&ref_clk>;
+        pwms = <&axi_pwm_gen 0 0>, <&axi_pwm_gen 1 0>;
+        pwm-names = "cnv", "clk_gate";
+        en0-gpios = <&gpio0 86 GPIO_ACTIVE_HIGH>;
+        en1-gpios = <&gpio0 87 GPIO_ACTIVE_HIGH>;
+    };
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7779.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7779.yaml
new file mode 100644
index 000000000000..044f92f39cfa
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7779.yaml
@@ -0,0 +1,110 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/adi,ad7779.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD777X family 8-Channel, 24-Bit, Simultaneous Sampling ADCs
+
+maintainers:
+  - Ramona Nechita <ramona.nechita@analog.com>
+
+description: |
+  The AD777X family consist of 8-channel, simultaneous sampling analog-to-
+  digital converter (ADC). Eight full Σ-Δ ADCs are on-chip. The
+  AD7771 provides an ultralow input current to allow direct sensor
+  connection. Each input channel has a programmable gain stage
+  allowing gains of 1, 2, 4, and 8 to map lower amplitude sensor
+  outputs into the full-scale ADC input range, maximizing the
+  dynamic range of the signal chain.
+
+  https://www.analog.com/media/en/technical-documentation/data-sheets/ad7770.pdf
+  https://www.analog.com/media/en/technical-documentation/data-sheets/ad7771.pdf
+  https://www.analog.com/media/en/technical-documentation/data-sheets/ad7779.pdf
+
+$ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+  compatible:
+    enum:
+      - adi,ad7770
+      - adi,ad7771
+      - adi,ad7779
+
+  reg:
+    maxItems: 1
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+  clocks:
+    maxItems: 1
+
+  avdd1-supply:
+    description: Front-End analog supply AVDD1. Can be used as conversion ref.
+
+  avdd2-supply:
+    description: AVDD2 Analog Supply from 2.2 V to 3.6 V.
+
+  avdd4-supply:
+    description: AVDD4 SAR Analog Supply and Reference Source.
+
+  interrupts:
+    minItems: 1
+    items:
+      - description: |
+          adc_rdy: Interrupt line for DRDY signal which indicates the end of
+          conversion independently of the interface selected to read back the
+          Σ-∆ conversion.
+      - description: |
+          Alert: The chip includes self diagnostic features to guarantee the
+          correct operation. If an error is detected, the ALERT pin is pulled
+          high to generate an external interruption to the controller.
+
+  interrupt-names:
+    minItems: 1
+    maxItems: 2
+    items:
+      enum:
+        - adc_rdy
+        - alert
+
+  start-gpios:
+    description:
+      Pin that controls start synchronization pulse.
+    maxItems: 1
+
+  reset-gpios:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@0 {
+          compatible = "adi,ad7779";
+          reg = <0>;
+          start-gpios = <&gpio0 87 GPIO_ACTIVE_LOW>;
+          reset-gpios = <&gpio0 93 GPIO_ACTIVE_LOW>;
+          interrupt-parent = <&intc>;
+          interrupts = <0 56 IRQ_TYPE_LEVEL_HIGH>;
+          interrupt-names = "adc_rdy";
+          clocks = <&adc_clk>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/adc/amlogic,meson-saradc.yaml b/Documentation/devicetree/bindings/iio/adc/amlogic,meson-saradc.yaml
index f748f3a60b35..b0962a4583ac 100644
--- a/Documentation/devicetree/bindings/iio/adc/amlogic,meson-saradc.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/amlogic,meson-saradc.yaml
@@ -98,6 +98,7 @@ allOf:
         compatible:
           contains:
             enum:
+              - amlogic,meson8-saradc
               - amlogic,meson8b-saradc
               - amlogic,meson8m2-saradc
     then:
diff --git a/Documentation/devicetree/bindings/iio/adc/gehc,pmc-adc.yaml b/Documentation/devicetree/bindings/iio/adc/gehc,pmc-adc.yaml
new file mode 100644
index 000000000000..2cea7c104a26
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/gehc,pmc-adc.yaml
@@ -0,0 +1,86 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/gehc,pmc-adc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: GE HealthCare PMC Analog to Digital Converter (ADC)
+
+maintainers:
+  - Herve Codina <herve.codina@bootlin.com>
+
+description:
+  The GE HealthCare PMC ADC is a 16-Channel (voltage and current), 16-Bit ADC
+  with an I2C Interface.
+
+properties:
+  compatible:
+    const: gehc,pmc-adc
+
+  reg:
+    maxItems: 1
+
+  vdd-supply:
+    description:
+      Regulator for the VDD power supply.
+
+  vdda-supply:
+    description:
+      Regulator for the VDD analog (VDDA) power supply.
+
+  vddio-supply:
+    description:
+      Regulator for the VDD IO (VDDIO) power supply.
+
+  vref-supply:
+    description:
+      Regulator for the voltage reference power supply.
+
+  clocks:
+    maxItems: 1
+    description:
+      The component uses an external oscillator (osc) if an external oscillator
+      is connected to its clock pins. Otherwise, it uses an internal reference
+      clock.
+
+  clock-names:
+    items:
+      - const: osc
+
+  "#io-channel-cells":
+    const: 2
+    description: |
+      The first cell is the channel type (dt-bindings/iio/adc/gehc,pmc-adc.h
+      defines these values):
+       - 0: voltage
+       - 1: current
+      The second cell is the channel number from 0 to 15.
+
+required:
+  - compatible
+  - reg
+  - vdd-supply
+  - vdda-supply
+  - vddio-supply
+  - vref-supply
+  - '#io-channel-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@14 {
+            compatible = "gehc,pmc-adc";
+            reg = <0x14>;
+            vdd-supply = <&reg_vdd>;
+            vdda-supply = <&reg_vdda>;
+            vddio-supply = <&reg_vddio>;
+            vref-supply = <&reg_vref>;
+            #io-channel-cells = <2>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad3552r.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad3552r.yaml
index fc8b97f82077..2d2561a52683 100644
--- a/Documentation/devicetree/bindings/iio/dac/adi,ad3552r.yaml
+++ b/Documentation/devicetree/bindings/iio/dac/adi,ad3552r.yaml
@@ -30,7 +30,7 @@ properties:
     maxItems: 1
 
   spi-max-frequency:
-    maximum: 30000000
+    maximum: 66000000
 
   reset-gpios:
     maxItems: 1
@@ -60,6 +60,12 @@ properties:
     $ref: /schemas/types.yaml#/definitions/uint32
     enum: [0, 1, 2, 3]
 
+  io-backends:
+    description: The iio backend reference.
+      Device can be optionally connected to the "axi-ad3552r IP" fpga-based
+      QSPI + DDR (Double Data Rate) controller to reach high speed transfers.
+    maxItems: 1
+
   '#address-cells':
     const: 1
 
@@ -128,6 +134,7 @@ patternProperties:
           - custom-output-range-config
 
 allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
   - if:
       properties:
         compatible:
diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5791.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5791.yaml
index c81285d84db7..79cb4b78a88a 100644
--- a/Documentation/devicetree/bindings/iio/dac/adi,ad5791.yaml
+++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5791.yaml
@@ -26,16 +26,47 @@ properties:
   vdd-supply: true
   vss-supply: true
 
+  vcc-supply:
+    description:
+      Supply that powers the chip.
+
+  iovcc-supply:
+    description:
+      Supply for the digital interface.
+
+  vrefp-supply:
+    description:
+      Positive referance input voltage range. From 5v to (vdd - 2.5)
+
+  vrefn-supply:
+    description:
+      Negative referance input voltage range. From (vss + 2.5) to 0.
+
   adi,rbuf-gain2-en:
     description: Specify to allow an external amplifier to be connected in a
       gain of two configuration.
     type: boolean
 
+  reset-gpios:
+    maxItems: 1
+
+  clear-gpios:
+    maxItems: 1
+
+  ldac-gpios:
+    description:
+      LDAC pin to be used as a hardware trigger to update the DAC channels.
+    maxItems: 1
+
 required:
   - compatible
   - reg
   - vdd-supply
   - vss-supply
+  - vcc-supply
+  - iovcc-supply
+  - vrefp-supply
+  - vrefn-supply
 
 allOf:
   - $ref: /schemas/spi/spi-peripheral-props.yaml#
@@ -44,6 +75,7 @@ unevaluatedProperties: false
 
 examples:
   - |
+    #include <dt-bindings/gpio/gpio.h>
     spi {
         #address-cells = <1>;
         #size-cells = <0>;
@@ -53,6 +85,13 @@ examples:
             reg = <0>;
             vss-supply = <&dac_vss>;
             vdd-supply = <&dac_vdd>;
+            vcc-supply = <&dac_vcc>;
+            iovcc-supply = <&dac_iovcc>;
+            vrefp-supply = <&dac_vrefp>;
+            vrefn-supply = <&dac_vrefn>;
+            reset-gpios = <&gpio_bd 16 GPIO_ACTIVE_LOW>;
+            clear-gpios = <&gpio_bd 17 GPIO_ACTIVE_LOW>;
+            ldac-gpios = <&gpio_bd 18 GPIO_ACTIVE_HIGH>;
         };
     };
 ...
diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad8460.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad8460.yaml
new file mode 100644
index 000000000000..b65928024e12
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/dac/adi,ad8460.yaml
@@ -0,0 +1,164 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2024 Analog Devices Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/dac/adi,ad8460.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD8460 DAC
+
+maintainers:
+  - Mariel Tinaco <mariel.tinaco@analog.com>
+
+description: |
+  Analog Devices AD8460 110 V High Voltage, 1 A High Current,
+  Arbitrary Waveform Generator with Integrated 14-Bit High Speed DAC
+  https://www.analog.com/media/en/technical-documentation/data-sheets/ad8460.pdf
+
+properties:
+  compatible:
+    enum:
+      - adi,ad8460
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  dmas:
+    maxItems: 1
+
+  dma-names:
+    items:
+      - const: tx
+
+  spi-max-frequency:
+    maximum: 20000000
+
+  hvcc-supply:
+    description: Positive high voltage power supply line
+
+  hvee-supply:
+    description: Negative high voltage power supply line
+
+  vcc-5v-supply:
+    description: Low voltage power supply
+
+  vref-5v-supply:
+    description: Reference voltage for analog low voltage
+
+  dvdd-3p3v-supply:
+    description: Digital supply bypass
+
+  avdd-3p3v-supply:
+    description: Analog supply bypass
+
+  refio-1p2v-supply:
+    description: Drive voltage in the range of 1.2V maximum to as low as
+      low as 0.12V through the REF_IO pin to adjust full scale output span
+
+  adi,external-resistor-ohms:
+    description: Specify value of external resistor connected to FS_ADJ pin
+      to establish internal HVDAC's reference current I_REF
+    minimum: 2000
+    maximum: 20000
+    default: 2000
+
+  adi,range-microvolt:
+    description: Voltage output range specified as <minimum, maximum>
+    items:
+      - minimum: -55000000
+        maximum: 0
+        default: 0
+      - minimum: 0
+        maximum: 55000000
+        default: 0
+
+  adi,range-microamp:
+    description: Current output range specified as <minimum, maximum>
+    items:
+      - minimum: -1000000
+        maximum: 0
+        default: 0
+      - minimum: 0
+        maximum: 1000000
+        default: 0
+
+  adi,max-millicelsius:
+    description: Overtemperature threshold
+    minimum: 0
+    maximum: 150000
+    default: 0
+
+  shutdown-reset-gpios:
+    description: Corresponds to SDN_RESET pin. To exit shutdown
+      or sleep mode, pulse SDN_RESET HIGH, then leave LOW.
+    maxItems: 1
+
+  reset-gpios:
+    description: Manual Power On Reset (POR). Pull this GPIO pin
+      LOW and then HIGH to reset all digital registers to default
+    maxItems: 1
+
+  shutdown-gpios:
+    description: Corresponds to SDN_IO pin. Shutdown may be
+      initiated by the user, by pulsing SDN_IO high. To exit shutdown,
+      pulse SDN_IO low, then float.
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - hvcc-supply
+  - hvee-supply
+  - vcc-5v-supply
+  - vref-5v-supply
+  - dvdd-3p3v-supply
+  - avdd-3p3v-supply
+  - refio-1p2v-supply
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        dac@0 {
+            compatible = "adi,ad8460";
+            reg = <0>;
+            spi-max-frequency = <8000000>;
+
+            dmas = <&tx_dma 0>;
+            dma-names = "tx";
+
+            shutdown-reset-gpios = <&gpio 86 GPIO_ACTIVE_HIGH>;
+            reset-gpios = <&gpio 91 GPIO_ACTIVE_LOW>;
+            shutdown-gpios = <&gpio 88 GPIO_ACTIVE_HIGH>;
+
+            clocks = <&sync_ext_clk>;
+
+            hvcc-supply = <&hvcc>;
+            hvee-supply = <&hvee>;
+            vcc-5v-supply = <&vcc_5>;
+            vref-5v-supply = <&vref_5>;
+            dvdd-3p3v-supply = <&dvdd_3_3>;
+            avdd-3p3v-supply = <&avdd_3_3>;
+            refio-1p2v-supply = <&refio_1_2>;
+
+            adi,external-resistor-ohms = <2000>;
+            adi,range-microvolt = <(-40000000) 40000000>;
+            adi,range-microamp = <0 50000>;
+            adi,max-millicelsius = <50000>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/iio/dac/adi,axi-dac.yaml b/Documentation/devicetree/bindings/iio/dac/adi,axi-dac.yaml
index a55e9bfc66d7..1adba9aceeb1 100644
--- a/Documentation/devicetree/bindings/iio/dac/adi,axi-dac.yaml
+++ b/Documentation/devicetree/bindings/iio/dac/adi,axi-dac.yaml
@@ -19,11 +19,13 @@ description: |
   memory via DMA into the DAC.
 
   https://wiki.analog.com/resources/fpga/docs/axi_dac_ip
+  https://analogdevicesinc.github.io/hdl/library/axi_ad3552r/index.html
 
 properties:
   compatible:
     enum:
       - adi,axi-dac-9.1.b
+      - adi,axi-ad3552r
 
   reg:
     maxItems: 1
@@ -36,7 +38,14 @@ properties:
       - const: tx
 
   clocks:
-    maxItems: 1
+    minItems: 1
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: s_axi_aclk
+      - const: dac_clk
+    minItems: 1
 
   '#io-backend-cells':
     const: 0
@@ -47,7 +56,29 @@ required:
   - reg
   - clocks
 
-additionalProperties: false
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: adi,axi-ad3552r
+    then:
+      $ref: /schemas/spi/spi-controller.yaml#
+      properties:
+        clocks:
+          minItems: 2
+        clock-names:
+          minItems: 2
+      required:
+        - clock-names
+    else:
+      properties:
+        clocks:
+          maxItems: 1
+        clock-names:
+          maxItems: 1
+
+unevaluatedProperties: false
 
 examples:
   - |
@@ -57,6 +88,38 @@ examples:
         dmas = <&tx_dma 0>;
         dma-names = "tx";
         #io-backend-cells = <0>;
-        clocks = <&axi_clk>;
+        clocks = <&clkc 15>;
+        clock-names = "s_axi_aclk";
+    };
+
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    axi_dac: spi@44a70000 {
+        compatible = "adi,axi-ad3552r";
+        reg = <0x44a70000 0x1000>;
+        dmas = <&dac_tx_dma 0>;
+        dma-names = "tx";
+        #io-backend-cells = <0>;
+        clocks = <&clkc 15>, <&ref_clk>;
+        clock-names = "s_axi_aclk", "dac_clk";
+
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        dac@0 {
+            compatible = "adi,ad3552r";
+            reg = <0>;
+            reset-gpios = <&gpio0 92 GPIO_ACTIVE_HIGH>;
+            io-backends = <&axi_dac>;
+            spi-max-frequency = <20000000>;
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            channel@0 {
+                reg = <0>;
+                adi,output-range-microvolt = <(-10000000) (10000000)>;
+            };
+        };
     };
 ...
diff --git a/Documentation/devicetree/bindings/iio/imu/bosch,bmi270.yaml b/Documentation/devicetree/bindings/iio/imu/bosch,bmi270.yaml
new file mode 100644
index 000000000000..7b0cde1c9b0a
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/imu/bosch,bmi270.yaml
@@ -0,0 +1,79 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/imu/bosch,bmi270.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Bosch BMI270 6-Axis IMU
+
+maintainers:
+  - Alex Lanzano <lanzano.alex@gmail.com>
+
+description: |
+  BMI270 is a 6-axis inertial measurement unit that can measure acceleration and
+  angular velocity. The sensor also supports configurable interrupt events such
+  as motion, step counter, and wrist motion gestures. The sensor can communicate
+  I2C or SPI.
+  https://www.bosch-sensortec.com/products/motion-sensors/imus/bmi270/
+
+properties:
+  compatible:
+    enum:
+      - bosch,bmi260
+      - bosch,bmi270
+
+  reg:
+    maxItems: 1
+
+  vdd-supply: true
+  vddio-supply: true
+
+  interrupts:
+    minItems: 1
+    maxItems: 2
+
+  interrupt-names:
+    minItems: 1
+    maxItems: 2
+    items:
+      enum:
+        - INT1
+        - INT2
+
+  drive-open-drain:
+    description:
+      set if the specified interrupt pins should be configured as
+      open drain. If not set, defaults to push-pull.
+
+  mount-matrix:
+    description:
+      an optional 3x3 mounting rotation matrix.
+
+required:
+  - compatible
+  - reg
+  - vdd-supply
+  - vddio-supply
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        imu@68 {
+            compatible = "bosch,bmi270";
+            reg = <0x68>;
+            vdd-supply = <&vdd>;
+            vddio-supply = <&vddio>;
+            interrupt-parent = <&gpio1>;
+            interrupts = <16 IRQ_TYPE_EDGE_RISING>;
+            interrupt-names = "INT1";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/iio/imu/bosch,smi240.yaml b/Documentation/devicetree/bindings/iio/imu/bosch,smi240.yaml
new file mode 100644
index 000000000000..58f1411728f6
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/imu/bosch,smi240.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/imu/bosch,smi240.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Bosch smi240 imu
+
+maintainers:
+  - Jianping Shen <Jianping.Shen@de.bosch.com>
+
+description:
+  Inertial Measurement Unit with Accelerometer and Gyroscope
+  with a measurement range of +/-300°/s and up to 16g.
+  https://www.bosch-semiconductors.com/mems-sensors/highly-automated-driving/smi240/
+
+properties:
+  compatible:
+    const: bosch,smi240
+
+  reg:
+    maxItems: 1
+
+  vdd-supply: true
+  vddio-supply: true
+
+required:
+  - compatible
+  - reg
+  - vdd-supply
+  - vddio-supply
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        imu@0 {
+            compatible = "bosch,smi240";
+            reg = <0>;
+            vdd-supply = <&vdd>;
+            vddio-supply = <&vddio>;
+            spi-max-frequency = <10000000>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/iio/imu/invensense,icm42600.yaml b/Documentation/devicetree/bindings/iio/imu/invensense,icm42600.yaml
index 3769f8e8e98c..7e4492bbd027 100644
--- a/Documentation/devicetree/bindings/iio/imu/invensense,icm42600.yaml
+++ b/Documentation/devicetree/bindings/iio/imu/invensense,icm42600.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: InvenSense ICM-426xx Inertial Measurement Unit
 
 maintainers:
-  - Jean-Baptiste Maneyrol <jmaneyrol@invensense.com>
+  - Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
 
 description: |
   6-axis MotionTracking device that combines a 3-axis gyroscope and a 3-axis
diff --git a/Documentation/devicetree/bindings/iio/imu/invensense,mpu6050.yaml b/Documentation/devicetree/bindings/iio/imu/invensense,mpu6050.yaml
index 587ff2bced2d..f91954870a44 100644
--- a/Documentation/devicetree/bindings/iio/imu/invensense,mpu6050.yaml
+++ b/Documentation/devicetree/bindings/iio/imu/invensense,mpu6050.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: InvenSense MPU-6050 Six-Axis (Gyro + Accelerometer) MEMS MotionTracking Device
 
 maintainers:
-  - Jean-Baptiste Maneyrol <jmaneyrol@invensense.com>
+  - Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
 
 description: |
   These devices support both I2C and SPI bus interfaces.
@@ -36,6 +36,11 @@ properties:
       - items:
           - const: invensense,icm20608d
           - const: invensense,icm20608
+      - items:
+          - enum:
+              - invensense,iam20680hp
+              - invensense,iam20680ht
+          - const: invensense,iam20680
 
   reg:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/iio/light/ti,opt3001.yaml b/Documentation/devicetree/bindings/iio/light/ti,opt3001.yaml
index 441e9343fc97..67ca8d08256a 100644
--- a/Documentation/devicetree/bindings/iio/light/ti,opt3001.yaml
+++ b/Documentation/devicetree/bindings/iio/light/ti,opt3001.yaml
@@ -15,7 +15,9 @@ description: |
 
 properties:
   compatible:
-    const: ti,opt3001
+    enum:
+      - ti,opt3001
+      - ti,opt3002
 
   reg:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/iio/light/veml6030.yaml b/Documentation/devicetree/bindings/iio/light/veml6030.yaml
deleted file mode 100644
index fb19a2d7a849..000000000000
--- a/Documentation/devicetree/bindings/iio/light/veml6030.yaml
+++ /dev/null
@@ -1,64 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0+
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/iio/light/veml6030.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: VEML6030 Ambient Light Sensor (ALS)
-
-maintainers:
-  - Rishi Gupta <gupt21@gmail.com>
-
-description: |
-  Bindings for the ambient light sensor veml6030 from Vishay
-  Semiconductors over an i2c interface.
-
-  Irrespective of whether interrupt is used or not, application
-  can get the ALS and White channel reading from IIO raw interface.
-
-  If the interrupts are used, application will receive an IIO event
-  whenever configured threshold is crossed.
-
-  Specifications about the sensor can be found at:
-    https://www.vishay.com/docs/84366/veml6030.pdf
-
-properties:
-  compatible:
-    enum:
-      - vishay,veml6030
-
-  reg:
-    description:
-      I2C address of the device.
-    enum:
-      - 0x10 # ADDR pin pulled down
-      - 0x48 # ADDR pin pulled up
-
-  interrupts:
-    description:
-      interrupt mapping for IRQ. Configure with IRQ_TYPE_LEVEL_LOW.
-      Refer to interrupt-controller/interrupts.txt for generic
-      interrupt client node bindings.
-    maxItems: 1
-
-required:
-  - compatible
-  - reg
-
-additionalProperties: false
-
-examples:
-  - |
-    #include <dt-bindings/interrupt-controller/irq.h>
-
-    i2c {
-        #address-cells = <1>;
-        #size-cells = <0>;
-
-        light-sensor@10 {
-                compatible = "vishay,veml6030";
-                reg = <0x10>;
-                interrupts = <12 IRQ_TYPE_LEVEL_LOW>;
-        };
-    };
-...
diff --git a/Documentation/devicetree/bindings/iio/light/vishay,veml6030.yaml b/Documentation/devicetree/bindings/iio/light/vishay,veml6030.yaml
new file mode 100644
index 000000000000..4ea69f1fdd63
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/light/vishay,veml6030.yaml
@@ -0,0 +1,107 @@
+# SPDX-License-Identifier: GPL-2.0+
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/light/vishay,veml6030.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: VEML3235, VEML6030, VEML6035 and VEML7700 Ambient Light Sensors (ALS)
+
+maintainers:
+  - Rishi Gupta <gupt21@gmail.com>
+
+description: |
+  Bindings for the ambient light sensors veml6030 and veml6035 from
+  Vishay Semiconductors over an i2c interface.
+
+  Irrespective of whether interrupt is used or not, application
+  can get the ALS and White channel reading from IIO raw interface.
+
+  If the interrupts are used, application will receive an IIO event
+  whenever configured threshold is crossed.
+
+  Specifications about the sensors can be found at:
+    https://www.vishay.com/docs/80131/veml3235.pdf
+    https://www.vishay.com/docs/84366/veml6030.pdf
+    https://www.vishay.com/docs/84889/veml6035.pdf
+    https://www.vishay.com/docs/84286/veml7700.pdf
+
+properties:
+  compatible:
+    enum:
+      - vishay,veml3235
+      - vishay,veml6030
+      - vishay,veml6035
+      - vishay,veml7700
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description:
+      interrupt mapping for IRQ. Configure with IRQ_TYPE_LEVEL_LOW.
+      Refer to interrupt-controller/interrupts.txt for generic
+      interrupt client node bindings.
+    maxItems: 1
+
+  vdd-supply: true
+
+required:
+  - compatible
+  - reg
+  - vdd-supply
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          enum:
+            - vishay,veml6030
+    then:
+      properties:
+        reg:
+          enum:
+            - 0x10  # ADDR pin pulled down
+            - 0x48  # ADDR pin pulled up
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - vishay,veml6035
+    then:
+      properties:
+        reg:
+          enum:
+            - 0x29
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - vishay,veml3235
+            - vishay,veml7700
+    then:
+      properties:
+        reg:
+          enum:
+            - 0x10
+        interrupts: false
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        light-sensor@10 {
+                compatible = "vishay,veml6030";
+                reg = <0x10>;
+                interrupts = <12 IRQ_TYPE_LEVEL_LOW>;
+                vdd-supply = <&vdd>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/light/vishay,veml6075.yaml b/Documentation/devicetree/bindings/iio/light/vishay,veml6075.yaml
index ecf2339e02f6..d2effccbfb56 100644
--- a/Documentation/devicetree/bindings/iio/light/vishay,veml6075.yaml
+++ b/Documentation/devicetree/bindings/iio/light/vishay,veml6075.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/iio/light/vishay,veml6075.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Vishay VEML6075 UVA/B and VEML6040 RGBW sensors
+title: Vishay VEML6070 UVA, VEML6075 UVA/B and VEML6040 RGBW sensors
 
 maintainers:
   - Javier Carrasco <javier.carrasco.cruz@gmail.com>
@@ -16,11 +16,19 @@ properties:
   compatible:
     enum:
       - vishay,veml6040
+      - vishay,veml6070
       - vishay,veml6075
 
   reg:
     maxItems: 1
 
+  vishay,rset-ohms:
+    description:
+      Resistor used to select the integration time.
+    default: 270000
+    minimum: 75000
+    maximum: 1200000
+
   vdd-supply: true
 
 required:
@@ -28,6 +36,17 @@ required:
   - reg
   - vdd-supply
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          enum:
+            - vishay,veml6040
+            - vishay,veml6075
+    then:
+      properties:
+        vishay,rset-ohms: false
+
 additionalProperties: false
 
 examples:
diff --git a/Documentation/devicetree/bindings/iio/magnetometer/allegromicro,als31300.yaml b/Documentation/devicetree/bindings/iio/magnetometer/allegromicro,als31300.yaml
new file mode 100644
index 000000000000..52e3781834ee
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/magnetometer/allegromicro,als31300.yaml
@@ -0,0 +1,46 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/magnetometer/allegromicro,als31300.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allegro MicroSystems ALS31300 3-D Linear Hall Effect sensor
+
+maintainers:
+  - Neil Armstrong <neil.armstrong@linaro.org>
+
+properties:
+  $nodename:
+    pattern: '^magnetometer@[0-9a-f]+$'
+
+  compatible:
+    enum:
+      - allegromicro,als31300-500 # Factory configured at 500 Gauss input range
+      - allegromicro,als31300-1000 # Factory configured at 1000 Gauss input range
+      - allegromicro,als31300-2000 # Factory configured at 2000 Gauss input range
+
+  reg:
+    maxItems: 1
+
+  vcc-supply:
+    description: 5.5V supply
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      magnetometer@61 {
+        compatible = "allegromicro,als31300-500";
+        reg = <0x61>;
+        vcc-supply = <&hall_vcc>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/iio/pressure/bmp085.yaml b/Documentation/devicetree/bindings/iio/pressure/bmp085.yaml
index 6fda887ee9d4..cb201cecfa1a 100644
--- a/Documentation/devicetree/bindings/iio/pressure/bmp085.yaml
+++ b/Documentation/devicetree/bindings/iio/pressure/bmp085.yaml
@@ -47,15 +47,33 @@ properties:
     maxItems: 1
 
   interrupts:
-    description:
-      interrupt mapping for IRQ (BMP085 only)
     maxItems: 1
 
+  drive-open-drain:
+    description:
+      set if the interrupt pin should be configured as open drain.
+      If not set, defaults to push-pull configuration.
+    type: boolean
+
 required:
   - compatible
   - vddd-supply
   - vdda-supply
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          not:
+            contains:
+              enum:
+                - bosch,bmp085
+                - bosch,bmp380
+                - bosch,bmp580
+    then:
+      properties:
+        interrupts: false
+
 additionalProperties: false
 
 examples:
diff --git a/Documentation/devicetree/bindings/iio/temperature/ti,tmp006.yaml b/Documentation/devicetree/bindings/iio/temperature/ti,tmp006.yaml
index d43002b9bfdc..590f50ba3a31 100644
--- a/Documentation/devicetree/bindings/iio/temperature/ti,tmp006.yaml
+++ b/Documentation/devicetree/bindings/iio/temperature/ti,tmp006.yaml
@@ -23,6 +23,9 @@ properties:
   vdd-supply:
     description: provide VDD power to the sensor.
 
+  interrupts:
+    maxItems: 1
+
 required:
   - compatible
   - reg
@@ -31,6 +34,7 @@ additionalProperties: false
 
 examples:
   - |
+    #include <dt-bindings/interrupt-controller/irq.h>
     i2c {
         #address-cells = <1>;
         #size-cells = <0>;
@@ -38,5 +42,7 @@ examples:
             compatible = "ti,tmp006";
             reg = <0x40>;
             vdd-supply = <&ldo4_reg>;
+            interrupt-parent = <&gpio1>;
+            interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
         };
     };
diff --git a/Documentation/devicetree/bindings/interconnect/qcom,msm8998-bwmon.yaml b/Documentation/devicetree/bindings/interconnect/qcom,msm8998-bwmon.yaml
index 189f5900ee50..251410aabf38 100644
--- a/Documentation/devicetree/bindings/interconnect/qcom,msm8998-bwmon.yaml
+++ b/Documentation/devicetree/bindings/interconnect/qcom,msm8998-bwmon.yaml
@@ -26,6 +26,7 @@ properties:
       - items:
           - enum:
               - qcom,qcm2290-cpu-bwmon
+              - qcom,qcs8300-cpu-bwmon
               - qcom,sa8775p-cpu-bwmon
               - qcom,sc7180-cpu-bwmon
               - qcom,sc7280-cpu-bwmon
@@ -40,6 +41,7 @@ properties:
           - const: qcom,sdm845-bwmon    # BWMON v4, unified register space
       - items:
           - enum:
+              - qcom,qcs8300-llcc-bwmon
               - qcom,sa8775p-llcc-bwmon
               - qcom,sc7180-llcc-bwmon
               - qcom,sc8280xp-llcc-bwmon
diff --git a/Documentation/devicetree/bindings/interconnect/qcom,qcs615-rpmh.yaml b/Documentation/devicetree/bindings/interconnect/qcom,qcs615-rpmh.yaml
new file mode 100644
index 000000000000..9d762b2a1fcf
--- /dev/null
+++ b/Documentation/devicetree/bindings/interconnect/qcom,qcs615-rpmh.yaml
@@ -0,0 +1,73 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interconnect/qcom,qcs615-rpmh.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm RPMh Network-On-Chip Interconnect on QCS615
+
+maintainers:
+  - Raviteja Laggyshetty <quic_rlaggysh@quicinc.com>
+
+description: |
+  RPMh interconnect providers support system bandwidth requirements through
+  RPMh hardware accelerators known as Bus Clock Manager (BCM). The provider is
+  able to communicate with the BCM through the Resource State Coordinator (RSC)
+  associated with each execution environment. Provider nodes must point to at
+  least one RPMh device child node pertaining to their RSC and each provider
+  can map to multiple RPMh resources.
+
+  See also: include/dt-bindings/interconnect/qcom,qcs615-rpmh.h
+
+properties:
+  compatible:
+    enum:
+      - qcom,qcs615-aggre1-noc
+      - qcom,qcs615-camnoc-virt
+      - qcom,qcs615-config-noc
+      - qcom,qcs615-dc-noc
+      - qcom,qcs615-gem-noc
+      - qcom,qcs615-ipa-virt
+      - qcom,qcs615-mc-virt
+      - qcom,qcs615-mmss-noc
+      - qcom,qcs615-system-noc
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+
+allOf:
+  - $ref: qcom,rpmh-common.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,qcs615-camnoc-virt
+              - qcom,qcs615-ipa-virt
+              - qcom,qcs615-mc-virt
+    then:
+      properties:
+        reg: false
+    else:
+      required:
+        - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    gem_noc: interconnect@9680000 {
+        compatible = "qcom,qcs615-gem-noc";
+        reg = <0x9680000 0x3e200>;
+        #interconnect-cells = <2>;
+        qcom,bcm-voters = <&apps_bcm_voter>;
+    };
+
+    mc_virt: interconnect-2 {
+        compatible = "qcom,qcs615-mc-virt";
+        #interconnect-cells = <2>;
+        qcom,bcm-voters = <&apps_bcm_voter>;
+    };
diff --git a/Documentation/devicetree/bindings/interconnect/qcom,qcs8300-rpmh.yaml b/Documentation/devicetree/bindings/interconnect/qcom,qcs8300-rpmh.yaml
new file mode 100644
index 000000000000..e9f528d6d9a8
--- /dev/null
+++ b/Documentation/devicetree/bindings/interconnect/qcom,qcs8300-rpmh.yaml
@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interconnect/qcom,qcs8300-rpmh.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm RPMh Network-On-Chip Interconnect on QCS8300
+
+maintainers:
+  - Raviteja Laggyshetty <quic_rlaggysh@quicinc.com>
+
+description: |
+  RPMh interconnect providers support system bandwidth requirements through
+  RPMh hardware accelerators known as Bus Clock Manager (BCM).
+
+  See also: include/dt-bindings/interconnect/qcom,qcs8300-rpmh.h
+
+properties:
+  compatible:
+    enum:
+      - qcom,qcs8300-aggre1-noc
+      - qcom,qcs8300-aggre2-noc
+      - qcom,qcs8300-clk-virt
+      - qcom,qcs8300-config-noc
+      - qcom,qcs8300-dc-noc
+      - qcom,qcs8300-gem-noc
+      - qcom,qcs8300-gpdsp-anoc
+      - qcom,qcs8300-lpass-ag-noc
+      - qcom,qcs8300-mc-virt
+      - qcom,qcs8300-mmss-noc
+      - qcom,qcs8300-nspa-noc
+      - qcom,qcs8300-pcie-anoc
+      - qcom,qcs8300-system-noc
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+
+allOf:
+  - $ref: qcom,rpmh-common.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,qcs8300-clk-virt
+              - qcom,qcs8300-mc-virt
+    then:
+      properties:
+        reg: false
+    else:
+      required:
+        - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    gem_noc: interconnect@9100000 {
+        compatible = "qcom,qcs8300-gem-noc";
+        reg = <0x9100000 0xf7080>;
+        #interconnect-cells = <2>;
+        qcom,bcm-voters = <&apps_bcm_voter>;
+    };
+
+    clk_virt: interconnect-0 {
+        compatible = "qcom,qcs8300-clk-virt";
+        #interconnect-cells = <2>;
+        qcom,bcm-voters = <&apps_bcm_voter>;
+    };
diff --git a/Documentation/devicetree/bindings/interconnect/qcom,sar2130p-rpmh.yaml b/Documentation/devicetree/bindings/interconnect/qcom,sar2130p-rpmh.yaml
new file mode 100644
index 000000000000..4647dac740e9
--- /dev/null
+++ b/Documentation/devicetree/bindings/interconnect/qcom,sar2130p-rpmh.yaml
@@ -0,0 +1,117 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interconnect/qcom,sar2130p-rpmh.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm RPMh Network-On-Chip Interconnect on SAR2130P
+
+maintainers:
+  - Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
+  - Georgi Djakov <djakov@kernel.org>
+
+description: |
+  RPMh interconnect providers support system bandwidth requirements through
+  RPMh hardware accelerators known as Bus Clock Manager (BCM). The provider is
+  able to communicate with the BCM through the Resource State Coordinator (RSC)
+  associated with each execution environment. Provider nodes must point to at
+  least one RPMh device child node pertaining to their RSC and each provider
+  can map to multiple RPMh resources.
+
+  See also:: include/dt-bindings/interconnect/qcom,sar2130p-rpmh.h
+
+properties:
+  compatible:
+    enum:
+      - qcom,sar2130p-clk-virt
+      - qcom,sar2130p-config-noc
+      - qcom,sar2130p-gem-noc
+      - qcom,sar2130p-lpass-ag-noc
+      - qcom,sar2130p-mc-virt
+      - qcom,sar2130p-mmss-noc
+      - qcom,sar2130p-nsp-noc
+      - qcom,sar2130p-pcie-anoc
+      - qcom,sar2130p-system-noc
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+
+required:
+  - compatible
+
+allOf:
+  - $ref: qcom,rpmh-common.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sar2130p-clk-virt
+              - qcom,sar2130p-mc-virt
+    then:
+      properties:
+        reg: false
+    else:
+      required:
+        - reg
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sar2130p-pcie-anoc
+    then:
+      properties:
+        clocks:
+          items:
+            - description: aggre-NOC PCIe AXI clock
+            - description: cfg-NOC PCIe a-NOC AHB clock
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sar2130p-system-noc
+    then:
+      properties:
+        clocks:
+          items:
+            - description: aggre USB3 PRIM AXI clock
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sar2130p-system-noc
+              - qcom,sar2130p-pcie-anoc
+    then:
+      required:
+        - clocks
+    else:
+      properties:
+        clocks: false
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    clk_virt: interconnect-0 {
+      compatible = "qcom,sar2130p-clk-virt";
+      #interconnect-cells = <2>;
+      qcom,bcm-voters = <&apps_bcm_voter>;
+    };
+
+    aggre1_noc: interconnect@1680000 {
+      compatible = "qcom,sar2130p-system-noc";
+      reg = <0x01680000 0x29080>;
+      #interconnect-cells = <2>;
+      clocks = <&gcc_prim_axi_clk>;
+      qcom,bcm-voters = <&apps_bcm_voter>;
+    };
diff --git a/Documentation/devicetree/bindings/fuse/renesas,rcar-efuse.yaml b/Documentation/devicetree/bindings/nvmem/renesas,rcar-efuse.yaml
index d7e289244e72..ce7d65afa460 100644
--- a/Documentation/devicetree/bindings/fuse/renesas,rcar-efuse.yaml
+++ b/Documentation/devicetree/bindings/nvmem/renesas,rcar-efuse.yaml
@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: http://devicetree.org/schemas/fuse/renesas,rcar-efuse.yaml#
+$id: http://devicetree.org/schemas/nvmem/renesas,rcar-efuse.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: R-Car E-FUSE connected to PFC
@@ -13,6 +13,9 @@ description:
   The E-FUSE is a type of non-volatile memory, which is accessible through the
   Pin Function Controller (PFC) on some R-Car Gen4 SoCs.
 
+allOf:
+  - $ref: nvmem.yaml#
+
 properties:
   compatible:
     enum:
@@ -39,17 +42,27 @@ required:
   - power-domains
   - resets
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
-    #include <dt-bindings/clock/r8a779a0-cpg-mssr.h>
-    #include <dt-bindings/power/r8a779a0-sysc.h>
-
-    fuse: fuse@e6078800 {
-            compatible = "renesas,r8a779a0-efuse";
-            reg = <0xe6078800 0x100>;
-            clocks = <&cpg CPG_MOD 916>;
-            power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
-            resets = <&cpg 916>;
+    #include <dt-bindings/clock/r8a779f0-cpg-mssr.h>
+    #include <dt-bindings/power/r8a779f0-sysc.h>
+
+    fuse@e6078800 {
+        compatible = "renesas,r8a779f0-efuse";
+        reg = <0xe6078800 0x200>;
+        clocks = <&cpg CPG_MOD 915>;
+        power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>;
+        resets = <&cpg 915>;
+
+        nvmem-layout {
+            compatible = "fixed-layout";
+            #address-cells = <1>;
+            #size-cells = <1>;
+
+            calib@144 {
+                reg = <0x144 0x08>;
+            };
+        };
     };
diff --git a/Documentation/devicetree/bindings/fuse/renesas,rcar-otp.yaml b/Documentation/devicetree/bindings/nvmem/renesas,rcar-otp.yaml
index d74872ae9ff3..3313c03ea68d 100644
--- a/Documentation/devicetree/bindings/fuse/renesas,rcar-otp.yaml
+++ b/Documentation/devicetree/bindings/nvmem/renesas,rcar-otp.yaml
@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: http://devicetree.org/schemas/fuse/renesas,rcar-otp.yaml#
+$id: http://devicetree.org/schemas/nvmem/renesas,rcar-otp.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: R-Car E-FUSE connected to OTP_MEM
@@ -13,6 +13,9 @@ description:
   The E-FUSE is a type of non-volatile memory, which is accessible through the
   One-Time Programmable Memory (OTP_MEM) module on some R-Car Gen4 SoCs.
 
+allOf:
+  - $ref: nvmem.yaml#
+
 properties:
   compatible:
     enum:
@@ -22,17 +25,19 @@ properties:
   reg:
     items:
       - description: OTP_MEM_0
-      - description: OTP_MEM_1
+      - description: OTP_MEM_1.
+          The addresses of cells defined under the optional nvmem-layout
+          subnode are relative to this register bank.
 
 required:
   - compatible
   - reg
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
-    otp: otp@e61be000 {
-            compatible = "renesas,r8a779g0-otp";
-            reg = <0xe61be000 0x1000>, <0xe61bf000 0x1000>;
+    otp@e61be000 {
+        compatible = "renesas,r8a779g0-otp";
+        reg = <0xe61be000 0x1000>, <0xe61bf000 0x1000>;
     };
diff --git a/Documentation/devicetree/bindings/nvmem/sc27xx-efuse.txt b/Documentation/devicetree/bindings/nvmem/sc27xx-efuse.txt
deleted file mode 100644
index 586c08286aa9..000000000000
--- a/Documentation/devicetree/bindings/nvmem/sc27xx-efuse.txt
+++ /dev/null
@@ -1,52 +0,0 @@
-= Spreadtrum SC27XX PMIC eFuse device tree bindings =
-
-Required properties:
-- compatible: Should be one of the following.
-	"sprd,sc2720-efuse"
-	"sprd,sc2721-efuse"
-	"sprd,sc2723-efuse"
-	"sprd,sc2730-efuse"
-	"sprd,sc2731-efuse"
-- reg: Specify the address offset of efuse controller.
-- hwlocks: Reference to a phandle of a hwlock provider node.
-
-= Data cells =
-Are child nodes of eFuse, bindings of which as described in
-bindings/nvmem/nvmem.txt
-
-Example:
-
-	sc2731_pmic: pmic@0 {
-		compatible = "sprd,sc2731";
-		reg = <0>;
-		spi-max-frequency = <26000000>;
-		interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		efuse@380 {
-			compatible = "sprd,sc2731-efuse";
-			reg = <0x380>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			hwlocks = <&hwlock 12>;
-
-			/* Data cells */
-			thermal_calib: calib@10 {
-				reg = <0x10 0x2>;
-			};
-		};
-	};
-
-= Data consumers =
-Are device nodes which consume nvmem data cells.
-
-Example:
-
-	thermal {
-		...
-		nvmem-cells = <&thermal_calib>;
-		nvmem-cell-names = "calibration";
-	};
diff --git a/Documentation/devicetree/bindings/nvmem/sprd,sc2731-efuse.yaml b/Documentation/devicetree/bindings/nvmem/sprd,sc2731-efuse.yaml
new file mode 100644
index 000000000000..dc25fe3d1841
--- /dev/null
+++ b/Documentation/devicetree/bindings/nvmem/sprd,sc2731-efuse.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/nvmem/sprd,sc2731-efuse.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Spreadtrum SC27XX PMIC eFuse
+
+maintainers:
+  - Orson Zhai <orsonzhai@gmail.com>
+  - Baolin Wang <baolin.wang7@gmail.com>
+  - Chunyan Zhang <zhang.lyra@gmail.com>
+
+properties:
+  compatible:
+    enum:
+      - sprd,sc2720-efuse
+      - sprd,sc2721-efuse
+      - sprd,sc2723-efuse
+      - sprd,sc2730-efuse
+      - sprd,sc2731-efuse
+
+  reg:
+    maxItems: 1
+
+  hwlocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - hwlocks
+
+allOf:
+  - $ref: nvmem.yaml#
+  - $ref: nvmem-deprecated-cells.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    pmic {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      efuse@380 {
+        compatible = "sprd,sc2731-efuse";
+        reg = <0x380>;
+        hwlocks = <&hwlock 12>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        /* Data cells */
+        fgu_calib: calib@6 {
+          reg = <0x6 0x2>;
+          bits = <0 9>;
+        };
+
+        adc_big_scale: calib@24 {
+          reg = <0x24 0x2>;
+        };
+
+        adc_small_scale: calib@26 {
+          reg = <0x26 0x2>;
+        };
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/nvmem/sprd,ums312-efuse.yaml b/Documentation/devicetree/bindings/nvmem/sprd,ums312-efuse.yaml
new file mode 100644
index 000000000000..00e0fd1353a3
--- /dev/null
+++ b/Documentation/devicetree/bindings/nvmem/sprd,ums312-efuse.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/nvmem/sprd,ums312-efuse.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Spreadtrum UMS312 eFuse
+
+maintainers:
+  - Orson Zhai <orsonzhai@gmail.com>
+  - Baolin Wang <baolin.wang7@gmail.com>
+  - Chunyan Zhang <zhang.lyra@gmail.com>
+
+properties:
+  compatible:
+    const: sprd,ums312-efuse
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: enable
+
+  hwlocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - hwlocks
+
+allOf:
+  - $ref: nvmem.yaml#
+  - $ref: nvmem-deprecated-cells.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/sprd,ums512-clk.h>
+
+    efuse@32240000 {
+      compatible = "sprd,ums312-efuse";
+      reg = <0x32240000 0x10000>;
+      clocks = <&aonapb_gate CLK_EFUSE_EB>;
+      clock-names = "enable";
+      hwlocks = <&hwlock 8>;
+      #address-cells = <1>;
+      #size-cells = <1>;
+
+      /* Data cells */
+      thermal_calib: calib@10 {
+        reg = <0x10 0x2>;
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/nvmem/sprd-efuse.txt b/Documentation/devicetree/bindings/nvmem/sprd-efuse.txt
deleted file mode 100644
index 96b6feec27f0..000000000000
--- a/Documentation/devicetree/bindings/nvmem/sprd-efuse.txt
+++ /dev/null
@@ -1,39 +0,0 @@
-= Spreadtrum eFuse device tree bindings =
-
-Required properties:
-- compatible: Should be "sprd,ums312-efuse".
-- reg: Specify the address offset of efuse controller.
-- clock-names: Should be "enable".
-- clocks: The phandle and specifier referencing the controller's clock.
-- hwlocks: Reference to a phandle of a hwlock provider node.
-
-= Data cells =
-Are child nodes of eFuse, bindings of which as described in
-bindings/nvmem/nvmem.txt
-
-Example:
-
-	ap_efuse: efuse@32240000 {
-		compatible = "sprd,ums312-efuse";
-		reg = <0 0x32240000 0 0x10000>;
-		clock-names = "enable";
-		hwlocks = <&hwlock 8>;
-		clocks = <&aonapb_gate CLK_EFUSE_EB>;
-
-		/* Data cells */
-		thermal_calib: calib@10 {
-			reg = <0x10 0x2>;
-		};
-	};
-
-= Data consumers =
-Are device nodes which consume nvmem data cells.
-
-Example:
-
-	thermal {
-		...
-
-		nvmem-cells = <&thermal_calib>;
-		nvmem-cell-names = "calibration";
-	};
diff --git a/Documentation/devicetree/bindings/nvmem/zii,rave-sp-eeprom.txt b/Documentation/devicetree/bindings/nvmem/zii,rave-sp-eeprom.txt
deleted file mode 100644
index 0df79d9e07ec..000000000000
--- a/Documentation/devicetree/bindings/nvmem/zii,rave-sp-eeprom.txt
+++ /dev/null
@@ -1,40 +0,0 @@
-Zodiac Inflight Innovations RAVE EEPROM Bindings
-
-RAVE SP EEPROM device is a "MFD cell" device exposing physical EEPROM
-attached to RAVE Supervisory Processor. It is expected that its Device
-Tree node is specified as a child of the node corresponding to the
-parent RAVE SP device (as documented in
-Documentation/devicetree/bindings/mfd/zii,rave-sp.txt)
-
-Required properties:
-
-- compatible: Should be "zii,rave-sp-eeprom"
-
-Optional properties:
-
-- zii,eeprom-name: Unique EEPROM identifier describing its function in the
-  system. Will be used as created NVMEM deivce's name.
-
-Data cells:
-
-Data cells are child nodes of eerpom node, bindings for which are
-documented in Documentation/devicetree/bindings/nvmem/nvmem.txt
-
-Example:
-
-	rave-sp {
-		compatible = "zii,rave-sp-rdu1";
-		current-speed = <38400>;
-
-		eeprom@a4 {
-			compatible = "zii,rave-sp-eeprom";
-			reg = <0xa4 0x4000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			zii,eeprom-name = "main-eeprom";
-
-			wdt_timeout: wdt-timeout@81 {
-				reg = <0x81 2>;
-			};
-		};
-	}
diff --git a/Documentation/devicetree/bindings/nvmem/zii,rave-sp-eeprom.yaml b/Documentation/devicetree/bindings/nvmem/zii,rave-sp-eeprom.yaml
new file mode 100644
index 000000000000..d073c51c2b9a
--- /dev/null
+++ b/Documentation/devicetree/bindings/nvmem/zii,rave-sp-eeprom.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/nvmem/zii,rave-sp-eeprom.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Zodiac Inflight Innovations RAVE EEPROM
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>
+
+description:
+  RAVE SP EEPROM device is a "MFD cell" device exposing physical EEPROM
+  attached to RAVE Supervisory Processor. It is expected that its Device
+  Tree node is specified as a child of the node corresponding to the
+  parent RAVE SP device (as documented in
+  Documentation/devicetree/bindings/mfd/zii,rave-sp.yaml)
+
+properties:
+  compatible:
+    const: zii,rave-sp-eeprom
+
+  reg:
+    maxItems: 1
+
+  zii,eeprom-name:
+    $ref: /schemas/types.yaml#/definitions/string
+    description:
+      Unique EEPROM identifier describing its function in the
+      system. Will be used as created NVMEM deivce's name.
+
+required:
+  - compatible
+
+allOf:
+  - $ref: nvmem.yaml#
+  - $ref: nvmem-deprecated-cells.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    eeprom@a4 {
+        compatible = "zii,rave-sp-eeprom";
+        reg = <0xa4 0x4000>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        zii,eeprom-name = "main-eeprom";
+
+        wdt-timeout@81 {
+            reg = <0x81 2>;
+        };
+    };
+
diff --git a/Documentation/devicetree/bindings/spmi/mtk,spmi-mtk-pmif.yaml b/Documentation/devicetree/bindings/spmi/mtk,spmi-mtk-pmif.yaml
index ac99883a3f29..7f0be0ac644a 100644
--- a/Documentation/devicetree/bindings/spmi/mtk,spmi-mtk-pmif.yaml
+++ b/Documentation/devicetree/bindings/spmi/mtk,spmi-mtk-pmif.yaml
@@ -25,6 +25,7 @@ properties:
       - items:
           - enum:
               - mediatek,mt8186-spmi
+              - mediatek,mt8188-spmi
           - const: mediatek,mt8195-spmi
 
   reg:
diff --git a/Documentation/devicetree/bindings/spmi/qcom,x1e80100-spmi-pmic-arb.yaml b/Documentation/devicetree/bindings/spmi/qcom,x1e80100-spmi-pmic-arb.yaml
index a28b70fb330a..7c3cc20a80d6 100644
--- a/Documentation/devicetree/bindings/spmi/qcom,x1e80100-spmi-pmic-arb.yaml
+++ b/Documentation/devicetree/bindings/spmi/qcom,x1e80100-spmi-pmic-arb.yaml
@@ -19,7 +19,11 @@ description: |
 
 properties:
   compatible:
-    const: qcom,x1e80100-spmi-pmic-arb
+    oneOf:
+      - items:
+          - const: qcom,sar2130p-spmi-pmic-arb
+          - const: qcom,x1e80100-spmi-pmic-arb
+      - const: qcom,x1e80100-spmi-pmic-arb
 
   reg:
     items:
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml
index 715663b450f8..da01616802c7 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.yaml
+++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml
@@ -83,6 +83,8 @@ patternProperties:
     description: ALFA Network Inc.
   "^allegro,.*":
     description: Allegro DVT
+  "^allegromicro,.*":
+    description: Allegro MicroSystems, Inc.
   "^alliedvision,.*":
     description: Allied Vision Technologies GmbH
   "^allo,.*":
@@ -565,6 +567,8 @@ patternProperties:
     description: GE Fanuc Intelligent Platforms Embedded Systems, Inc.
   "^GEFanuc,.*":
     description: GE Fanuc Intelligent Platforms Embedded Systems, Inc.
+  "^gehc,.*":
+    description: GE HealthCare
   "^gemei,.*":
     description: Gemei Digital Technology Co., Ltd.
   "^gemtek,.*":