Merge tag 'usb-7.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB / Thunderbolt updates from Greg KH:
 "Here is the big set of USB and Thunderbolt driver updates for 7.3-rc1.

  Lots of driver work for new devices and systems, and many other minor
  fixes and updates. Included in here are:

   - Thunderbolt subsystem driver updates and additions

   - typec driver updates and additions

   - usb gadget fixes all over the place, seems like people are finally
     paying attention to these drivers for some reason

   - xhci driver updates and fixes based on lots of reports

   - usb-serial driver updates and additions

   - new device ids

   - other minor USB driver updates and fixes

  All of these have been in linux-next for a while with no reported issues"

* tag 'usb-7.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (163 commits)
  usb: gadget: uvc: fix dangling pointers in uvc_function_bind() and uvc_function_unbind()
  usb: typec: hd3ss3220: fix VBUS regulator error message
  usb: usbfs: fix use-after-free of usb_device in usbdev_release()
  usb: gadget: u_audio: Fix use-after-free on sound card disconnect
  usb: dwc3: gadget: Fix use-after-free in dwc3_gadget_free_endpoints due to race condition
  usb: gadget: f_tcm: keep port count until LUN teardown completes
  usb: usbtest: disable dynamic ID support
  usb: typec: tcpci: pass correct rx_type to tcpm_pd_receive()
  USB: c67x00: fix use-after-free in c67x00_add_iso_urb()
  usb: typec: ucsi: use UCSI_TIMEOUT_MS for sync command completion
  usb: gadget: snps_udc_plat: clean up PHY on probe deferral
  usb: gadget: f_tcm: fix deadlock in usbg_make_tpg()
  usb: dwc2: gadget: Exit partial power down state when changing USB pull-up
  usb: gadget: f_fs: Fix Use-After-Free in AIO error path
  usb: gadget: f_fs: Prevent deadlock during ep0 read loop
  usb: gadget: at91_udc: drain polled-VBUS timer/work before udc is freed
  usb: gadget: midi2: remove default configfs groups on teardown
  usb: gadget: uvc: Fix null pointer dereference in uvcg_video_init()
  usb: typec: thunderbolt: Disable work before freeing tbt on remove
  usb: xhci: Handle bogus TRB pointers in Missed Service Error events
  ...

8 files changed, 127 insertions, 3 deletions

diff --git a/Documentation/devicetree/bindings/usb/aspeed,dwc3.yaml b/Documentation/devicetree/bindings/usb/aspeed,dwc3.yaml
new file mode 100644
index 000000000000..fff5a200f8c7
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/aspeed,dwc3.yaml
@@ -0,0 +1,93 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/aspeed,dwc3.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Aspeed SuperSpeed DWC3 USB SoC controller
+
+maintainers:
+  - Ryan Chen <ryan_chen@aspeedtech.com>
+
+description:
+  The common content of the node is defined in snps,dwc3.yaml.
+
+select:
+  properties:
+    compatible:
+      contains:
+        const: aspeed,ast2700-xhci
+  required:
+    - compatible
+
+properties:
+  compatible:
+    items:
+      - const: aspeed,ast2700-xhci
+      - const: snps,dwc3
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Controller bus early clock
+      - description: PHY reference clock
+      - description: Controller suspend clock
+
+  clock-names:
+    items:
+      - const: bus_early
+      - const: ref
+      - const: suspend
+
+  resets:
+    maxItems: 1
+
+  phys:
+    maxItems: 1
+
+  phy-names:
+    const: usb3-phy
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - resets
+  - phys
+  - phy-names
+
+allOf:
+  - $ref: snps,dwc3.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/aspeed,ast2700-scu.h>
+    #include <dt-bindings/reset/aspeed,ast2700-scu.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    bus {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        usb@12030000 {
+            compatible = "aspeed,ast2700-xhci", "snps,dwc3";
+            reg = <0x0 0x12030000 0x0 0x10000>;
+            interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&syscon0 SCU0_CLK_GATE_PORTAUSB2CLK>,
+                     <&syscon0 SCU0_CLK_U2PHY_REFCLK>,
+                     <&syscon0 SCU0_CLK_U2PHY_CLK12M>;
+            clock-names = "bus_early", "ref", "suspend";
+            resets = <&syscon0 SCU0_RESET_PORTA_XHCI>;
+            pinctrl-names = "default";
+            pinctrl-0 = <&pinctrl_usb3axh_default &pinctrl_usb2axh_default>;
+            phys = <&uphy3a>;
+            phy-names = "usb3-phy";
+            dr_mode = "host";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/usb/cdns,usb3.yaml b/Documentation/devicetree/bindings/usb/cdns,usb3.yaml
index e8082c5c05a2..c14a88aad31e 100644
--- a/Documentation/devicetree/bindings/usb/cdns,usb3.yaml
+++ b/Documentation/devicetree/bindings/usb/cdns,usb3.yaml
@@ -50,6 +50,9 @@ properties:
       - const: otg
       - const: wakeup
 
+  iommus:
+    maxItems: 1
+
   port:
     $ref: /schemas/graph.yaml#/properties/port
     description:
diff --git a/Documentation/devicetree/bindings/usb/generic-ehci.yaml b/Documentation/devicetree/bindings/usb/generic-ehci.yaml
index 55a5aa7d7a54..ae9fb70d0212 100644
--- a/Documentation/devicetree/bindings/usb/generic-ehci.yaml
+++ b/Documentation/devicetree/bindings/usb/generic-ehci.yaml
@@ -98,6 +98,10 @@ properties:
         - if a USB DRD channel: first clock should be host and second
           one should be peripheral
 
+  clock-names:
+    minItems: 1
+    maxItems: 4
+
   power-domains:
     maxItems: 1
 
@@ -186,6 +190,9 @@ allOf:
       required:
         - clocks
         - clock-names
+    else:
+      properties:
+        clock-names: false
 
 unevaluatedProperties: false
 
diff --git a/Documentation/devicetree/bindings/usb/generic-ohci.yaml b/Documentation/devicetree/bindings/usb/generic-ohci.yaml
index d42f448fa204..322808aaa283 100644
--- a/Documentation/devicetree/bindings/usb/generic-ohci.yaml
+++ b/Documentation/devicetree/bindings/usb/generic-ohci.yaml
@@ -83,6 +83,10 @@ properties:
         - if a USB DRD channel: first clock should be host and second
           one should be peripheral
 
+  clock-names:
+    minItems: 1
+    maxItems: 4
+
   power-domains:
     maxItems: 1
 
@@ -182,6 +186,7 @@ allOf:
 
     else:
       properties:
+        clock-names: false
         atmel,vbus-gpio: false
         atmel,oc-gpio: false
 
diff --git a/Documentation/devicetree/bindings/usb/mediatek,mtu3.yaml b/Documentation/devicetree/bindings/usb/mediatek,mtu3.yaml
index 21fc6bbe954f..d148e938d647 100644
--- a/Documentation/devicetree/bindings/usb/mediatek,mtu3.yaml
+++ b/Documentation/devicetree/bindings/usb/mediatek,mtu3.yaml
@@ -28,6 +28,7 @@ properties:
           - mediatek,mt8188-mtu3
           - mediatek,mt8192-mtu3
           - mediatek,mt8195-mtu3
+          - mediatek,mt8196-mtu3
           - mediatek,mt8365-mtu3
       - const: mediatek,mtu3
 
@@ -200,7 +201,10 @@ properties:
             103 - used by mt8195, IP0, specific 1.03;
             105 - used by mt8195, IP2, specific 1.05;
             106 - used by mt8195, IP3, specific 1.06;
-          enum: [1, 2, 101, 102, 103, 105, 106]
+            107 - used by mt8196, IP0, specific 1.07;
+            108 - used by mt8196, IP1, specific 1.08;
+            109 - used by mt8196, IP2, specific 1.09;
+            enum: [1, 2, 101, 102, 103, 105, 106, 107, 108, 109]
 
   mediatek,u3p-dis-msk:
     $ref: /schemas/types.yaml#/definitions/uint32
diff --git a/Documentation/devicetree/bindings/usb/qcom,snps-dwc3.yaml b/Documentation/devicetree/bindings/usb/qcom,snps-dwc3.yaml
index d99af9f413d0..ea60f7220afe 100644
--- a/Documentation/devicetree/bindings/usb/qcom,snps-dwc3.yaml
+++ b/Documentation/devicetree/bindings/usb/qcom,snps-dwc3.yaml
@@ -29,6 +29,7 @@ properties:
           - qcom,glymur-dwc3-mp
           - qcom,ipq4019-dwc3
           - qcom,ipq5018-dwc3
+          - qcom,ipq5210-dwc3
           - qcom,ipq5332-dwc3
           - qcom,ipq5424-dwc3
           - qcom,ipq6018-dwc3
@@ -36,6 +37,7 @@ properties:
           - qcom,ipq8074-dwc3
           - qcom,ipq9574-dwc3
           - qcom,kaanapali-dwc3
+          - qcom,maili-dwc3
           - qcom,milos-dwc3
           - qcom,msm8953-dwc3
           - qcom,msm8994-dwc3
@@ -60,6 +62,7 @@ properties:
           - qcom,sdx55-dwc3
           - qcom,sdx65-dwc3
           - qcom,sdx75-dwc3
+          - qcom,shikra-dwc3
           - qcom,sm4250-dwc3
           - qcom,sm6115-dwc3
           - qcom,sm6125-dwc3
@@ -203,9 +206,11 @@ allOf:
         compatible:
           contains:
             enum:
+              - qcom,ipq5210-dwc3
               - qcom,ipq5424-dwc3
               - qcom,ipq9574-dwc3
               - qcom,kaanapali-dwc3
+              - qcom,maili-dwc3
               - qcom,msm8953-dwc3
               - qcom,msm8996-dwc3
               - qcom,msm8998-dwc3
@@ -218,6 +223,7 @@ allOf:
               - qcom,sdx55-dwc3
               - qcom,sdx65-dwc3
               - qcom,sdx75-dwc3
+              - qcom,shikra-dwc3
               - qcom,sm6350-dwc3
               - qcom,sm8750-dwc3
     then:
@@ -497,6 +503,7 @@ allOf:
         compatible:
           contains:
             enum:
+              - qcom,ipq5210-dwc3
               - qcom,ipq5424-dwc3
               - qcom,ipq9574-dwc3
     then:
@@ -543,6 +550,7 @@ allOf:
               - qcom,ipq4019-dwc3
               - qcom,ipq8064-dwc3
               - qcom,kaanapali-dwc3
+              - qcom,maili-dwc3
               - qcom,qcs615-dwc3
               - qcom,qcs8300-dwc3
               - qcom,qdu1000-dwc3
@@ -556,6 +564,7 @@ allOf:
               - qcom,sdx55-dwc3
               - qcom,sdx65-dwc3
               - qcom,sdx75-dwc3
+              - qcom,shikra-dwc3
               - qcom,sm6350-dwc3
               - qcom,sm6375-dwc3
               - qcom,sm8150-dwc3
diff --git a/Documentation/devicetree/bindings/usb/renesas,usbhs.yaml b/Documentation/devicetree/bindings/usb/renesas,usbhs.yaml
index dc74e70f1b92..13715b7c94c8 100644
--- a/Documentation/devicetree/bindings/usb/renesas,usbhs.yaml
+++ b/Documentation/devicetree/bindings/usb/renesas,usbhs.yaml
@@ -27,6 +27,7 @@ properties:
               - renesas,usbhs-r9a07g044 # RZ/G2{L,LC}
               - renesas,usbhs-r9a07g054 # RZ/V2L
               - renesas,usbhs-r9a08g045 # RZ/G3S
+              - renesas,usbhs-r9a08g046 # RZ/G3L
               - renesas,usbhs-r9a09g047 # RZ/G3E
               - renesas,usbhs-r9a09g056 # RZ/V2N
               - renesas,usbhs-r9a09g057 # RZ/V2H(P)
diff --git a/Documentation/devicetree/bindings/usb/ti,tps6598x.yaml b/Documentation/devicetree/bindings/usb/ti,tps6598x.yaml
index 1745e28b3110..2c589e9e712e 100644
--- a/Documentation/devicetree/bindings/usb/ti,tps6598x.yaml
+++ b/Documentation/devicetree/bindings/usb/ti,tps6598x.yaml
@@ -4,13 +4,14 @@
 $id: http://devicetree.org/schemas/usb/ti,tps6598x.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Texas Instruments 6598x Type-C Port Switch and Power Delivery controller
+title: Texas Instruments Type-C port switch and USB Power Delivery controllers
 
 maintainers:
   - Bryan O'Donoghue <bryan.odonoghue@linaro.org>
 
 description: |
-  Texas Instruments 6598x Type-C Port Switch and Power Delivery controller
+  Texas Instruments 6598x and 66993 Type-C Port Switch and Power Delivery
+  controller.
 
   A variant of this controller known as Apple CD321x or Apple ACE is also
   present on hardware with Apple SoCs such as the M1.
@@ -19,6 +20,7 @@ properties:
   compatible:
     enum:
       - ti,tps6598x
+      - ti,tps66993
       - apple,cd321x
       - ti,tps25750