Merge tag 'leds-next-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds

Pull LED updates from Lee Jones:

 - Allow struct bin_attribute instances to be placed in read-only memory
   for enhanced protection

 - Fix a memory leak in the cht-wcove driver by using
   devm_led_classdev_register()

 - Fix an OF node reference leak in the netxbig driver

 - Ensure PWM is disabled properly in pwm-multicolor suspend

 - Add support for Texas Instruments LP8864, LP8864S, LP8866
   LED-backlight drivers

 - Add support for STMicroelectronics's LED1202 12-channel LED driver

 - Convert LP8860 bindings to YAML format

 - Add bindings for the TI LP8864/LP8866 LED drivers

 - Add LED1202 LED controller bindings

 - Fix path to color definitions in leds-class-multicolor.yaml

 - Add pm660l compatible to qcom,spmi-flash-led bindings

 - Extend cznic,turris-omnia-leds binding with interrupts property

 - Add documentation for the STMicroelectronics LED1202 driver

 - Add entry for AAEON UP board FPGA drivers in MAINTAINERS

 - Fix a wrong format specifier in the ledtrig-activity driver

 - Fix a bug in the lp8860 driver where only half of the EEPROM was
   written

* tag 'leds-next-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds: (28 commits)
  leds: triggers: Constify 'struct bin_attribute'
  leds: cht-wcove: Use devm_led_classdev_register() to avoid memory leak
  leds: lp8864: Add support for Texas Instruments LP8864, LP8864S, LP8866 LED-backlights
  dt-bindings: leds: Convert LP8860 into YAML format
  leds: Add LED1202 I2C driver
  dt-bindings: leds: Add LED1202 LED Controller
  Documentation:leds: Add leds-st1202.rst
  leds: pwm-multicolor: Disable PWM when going to suspend
  leds: netxbig: Fix an OF node reference leak in netxbig_leds_get_of_pdata()
  turris-omnia-mcu-interface.h: Move macro definitions outside of enums
  MAINTAINERS: Add entry for AAEON UP board FPGA drivers
  leds: Add AAEON UP board LED driver
  leds: trigger: netdev: Check offload ability on interface up
  leds: turris-omnia: Use uppercase first letter in all comments
  leds: turris-omnia: Use dev_err_probe() where appropriate
  leds: turris-omnia: Inform about missing LED gamma correction feature in the MCU driver
  platform: cznic: turris-omnia-mcu: Inform about missing LED panel brightness change interrupt feature
  leds: turris-omnia: Notify sysfs on MCU global LEDs brightness change
  leds: turris-omnia: Document driver private structures
  dt-bindings: leds: cznic,turris-omnia-leds: Allow interrupts property
  ...

5 files changed, 100 insertions, 51 deletions

diff --git a/Documentation/devicetree/bindings/leds/cznic,turris-omnia-leds.yaml b/Documentation/devicetree/bindings/leds/cznic,turris-omnia-leds.yaml
index 34ef5215c150..f52f6304c79e 100644
--- a/Documentation/devicetree/bindings/leds/cznic,turris-omnia-leds.yaml
+++ b/Documentation/devicetree/bindings/leds/cznic,turris-omnia-leds.yaml
@@ -23,6 +23,12 @@ properties:
     description: I2C slave address of the microcontroller.
     maxItems: 1
 
+  interrupts:
+    description:
+      Specifier for the global LED brightness changed by front button press
+      interrupt.
+    maxItems: 1
+
   "#address-cells":
     const: 1
 
@@ -56,6 +62,7 @@ additionalProperties: false
 examples:
   - |
 
+    #include <dt-bindings/interrupt-controller/irq.h>
     #include <dt-bindings/leds/common.h>
 
     i2c {
@@ -65,6 +72,7 @@ examples:
         led-controller@2b {
             compatible = "cznic,turris-omnia-leds";
             reg = <0x2b>;
+            interrupts-extended = <&mcu 11 IRQ_TYPE_NONE>;
             #address-cells = <1>;
             #size-cells = <0>;
 
diff --git a/Documentation/devicetree/bindings/leds/leds-class-multicolor.yaml b/Documentation/devicetree/bindings/leds/leds-class-multicolor.yaml
index e850a8894758..bb40bb9e036e 100644
--- a/Documentation/devicetree/bindings/leds/leds-class-multicolor.yaml
+++ b/Documentation/devicetree/bindings/leds/leds-class-multicolor.yaml
@@ -27,7 +27,7 @@ properties:
     description: |
       For multicolor LED support this property should be defined as either
       LED_COLOR_ID_RGB or LED_COLOR_ID_MULTI which can be found in
-      include/linux/leds/common.h.
+      include/dt-bindings/leds/common.h.
     enum: [ 8, 9 ]
 
 required:
diff --git a/Documentation/devicetree/bindings/leds/leds-lp8860.txt b/Documentation/devicetree/bindings/leds/leds-lp8860.txt
deleted file mode 100644
index 8bb25749a3da..000000000000
--- a/Documentation/devicetree/bindings/leds/leds-lp8860.txt
+++ /dev/null
@@ -1,50 +0,0 @@
-* Texas Instruments - lp8860 4-Channel LED Driver
-
-The LP8860-Q1 is an high-efficiency LED
-driver with boost controller. It has 4 high-precision
-current sinks that can be controlled by a PWM input
-signal, a SPI/I2C master, or both.
-
-Required properties:
-	- compatible :
-		"ti,lp8860"
-	- reg : I2C slave address
-	- #address-cells : 1
-	- #size-cells : 0
-
-Optional properties:
-	- enable-gpios : gpio pin to enable (active high)/disable the device.
-	- vled-supply : LED supply
-
-Required child properties:
-	- reg : 0
-
-Optional child properties:
-	- function : see Documentation/devicetree/bindings/leds/common.txt
-	- color : see Documentation/devicetree/bindings/leds/common.txt
-	- label : see Documentation/devicetree/bindings/leds/common.txt (deprecated)
-	- linux,default-trigger :
-	   see Documentation/devicetree/bindings/leds/common.txt
-
-Example:
-
-#include <dt-bindings/leds/common.h>
-
-led-controller@2d {
-	compatible = "ti,lp8860";
-	#address-cells = <1>;
-	#size-cells = <0>;
-	reg = <0x2d>;
-	enable-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
-	vled-supply = <&vbatt>;
-
-	led@0 {
-		reg = <0>;
-		function = LED_FUNCTION_BACKLIGHT;
-		color = <LED_COLOR_ID_WHITE>;
-		linux,default-trigger = "backlight";
-	};
-}
-
-For more product information please see the link below:
-https://www.ti.com/product/lp8860-q1
diff --git a/Documentation/devicetree/bindings/leds/qcom,spmi-flash-led.yaml b/Documentation/devicetree/bindings/leds/qcom,spmi-flash-led.yaml
index 1ba607685f5f..bcf0ad4ea57e 100644
--- a/Documentation/devicetree/bindings/leds/qcom,spmi-flash-led.yaml
+++ b/Documentation/devicetree/bindings/leds/qcom,spmi-flash-led.yaml
@@ -23,6 +23,7 @@ properties:
     items:
       - enum:
           - qcom,pm6150l-flash-led
+          - qcom,pm660l-flash-led
           - qcom,pm8150c-flash-led
           - qcom,pm8150l-flash-led
           - qcom,pm8350c-flash-led
diff --git a/Documentation/devicetree/bindings/leds/ti,lp8860.yaml b/Documentation/devicetree/bindings/leds/ti,lp8860.yaml
new file mode 100644
index 000000000000..0ee357b02661
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/ti,lp8860.yaml
@@ -0,0 +1,90 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/ti,lp8860.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments - lp8860 4-Channel LED Driver
+
+maintainers:
+  - Andrew Davis <afd@ti.com>
+
+description: |
+  The LP8860-Q1 is an high-efficiency LED driver with boost controller.
+  It has 4 high-precision current sinks that can be controlled by a PWM input
+  signal, a SPI/I2C master, or both.
+
+  For more product information please see the link below:
+    https://www.ti.com/product/lp8860-q1
+
+properties:
+  compatible:
+    const: ti,lp8860
+
+  reg:
+    maxItems: 1
+    description: I2C slave address
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  enable-gpios:
+    maxItems: 1
+    description: GPIO pin to enable (active high) / disable the device
+
+  vled-supply:
+    description: LED supply
+
+patternProperties:
+  "^led(@[0-3])?$":
+    type: object
+    $ref: common.yaml#
+    unevaluatedProperties: false
+
+    properties:
+      reg:
+        description:
+          Index of the LED.
+        maxItems: 1
+
+      function: true
+      color: true
+      label: true
+      linux,default-trigger: true
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/leds/common.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        led-controller@2d {
+            compatible = "ti,lp8860";
+            #address-cells = <1>;
+            #size-cells = <0>;
+            reg = <0x2d>;
+            enable-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
+            vled-supply = <&vbatt>;
+
+            led@0 {
+                reg = <0>;
+                function = LED_FUNCTION_BACKLIGHT;
+                color = <LED_COLOR_ID_WHITE>;
+                linux,default-trigger = "backlight";
+            };
+        };
+    };
+
+...