Merge tag 'thermal-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull thermal control updates from Rafael Wysocki:
 "These further rework the ACPI thermal driver, after the changes made
  to it in the previous cycle, to make it easier to grasp, get rid of
  redundant pieces of internal data structures and eliminate its
  reliance on a specific ordering of trip point objects in the thermal
  core, make thermal core adjustments needed for the ACPI thermal driver
  rework, modify the thermal governor interface so as to use trip
  pointers for representing trip points in it, switch over multiple
  thermal drivers to using void platform driver remove callbacks, add
  support for 2 hardware features to the Intel int340x thermal driver,
  add support for new hardware on ARM platforms, update documentation,
  fix problems, clean up code and update the MAINTAINERS record for
  thermal control.

  Specifics:

   - Untangle the initialization and updates of passive and active trip
     points in the ACPI thermal driver (Rafael Wysocki)

   - Reduce code duplication related to the initialization and updates
     of trip points in the ACPI thermal driver (Rafael Wysocki)

   - Use trip pointers for cooling device binding in the ACPI thermal
     driver (Rafael Wysocki)

   - Simplify critical and hot trips representation in the ACPI thermal
     driver (Rafael Wysocki)

   - Use trip pointers in thermal governors and in the related part of
     the thermal core (Rafael Wysocki)

   - Drop the trips_disabled bitmask that has become redundant from the
     thermal core (Rafael Wysocki)

   - Avoid updating trip points when the thermal zone temperature falls
     into a trip point's hysteresis range (ícolas F. R. A. Prado)

   - Add power floor notifications support to the int340x thermal
     control driver (Srinivas Pandruvada)

   - Rework updating trip points in the int340x thermal driver so that
     it does not access thermal zone internals directly (Rafael
     Wysocki)

   - Use param_get_byte() instead of param_get_int() as the max_idle
     module parameter .get() callback in the Intel powerclamp thermal
     driver to avoid possible out-of-bounds access (David Arcari)

   - Add workload hints support to the int340x thermal driver (Srinivas
     Pandruvada)

   - Add support for Mediatek LVTS MT8192 along with suspend/resume
     routines (Balsam Chihi)

   - Fix probe for THERMAL_V2 in the Mediatek LVTS driver (Markus
     Schneider-Pargmann)

   - Remove duplicate error message from the max76620 driver when
     thermal_of_zone_register() fails (Thierry Reding)

   - Add i.MX7D compatible bindings to fix a warning from dtbs_check for
     the imx6ul platform (Alexander Stein)

   - Add sa8775p compatible to the QCom tsens driver (Priyansh Jain)

   - Fix error check in lvts_debugfs_init() to be against PTR_ERR() in
     the LVTS Mediatek driver (Minjie Du)

   - Remove unused variable in thermal/tools (Kuan-Wei Chiu)

   - Document the imx8dl thermal sensor (Fabio Estevam)

   - Add variable names in callback prototypes to prevent warning from
     checkpatch.pl in the imx8mm driver (Bragatheswaran Manickavel)

   - Add missing unevaluatedProperties on child node schemas for
     tegra124 (Rob Herring)

   - Add mt7988 support to the Mediatek LVTS driver (Frank Wunderlich)"

* tag 'thermal-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (111 commits)
  thermal: ACPI: Include the right header file
  thermal: core: Don't update trip points inside the hysteresis range
  thermal: core: Pass trip pointer to governor throttle callback
  thermal: gov_step_wise: Fold update_passive_instance() into its caller
  thermal: gov_power_allocator: Use trip pointers instead of trip indices
  thermal: gov_fair_share: Rearrange get_trip_level()
  thermal: trip: Define for_each_trip() macro
  thermal: trip: Simplify computing trip indices
  thermal/qcom/tsens: Drop ops_v0_1
  thermal/drivers/mediatek/lvts_thermal: Update calibration data documentation
  thermal/drivers/mediatek/lvts_thermal: Add mt8192 support
  thermal/drivers/mediatek/lvts_thermal: Add suspend and resume
  dt-bindings: thermal: mediatek: Add LVTS thermal controller definition for mt8192
  thermal/drivers/mediatek: Fix probe for THERMAL_V2
  thermal/drivers/max77620: Remove duplicate error message
  dt-bindings: timer: add imx7d compatible
  dt-bindings: net: microchip: Allow nvmem-cell usage
  dt-bindings: imx-thermal: Add #thermal-sensor-cells property
  dt-bindings: thermal: tsens: Add sa8775p compatible
  thermal/drivers/mediatek/lvts_thermal: Fix error check in lvts_debugfs_init()
  ...

8 files changed, 23 insertions, 3 deletions

diff --git a/Documentation/devicetree/bindings/net/microchip,lan95xx.yaml b/Documentation/devicetree/bindings/net/microchip,lan95xx.yaml
index 77c9bbf987e1..accff93d38f8 100644
--- a/Documentation/devicetree/bindings/net/microchip,lan95xx.yaml
+++ b/Documentation/devicetree/bindings/net/microchip,lan95xx.yaml
@@ -44,6 +44,8 @@ properties:
 
   local-mac-address: true
   mac-address: true
+  nvmem-cells: true
+  nvmem-cell-names: true
 
 required:
   - compatible
diff --git a/Documentation/devicetree/bindings/thermal/fsl,scu-thermal.yaml b/Documentation/devicetree/bindings/thermal/fsl,scu-thermal.yaml
index 3721c8c8ec64..e02d04d4f71e 100644
--- a/Documentation/devicetree/bindings/thermal/fsl,scu-thermal.yaml
+++ b/Documentation/devicetree/bindings/thermal/fsl,scu-thermal.yaml
@@ -18,7 +18,9 @@ allOf:
 properties:
   compatible:
     items:
-      - const: fsl,imx8qxp-sc-thermal
+      - enum:
+          - fsl,imx8dxl-sc-thermal
+          - fsl,imx8qxp-sc-thermal
       - const: fsl,imx-sc-thermal
 
   '#thermal-sensor-cells':
diff --git a/Documentation/devicetree/bindings/thermal/imx-thermal.yaml b/Documentation/devicetree/bindings/thermal/imx-thermal.yaml
index 3aecea77869f..808d987bd8d1 100644
--- a/Documentation/devicetree/bindings/thermal/imx-thermal.yaml
+++ b/Documentation/devicetree/bindings/thermal/imx-thermal.yaml
@@ -60,6 +60,9 @@ properties:
   clocks:
     maxItems: 1
 
+  "#thermal-sensor-cells":
+    const: 0
+
 required:
   - compatible
   - interrupts
@@ -67,6 +70,9 @@ required:
   - nvmem-cells
   - nvmem-cell-names
 
+allOf:
+  - $ref: thermal-sensor.yaml#
+
 additionalProperties: false
 
 examples:
@@ -104,5 +110,6 @@ examples:
              nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>;
              nvmem-cell-names = "calib", "temp_grade";
              clocks = <&clks IMX6SX_CLK_PLL3_USB_OTG>;
+             #thermal-sensor-cells = <0>;
         };
     };
diff --git a/Documentation/devicetree/bindings/thermal/mediatek,lvts-thermal.yaml b/Documentation/devicetree/bindings/thermal/mediatek,lvts-thermal.yaml
index fe9ae4c425c0..e6665af52ee6 100644
--- a/Documentation/devicetree/bindings/thermal/mediatek,lvts-thermal.yaml
+++ b/Documentation/devicetree/bindings/thermal/mediatek,lvts-thermal.yaml
@@ -18,6 +18,7 @@ description: |
 properties:
   compatible:
     enum:
+      - mediatek,mt7988-lvts-ap
       - mediatek,mt8192-lvts-ap
       - mediatek,mt8192-lvts-mcu
       - mediatek,mt8195-lvts-ap
diff --git a/Documentation/devicetree/bindings/thermal/nvidia,tegra124-soctherm.yaml b/Documentation/devicetree/bindings/thermal/nvidia,tegra124-soctherm.yaml
index 04a2ba1aa946..b0237d236021 100644
--- a/Documentation/devicetree/bindings/thermal/nvidia,tegra124-soctherm.yaml
+++ b/Documentation/devicetree/bindings/thermal/nvidia,tegra124-soctherm.yaml
@@ -68,7 +68,12 @@ properties:
     patternProperties:
       "^(light|heavy|oc1)$":
         type: object
+        additionalProperties: false
+
         properties:
+          "#cooling-cells":
+            const: 2
+
           nvidia,priority:
             $ref: /schemas/types.yaml#/definitions/uint32
             minimum: 1
diff --git a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
index 27e9e16e6455..437b74732886 100644
--- a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
+++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
@@ -51,6 +51,7 @@ properties:
               - qcom,msm8996-tsens
               - qcom,msm8998-tsens
               - qcom,qcm2290-tsens
+              - qcom,sa8775p-tsens
               - qcom,sc7180-tsens
               - qcom,sc7280-tsens
               - qcom,sc8180x-tsens
diff --git a/Documentation/devicetree/bindings/thermal/thermal-zones.yaml b/Documentation/devicetree/bindings/thermal/thermal-zones.yaml
index 4f3acdc4dec0..4a8dabc48170 100644
--- a/Documentation/devicetree/bindings/thermal/thermal-zones.yaml
+++ b/Documentation/devicetree/bindings/thermal/thermal-zones.yaml
@@ -8,7 +8,7 @@ $schema: http://devicetree.org/meta-schemas/base.yaml#
 title: Thermal zone
 
 maintainers:
-  - Amit Kucheria <amitk@kernel.org>
+  - Daniel Lezcano <daniel.lezcano@linaro.org>
 
 description: |
   Thermal management is achieved in devicetree by describing the sensor hardware
diff --git a/Documentation/devicetree/bindings/timer/fsl,imxgpt.yaml b/Documentation/devicetree/bindings/timer/fsl,imxgpt.yaml
index dbe1267af06a..c5d3be8c1d68 100644
--- a/Documentation/devicetree/bindings/timer/fsl,imxgpt.yaml
+++ b/Documentation/devicetree/bindings/timer/fsl,imxgpt.yaml
@@ -36,7 +36,9 @@ properties:
               - fsl,imxrt1170-gpt
           - const: fsl,imx6dl-gpt
       - items:
-          - const: fsl,imx6ul-gpt
+          - enum:
+              - fsl,imx6ul-gpt
+              - fsl,imx7d-gpt
           - const: fsl,imx6sx-gpt
 
   reg: