Merge tag 'thermal-7.2-rc1' of gitolite.kernel.org:pub/scm/linux/kernel/git/rafael/linux-pm

Pull thermal control updates from Rafael Wysocki:
 "These add new hardware support (i.MX93 TMU, Amlogic T7, Intel Arrow
  Lake, QCom Nord, Shikra and Hawi), fix issues in a number of places in
  the thermal control core and drivers, clean up code and refactor it in
  preparation for future changes:

   - Rework the initialization and cleanup of thermal class cooling
     devices to separate DT-based cooling device registration and
     cooling device registration without DT (Daniel Lezcano, Ovidiu
     Panait)

   - Update the cooling device DT bindings to support 3-cell cooling
     device representation, where the additional cell holds an ID to
     select a cooling mechanism for devices that offer multiple cooling
     mechanisms, and adjust the cooling device registration code
     accordingly (Gaurav Kohli, Daniel Lezcano)

   - Remove dead code from two functions in the thermal core and
     simplify the unregistration of thermal governors (Rafael Wysocki)

   - Fix critical temperature attribute removal handling in the generic
     thermal zone hwmon support code and rework that code to register a
     separate hwmon class device for each thermal zone (instead of using
     one hwmon class device for all thermal zones of the same type) to
     address thermal zone removal deadlocks (Rafael Wysocki)

   - Use attribute groups for adding temperature attributes to hwmon
     class devices associated with thermal zones (Rafael Wysocki)

   - Pass WQ_UNBOUND when allocating the thermal workqueue (Marco
     Crivellari)

   - Fix potential shift overflow in ptc_mmio_write() and improve error
     handling in proc_thermal_ptc_add() in the int340x thermal control
     driver (Aravind Anilraj)

   - Use sysfs_emit() for cpumask printing in the Intel powerclamp
     thermal driver (Yury Norov)

   - Add Arrow Lake CPU models to the intel_tcc_cooling driver (Srinivas
     Pandruvada)

   - Add QCom Nord, Shikra and Hawi temperature sensor DT bindings
     (Deepti Jaggi, Gaurav Kohli, Dipa Ramesh Mantre)

   - Use devm_add_action_or_reset() for clock disable on the NVidia
     soctherm and switch it to devm cooling device registration version
     (Daniel Lezcano)

   - Add the Amlogic T7 thermal sensor along with thermal calibration
     data read from SMC calls (Ronald Claveau)

   - Fix atomic temperature read in the QCom tsens driver to comply with
     hardware documentation (Priyansh Jain)

   - Add SpacemiT K1 thermal sensor support (Shuwei Wu)

   - Add i.MX93 temperature sensor support and filter out the invalid
     temperature (Jacky Bai)

   - Enable by default the TMU (Thermal Monitoring Unit) on Exynos
     platform (Krzysztof Kozlowski)

   - Rework interrupt initialization in the Tsens driver and add the
     optional wakeup source (Priyansh Jain)

   - Fix typo in a comment in the TSens QCom driver (Jinseok Kim)

   - Fix trailing whitespace and repeated word in the OF code, remove
     quoted string splitting across lines from the iMX7 driver, and
     remove a stray space from the thermal_trip_of_attr() macro
     definition (Mayur Kumar)

   - Update the thermal testing facility code to avoid NULL pointer
     dereferences by rejecting missing command arguments and replace
     sscanf() with kstrtoint() or kstrtoul() in that code (Ovidiu
     Panait, Samuel Moelius)"

* tag 'thermal-7.2-rc1' of gitolite.kernel.org:pub/scm/linux/kernel/git/rafael/linux-pm: (54 commits)
  thermal: sysfs: Replace sscanf() with kstrtoul()
  thermal: testing: Replace sscanf() with kstrtoint()
  thermal: testing: reject missing command arguments
  thermal: intel: intel_tcc_cooling: Add Arrow Lake CPU models
  thermal/drivers/qcom/tsens: Disable wakeup interrupt setup on automotive targets
  thermal/drivers/qcom/tsens: Switch wake IRQ handling to PM callbacks
  thermal/core: Fix missing stub for devm_thermal_cooling_device_register
  dt-bindings: thermal: cooling-devices: Update support for 3 cells cooling device
  thermal/of: Support cooling device ID in cooling-spec
  thermal/of: Pass cdev_id and introduce devm registration helper
  thermal/of: Add cooling device ID support
  thermal/of: Rename the devm_thermal_of_cooling_device_register() function
  thermal/core: Make cooling device OF node conditional on CONFIG_THERMAL_OF
  thermal/of: Move cooling device OF helpers out of thermal core
  hwmon: Use non-OF thermal cooling device registration API
  thermal/core: Add devm_thermal_cooling_device_register()
  thermal/core: Introduce non-OF thermal_cooling_device_register()
  thermal/drivers/samsung: Enable TMU by default
  thermal/driver/qoriq: Workaround unexpected temperature readings from tmu
  thermal/drivers/qoriq: Add i.MX93 tmu support
  ...

7 files changed, 125 insertions, 6 deletions

diff --git a/Documentation/devicetree/bindings/hwmon/pwm-fan.yaml b/Documentation/devicetree/bindings/hwmon/pwm-fan.yaml
index a84cc3a4cfdc..6a24851fd80d 100644
--- a/Documentation/devicetree/bindings/hwmon/pwm-fan.yaml
+++ b/Documentation/devicetree/bindings/hwmon/pwm-fan.yaml
@@ -63,7 +63,8 @@ properties:
     description: The PWM that is used to control the fan.
     maxItems: 1
 
-  "#cooling-cells": true
+  "#cooling-cells":
+    const: 2
 
 required:
   - compatible
diff --git a/Documentation/devicetree/bindings/thermal/amlogic,thermal.yaml b/Documentation/devicetree/bindings/thermal/amlogic,thermal.yaml
index 70b273271754..e28612510d67 100644
--- a/Documentation/devicetree/bindings/thermal/amlogic,thermal.yaml
+++ b/Documentation/devicetree/bindings/thermal/amlogic,thermal.yaml
@@ -21,7 +21,9 @@ properties:
               - amlogic,g12a-cpu-thermal
               - amlogic,g12a-ddr-thermal
           - const: amlogic,g12a-thermal
-      - const: amlogic,a1-cpu-thermal
+      - enum:
+          - amlogic,a1-cpu-thermal
+          - amlogic,t7-thermal
 
   reg:
     maxItems: 1
@@ -42,12 +44,34 @@ properties:
   '#thermal-sensor-cells':
     const: 0
 
+  amlogic,secure-monitor:
+    description: phandle to the secure monitor
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: phandle to the secure monitor
+          - description: sensor index to get specific calibration data
+
 required:
   - compatible
   - reg
   - interrupts
   - clocks
-  - amlogic,ao-secure
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - amlogic,a1-cpu-thermal
+              - amlogic,g12a-thermal
+    then:
+      required:
+        - amlogic,ao-secure
+    else:
+      required:
+        - amlogic,secure-monitor
 
 unevaluatedProperties: false
 
@@ -62,4 +86,13 @@ examples:
         #thermal-sensor-cells = <0>;
         amlogic,ao-secure = <&sec_AO>;
     };
+  - |
+    temperature-sensor@20000 {
+        compatible = "amlogic,t7-thermal";
+        reg = <0x0 0x20000 0x0 0x50>;
+        interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&clkc_periphs CLKID_TS>;
+        #thermal-sensor-cells = <0>;
+        amlogic,secure-monitor = <&sm 1>;
+    };
 ...
diff --git a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
index 7d34ba00e684..f0efaa8349ee 100644
--- a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
+++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
@@ -56,8 +56,10 @@ properties:
           - enum:
               - qcom,eliza-tsens
               - qcom,glymur-tsens
+              - qcom,hawi-tsens
               - qcom,kaanapali-tsens
               - qcom,milos-tsens
+              - qcom,nord-tsens
               - qcom,msm8953-tsens
               - qcom,msm8996-tsens
               - qcom,msm8998-tsens
@@ -74,6 +76,7 @@ properties:
               - qcom,sdm630-tsens
               - qcom,sdm670-tsens
               - qcom,sdm845-tsens
+              - qcom,shikra-tsens
               - qcom,sm6115-tsens
               - qcom,sm6350-tsens
               - qcom,sm6375-tsens
diff --git a/Documentation/devicetree/bindings/thermal/qoriq-thermal.yaml b/Documentation/devicetree/bindings/thermal/qoriq-thermal.yaml
index aa756dae512a..f3b136f5e1cb 100644
--- a/Documentation/devicetree/bindings/thermal/qoriq-thermal.yaml
+++ b/Documentation/devicetree/bindings/thermal/qoriq-thermal.yaml
@@ -25,6 +25,7 @@ properties:
     enum:
       - fsl,qoriq-tmu
       - fsl,imx8mq-tmu
+      - fsl,imx93-tmu
 
   reg:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/thermal/spacemit,k1-tsensor.yaml b/Documentation/devicetree/bindings/thermal/spacemit,k1-tsensor.yaml
new file mode 100644
index 000000000000..6dad76a7dd36
--- /dev/null
+++ b/Documentation/devicetree/bindings/thermal/spacemit,k1-tsensor.yaml
@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/thermal/spacemit,k1-tsensor.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: SpacemiT K1 Thermal Sensor
+
+description:
+  The SpacemiT K1 Thermal Sensor monitors the temperature of the SoC
+  using multiple internal sensors (e.g., soc, package, gpu, clusters).
+
+maintainers:
+  - Shuwei Wu <shuwei.wu@mailbox.org>
+
+$ref: thermal-sensor.yaml#
+
+properties:
+  compatible:
+    const: spacemit,k1-tsensor
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Core clock for thermal sensor
+      - description: Bus clock for thermal sensor
+
+  clock-names:
+    items:
+      - const: core
+      - const: bus
+
+  interrupts:
+    maxItems: 1
+
+  resets:
+    items:
+      - description: Reset for the thermal sensor
+
+  "#thermal-sensor-cells":
+    const: 1
+    description:
+      The first cell indicates the sensor ID.
+      0 = soc
+      1 = package
+      2 = gpu
+      3 = cluster0
+      4 = cluster1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - interrupts
+  - resets
+  - "#thermal-sensor-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/spacemit,k1-syscon.h>
+
+    thermal@d4018000 {
+        compatible = "spacemit,k1-tsensor";
+        reg = <0xd4018000 0x100>;
+        clocks = <&syscon_apbc CLK_TSEN>,
+                 <&syscon_apbc CLK_TSEN_BUS>;
+        clock-names = "core", "bus";
+        interrupts = <61>;
+        resets = <&syscon_apbc RESET_TSEN>;
+        #thermal-sensor-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/thermal/thermal-cooling-devices.yaml b/Documentation/devicetree/bindings/thermal/thermal-cooling-devices.yaml
index b9022f1613d8..28f5818f1e60 100644
--- a/Documentation/devicetree/bindings/thermal/thermal-cooling-devices.yaml
+++ b/Documentation/devicetree/bindings/thermal/thermal-cooling-devices.yaml
@@ -44,10 +44,14 @@ select: true
 properties:
   "#cooling-cells":
     description:
-      Must be 2, in order to specify minimum and maximum cooling state used in
+      Must be 2 or 3. If 2, specifies minimum and maximum cooling state used in
       the cooling-maps reference. The first cell is the minimum cooling state
       and the second cell is the maximum cooling state requested.
-    const: 2
+      If 3, the first cell specifies the thermal mitigation device specifier
+      index for devices that support multiple thermal mitigation mechanisms.
+      The two other cells are respectively the minimum cooling state and the
+      maximum cooling state.
+    enum: [2, 3]
 
 additionalProperties: true
 
diff --git a/Documentation/devicetree/bindings/thermal/thermal-zones.yaml b/Documentation/devicetree/bindings/thermal/thermal-zones.yaml
index 07d9f576ffe7..999ad40a20d5 100644
--- a/Documentation/devicetree/bindings/thermal/thermal-zones.yaml
+++ b/Documentation/devicetree/bindings/thermal/thermal-zones.yaml
@@ -211,7 +211,8 @@ patternProperties:
                   device. Using the THERMAL_NO_LIMIT (-1UL) constant in the
                   cooling-device phandle limit specifier lets the framework
                   use the minimum and maximum cooling state for that cooling
-                  device automatically.
+                  device automatically. If three arguments are specified,
+                  the first argument is the cooling device specifier.
 
               contribution:
                 $ref: /schemas/types.yaml#/definitions/uint32