Merge tag 'usb-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB/Thunderbolt updates from Greg KH:
 "Here is the big set of USB and Thunderbolt driver updates for
  6.19-rc1. Nothing major here, just lots of tiny updates for most of
  the common USB drivers. Included in here are:

   - more xhci driver updates and fixes

   - Thunderbolt driver cleanups

   - usb serial driver updates

   - typec driver updates

   - USB tracepoint additions

   - dwc3 driver updates, including support for Apple hardware

   - lots of other smaller driver updates and cleanups

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'usb-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (161 commits)
  usb: gadget: tegra-xudc: Always reinitialize data toggle when clear halt
  USB: serial: option: move Telit 0x10c7 composition in the right place
  USB: serial: option: add Telit Cinterion FE910C04 new compositions
  usb: typec: ucsi: fix use-after-free caused by uec->work
  usb: typec: ucsi: fix probe failure in gaokun_ucsi_probe()
  usb: dwc3: core: Remove redundant comment in core init
  usb: phy: Initialize struct usb_phy list_head
  USB: serial: option: add Foxconn T99W760
  usb: usb-storage: No additional quirks need to be added to the EL-R12 optical drive.
  usb: typec: hd3ss3220: Enable VBUS based on ID pin state
  dt-bindings: usb: ti,hd3ss3220: Add support for VBUS based on ID state
  usb: typec: anx7411: add WQ_PERCPU to alloc_workqueue users
  USB: add WQ_PERCPU to alloc_workqueue users
  dt-bindings: usb: dwc3-xilinx: Describe the reset constraint for the versal platform
  drivers/usb/storage: use min() instead of min_t()
  usb: raw-gadget: cap raw_io transfer length to KMALLOC_MAX_SIZE
  usb: ohci-da8xx: remove unused platform data
  usb: gadget: functionfs: use dma_buf_unmap_attachment_unlocked() helper
  usb: uas: reduce time under spinlock
  usb: dwc3: eic7700: Add EIC7700 USB driver
  ...

15 files changed, 364 insertions, 35 deletions

diff --git a/Documentation/ABI/testing/sysfs-class-usb_power_delivery b/Documentation/ABI/testing/sysfs-class-usb_power_delivery
index 61d233c320ea..c754458a527e 100644
--- a/Documentation/ABI/testing/sysfs-class-usb_power_delivery
+++ b/Documentation/ABI/testing/sysfs-class-usb_power_delivery
@@ -254,3 +254,31 @@ Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
 Description:
 		The PPS Power Limited bit indicates whether or not the source
 		supply will exceed the rated output power if requested.
+
+Standard Power Range (SPR) Adjustable Voltage Supplies
+
+What:		/sys/class/usb_power_delivery/.../<capability>/<position>:spr_adjustable_voltage_supply
+Date:		Oct 2025
+Contact:	Badhri Jagan Sridharan <badhri@google.com>
+Description:
+		Adjustable Voltage Supply (AVS) Augmented PDO (APDO).
+
+What:		/sys/class/usb_power_delivery/.../<capability>/<position>:spr_adjustable_voltage_supply/maximum_current_9V_to_15V
+Date:		Oct 2025
+Contact:	Badhri Jagan Sridharan <badhri@google.com>
+Description:
+		Maximum Current for 9V to 15V range in milliamperes.
+
+What:		/sys/class/usb_power_delivery/.../<capability>/<position>:spr_adjustable_voltage_supply/maximum_current_15V_to_20V
+Date:		Oct 2025
+Contact:	Badhri Jagan Sridharan <badhri@google.com>
+Description:
+		Maximum Current for greater than 15V till 20V range in
+		milliamperes.
+
+What:		/sys/class/usb_power_delivery/.../<capability>/<position>:spr_adjustable_voltage_supply/peak_current
+Date:		Oct 2025
+Contact:	Badhri Jagan Sridharan <badhri@google.com>
+Description:
+		This file shows the value of the Adjustable Voltage Supply Peak Current
+		Capability field.
diff --git a/Documentation/admin-guide/thunderbolt.rst b/Documentation/admin-guide/thunderbolt.rst
index 102c693c8f81..07303c1346fb 100644
--- a/Documentation/admin-guide/thunderbolt.rst
+++ b/Documentation/admin-guide/thunderbolt.rst
@@ -203,10 +203,10 @@ host controller or a device, it is important that the firmware can be
 upgraded to the latest where possible bugs in it have been fixed.
 Typically OEMs provide this firmware from their support site.
 
-There is also a central site which has links where to download firmware
-for some machines:
-
-  `Thunderbolt Updates <https://thunderbolttechnology.net/updates>`_
+Currently, recommended method of updating firmware is through "fwupd" tool.
+It uses LVFS (Linux Vendor Firmware Service) portal by default to get the
+latest firmware from hardware vendors and updates connected devices if found
+compatible. For details refer to: https://github.com/fwupd/fwupd.
 
 Before you upgrade firmware on a device, host or retimer, please make
 sure it is a suitable upgrade. Failing to do that may render the device
@@ -215,18 +215,40 @@ tools!
 
 Host NVM upgrade on Apple Macs is not supported.
 
-Once the NVM image has been downloaded, you need to plug in a
-Thunderbolt device so that the host controller appears. It does not
-matter which device is connected (unless you are upgrading NVM on a
-device - then you need to connect that particular device).
+Fwupd is installed by default. If you don't have it on your system, simply
+use your distro package manager to get it.
+
+To see possible updates through fwupd, you need to plug in a Thunderbolt
+device so that the host controller appears. It does not matter which
+device is connected (unless you are upgrading NVM on a device - then you
+need to connect that particular device).
 
 Note an OEM-specific method to power the controller up ("force power") may
 be available for your system in which case there is no need to plug in a
 Thunderbolt device.
 
-After that we can write the firmware to the non-active parts of the NVM
-of the host or device. As an example here is how Intel NUC6i7KYK (Skull
-Canyon) Thunderbolt controller NVM is upgraded::
+Updating firmware using fwupd is straightforward - refer to official
+readme on fwupd github.
+
+If firmware image is written successfully, the device shortly disappears.
+Once it comes back, the driver notices it and initiates a full power
+cycle. After a while device appears again and this time it should be
+fully functional.
+
+Device of interest should display new version under "Current version"
+and "Update State: Success" in fwupd's interface.
+
+Upgrading firmware manually
+---------------------------------------------------------------
+If possible, use fwupd to updated the firmware. However, if your device OEM
+has not uploaded the firmware to LVFS, but it is available for download
+from their side, you can use method below to directly upgrade the
+firmware.
+
+Manual firmware update can be done with 'dd' tool. To update firmware
+using this method, you need to write it to the non-active parts of NVM
+of the host or device. Example on how to update Intel NUC6i7KYK
+(Skull Canyon) Thunderbolt controller NVM::
 
   # dd if=KYK_TBT_FW_0018.bin of=/sys/bus/thunderbolt/devices/0-0/nvm_non_active0/nvmem
 
@@ -235,10 +257,8 @@ upgrade process as follows::
 
   # echo 1 > /sys/bus/thunderbolt/devices/0-0/nvm_authenticate
 
-If no errors are returned, the host controller shortly disappears. Once
-it comes back the driver notices it and initiates a full power cycle.
-After a while the host controller appears again and this time it should
-be fully functional.
+If no errors are returned, device should behave as described in previous
+section.
 
 We can verify that the new NVM firmware is active by running the following
 commands::
diff --git a/Documentation/devicetree/bindings/usb/apple,dwc3.yaml b/Documentation/devicetree/bindings/usb/apple,dwc3.yaml
new file mode 100644
index 000000000000..f70c33f32c5d
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/apple,dwc3.yaml
@@ -0,0 +1,80 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/apple,dwc3.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Apple Silicon DWC3 USB controller
+
+maintainers:
+  - Sven Peter <sven@kernel.org>
+
+description:
+  Apple Silicon SoCs use a Synopsys DesignWare DWC3 based controller for each of
+  their Type-C ports.
+
+allOf:
+  - $ref: snps,dwc3-common.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - apple,t6000-dwc3
+              - apple,t6020-dwc3
+              - apple,t8112-dwc3
+          - const: apple,t8103-dwc3
+      - const: apple,t8103-dwc3
+
+  reg:
+    items:
+      - description: Core DWC3 region
+      - description: Apple-specific DWC3 region
+
+  reg-names:
+    items:
+      - const: dwc3-core
+      - const: dwc3-apple
+
+  interrupts:
+    maxItems: 1
+
+  iommus:
+    maxItems: 2
+
+  resets:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - interrupts
+  - iommus
+  - resets
+  - power-domains
+  - usb-role-switch
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/apple-aic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    usb@82280000 {
+      compatible = "apple,t8103-dwc3";
+      reg = <0x82280000 0xcd00>, <0x8228cd00 0x3200>;
+      reg-names = "dwc3-core", "dwc3-apple";
+      interrupts = <AIC_IRQ 777 IRQ_TYPE_LEVEL_HIGH>;
+      iommus = <&dwc3_0_dart_0 0>, <&dwc3_0_dart_1 1>;
+
+      power-domains = <&ps_atc0_usb>;
+      resets = <&atcphy0>;
+
+      usb-role-switch;
+    };
diff --git a/Documentation/devicetree/bindings/usb/dwc3-xilinx.yaml b/Documentation/devicetree/bindings/usb/dwc3-xilinx.yaml
index 36f5c644d959..d6823ef5f9a7 100644
--- a/Documentation/devicetree/bindings/usb/dwc3-xilinx.yaml
+++ b/Documentation/devicetree/bindings/usb/dwc3-xilinx.yaml
@@ -47,6 +47,7 @@ properties:
       - const: ref_clk
 
   resets:
+    minItems: 1
     description:
       A list of phandles for resets listed in reset-names.
 
@@ -56,6 +57,7 @@ properties:
       - description: USB APB reset
 
   reset-names:
+    minItems: 1
     items:
       - const: usb_crst
       - const: usb_hibrst
@@ -95,6 +97,26 @@ required:
   - resets
   - reset-names
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - xlnx,versal-dwc3
+    then:
+      properties:
+        resets:
+          maxItems: 1
+        reset-names:
+          maxItems: 1
+    else:
+      properties:
+        resets:
+          minItems: 3
+        reset-names:
+          minItems: 3
+
 additionalProperties: false
 
 examples:
diff --git a/Documentation/devicetree/bindings/usb/eswin,eic7700-usb.yaml b/Documentation/devicetree/bindings/usb/eswin,eic7700-usb.yaml
new file mode 100644
index 000000000000..41c3b1b98991
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/eswin,eic7700-usb.yaml
@@ -0,0 +1,94 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/eswin,eic7700-usb.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ESWIN EIC7700 SoC Usb Controller
+
+maintainers:
+  - Wei Yang <yangwei1@eswincomputing.com>
+  - Senchuan Zhang <zhangsenchuan@eswincomputing.com>
+  - Hang Cao <caohang@eswincomputing.com>
+
+description:
+  The Usb controller on EIC7700 SoC.
+
+allOf:
+  - $ref: snps,dwc3-common.yaml#
+
+properties:
+  compatible:
+    const: eswin,eic7700-dwc3
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-names:
+    items:
+      - const: peripheral
+
+  clocks:
+    maxItems: 3
+
+  clock-names:
+    items:
+      - const: aclk
+      - const: cfg
+      - const: usb_en
+
+  resets:
+    maxItems: 2
+
+  reset-names:
+    items:
+      - const: vaux
+      - const: usb_rst
+
+  eswin,hsp-sp-csr:
+    description:
+      HSP CSR is to control and get status of different high-speed peripherals
+      (such as Ethernet, USB, SATA, etc.) via register, which can tune
+      board-level's parameters of PHY, etc.
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: phandle to HSP Register Controller hsp_sp_csr node.
+          - description: USB bus register offset.
+          - description: AXI low power register offset.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - interrupts
+  - interrupt-names
+  - resets
+  - reset-names
+  - eswin,hsp-sp-csr
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    usb@50480000 {
+        compatible = "eswin,eic7700-dwc3";
+        reg = <0x50480000 0x10000>;
+        clocks = <&clock 135>,
+                 <&clock 136>,
+                 <&hspcrg 18>;
+        clock-names = "aclk", "cfg", "usb_en";
+        interrupt-parent = <&plic>;
+        interrupts = <85>;
+        interrupt-names = "peripheral";
+        resets = <&reset 84>, <&hspcrg 2>;
+        reset-names = "vaux", "usb_rst";
+        dr_mode = "peripheral";
+        maximum-speed = "high-speed";
+        phy_type = "utmi";
+        eswin,hsp-sp-csr = <&hsp_sp_csr 0x800 0x818>;
+    };
diff --git a/Documentation/devicetree/bindings/usb/fsl,ls1028a.yaml b/Documentation/devicetree/bindings/usb/fsl,ls1028a.yaml
index a44bdf391887..4784f057264a 100644
--- a/Documentation/devicetree/bindings/usb/fsl,ls1028a.yaml
+++ b/Documentation/devicetree/bindings/usb/fsl,ls1028a.yaml
@@ -9,21 +9,19 @@ title: Freescale layerscape SuperSpeed DWC3 USB SoC controller
 maintainers:
   - Frank Li <Frank.Li@nxp.com>
 
-select:
-  properties:
-    compatible:
-      contains:
-        enum:
-          - fsl,ls1028a-dwc3
-  required:
-    - compatible
-
 properties:
   compatible:
-    items:
-      - enum:
-          - fsl,ls1028a-dwc3
-      - const: snps,dwc3
+    oneOf:
+      - items:
+          - enum:
+              - fsl,ls1012a-dwc3
+              - fsl,ls1043a-dwc3
+              - fsl,ls1046a-dwc3
+              - fsl,ls1088a-dwc3
+              - fsl,ls208xa-dwc3
+              - fsl,lx2160a-dwc3
+          - const: fsl,ls1028a-dwc3
+      - const: fsl,ls1028a-dwc3
 
   reg:
     maxItems: 1
@@ -31,6 +29,11 @@ properties:
   interrupts:
     maxItems: 1
 
+  iommus:
+    maxItems: 1
+
+  dma-coherent: true
+
 unevaluatedProperties: false
 
 required:
@@ -39,14 +42,14 @@ required:
   - interrupts
 
 allOf:
-  - $ref: snps,dwc3.yaml#
+  - $ref: snps,dwc3-common.yaml#
 
 examples:
   - |
     #include <dt-bindings/interrupt-controller/arm-gic.h>
 
     usb@fe800000 {
-        compatible = "fsl,ls1028a-dwc3", "snps,dwc3";
+        compatible = "fsl,ls1028a-dwc3";
         reg = <0xfe800000 0x100000>;
         interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
     };
diff --git a/Documentation/devicetree/bindings/usb/fsl,usbmisc.yaml b/Documentation/devicetree/bindings/usb/fsl,usbmisc.yaml
index ca677d1a8274..d06efe4dbb3b 100644
--- a/Documentation/devicetree/bindings/usb/fsl,usbmisc.yaml
+++ b/Documentation/devicetree/bindings/usb/fsl,usbmisc.yaml
@@ -36,6 +36,7 @@ properties:
               - fsl,imx8mm-usbmisc
               - fsl,imx8mn-usbmisc
               - fsl,imx8ulp-usbmisc
+              - fsl,imx94-usbmisc
               - fsl,imx95-usbmisc
           - const: fsl,imx7d-usbmisc
           - const: fsl,imx6q-usbmisc
diff --git a/Documentation/devicetree/bindings/usb/generic-ehci.yaml b/Documentation/devicetree/bindings/usb/generic-ehci.yaml
index 508d958e698c..4e84bead0232 100644
--- a/Documentation/devicetree/bindings/usb/generic-ehci.yaml
+++ b/Documentation/devicetree/bindings/usb/generic-ehci.yaml
@@ -46,6 +46,7 @@ properties:
               - aspeed,ast2400-ehci
               - aspeed,ast2500-ehci
               - aspeed,ast2600-ehci
+              - aspeed,ast2700-ehci
               - brcm,bcm3384-ehci
               - brcm,bcm63268-ehci
               - brcm,bcm6328-ehci
diff --git a/Documentation/devicetree/bindings/usb/generic-xhci.yaml b/Documentation/devicetree/bindings/usb/generic-xhci.yaml
index a2b94a138999..62678abd74b5 100644
--- a/Documentation/devicetree/bindings/usb/generic-xhci.yaml
+++ b/Documentation/devicetree/bindings/usb/generic-xhci.yaml
@@ -14,12 +14,15 @@ properties:
     oneOf:
       - description: Generic xHCI device
         const: generic-xhci
-      - description: Armada 37xx/375/38x/8k SoCs
+      - description: Armada 375/38x SoCs
         items:
           - enum:
-              - marvell,armada3700-xhci
               - marvell,armada-375-xhci
               - marvell,armada-380-xhci
+      - description: Armada 37xx/8k SoCs
+        items:
+          - enum:
+              - marvell,armada3700-xhci
               - marvell,armada-8k-xhci
           - const: generic-xhci
       - description: Broadcom SoCs with power domains
@@ -53,6 +56,14 @@ properties:
 
   dma-coherent: true
 
+  dr_mode:
+    enum:
+      - host
+      - otg
+
+  iommus:
+    maxItems: 1
+
   power-domains:
     maxItems: 1
 
diff --git a/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.yaml b/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.yaml
index 004d3ebec091..231e6f35a986 100644
--- a/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.yaml
+++ b/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.yaml
@@ -34,6 +34,7 @@ properties:
           - mediatek,mt8183-xhci
           - mediatek,mt8186-xhci
           - mediatek,mt8188-xhci
+          - mediatek,mt8189-xhci
           - mediatek,mt8192-xhci
           - mediatek,mt8195-xhci
           - mediatek,mt8365-xhci
@@ -168,7 +169,8 @@ properties:
             104 - used by mt8195, IP1, specific 1.04;
             105 - used by mt8195, IP2, specific 1.05;
             106 - used by mt8195, IP3, specific 1.06;
-          enum: [1, 2, 101, 102, 103, 104, 105, 106]
+            110 - used by mt8189, IP4, specific 1.10;
+          enum: [1, 2, 101, 102, 103, 104, 105, 106, 110]
 
   mediatek,u3p-dis-msk:
     $ref: /schemas/types.yaml#/definitions/uint32
diff --git a/Documentation/devicetree/bindings/usb/qcom,snps-dwc3.yaml b/Documentation/devicetree/bindings/usb/qcom,snps-dwc3.yaml
index d49a58d5478f..8cee7c5582f2 100644
--- a/Documentation/devicetree/bindings/usb/qcom,snps-dwc3.yaml
+++ b/Documentation/devicetree/bindings/usb/qcom,snps-dwc3.yaml
@@ -24,6 +24,8 @@ properties:
   compatible:
     items:
       - enum:
+          - qcom,glymur-dwc3
+          - qcom,glymur-dwc3-mp
           - qcom,ipq4019-dwc3
           - qcom,ipq5018-dwc3
           - qcom,ipq5332-dwc3
@@ -32,6 +34,7 @@ properties:
           - qcom,ipq8064-dwc3
           - qcom,ipq8074-dwc3
           - qcom,ipq9574-dwc3
+          - qcom,kaanapali-dwc3
           - qcom,milos-dwc3
           - qcom,msm8953-dwc3
           - qcom,msm8994-dwc3
@@ -67,6 +70,7 @@ properties:
           - qcom,sm8450-dwc3
           - qcom,sm8550-dwc3
           - qcom,sm8650-dwc3
+          - qcom,sm8750-dwc3
           - qcom,x1e80100-dwc3
           - qcom,x1e80100-dwc3-mp
       - const: qcom,snps-dwc3
@@ -200,6 +204,7 @@ allOf:
           contains:
             enum:
               - qcom,ipq9574-dwc3
+              - qcom,kaanapali-dwc3
               - qcom,msm8953-dwc3
               - qcom,msm8996-dwc3
               - qcom,msm8998-dwc3
@@ -213,6 +218,7 @@ allOf:
               - qcom,sdx65-dwc3
               - qcom,sdx75-dwc3
               - qcom,sm6350-dwc3
+              - qcom,sm8750-dwc3
     then:
       properties:
         clocks:
@@ -392,6 +398,28 @@ allOf:
         compatible:
           contains:
             enum:
+              - qcom,glymur-dwc3
+              - qcom,glymur-dwc3-mp
+
+    then:
+      properties:
+        clocks:
+          maxItems: 7
+        clock-names:
+          items:
+            - const: cfg_noc
+            - const: core
+            - const: iface
+            - const: sleep
+            - const: mock_utmi
+            - const: noc_aggr_north
+            - const: noc_aggr_south
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
               - qcom,ipq5018-dwc3
               - qcom,ipq6018-dwc3
               - qcom,ipq8074-dwc3
@@ -456,6 +484,7 @@ allOf:
         compatible:
           contains:
             enum:
+              - qcom,glymur-dwc3
               - qcom,milos-dwc3
               - qcom,x1e80100-dwc3
     then:
@@ -479,6 +508,7 @@ allOf:
             enum:
               - qcom,ipq4019-dwc3
               - qcom,ipq8064-dwc3
+              - qcom,kaanapali-dwc3
               - qcom,msm8994-dwc3
               - qcom,qcs615-dwc3
               - qcom,qcs8300-dwc3
@@ -501,6 +531,7 @@ allOf:
               - qcom,sm8450-dwc3
               - qcom,sm8550-dwc3
               - qcom,sm8650-dwc3
+              - qcom,sm8750-dwc3
     then:
       properties:
         interrupts:
@@ -521,6 +552,7 @@ allOf:
         compatible:
           contains:
             enum:
+              - qcom,glymur-dwc3-mp
               - qcom,sc8180x-dwc3-mp
               - qcom,x1e80100-dwc3-mp
     then:
diff --git a/Documentation/devicetree/bindings/usb/renesas,rzg3e-xhci.yaml b/Documentation/devicetree/bindings/usb/renesas,rzg3e-xhci.yaml
index 98260f9fb442..3f4b09e48ce0 100644
--- a/Documentation/devicetree/bindings/usb/renesas,rzg3e-xhci.yaml
+++ b/Documentation/devicetree/bindings/usb/renesas,rzg3e-xhci.yaml
@@ -4,14 +4,22 @@
 $id: http://devicetree.org/schemas/usb/renesas,rzg3e-xhci.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Renesas RZ/G3E USB 3.2 Gen2 Host controller
+title: Renesas USB 3.2 Gen2 Host controller
 
 maintainers:
   - Biju Das <biju.das.jz@bp.renesas.com>
 
 properties:
   compatible:
-    const: renesas,r9a09g047-xhci
+    oneOf:
+      - items:
+          - enum:
+              - renesas,r9a09g056-xhci # RZ/V2N
+              - renesas,r9a09g057-xhci # RZ/V2H(P)
+          - const: renesas,r9a09g047-xhci
+
+      - items:
+          - const: renesas,r9a09g047-xhci # RZ/G3E
 
   reg:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/usb/samsung,exynos-dwc3.yaml b/Documentation/devicetree/bindings/usb/samsung,exynos-dwc3.yaml
index 6d39e5066944..8af0143c3e47 100644
--- a/Documentation/devicetree/bindings/usb/samsung,exynos-dwc3.yaml
+++ b/Documentation/devicetree/bindings/usb/samsung,exynos-dwc3.yaml
@@ -22,6 +22,9 @@ properties:
           - samsung,exynos850-dwusb3
           - samsung,exynosautov920-dwusb3
       - items:
+          - const: samsung,exynos8890-dwusb3
+          - const: samsung,exynos7-dwusb3
+      - items:
           - const: samsung,exynos990-dwusb3
           - const: samsung,exynos850-dwusb3
 
@@ -36,6 +39,9 @@ properties:
     minItems: 1
     maxItems: 4
 
+  power-domains:
+    maxItems: 1
+
   ranges: true
 
   '#size-cells':
diff --git a/Documentation/devicetree/bindings/usb/ti,hd3ss3220.yaml b/Documentation/devicetree/bindings/usb/ti,hd3ss3220.yaml
index bec1c8047bc0..06099e93c6c3 100644
--- a/Documentation/devicetree/bindings/usb/ti,hd3ss3220.yaml
+++ b/Documentation/devicetree/bindings/usb/ti,hd3ss3220.yaml
@@ -25,6 +25,14 @@ properties:
   interrupts:
     maxItems: 1
 
+  id-gpios:
+    description:
+      An input gpio for USB ID pin. Upon detecting a UFP device, HD3SS3220
+      will keep ID pin high if VBUS is not at VSafe0V. Once VBUS is at VSafe0V,
+      the HD3SS3220 will assert ID pin low. This is done to enforce Type-C
+      requirement that VBUS must be at VSafe0V before re-enabling VBUS.
+    maxItems: 1
+
   ports:
     $ref: /schemas/graph.yaml#/properties/ports
     description: OF graph bindings (specified in bindings/graph.txt) that model
diff --git a/Documentation/devicetree/bindings/usb/usb-uhci.yaml b/Documentation/devicetree/bindings/usb/usb-uhci.yaml
index d8336f72dc1f..e050ca203945 100644
--- a/Documentation/devicetree/bindings/usb/usb-uhci.yaml
+++ b/Documentation/devicetree/bindings/usb/usb-uhci.yaml
@@ -20,6 +20,7 @@ properties:
               - aspeed,ast2400-uhci
               - aspeed,ast2500-uhci
               - aspeed,ast2600-uhci
+              - aspeed,ast2700-uhci
           - const: generic-uhci
 
   reg:
@@ -28,6 +29,9 @@ properties:
   interrupts:
     maxItems: 1
 
+  resets:
+    maxItems: 1
+
   '#ports':
     $ref: /schemas/types.yaml#/definitions/uint32
 
@@ -50,6 +54,15 @@ allOf:
       required:
         - clocks
 
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: aspeed,ast2700-uhci
+    then:
+      required:
+        - resets
+
 unevaluatedProperties: false
 
 examples: