Merge tag 'drm-next-2024-05-15' of https://gitlab.freedesktop.org/drm/kernel

Pull drm updates from Dave Airlie:
 "This is the main pull request for the drm subsystems for 6.10.

  In drivers the main thing is a new driver for ARM Mali firmware based
  GPUs, otherwise there are a lot of changes to amdgpu/xe/i915/msm and
  scattered changes to everything else.

  In the core a bunch of headers and Kconfig was refactored, along with
  the addition of a new panic handler which is meant to provide a user
  friendly message when a panic happens and graphical display is
  enabled.

  New drivers:
   - panthor: ARM Mali/Immortalis CSF-based GPU driver

  Core:
   - add a CONFIG_DRM_WERROR option
   - make more headers self-contained
   - grab resv lock in pin/unpin
   - fix vmap resv locking
   - EDID/eDP panel matching
   - Kconfig cleanups
   - DT sound bindings
   - Add SIZE_HINTS property for cursor planes
   - Add struct drm_edid_product_id and helpers.
   - Use drm device based logging in more drm functions.
   - drop seq_file.h from a bunch of places
   - use drm_edid driver conversions

  dp:
   - DP Tunnel documentation
   - MST read sideband cap
   - Adaptive sync SDP prep work

  ttm:
   - improve placement for TTM BOs in idle/busy handling

  panic:
   - Fixes for drm-panic, and option to test it.
   - Add drm panic to simpledrm, mgag200, imx, ast

  bridge:
   - improve init ordering
   - adv7511: allow GPIO pin sharing
   - tc358775: add tc358675 support

  panel:
   - AUO B120XAN01.0
   - Samsung s6e3fa7
   - BOE NT116WHM-N44
   - CMN N116BCA-EA1,
   - CrystalClear CMT430B19N00
   - Startek KD050HDFIA020-C020A
   - powertip PH128800T006-ZHC01
   - Innolux G121X1-L03
   - LG sw43408
   - Khadas TS050 V2
   - EDO RM69380 OLED
   - CSOT MNB601LS1-1

  amdgpu:
   - HDCP/ODM/RAS fixes
   - Devcoredump improvements
   - Expose VCN activity via sysfs
   - SMY 13.0.x updates
   - Enable fast updates on DCN 3.1.4
   - Add dclk and vclk reporting on additional devices
   - Add ACA RAS infrastructure
   - Implement TLB flush fence
   - EEPROM handling fixes
   - SMUIO 14.0.2 support
   - SMU 14.0.1 Updates
   - SMU 14.0.2 support
   - Sync page table freeing with TLB flushes
   - DML2 refactor
   - DC debug improvements
   - DCN 3.5.x Updates
   - GPU reset fixes
   - HDP fix for second GFX pipe on GC 10.x
   - Enable secondary GFX pipe on GC 10.3
   - Refactor and clean up BACO/BOCO/BAMACO handling
   - Remove invalid TTM resource start check
   - UAF fix in VA IOCTL
   - GPUVM page fault redirection to secondary IH rings for IH 6.x
   - Initial support for mapping kernel queues via MES
   - Fix VRAM memory accounting

  amdkfd:
   - MQD handling cleanup
   - Preemption handling fixes for XCDs
   - TLB flush fix for GC 9.4.2
   - Properly clean up workqueue during module unload
   - Fix memory leak process create failure
   - Range check CP bad op exception targets to avoid reporting invalid exceptions to userspace
   - Fix eviction fence handling
   - Fix leak in GPU memory allocation failure case
   - DMABuf import handling fix
   - Enable SQ watchpoint for gfx10

  i915:
   - Adding new DG2 PCI ID
   - add context hints for GT frequency
   - enable only one CCS for compute workloads
   - new workarounds
   - Fix UAF on destroy against retire race and remove two earlier partial fixes
   - Limit the reserved VM space to only the platforms that need it
   - Fix gt reset with GuC submission is disable
   - Add and use gt_to_guc() wrapper

  i915/xe display:
   - Lunar Lake display enabling, including cdclk and other refactors
   - BIOS/VBT/opregion related refactor
   - Digital port related refactor/clean-up
   - Fix 2s boot time regression on DP panel replay init
   - Remove duplication on audio enable/disable on SDVO and g4x+ DP
   - Disable AuxCCS framebuffers if built for Xe
   - Make crtc disable more atomic
   - Increase DP idle pattern wait timeout to 2ms
   - Start using container_of_const() for some extra const safety
   - Fix Jasper Lake boot freeze
   - Enable MST mode for 128b/132b single-stream sideband
   - Enable Adaptive Sync SDP Support for DP
   - Fix MTL supported DP rates - removal of UHBR13.5
   - PLL refactoring
   - Limit eDP MSO pipe only for display version 20
   - More display refactor towards independence from i915 dev_priv
   - Convert i915/xe fbdev to DRM client
   - More initial work to make display code more independent from i915

  xe:
   - improved error capture
   - clean up some uAPI leftovers
   - devcoredump update
   - Add BMG mocs table
   - Handle GSCCS ER interrupt
   - Implement xe2- and GuC workarounds
   - struct xe_device cleanup
   - Hwmon updates
   - Add LRC parsing for more GPU instruction
   - Increase VM_BIND number of per-ioctl Ops
   - drm/xe: Add XE_BO_GGTT_INVALIDATE flag
   - Initial development for SR-IOV support
   - Add new PCI IDs to DG2 platform
   - Move userptr over to start using hmm_range_fault

  msm:
   - Switched to generating register header files during build process
     instead of shipping pre-generated headers
   - Merged DPU and MDP4 format databases.
   - DP:
     - Stop using compat string to distinguish DP and eDP cases
     - Added support for X Elite platform (X1E80100)
     - Reworked DP aux/audio support
     - Added SM6350 DP to the bindings
   - GPU:
     - a7xx perfcntr reg fixes
     - MAINTAINERS updates
     - a750 devcoredump support

  radeon:
   - Silence UBSAN warnings related to flexible arrays

  nouveau:
   - move some uAPI objects to uapi headers

  omapdrm:
   - console fix

  ast:
   - add i2c polling

  qaic:
   - add debugfs entries

  exynos:
   - fix platform_driver .owner
   - drop cleanup code

  mediatek:
   - Use devm_platform_get_and_ioremap_resource() in mtk_hdmi_ddc_probe()
   - Add GAMMA 12-bit LUT support for MT8188
   - Rename mtk_drm_* to mtk_*
   - Drop driver owner initialization
   - Correct calculation formula of PHY Timing"

* tag 'drm-next-2024-05-15' of https://gitlab.freedesktop.org/drm/kernel: (1477 commits)
  drm/xe/ads: Use flexible-array
  drm/xe: Use ordered WQ for G2H handler
  drm/msm/gen_header: allow skipping the validation
  drm/msm/a6xx: Cleanup indexed regs const'ness
  drm/msm: Add devcoredump support for a750
  drm/msm: Adjust a7xx GBIF debugbus dumping
  drm/msm: Update a6xx registers XML
  drm/msm: Fix imported a750 snapshot header for upstream
  drm/msm: Import a750 snapshot registers from kgsl
  MAINTAINERS: Add Konrad Dybcio as a reviewer for the Adreno driver
  MAINTAINERS: Add a separate entry for Qualcomm Adreno GPU drivers
  drm/msm/a6xx: Avoid a nullptr dereference when speedbin setting fails
  drm/msm/adreno: fix CP cycles stat retrieval on a7xx
  drm/msm/a7xx: allow writing to CP_BV counter selection registers
  drm: zynqmp_dpsub: Always register bridge
  Revert "drm/bridge: ti-sn65dsi83: Fix enable error path"
  drm/fb_dma: Add checks in drm_fb_dma_get_scanout_buffer()
  drm/fbdev-generic: Do not set physical framebuffer address
  drm/panthor: Fix the FW reset logic
  drm/panthor: Make sure we handle 'unknown group state' case properly
  ...

1 files changed, 80 insertions, 0 deletions

diff --git a/Documentation/gpu/amdgpu/debugging.rst b/Documentation/gpu/amdgpu/debugging.rst
new file mode 100644
index 000000000000..e75f97d0e4ea
--- /dev/null
+++ b/Documentation/gpu/amdgpu/debugging.rst
@@ -0,0 +1,80 @@
+===============
+ GPU Debugging
+===============
+
+GPUVM Debugging
+===============
+
+To aid in debugging GPU virtual memory related problems, the driver supports a
+number of options module parameters:
+
+`vm_fault_stop` - If non-0, halt the GPU memory controller on a GPU page fault.
+
+`vm_update_mode` - If non-0, use the CPU to update GPU page tables rather than
+the GPU.
+
+
+Decoding a GPUVM Page Fault
+===========================
+
+If you see a GPU page fault in the kernel log, you can decode it to figure
+out what is going wrong in your application.  A page fault in your kernel
+log may look something like this:
+
+::
+
+ [gfxhub0] no-retry page fault (src_id:0 ring:24 vmid:3 pasid:32777, for process glxinfo pid 2424 thread glxinfo:cs0 pid 2425)
+   in page starting at address 0x0000800102800000 from IH client 0x1b (UTCL2)
+ VM_L2_PROTECTION_FAULT_STATUS:0x00301030
+ 	Faulty UTCL2 client ID: TCP (0x8)
+ 	MORE_FAULTS: 0x0
+ 	WALKER_ERROR: 0x0
+ 	PERMISSION_FAULTS: 0x3
+ 	MAPPING_ERROR: 0x0
+ 	RW: 0x0
+
+First you have the memory hub, gfxhub and mmhub.  gfxhub is the memory
+hub used for graphics, compute, and sdma on some chips.  mmhub is the
+memory hub used for multi-media and sdma on some chips.
+
+Next you have the vmid and pasid.  If the vmid is 0, this fault was likely
+caused by the kernel driver or firmware.  If the vmid is non-0, it is generally
+a fault in a user application.  The pasid is used to link a vmid to a system
+process id.  If the process is active when the fault happens, the process
+information will be printed.
+
+The GPU virtual address that caused the fault comes next.
+
+The client ID indicates the GPU block that caused the fault.
+Some common client IDs:
+
+- CB/DB: The color/depth backend of the graphics pipe
+- CPF: Command Processor Frontend
+- CPC: Command Processor Compute
+- CPG: Command Processor Graphics
+- TCP/SQC/SQG: Shaders
+- SDMA: SDMA engines
+- VCN: Video encode/decode engines
+- JPEG: JPEG engines
+
+PERMISSION_FAULTS describe what faults were encountered:
+
+- bit 0: the PTE was not valid
+- bit 1: the PTE read bit was not set
+- bit 2: the PTE write bit was not set
+- bit 3: the PTE execute bit was not set
+
+Finally, RW, indicates whether the access was a read (0) or a write (1).
+
+In the example above, a shader (cliend id = TCP) generated a read (RW = 0x0) to
+an invalid page (PERMISSION_FAULTS = 0x3) at GPU virtual address
+0x0000800102800000.  The user can then inspect their shader code and resource
+descriptor state to determine what caused the GPU page fault.
+
+UMR
+===
+
+`umr <https://gitlab.freedesktop.org/tomstdenis/umr>`_ is a general purpose
+GPU debugging and diagnostics tool.  Please see the umr
+`documentation <https://umr.readthedocs.io/en/main/>`_ for more information
+about its capabilities.