diff options
| author | Daniel Golle <daniel@makrotopia.org> | 2025-11-03 12:19:58 +0000 |
|---|---|---|
| committer | Jakub Kicinski <kuba@kernel.org> | 2025-11-06 14:16:17 -0800 |
| commit | bea0c17786116141aaf3980dc73758e3cc0d2748 (patch) | |
| tree | 062f29fa9e395af430bced6462e3399dd170fd7e /Documentation/devicetree | |
| parent | 319fd7e9d446bb90469a82f876e78785f6da0bc5 (diff) | |
dt-bindings: net: dsa: lantiq,gswip: add support for MII delay properties
Add support for standard tx-internal-delay-ps and rx-internal-delay-ps
properties on port nodes to allow fine-tuning of RGMII clock delays.
The GSWIP switch hardware supports delay values in 500 picosecond
increments from 0 to 3500 picoseconds, with a post-reset default of 2000
picoseconds for both TX and RX delays. The driver currently sets the
delay to 0 in case the PHY is setup to carry out the delay by the
corresponding interface modes ("rgmii-id", "rgmii-rxid", "rgmii-txid").
This corresponds to the driver changes that allow adjusting MII delays
using Device Tree properties instead of relying solely on the PHY
interface mode.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/9e007d4f85c2c6d69e0b91f3663d99e0f6fc8eac.1762170107.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Diffstat (limited to 'Documentation/devicetree')
| -rw-r--r-- | Documentation/devicetree/bindings/net/dsa/lantiq,gswip.yaml | 18 |
1 files changed, 17 insertions, 1 deletions
diff --git a/Documentation/devicetree/bindings/net/dsa/lantiq,gswip.yaml b/Documentation/devicetree/bindings/net/dsa/lantiq,gswip.yaml index 809d0e9d0a15..929f6f8e4534 100644 --- a/Documentation/devicetree/bindings/net/dsa/lantiq,gswip.yaml +++ b/Documentation/devicetree/bindings/net/dsa/lantiq,gswip.yaml @@ -104,6 +104,20 @@ patternProperties: description: Configure the RMII reference clock to be a clock output rather than an input. Only applicable for RMII mode. + tx-internal-delay-ps: + enum: [0, 500, 1000, 1500, 2000, 2500, 3000, 3500] + description: + RGMII TX Clock Delay defined in pico seconds. + The delay lines adjust the MII clock vs. data timing. + If this property is not present the delay is determined by + the interface mode. + rx-internal-delay-ps: + enum: [0, 500, 1000, 1500, 2000, 2500, 3000, 3500] + description: + RGMII RX Clock Delay defined in pico seconds. + The delay lines adjust the MII clock vs. data timing. + If this property is not present the delay is determined by + the interface mode. required: - compatible @@ -127,8 +141,10 @@ examples: port@0 { reg = <0>; label = "lan3"; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; phy-handle = <&phy0>; + tx-internal-delay-ps = <2000>; + rx-internal-delay-ps = <2000>; }; port@1 { |