Merge tag 'soc-dt-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull SoC devicetree updates from Arnd Bergmann:
 "New SoC support for Broadcom bcm2712 (Raspberry Pi 5) and Renesas
  R9A09G057 (RZ/V2H(P)) and Qualcomm Snapdragon 414 (MSM8929), all three
  of these are variants of already supported chips, in particular the
  last one is almost identical to MSM8939.

  Lots of updates to Mediatek, ASpeed, Rockchips, Amlogic, Qualcomm,
  STM32, NXP i.MX, Sophgo, TI K3, Renesas, Microchip at91, NVIDIA Tegra,
  and T-HEAD.

  The added Qualcomm platform support once again dominates the changes,
  with seven phones and three laptops getting added in addition to many
  new features on existing machines. The Snapdragon X1E support
  specifically keeps improving.

  The other new machines are:

   - eight new machines using various 64-bit Rockchips SoCs, both on the
     consumer/gaming side and developer boards

   - three industrial boards with 64-bit i.MX, which is a very low
     number for them.

   - four more servers using a 32-bit Speed BMC

   - three boards using STM32MP1 SoCs

   - one new machine each using allwinner, amlogic, broadcom and renesas
     chips"

* tag 'soc-dt-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (672 commits)
  arm64: dts: allwinner: h5: NanoPi NEO Plus2: Use regulators for pio
  arm64: dts: mediatek: add audio support for mt8365-evk
  arm64: dts: mediatek: add afe support for mt8365 SoC
  arm64: dts: mediatek: mt8186-corsola: Disable DPI display interface
  arm64: dts: mediatek: mt8186: Add svs node
  arm64: dts: mediatek: mt8186: Add power domain for DPI
  arm64: dts: mediatek: mt8195: Correct clock order for dp_intf*
  arm64: dts: mt8183: add dpi node to mt8183
  arm64: dts: allwinner: h5: NanoPi Neo Plus2: Fix regulators
  arm64: dts: rockchip: add CAN0 and CAN1 interfaces to mecsbc board
  arm64: dts: rockchip: add CAN-FD controller nodes to rk3568
  arm64: dts: nuvoton: ma35d1: Add uart pinctrl settings
  arm64: dts: nuvoton: ma35d1: Add pinctrl and gpio nodes
  arm64: dts: nuvoton: Add syscon to the system-management node
  ARM: dts: Fix undocumented LM75 compatible nodes
  arm64: dts: toshiba: Fix pl011 and pl022 clocks
  ARM: dts: stm32: Use SAI to generate bit and frame clock on STM32MP15xx DHCOM PDK2
  ARM: dts: stm32: Switch bitclock/frame-master to flag on STM32MP15xx DHCOM PDK2
  ARM: dts: stm32: Sort properties in audio endpoints on STM32MP15xx DHCOM PDK2
  ARM: dts: stm32: Add MECIO1 and MECT1S board variants
  ...

31 files changed, 983 insertions, 255 deletions

diff --git a/Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml b/Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml
index 95113df178cc..2f92b8ab08fa 100644
--- a/Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml
+++ b/Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml
@@ -79,6 +79,7 @@ properties:
               - aspeed,ast2600-evb-a1
               - asus,x4tf-bmc
               - facebook,bletchley-bmc
+              - facebook,catalina-bmc
               - facebook,cloudripper-bmc
               - facebook,elbert-bmc
               - facebook,fuji-bmc
@@ -86,7 +87,9 @@ properties:
               - facebook,harma-bmc
               - facebook,minerva-cmc
               - facebook,yosemite4-bmc
+              - ibm,blueridge-bmc
               - ibm,everest-bmc
+              - ibm,fuji-bmc
               - ibm,rainier-bmc
               - ibm,system1-bmc
               - ibm,tacoma-bmc
diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml
index 80747d79418a..b39a7e031177 100644
--- a/Documentation/devicetree/bindings/arm/fsl.yaml
+++ b/Documentation/devicetree/bindings/arm/fsl.yaml
@@ -809,19 +809,19 @@ properties:
           - const: kontron,sl-imx6ull   # Kontron SL i.MX6ULL SoM
           - const: fsl,imx6ull
 
-      - description: TQ Systems TQMa6ULLx SoM on MBa6ULx board
+      - description: TQ-Systems TQMa6ULLx SoM on MBa6ULx board
         items:
           - enum:
-              - tq,imx6ull-tqma6ull2-mba6ulx
-          - const: tq,imx6ull-tqma6ull2      # MCIMX6Y2
+              - tq,imx6ull-tqma6ull2-mba6ulx # TQMa6ULL socketable SoM with MCIMX6Y2 on MBa6ULx EVK
+          - const: tq,imx6ull-tqma6ull2      # TQMa6ULL socketable SoM with MCIMX6Y2
           - const: fsl,imx6ull
 
-      - description: TQ Systems TQMa6ULLxL SoM on MBa6ULx[L] board
+      - description: TQ-Systems TQMa6ULLxL SoM on MBa6ULx[L] board
         items:
           - enum:
-              - tq,imx6ull-tqma6ull2l-mba6ulx # using LGA adapter
-              - tq,imx6ull-tqma6ull2l-mba6ulxl
-          - const: tq,imx6ull-tqma6ull2l      # MCIMX6Y2, LGA SoM variant
+              - tq,imx6ull-tqma6ull2l-mba6ulx  # TQMa6ULLxL LGA SoM with socketable Adapter on MBa6ULx EVK
+              - tq,imx6ull-tqma6ull2l-mba6ulxl # TQMa6ULLxL LGA SoM on MBa6ULxL gateway board
+          - const: tq,imx6ull-tqma6ull2l       # TQMa6ULLxL LGA SoM with MCIMX6Y2
           - const: fsl,imx6ull
 
       - description: Seeed Stuido i.MX6ULL SoM on dev boards
@@ -939,8 +939,8 @@ properties:
               - fsl,imx8mm-ddr4-evk       # i.MX8MM DDR4 EVK Board
               - fsl,imx8mm-evk            # i.MX8MM EVK Board
               - fsl,imx8mm-evkb           # i.MX8MM EVKB Board
+              - gateworks,imx8mm-gw75xx-0x # i.MX8MM Gateworks Board
               - gateworks,imx8mm-gw7904
-              - gateworks,imx8mm-gw7905-0x # i.MX8MM Gateworks Board
               - gw,imx8mm-gw71xx-0x       # i.MX8MM Gateworks Development Kit
               - gw,imx8mm-gw72xx-0x       # i.MX8MM Gateworks Development Kit
               - gw,imx8mm-gw73xx-0x       # i.MX8MM Gateworks Development Kit
@@ -953,7 +953,6 @@ properties:
               - toradex,verdin-imx8mm     # Verdin iMX8M Mini Modules
               - toradex,verdin-imx8mm-nonwifi  # Verdin iMX8M Mini Modules without Wi-Fi / BT
               - toradex,verdin-imx8mm-wifi  # Verdin iMX8M Mini Wi-Fi / BT Modules
-              - variscite,var-som-mx8mm   # i.MX8MM Variscite VAR-SOM-MX8MM module
               - prt,prt8mm                # i.MX8MM Protonic PRT8MM Board
           - const: fsl,imx8mm
 
@@ -1082,7 +1081,7 @@ properties:
               - gateworks,imx8mp-gw72xx-2x # i.MX8MP Gateworks Board
               - gateworks,imx8mp-gw73xx-2x # i.MX8MP Gateworks Board
               - gateworks,imx8mp-gw74xx   # i.MX8MP Gateworks Board
-              - gateworks,imx8mp-gw7905-2x # i.MX8MP Gateworks Board
+              - gateworks,imx8mp-gw75xx-2x # i.MX8MP Gateworks Board
               - skov,imx8mp-skov-revb-hdmi # SKOV i.MX8MP climate control without panel
               - skov,imx8mp-skov-revb-lt6 # SKOV i.MX8MP climate control with 7” panel
               - skov,imx8mp-skov-revb-mi1010ait-1cp1 # SKOV i.MX8MP climate control with 10.1" panel
@@ -1168,6 +1167,12 @@ properties:
           - const: tq,imx8mp-tqma8mpql            # TQ-Systems GmbH i.MX8MP TQMa8MPQL SOM
           - const: fsl,imx8mp
 
+      - description: Variscite VAR-SOM-MX8M Plus based boards
+        items:
+          - const: variscite,var-som-mx8mp-symphony
+          - const: variscite,var-som-mx8mp
+          - const: fsl,imx8mp
+
       - description: i.MX8MQ based Boards
         items:
           - enum:
@@ -1293,6 +1298,7 @@ properties:
           - enum:
               - fsl,imx93-9x9-qsb         # i.MX93 9x9 QSB Board
               - fsl,imx93-11x11-evk       # i.MX93 11x11 EVK Board
+              - fsl,imx93-14x14-evk       # i.MX93 14x14 EVK Board
           - const: fsl,imx93
 
       - description: i.MX95 based Boards
@@ -1344,6 +1350,12 @@ properties:
           - const: variscite,var-som-mx93
           - const: fsl,imx93
 
+      - description: Kontron OSM-S i.MX93 SoM based boards
+        items:
+          - const: kontron,imx93-bl-osm-s # Kontron BL i.MX93 OSM-S board
+          - const: kontron,imx93-osm-s    # Kontron OSM-S i.MX93 SoM
+          - const: fsl,imx93
+
       - description:
           Freescale Vybrid Platform Device Tree Bindings
 
@@ -1523,6 +1535,12 @@ properties:
               - fsl,ls2080a-rdb
           - const: fsl,ls2080a
 
+      - description: LS2081A based Boards
+        items:
+          - enum:
+              - fsl,ls2081a-rdb
+          - const: fsl,ls2081a
+
       - description: LS2088A based Boards
         items:
           - enum:
diff --git a/Documentation/devicetree/bindings/arm/qcom.yaml b/Documentation/devicetree/bindings/arm/qcom.yaml
index f08e13b61172..5cb54d69af0b 100644
--- a/Documentation/devicetree/bindings/arm/qcom.yaml
+++ b/Documentation/devicetree/bindings/arm/qcom.yaml
@@ -157,11 +157,18 @@ properties:
 
       - items:
           - enum:
+              - wingtech,wt82918hd
+          - const: qcom,msm8929
+
+      - items:
+          - enum:
               - huawei,kiwi
               - longcheer,l9100
               - samsung,a7
               - sony,kanuti-tulip
               - square,apq8039-t2
+              - wingtech,wt82918
+              - wingtech,wt82918hdhw39
           - const: qcom,msm8939
 
       - items:
@@ -228,12 +235,15 @@ properties:
               - samsung,grandprimelte
               - samsung,gt510
               - samsung,gt58
+              - samsung,j3ltetw
               - samsung,j5
               - samsung,j5x
               - samsung,rossa
               - samsung,serranove
               - thwc,uf896
               - thwc,ufi001c
+              - wingtech,wt86518
+              - wingtech,wt86528
               - wingtech,wt88047
               - yiming,uz801-v3
           - const: qcom,msm8916
@@ -250,6 +260,7 @@ properties:
       - items:
           - enum:
               - lg,bullhead
+              - lg,h815
               - microsoft,talkman
               - xiaomi,libra
           - const: qcom,msm8992
@@ -1040,8 +1051,16 @@ properties:
 
       - items:
           - enum:
+              - lenovo,thinkpad-t14s
+          - const: qcom,x1e78100
+          - const: qcom,x1e80100
+
+      - items:
+          - enum:
               - asus,vivobook-s15
               - lenovo,yoga-slim7x
+              - microsoft,romulus13
+              - microsoft,romulus15
               - qcom,x1e80100-crd
               - qcom,x1e80100-qcp
           - const: qcom,x1e80100
diff --git a/Documentation/devicetree/bindings/arm/rockchip.yaml b/Documentation/devicetree/bindings/arm/rockchip.yaml
index 1ef09fbfdfaf..687823e58c22 100644
--- a/Documentation/devicetree/bindings/arm/rockchip.yaml
+++ b/Documentation/devicetree/bindings/arm/rockchip.yaml
@@ -96,6 +96,13 @@ properties:
           - const: coolpi,pi-cm5
           - const: rockchip,rk3588
 
+      - description: Cool Pi CM5 GenBook
+        items:
+          - enum:
+              - coolpi,pi-cm5-genbook
+          - const: coolpi,pi-cm5
+          - const: rockchip,rk3588
+
       - description: Cool Pi 4 Model B
         items:
           - const: coolpi,pi-4b
@@ -148,6 +155,12 @@ properties:
           - const: engicam,px30-core
           - const: rockchip,px30
 
+      - description: Firefly Core-PX30-JD4 on MB-JD4-PX30 baseboard
+        items:
+          - const: firefly,px30-jd4-core-mb
+          - const: firefly,px30-jd4-core
+          - const: rockchip,px30
+
       - description: Firefly Firefly-RK3288
         items:
           - enum:
@@ -216,6 +229,7 @@ properties:
               - friendlyarm,nanopi-r2c
               - friendlyarm,nanopi-r2c-plus
               - friendlyarm,nanopi-r2s
+              - friendlyarm,nanopi-r2s-plus
           - const: rockchip,rk3328
 
       - description: FriendlyElec NanoPi4 series boards
@@ -243,9 +257,11 @@ properties:
               - friendlyarm,nanopi-r6s
           - const: rockchip,rk3588s
 
-      - description: FriendlyElec NanoPC T6
+      - description: FriendlyElec NanoPC T6 series boards
         items:
-          - const: friendlyarm,nanopc-t6
+          - enum:
+              - friendlyarm,nanopc-t6
+              - friendlyarm,nanopc-t6-lts
           - const: rockchip,rk3588
 
       - description: FriendlyElec CM3588-based boards
@@ -255,6 +271,11 @@ properties:
           - const: friendlyarm,cm3588
           - const: rockchip,rk3588
 
+      - description: GameForce Ace
+        items:
+          - const: gameforce,ace
+          - const: rockchip,rk3588s
+
       - description: GameForce Chi
         items:
           - const: gameforce,chi
@@ -581,9 +602,19 @@ properties:
 
       - description: Hardkernel Odroid M1
         items:
-          - const: rockchip,rk3568-odroid-m1
+          - const: hardkernel,odroid-m1
           - const: rockchip,rk3568
 
+      - description: Hardkernel Odroid M1S
+        items:
+          - const: hardkernel,odroid-m1s
+          - const: rockchip,rk3566
+
+      - description: Hardkernel Odroid M2
+        items:
+          - const: hardkernel,odroid-m2
+          - const: rockchip,rk3588s
+
       - description: Hugsun X99 TV Box
         items:
           - const: hugsun,x99
@@ -622,6 +653,11 @@ properties:
           - const: leez,p710
           - const: rockchip,rk3399
 
+      - description: LCKFB Taishan Pi RK3566
+        items:
+          - const: lckfb,tspi-rk3566
+          - const: rockchip,rk3566
+
       - description: Lunzn FastRhino R66S / R68S
         items:
           - enum:
diff --git a/Documentation/devicetree/bindings/arm/stm32/stm32.yaml b/Documentation/devicetree/bindings/arm/stm32/stm32.yaml
index 58099949e8f3..703d4b574398 100644
--- a/Documentation/devicetree/bindings/arm/stm32/stm32.yaml
+++ b/Documentation/devicetree/bindings/arm/stm32/stm32.yaml
@@ -54,6 +54,8 @@ properties:
       - description: ST STM32MP151 based Boards
         items:
           - enum:
+              - prt,mecio1r0 # Protonic MECIO1r0
+              - prt,mect1s   # Protonic MECT1S
               - prt,prtt1a   # Protonic PRTT1A
               - prt,prtt1c   # Protonic PRTT1C
               - prt,prtt1s   # Protonic PRTT1S
@@ -71,6 +73,12 @@ properties:
           - const: dh,stm32mp151a-dhcor-som
           - const: st,stm32mp151
 
+      - description: ST STM32MP153 based Boards
+        items:
+          - enum:
+              - prt,mecio1r1   # Protonic MECIO1r1
+          - const: st,stm32mp153
+
       - description: DH STM32MP153 DHCOM SoM based Boards
         items:
           - const: dh,stm32mp153c-dhcom-drc02
diff --git a/Documentation/devicetree/bindings/arm/sunxi.yaml b/Documentation/devicetree/bindings/arm/sunxi.yaml
index 09dc6f424986..4aa15f3668e0 100644
--- a/Documentation/devicetree/bindings/arm/sunxi.yaml
+++ b/Documentation/devicetree/bindings/arm/sunxi.yaml
@@ -61,14 +61,19 @@ properties:
           - const: anbernic,rg35xx-2024
           - const: allwinner,sun50i-h700
 
+      - description: Anbernic RG35XX H
+        items:
+          - const: anbernic,rg35xx-h
+          - const: allwinner,sun50i-h700
+
       - description: Anbernic RG35XX Plus
         items:
           - const: anbernic,rg35xx-plus
           - const: allwinner,sun50i-h700
 
-      - description: Anbernic RG35XX H
+      - description: Anbernic RG35XX SP
         items:
-          - const: anbernic,rg35xx-h
+          - const: anbernic,rg35xx-sp
           - const: allwinner,sun50i-h700
 
       - description: Amarula A64 Relic
diff --git a/Documentation/devicetree/bindings/arm/tegra.yaml b/Documentation/devicetree/bindings/arm/tegra.yaml
index 8fb4923517d0..2889fd0e6592 100644
--- a/Documentation/devicetree/bindings/arm/tegra.yaml
+++ b/Documentation/devicetree/bindings/arm/tegra.yaml
@@ -128,6 +128,48 @@ properties:
           - const: nvidia,tegra132
           - const: nvidia,tegra124
       - items:
+          - const: google,nyan-blaze-rev10
+          - const: google,nyan-blaze-rev9
+          - const: google,nyan-blaze-rev8
+          - const: google,nyan-blaze-rev7
+          - const: google,nyan-blaze-rev6
+          - const: google,nyan-blaze-rev5
+          - const: google,nyan-blaze-rev4
+          - const: google,nyan-blaze-rev3
+          - const: google,nyan-blaze-rev2
+          - const: google,nyan-blaze-rev1
+          - const: google,nyan-blaze-rev0
+          - const: google,nyan-blaze
+          - const: google,nyan
+          - const: nvidia,tegra124
+      - items:
+          - const: google,nyan-big-rev10
+          - const: google,nyan-big-rev9
+          - const: google,nyan-big-rev8
+          - const: google,nyan-big-rev7
+          - const: google,nyan-big-rev6
+          - const: google,nyan-big-rev5
+          - const: google,nyan-big-rev4
+          - const: google,nyan-big-rev3
+          - const: google,nyan-big-rev2
+          - const: google,nyan-big-rev1
+          - const: google,nyan-big-rev0
+          - const: google,nyan-big
+          - const: google,nyan
+          - const: nvidia,tegra124
+      - items:
+          - const: google,nyan-big-rev7
+          - const: google,nyan-big-rev6
+          - const: google,nyan-big-rev5
+          - const: google,nyan-big-rev4
+          - const: google,nyan-big-rev3
+          - const: google,nyan-big-rev2
+          - const: google,nyan-big-rev1
+          - const: google,nyan-big-rev0
+          - const: google,nyan-big
+          - const: google,nyan
+          - const: nvidia,tegra124
+      - items:
           - enum:
               - nvidia,darcy
               - nvidia,p2371-0000
diff --git a/Documentation/devicetree/bindings/arm/ti/k3.yaml b/Documentation/devicetree/bindings/arm/ti/k3.yaml
index 4d9c5fbb4c26..5df99e361c21 100644
--- a/Documentation/devicetree/bindings/arm/ti/k3.yaml
+++ b/Documentation/devicetree/bindings/arm/ti/k3.yaml
@@ -140,6 +140,7 @@ properties:
       - description: K3 J722S SoC and Boards
         items:
           - enum:
+              - beagle,am67a-beagley-ai
               - ti,j722s-evm
           - const: ti,j722s
 
diff --git a/Documentation/devicetree/bindings/clock/amlogic,c3-pll-clkc.yaml b/Documentation/devicetree/bindings/clock/amlogic,c3-pll-clkc.yaml
index 43de3c6fc1cf..700865cc9792 100644
--- a/Documentation/devicetree/bindings/clock/amlogic,c3-pll-clkc.yaml
+++ b/Documentation/devicetree/bindings/clock/amlogic,c3-pll-clkc.yaml
@@ -24,11 +24,13 @@ properties:
     items:
       - description: input top pll
       - description: input mclk pll
+      - description: input fix pll
 
   clock-names:
     items:
       - const: top
       - const: mclk
+      - const: fix
 
   "#clock-cells":
     const: 1
@@ -52,8 +54,9 @@ examples:
             compatible = "amlogic,c3-pll-clkc";
             reg = <0x0 0x8000 0x0 0x1a4>;
             clocks = <&scmi_clk 2>,
-                     <&scmi_clk 5>;
-            clock-names = "top", "mclk";
+                     <&scmi_clk 5>,
+                     <&scmi_clk 12>;
+            clock-names = "top", "mclk", "fix";
             #clock-cells = <1>;
         };
     };
diff --git a/Documentation/devicetree/bindings/clock/qcom,ipq5332-gcc.yaml b/Documentation/devicetree/bindings/clock/qcom,ipq5332-gcc.yaml
index adc30d84fa8f..9193de681de2 100644
--- a/Documentation/devicetree/bindings/clock/qcom,ipq5332-gcc.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,ipq5332-gcc.yaml
@@ -31,6 +31,8 @@ properties:
       - description: USB PCIE wrapper pipe clock source
 
   '#power-domain-cells': false
+  '#interconnect-cells':
+    const: 1
 
 required:
   - compatible
diff --git a/Documentation/devicetree/bindings/clock/qcom,sm4450-camcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sm4450-camcc.yaml
new file mode 100644
index 000000000000..f54ce865880d
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,sm4450-camcc.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,sm4450-camcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Camera Clock & Reset Controller on SM4450
+
+maintainers:
+  - Ajit Pandey <quic_ajipan@quicinc.com>
+  - Taniya Das <quic_tdas@quicinc.com>
+
+description: |
+  Qualcomm camera clock control module provides the clocks, resets and power
+  domains on SM4450
+
+  See also:: include/dt-bindings/clock/qcom,sm4450-camcc.h
+
+properties:
+  compatible:
+    const: qcom,sm4450-camcc
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: Camera AHB clock source from GCC
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+  '#power-domain-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - '#clock-cells'
+  - '#reset-cells'
+  - '#power-domain-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/clock/qcom,sm4450-gcc.h>
+    clock-controller@ade0000 {
+      compatible = "qcom,sm4450-camcc";
+      reg = <0x0ade0000 0x20000>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>,
+               <&gcc GCC_CAMERA_AHB_CLK>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,sm4450-dispcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sm4450-dispcc.yaml
new file mode 100644
index 000000000000..2aa05353eff1
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,sm4450-dispcc.yaml
@@ -0,0 +1,71 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,sm4450-dispcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Display Clock & Reset Controller on SM4450
+
+maintainers:
+  - Ajit Pandey <quic_ajipan@quicinc.com>
+  - Taniya Das <quic_tdas@quicinc.com>
+
+description: |
+  Qualcomm display clock control module provides the clocks, resets and power
+  domains on SM4450
+
+  See also:: include/dt-bindings/clock/qcom,sm4450-dispcc.h
+
+properties:
+  compatible:
+    const: qcom,sm4450-dispcc
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: Board active XO source
+      - description: Display AHB clock source from GCC
+      - description: sleep clock source
+      - description: Byte clock from DSI PHY0
+      - description: Pixel clock from DSI PHY0
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+  '#power-domain-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - '#clock-cells'
+  - '#reset-cells'
+  - '#power-domain-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/clock/qcom,sm4450-gcc.h>
+    clock-controller@af00000 {
+      compatible = "qcom,sm4450-dispcc";
+      reg = <0x0af00000 0x20000>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>,
+               <&rpmhcc RPMH_CXO_CLK_A>,
+               <&gcc GCC_DISP_AHB_CLK>,
+               <&sleep_clk>,
+               <&dsi0_phy_pll_out_byteclk>,
+               <&dsi0_phy_pll_out_dsiclk>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,sm8150-camcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sm8150-camcc.yaml
new file mode 100644
index 000000000000..5e9f62d7866c
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,sm8150-camcc.yaml
@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,sm8150-camcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Camera Clock & Reset Controller on SM8150
+
+maintainers:
+  - Satya Priya Kakitapalli <quic_skakitap@quicinc.com>
+
+description: |
+  Qualcomm camera clock control module provides the clocks, resets and
+  power domains on SM8150.
+
+  See also:: include/dt-bindings/clock/qcom,sm8150-camcc.h
+
+properties:
+  compatible:
+    const: qcom,sm8150-camcc
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: Camera AHB clock from GCC
+
+  power-domains:
+    maxItems: 1
+    description:
+      A phandle and PM domain specifier for the MMCX power domain.
+
+  required-opps:
+    maxItems: 1
+    description:
+      A phandle to an OPP node describing required MMCX performance point.
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+  '#power-domain-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - power-domains
+  - required-opps
+  - '#clock-cells'
+  - '#reset-cells'
+  - '#power-domain-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-sm8150.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+    clock-controller@ad00000 {
+      compatible = "qcom,sm8150-camcc";
+      reg = <0x0ad00000 0x10000>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>,
+               <&gcc GCC_CAMERA_AHB_CLK>;
+      power-domains = <&rpmhpd SM8150_MMCX>;
+      required-opps = <&rpmhpd_opp_low_svs>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,sm8450-gpucc.yaml b/Documentation/devicetree/bindings/clock/qcom,sm8450-gpucc.yaml
index d10bb002906e..2d2c59aa8c6b 100644
--- a/Documentation/devicetree/bindings/clock/qcom,sm8450-gpucc.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,sm8450-gpucc.yaml
@@ -14,6 +14,7 @@ description: |
   domains on Qualcomm SoCs.
 
   See also::
+    include/dt-bindings/clock/qcom,sm4450-gpucc.h
     include/dt-bindings/clock/qcom,sm8450-gpucc.h
     include/dt-bindings/clock/qcom,sm8550-gpucc.h
     include/dt-bindings/reset/qcom,sm8450-gpucc.h
@@ -23,6 +24,7 @@ description: |
 properties:
   compatible:
     enum:
+      - qcom,sm4450-gpucc
       - qcom,sm8450-gpucc
       - qcom,sm8550-gpucc
       - qcom,sm8650-gpucc
diff --git a/Documentation/devicetree/bindings/clock/renesas,rzv2h-cpg.yaml b/Documentation/devicetree/bindings/clock/renesas,rzv2h-cpg.yaml
new file mode 100644
index 000000000000..926c503bed1f
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/renesas,rzv2h-cpg.yaml
@@ -0,0 +1,80 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/renesas,rzv2h-cpg.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas RZ/V2H(P) Clock Pulse Generator (CPG)
+
+maintainers:
+  - Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
+
+description:
+  On Renesas RZ/V2H(P) SoCs, the CPG (Clock Pulse Generator) handles generation
+  and control of clock signals for the IP modules, generation and control of resets,
+  and control over booting, low power consumption and power supply domains.
+
+properties:
+  compatible:
+    const: renesas,r9a09g057-cpg
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: AUDIO_EXTAL clock input
+      - description: RTXIN clock input
+      - description: QEXTAL clock input
+
+  clock-names:
+    items:
+      - const: audio_extal
+      - const: rtxin
+      - const: qextal
+
+  '#clock-cells':
+    description: |
+      - For CPG core clocks, the two clock specifier cells must be "CPG_CORE"
+        and a core clock reference, as defined in
+        <dt-bindings/clock/renesas,r9a09g057-cpg.h>,
+      - For module clocks, the two clock specifier cells must be "CPG_MOD" and
+        a module number.  The module number is calculated as the CLKON register
+        offset index multiplied by 16, plus the actual bit in the register
+        used to turn the CLK ON. For example, for CGC_GIC_0_GICCLK, the
+        calculation is (1 * 16 + 3) = 0x13.
+    const: 2
+
+  '#power-domain-cells':
+    const: 0
+
+  '#reset-cells':
+    description:
+      The single reset specifier cell must be the reset number. The reset number
+      is calculated as the reset register offset index multiplied by 16, plus the
+      actual bit in the register used to reset the specific IP block. For example,
+      for SYS_0_PRESETN, the calculation is (3 * 16 + 0) = 0x30.
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+  - '#power-domain-cells'
+  - '#reset-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    clock-controller@10420000 {
+        compatible = "renesas,r9a09g057-cpg";
+        reg = <0x10420000 0x10000>;
+        clocks = <&audio_extal_clk>, <&rtxin_clk>, <&qextal_clk>;
+        clock-names = "audio_extal", "rtxin", "qextal";
+        #clock-cells = <2>;
+        #power-domain-cells = <0>;
+        #reset-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/samsung,exynosautov9-clock.yaml b/Documentation/devicetree/bindings/clock/samsung,exynosautov9-clock.yaml
index 55c4f94a14d1..32f39e543b36 100644
--- a/Documentation/devicetree/bindings/clock/samsung,exynosautov9-clock.yaml
+++ b/Documentation/devicetree/bindings/clock/samsung,exynosautov9-clock.yaml
@@ -35,6 +35,7 @@ properties:
       - samsung,exynosautov9-cmu-top
       - samsung,exynosautov9-cmu-busmc
       - samsung,exynosautov9-cmu-core
+      - samsung,exynosautov9-cmu-dpum
       - samsung,exynosautov9-cmu-fsys0
       - samsung,exynosautov9-cmu-fsys1
       - samsung,exynosautov9-cmu-fsys2
@@ -113,6 +114,24 @@ allOf:
       properties:
         compatible:
           contains:
+            const: samsung,exynosautov9-cmu-dpum
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (26 MHz)
+            - description: DPU Main bus clock (from CMU_TOP)
+
+        clock-names:
+          items:
+            - const: oscclk
+            - const: bus
+
+  - if:
+      properties:
+        compatible:
+          contains:
             const: samsung,exynosautov9-cmu-fsys0
 
     then:
diff --git a/Documentation/devicetree/bindings/clock/samsung,exynosautov920-clock.yaml b/Documentation/devicetree/bindings/clock/samsung,exynosautov920-clock.yaml
new file mode 100644
index 000000000000..3330b2727474
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/samsung,exynosautov920-clock.yaml
@@ -0,0 +1,162 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/samsung,exynosautov920-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung ExynosAuto v920 SoC clock controller
+
+maintainers:
+  - Sunyeal Hong <sunyeal.hong@samsung.com>
+  - Chanwoo Choi <cw00.choi@samsung.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
+  - Sylwester Nawrocki <s.nawrocki@samsung.com>
+
+description: |
+  ExynosAuto v920 clock controller is comprised of several CMU units, generating
+  clocks for different domains. Those CMU units are modeled as separate device
+  tree nodes, and might depend on each other. Root clocks in that clock tree are
+  two external clocks:: OSCCLK/XTCXO (38.4 MHz) and RTCCLK/XrtcXTI (32768 Hz).
+  The external OSCCLK must be defined as fixed-rate clock in dts.
+
+  CMU_TOP is a top-level CMU, where all base clocks are prepared using PLLs and
+  dividers; all other clocks of function blocks (other CMUs) are usually
+  derived from CMU_TOP.
+
+  Each clock is assigned an identifier and client nodes can use this identifier
+  to specify the clock which they consume. All clocks available for usage
+  in clock consumer nodes are defined as preprocessor macros in
+  'include/dt-bindings/clock/samsung,exynosautov920.h' header.
+
+properties:
+  compatible:
+    enum:
+      - samsung,exynosautov920-cmu-top
+      - samsung,exynosautov920-cmu-peric0
+      - samsung,exynosautov920-cmu-peric1
+      - samsung,exynosautov920-cmu-misc
+      - samsung,exynosautov920-cmu-hsi0
+      - samsung,exynosautov920-cmu-hsi1
+
+  clocks:
+    minItems: 1
+    maxItems: 4
+
+  clock-names:
+    minItems: 1
+    maxItems: 4
+
+  "#clock-cells":
+    const: 1
+
+  reg:
+    maxItems: 1
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynosautov920-cmu-top
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (38.4 MHz)
+
+        clock-names:
+          items:
+            - const: oscclk
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - samsung,exynosautov920-cmu-peric0
+              - samsung,exynosautov920-cmu-peric1
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (38.4 MHz)
+            - description: CMU_PERICn NOC clock (from CMU_TOP)
+            - description: CMU_PERICn IP clock (from CMU_TOP)
+
+        clock-names:
+          items:
+            - const: oscclk
+            - const: noc
+            - const: ip
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - samsung,exynosautov920-cmu-misc
+            - samsung,exynosautov920-cmu-hsi0
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (38.4 MHz)
+            - description: CMU_MISC/CMU_HSI0 NOC clock (from CMU_TOP)
+
+        clock-names:
+          items:
+            - const: oscclk
+            - const: noc
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynosautov920-cmu-hsi1
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (38.4 MHz)
+            - description: CMU_HSI1 NOC clock (from CMU_TOP)
+            - description: CMU_HSI1 USBDRD clock (from CMU_TOP)
+            - description: CMU_HSI1 MMC_CARD clock (from CMU_TOP)
+
+        clock-names:
+          items:
+            - const: oscclk
+            - const: noc
+            - const: usbdrd
+            - const: mmc_card
+
+required:
+  - compatible
+  - "#clock-cells"
+  - clocks
+  - clock-names
+  - reg
+
+additionalProperties: false
+
+examples:
+  # Clock controller node for CMU_PERIC0
+  - |
+    #include <dt-bindings/clock/samsung,exynosautov920.h>
+
+    cmu_peric0: clock-controller@10800000 {
+        compatible = "samsung,exynosautov920-cmu-peric0";
+        reg = <0x10800000 0x8000>;
+        #clock-cells = <1>;
+
+        clocks = <&xtcxo>,
+                 <&cmu_top DOUT_CLKCMU_PERIC0_NOC>,
+                 <&cmu_top DOUT_CLKCMU_PERIC0_IP>;
+        clock-names = "oscclk",
+                      "noc",
+                      "ip";
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2836-l1-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2836-l1-intc.txt
deleted file mode 100644
index 8ced1696c325..000000000000
--- a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2836-l1-intc.txt
+++ /dev/null
@@ -1,37 +0,0 @@
-BCM2836 per-CPU interrupt controller
-
-The BCM2836 has a per-cpu interrupt controller for the timer, PMU
-events, and SMP IPIs.  One of the CPUs may receive interrupts for the
-peripheral (GPU) events, which chain to the BCM2835-style interrupt
-controller.
-
-Required properties:
-
-- compatible:	 	Should be "brcm,bcm2836-l1-intc"
-- reg:			Specifies base physical address and size of the
-			  registers
-- interrupt-controller:	Identifies the node as an interrupt controller
-- #interrupt-cells:	Specifies the number of cells needed to encode an
-			  interrupt source. The value shall be 2
-
-Please refer to interrupts.txt in this directory for details of the common
-Interrupt Controllers bindings used by client devices.
-
-The interrupt sources are as follows:
-
-0: CNTPSIRQ
-1: CNTPNSIRQ
-2: CNTHPIRQ
-3: CNTVIRQ
-8: GPU_FAST
-9: PMU_FAST
-
-Example:
-
-local_intc: local_intc {
-	compatible = "brcm,bcm2836-l1-intc";
-	reg = <0x40000000 0x100>;
-	interrupt-controller;
-	#interrupt-cells = <2>;
-	interrupt-parent = <&local_intc>;
-};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2836-l1-intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2836-l1-intc.yaml
new file mode 100644
index 000000000000..5fda626c80ce
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2836-l1-intc.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/brcm,bcm2836-l1-intc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: BCM2836 per-CPU interrupt controller
+
+maintainers:
+  - Stefan Wahren <wahrenst@gmx.net>
+  - Raspberry Pi Kernel Maintenance <kernel-list@raspberrypi.com>
+
+description:
+  The BCM2836 has a per-cpu interrupt controller for the timer, PMU
+  events, and SMP IPIs. One of the CPUs may receive interrupts for the
+  peripheral (GPU) events, which chain to the BCM2835-style interrupt
+  controller.
+
+allOf:
+  - $ref: /schemas/interrupt-controller.yaml#
+
+properties:
+  compatible:
+    const: brcm,bcm2836-l1-intc
+
+  reg:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 2
+
+required:
+  - compatible
+  - reg
+  - interrupt-controller
+  - '#interrupt-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    local_intc: interrupt-controller@40000000 {
+        compatible = "brcm,bcm2836-l1-intc";
+        reg = <0x40000000 0x100>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        interrupt-parent = <&local_intc>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml b/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml
index 709b2211276b..7e1451f9786a 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml
+++ b/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml
@@ -67,6 +67,7 @@ properties:
               - allwinner,sun20i-d1-plic
               - sophgo,cv1800b-plic
               - sophgo,cv1812h-plic
+              - sophgo,sg2002-plic
               - sophgo,sg2042-plic
               - thead,th1520-plic
           - const: thead,c900-plic
diff --git a/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt
deleted file mode 100644
index 0aa1a53012d6..000000000000
--- a/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt
+++ /dev/null
@@ -1,178 +0,0 @@
-* Atmel AT91 Pinmux Controller
-
-The AT91 Pinmux Controller, enables the IC
-to share one PAD to several functional blocks. The sharing is done by
-multiplexing the PAD input/output signals. For each PAD there are up to
-8 muxing options (called periph modes). Since different modules require
-different PAD settings (like pull up, keeper, etc) the controller controls
-also the PAD settings parameters.
-
-Please refer to pinctrl-bindings.txt in this directory for details of the
-common pinctrl bindings used by client devices, including the meaning of the
-phrase "pin configuration node".
-
-Atmel AT91 pin configuration node is a node of a group of pins which can be
-used for a specific device or function. This node represents both mux and config
-of the pins in that group. The 'pins' selects the function mode(also named pin
-mode) this pin can work on and the 'config' configures various pad settings
-such as pull-up, multi drive, etc.
-
-Required properties for iomux controller:
-- compatible: "atmel,at91rm9200-pinctrl" or "atmel,at91sam9x5-pinctrl"
-		or "atmel,sama5d3-pinctrl" or "microchip,sam9x60-pinctrl"
-		or "microchip,sam9x7-pinctrl", "microchip,sam9x60-pinctrl"
-- atmel,mux-mask: array of mask (periph per bank) to describe if a pin can be
-  configured in this periph mode. All the periph and bank need to be describe.
-
-How to create such array:
-
-Each column will represent the possible peripheral of the pinctrl
-Each line will represent a pio bank
-
-Take an example on the 9260
-Peripheral: 2 ( A and B)
-Bank: 3 (A, B and C)
-=>
-
-  /*    A         B     */
-  0xffffffff 0xffc00c3b  /* pioA */
-  0xffffffff 0x7fff3ccf  /* pioB */
-  0xffffffff 0x007fffff  /* pioC */
-
-For each peripheral/bank we will describe in a u32 if a pin can be
-configured in it by putting 1 to the pin bit (1 << pin)
-
-Let's take the pioA on peripheral B
-From the datasheet Table 10-2.
-Peripheral B
-PA0	MCDB0
-PA1	MCCDB
-PA2
-PA3	MCDB3
-PA4	MCDB2
-PA5	MCDB1
-PA6
-PA7
-PA8
-PA9
-PA10	ETX2
-PA11	ETX3
-PA12
-PA13
-PA14
-PA15
-PA16
-PA17
-PA18
-PA19
-PA20
-PA21
-PA22	ETXER
-PA23	ETX2
-PA24	ETX3
-PA25	ERX2
-PA26	ERX3
-PA27	ERXCK
-PA28	ECRS
-PA29	ECOL
-PA30	RXD4
-PA31	TXD4
-
-=> 0xffc00c3b
-
-Required properties for pin configuration node:
-- atmel,pins: 4 integers array, represents a group of pins mux and config
-  setting. The format is atmel,pins = <PIN_BANK PIN_BANK_NUM PERIPH CONFIG>.
-  The PERIPH 0 means gpio, PERIPH 1 is periph A, PERIPH 2 is periph B...
-  PIN_BANK 0 is pioA, PIN_BANK 1 is pioB...
-
-Bits used for CONFIG:
-PULL_UP		(1 << 0): indicate this pin needs a pull up.
-MULTIDRIVE	(1 << 1): indicate this pin needs to be configured as multi-drive.
-			Multi-drive is equivalent to open-drain type output.
-DEGLITCH	(1 << 2): indicate this pin needs deglitch.
-PULL_DOWN	(1 << 3): indicate this pin needs a pull down.
-DIS_SCHMIT	(1 << 4): indicate this pin needs to the disable schmitt trigger.
-DRIVE_STRENGTH (3 << 5): indicate the drive strength of the pin using the
-			following values:
-				00 - No change (reset state value kept)
-				01 - Low
-				10 - Medium
-				11 - High
-OUTPUT		(1 << 7): indicate this pin need to be configured as an output.
-OUTPUT_VAL	(1 << 8): output val (1 = high, 0 = low)
-SLEWRATE	(1 << 9): slew rate of the pin: 0 = disable, 1 = enable
-DEBOUNCE	(1 << 16): indicate this pin needs debounce.
-DEBOUNCE_VAL	(0x3fff << 17): debounce value.
-
-NOTE:
-Some requirements for using atmel,at91rm9200-pinctrl binding:
-1. We have pin function node defined under at91 controller node to represent
-   what pinmux functions this SoC supports.
-2. The driver can use the function node's name and pin configuration node's
-   name describe the pin function and group hierarchy.
-   For example, Linux at91 pinctrl driver takes the function node's name
-   as the function name and pin configuration node's name as group name to
-   create the map table.
-3. Each pin configuration node should have a phandle, devices can set pins
-   configurations by referring to the phandle of that pin configuration node.
-4. The gpio controller must be describe in the pinctrl simple-bus.
-
-For each bank the required properties are:
-- compatible: "atmel,at91sam9x5-gpio" or "atmel,at91rm9200-gpio" or
-  "microchip,sam9x60-gpio"
-  or "microchip,sam9x7-gpio", "microchip,sam9x60-gpio", "atmel,at91rm9200-gpio"
-- reg: physical base address and length of the controller's registers
-- interrupts: interrupt outputs from the controller
-- interrupt-controller: marks the device node as an interrupt controller
-- #interrupt-cells: should be 2; refer to ../interrupt-controller/interrupts.txt
-  for more details.
-- gpio-controller
-- #gpio-cells: should be 2; the first cell is the GPIO number and the second
-  cell specifies GPIO flags as defined in <dt-bindings/gpio/gpio.h>.
-- clocks: bank clock
-
-Examples:
-
-pinctrl@fffff400 {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	ranges;
-	compatible = "atmel,at91rm9200-pinctrl", "simple-bus";
-	reg = <0xfffff400 0x600>;
-
-	pioA: gpio@fffff400 {
-		compatible = "atmel,at91sam9x5-gpio";
-		reg = <0xfffff400 0x200>;
-		interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>;
-		#gpio-cells = <2>;
-		gpio-controller;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-		clocks = <&pmc PMC_TYPE_PERIPHERAL 2>;
-	};
-
-	atmel,mux-mask = <
-	      /*    A         B     */
-	       0xffffffff 0xffc00c3b  /* pioA */
-	       0xffffffff 0x7fff3ccf  /* pioB */
-	       0xffffffff 0x007fffff  /* pioC */
-	      >;
-
-	/* shared pinctrl settings */
-	dbgu {
-		pinctrl_dbgu: dbgu-0 {
-			atmel,pins =
-				<1 14 0x1 0x0	/* PB14 periph A */
-				 1 15 0x1 0x1>;	/* PB15 periph A with pullup */
-		};
-	};
-};
-
-dbgu: serial@fffff200 {
-	compatible = "atmel,at91sam9260-usart";
-	reg = <0xfffff200 0x200>;
-	interrupts = <1 4 7>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_dbgu>;
-};
diff --git a/Documentation/devicetree/bindings/pinctrl/atmel,at91rm9200-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/atmel,at91rm9200-pinctrl.yaml
new file mode 100644
index 000000000000..1bb386b42039
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/atmel,at91rm9200-pinctrl.yaml
@@ -0,0 +1,184 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/atmel,at91rm9200-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip PIO3 Pinmux Controller
+
+maintainers:
+  - Manikandan Muralidharan <manikandan.m@microchip.com>
+
+description:
+  The AT91 Pinmux Controller, enables the IC to share one PAD to several
+  functional blocks. The sharing is done by multiplexing the PAD input/output
+  signals. For each PAD there are up to 8 muxing options (called periph modes).
+  Since different modules require different PAD settings (like pull up, keeper,
+  etc) the controller controls also the PAD settings parameters.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - atmel,at91rm9200-pinctrl
+              - atmel,at91sam9x5-pinctrl
+              - atmel,sama5d3-pinctrl
+              - microchip,sam9x60-pinctrl
+          - const: simple-mfd
+      - items:
+          - enum:
+              - microchip,sam9x7-pinctrl
+          - const: microchip,sam9x60-pinctrl
+          - const: simple-mfd
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 1
+
+  ranges: true
+
+  atmel,mux-mask:
+    $ref: /schemas/types.yaml#/definitions/uint32-matrix
+    description: |
+      Array of mask (periph per bank) to describe if a pin can be
+      configured in this periph mode. All the periph and bank need to
+      be described.
+
+      #How to create such array:
+
+      Each column will represent the possible peripheral of the pinctrl
+      Each line will represent a pio bank
+
+      #Example:
+
+      In at91sam9260.dtsi,
+      Peripheral: 2 ( A and B)
+      Bank: 3 (A, B and C)
+
+      #    A          B
+      0xffffffff 0xffc00c3b  # pioA
+      0xffffffff 0x7fff3ccf  # pioB
+      0xffffffff 0x007fffff  # pioC
+
+      For each peripheral/bank we will describe in a u32 if a pin can be
+      configured in it by putting 1 to the pin bit (1 << pin)
+
+      Let's take the pioA on peripheral B whose value is 0xffc00c3b
+      From the datasheet Table 10-2.
+      Peripheral B
+      PA0     MCDB0
+      PA1     MCCDB
+      PA2
+      PA3     MCDB3
+      PA4     MCDB2
+      PA5     MCDB1
+      PA6
+      PA7
+      PA8
+      PA9
+      PA10    ETX2
+      PA11    ETX3
+      PA12
+      PA13
+      PA14
+      PA15
+      PA16
+      PA17
+      PA18
+      PA19
+      PA20
+      PA21
+      PA22    ETXER
+      PA23    ETX2
+      PA24    ETX3
+      PA25    ERX2
+      PA26    ERX3
+      PA27    ERXCK
+      PA28    ECRS
+      PA29    ECOL
+      PA30    RXD4
+      PA31    TXD4
+
+allOf:
+  - $ref: pinctrl.yaml#
+
+required:
+  - compatible
+  - ranges
+  - "#address-cells"
+  - "#size-cells"
+  - atmel,mux-mask
+
+patternProperties:
+  'gpio@[0-9a-f]+$':
+    $ref: /schemas/gpio/atmel,at91rm9200-gpio.yaml
+    unevaluatedProperties: false
+
+additionalProperties:
+  type: object
+  additionalProperties:
+    type: object
+    additionalProperties: false
+
+    properties:
+      atmel,pins:
+        $ref: /schemas/types.yaml#/definitions/uint32-matrix
+        description: |
+          Each entry consists of 4 integers and represents the pins
+          mux and config setting.The format is
+          atmel,pins = <PIN_BANK PIN_BANK_NUM PERIPH CONFIG>.
+          Supported pin number and mux varies for different SoCs, and
+          are defined in <include/dt-bindings/pinctrl/at91.h>.
+          items:
+            items:
+              - description:
+                  Pin bank
+              - description:
+                  Pin bank index
+              - description:
+                  Peripheral function
+              - description:
+                  Pad configuration
+
+examples:
+  - |
+     #include <dt-bindings/clock/at91.h>
+     #include <dt-bindings/interrupt-controller/irq.h>
+     #include <dt-bindings/pinctrl/at91.h>
+
+     pinctrl@fffff400 {
+       #address-cells = <1>;
+       #size-cells = <1>;
+       compatible = "atmel,at91rm9200-pinctrl", "simple-mfd";
+       ranges = <0xfffff400 0xfffff400 0x600>;
+
+       atmel,mux-mask = <
+         /*    A         B     */
+         0xffffffff 0xffc00c3b  /* pioA */
+         0xffffffff 0x7fff3ccf  /* pioB */
+         0xffffffff 0x007fffff  /* pioC */
+         >;
+
+       dbgu {
+         pinctrl_dbgu: dbgu-0 {
+           atmel,pins =
+             <AT91_PIOB 14 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+              AT91_PIOB 15 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+         };
+       };
+
+       pioA: gpio@fffff400 {
+         compatible = "atmel,at91rm9200-gpio";
+         reg = <0xfffff400 0x200>;
+         interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>;
+         #gpio-cells = <2>;
+         gpio-controller;
+         interrupt-controller;
+         #interrupt-cells = <2>;
+         clocks = <&pmc PMC_TYPE_PERIPHERAL 2>;
+       };
+     };
+...
diff --git a/Documentation/devicetree/bindings/power/renesas,rcar-sysc.yaml b/Documentation/devicetree/bindings/power/renesas,rcar-sysc.yaml
index e76fb273490f..347571e2545a 100644
--- a/Documentation/devicetree/bindings/power/renesas,rcar-sysc.yaml
+++ b/Documentation/devicetree/bindings/power/renesas,rcar-sysc.yaml
@@ -25,6 +25,7 @@ properties:
       - renesas,r8a7745-sysc  # RZ/G1E
       - renesas,r8a77470-sysc # RZ/G1C
       - renesas,r8a774a1-sysc # RZ/G2M
+      - renesas,r8a774a3-sysc # RZ/G2M v3.0
       - renesas,r8a774b1-sysc # RZ/G2N
       - renesas,r8a774c0-sysc # RZ/G2E
       - renesas,r8a774e1-sysc # RZ/G2H
diff --git a/Documentation/devicetree/bindings/reset/renesas,rst.yaml b/Documentation/devicetree/bindings/reset/renesas,rst.yaml
index 58b4a45d3380..7a81491379b0 100644
--- a/Documentation/devicetree/bindings/reset/renesas,rst.yaml
+++ b/Documentation/devicetree/bindings/reset/renesas,rst.yaml
@@ -29,6 +29,7 @@ properties:
       - renesas,r8a7745-rst       # RZ/G1E
       - renesas,r8a77470-rst      # RZ/G1C
       - renesas,r8a774a1-rst      # RZ/G2M
+      - renesas,r8a774a3-rst      # RZ/G2M v3.0
       - renesas,r8a774b1-rst      # RZ/G2N
       - renesas,r8a774c0-rst      # RZ/G2E
       - renesas,r8a774e1-rst      # RZ/G2H
diff --git a/Documentation/devicetree/bindings/riscv/sophgo.yaml b/Documentation/devicetree/bindings/riscv/sophgo.yaml
index 9bc813dad098..a14cb10ff3f0 100644
--- a/Documentation/devicetree/bindings/riscv/sophgo.yaml
+++ b/Documentation/devicetree/bindings/riscv/sophgo.yaml
@@ -28,6 +28,11 @@ properties:
           - const: sophgo,cv1812h
       - items:
           - enum:
+              - sipeed,licheerv-nano-b
+          - const: sipeed,licheerv-nano
+          - const: sophgo,sg2002
+      - items:
+          - enum:
               - milkv,pioneer
           - const: sophgo,sg2042
 
diff --git a/Documentation/devicetree/bindings/soc/bcm/brcm,bcm2711-avs-monitor.yaml b/Documentation/devicetree/bindings/soc/bcm/brcm,bcm2711-avs-monitor.yaml
new file mode 100644
index 000000000000..e02d9d7e7d9a
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/bcm/brcm,bcm2711-avs-monitor.yaml
@@ -0,0 +1,44 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/bcm/brcm,bcm2711-avs-monitor.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom AVS Monitor
+
+maintainers:
+  - Stefan Wahren <wahrenst@gmx.net>
+
+properties:
+  compatible:
+    items:
+      - const: brcm,bcm2711-avs-monitor
+      - const: syscon
+      - const: simple-mfd
+
+  reg:
+    maxItems: 1
+
+  thermal:
+    $ref: /schemas/thermal/brcm,avs-ro-thermal.yaml
+    description: Broadcom AVS ring oscillator thermal
+
+required:
+  - compatible
+  - reg
+  - thermal
+
+additionalProperties: false
+
+examples:
+  - |
+    avs-monitor@7d5d2000 {
+        compatible = "brcm,bcm2711-avs-monitor", "syscon", "simple-mfd";
+        reg = <0x7d5d2000 0xf00>;
+
+        thermal: thermal {
+            compatible = "brcm,bcm2711-thermal";
+            #thermal-sensor-cells = <0>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/soc/renesas/renesas.yaml b/Documentation/devicetree/bindings/soc/renesas/renesas.yaml
index 09d3ce97efa2..b7acb65bdecd 100644
--- a/Documentation/devicetree/bindings/soc/renesas/renesas.yaml
+++ b/Documentation/devicetree/bindings/soc/renesas/renesas.yaml
@@ -127,6 +127,18 @@ properties:
           - const: hoperun,hihope-rzg2m
           - const: renesas,r8a774a1
 
+      - description: RZ/G2M v3.0 (R8A774A3)
+        items:
+          - enum:
+              - hoperun,hihope-rzg2m # HopeRun HiHope RZ/G2M platform
+          - const: renesas,r8a774a3
+
+      - items:
+          - enum:
+              - hoperun,hihope-rzg2-ex # HopeRun expansion board for HiHope RZ/G2 platforms
+          - const: hoperun,hihope-rzg2m
+          - const: renesas,r8a774a3
+
       - description: RZ/G2N (R8A774B1)
         items:
           - enum:
@@ -516,6 +528,8 @@ properties:
       - description: RZ/V2H(P) (R9A09G057)
         items:
           - enum:
+              - renesas,rzv2h-evk # RZ/V2H EVK
+          - enum:
               - renesas,r9a09g057h41 # RZ/V2H
               - renesas,r9a09g057h42 # RZ/V2H with Mali-G31 support
               - renesas,r9a09g057h44 # RZ/V2HP with Mali-G31 + Mali-C55 support
diff --git a/Documentation/devicetree/bindings/soc/ti/ti,am654-serdes-ctrl.yaml b/Documentation/devicetree/bindings/soc/ti/ti,am654-serdes-ctrl.yaml
index a10a3b89ae05..94b36943a50f 100644
--- a/Documentation/devicetree/bindings/soc/ti/ti,am654-serdes-ctrl.yaml
+++ b/Documentation/devicetree/bindings/soc/ti/ti,am654-serdes-ctrl.yaml
@@ -14,6 +14,7 @@ properties:
     items:
       - const: ti,am654-serdes-ctrl
       - const: syscon
+      - const: simple-mfd
 
   reg:
     maxItems: 1
@@ -31,7 +32,7 @@ additionalProperties: false
 examples:
   - |
     clock@4080 {
-        compatible = "ti,am654-serdes-ctrl", "syscon";
+        compatible = "ti,am654-serdes-ctrl", "syscon", "simple-mfd";
         reg = <0x4080 0x4>;
 
         mux-controller {
diff --git a/Documentation/devicetree/bindings/timer/brcm,bcm2835-system-timer.txt b/Documentation/devicetree/bindings/timer/brcm,bcm2835-system-timer.txt
deleted file mode 100644
index 844bd5fbd04c..000000000000
--- a/Documentation/devicetree/bindings/timer/brcm,bcm2835-system-timer.txt
+++ /dev/null
@@ -1,22 +0,0 @@
-BCM2835 System Timer
-
-The System Timer peripheral provides four 32-bit timer channels and a
-single 64-bit free running counter. Each channel has an output compare
-register, which is compared against the 32 least significant bits of the
-free running counter values, and generates an interrupt.
-
-Required properties:
-
-- compatible : should be "brcm,bcm2835-system-timer"
-- reg : Specifies base physical address and size of the registers.
-- interrupts : A list of 4 interrupt sinks; one per timer channel.
-- clock-frequency : The frequency of the clock that drives the counter, in Hz.
-
-Example:
-
-timer {
-	compatible = "brcm,bcm2835-system-timer";
-	reg = <0x7e003000 0x1000>;
-	interrupts = <1 0>, <1 1>, <1 2>, <1 3>;
-	clock-frequency = <1000000>;
-};
diff --git a/Documentation/devicetree/bindings/timer/brcm,bcm2835-system-timer.yaml b/Documentation/devicetree/bindings/timer/brcm,bcm2835-system-timer.yaml
new file mode 100644
index 000000000000..f5804b5b0e63
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/brcm,bcm2835-system-timer.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/timer/brcm,bcm2835-system-timer.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: BCM2835 System Timer
+
+maintainers:
+  - Stefan Wahren <wahrenst@gmx.net>
+  - Raspberry Pi Kernel Maintenance <kernel-list@raspberrypi.com>
+
+description:
+  The System Timer peripheral provides four 32-bit timer channels and a
+  single 64-bit free running counter. Each channel has an output compare
+  register, which is compared against the 32 least significant bits of the
+  free running counter values, and generates an interrupt.
+
+properties:
+  compatible:
+    const: brcm,bcm2835-system-timer
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    items:
+      - description: System Timer Compare 0 match (used by VideoCore GPU)
+      - description: System Timer Compare 1 match (usable for ARM core)
+      - description: System Timer Compare 2 match (used by VideoCore GPU)
+      - description: System Timer Compare 3 match (usable for ARM core)
+
+  clock-frequency: true
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    timer@7e003000 {
+      compatible = "brcm,bcm2835-system-timer";
+      reg = <0x7e003000 0x1000>;
+      interrupts = <1 0>, <1 1>, <1 2>, <1 3>;
+      clock-frequency = <1000000>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml
index a70ce43b3dc0..e5d64fc4fe31 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.yaml
+++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml
@@ -804,6 +804,8 @@ patternProperties:
     description: Lantiq Semiconductor
   "^lattice,.*":
     description: Lattice Semiconductor
+  "^lckfb,.*":
+    description: Shenzhen JLC Technology Group Co., Ltd.
   "^lctech,.*":
     description: Shenzen LC Technology Co., Ltd.
   "^leadtek,.*":