OMAP1 clock: convert mach-omap1/clock.h to mach-omap1/clock_data.c

The OMAP1 clock code currently #includes a large .h file full of static
data structures.  Instead, define the data in a .c file.

Russell King <linux@arm.linux.org.uk> proposed this new arrangement:

    http://marc.info/?l=linux-omap&m=125967425908895&w=2

This patch also deals with most of the flagrant checkpatch violations.

While here, separate the mpu_rate data structures out into their own
files, opp.h and opp_data.c.  In the long run, these mpu_rate tables
should be replaced with OPP code.

Also includes a patch from Felipe Balbi <felipe.balbi@nokia.com> to
mark omap1_clk_functions as __initdata to avoid a section warning:

    http://patchwork.kernel.org/patch/64366/

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Felipe Balbi <felipe.balbi@nokia.com>
Cc: Nishanth Menon <nm@ti.com>

1 files changed, 37 insertions, 630 deletions

diff --git a/arch/arm/mach-omap1/clock.h b/arch/arm/mach-omap1/clock.h
index 70195cad7610..a4190afb8614 100644
--- a/arch/arm/mach-omap1/clock.h
+++ b/arch/arm/mach-omap1/clock.h
@@ -1,7 +1,7 @@
 /*
  *  linux/arch/arm/mach-omap1/clock.h
  *
- *  Copyright (C) 2004 - 2005 Nokia corporation
+ *  Copyright (C) 2004 - 2005, 2009 Nokia corporation
  *  Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>
  *  Based on clocks.h by Tony Lindgren, Gordon McNutt and RidgeRun, Inc
  *
@@ -13,30 +13,36 @@
 #ifndef __ARCH_ARM_MACH_OMAP1_CLOCK_H
 #define __ARCH_ARM_MACH_OMAP1_CLOCK_H
 
-static unsigned long omap1_ckctl_recalc(struct clk *clk);
-static unsigned long omap1_watchdog_recalc(struct clk *clk);
-static int omap1_set_sossi_rate(struct clk *clk, unsigned long rate);
-static unsigned long omap1_sossi_recalc(struct clk *clk);
-static unsigned long omap1_ckctl_recalc_dsp_domain(struct clk *clk);
-static int omap1_clk_set_rate_dsp_domain(struct clk * clk, unsigned long rate);
-static int omap1_set_uart_rate(struct clk * clk, unsigned long rate);
-static unsigned long omap1_uart_recalc(struct clk *clk);
-static int omap1_set_ext_clk_rate(struct clk * clk, unsigned long rate);
-static long omap1_round_ext_clk_rate(struct clk * clk, unsigned long rate);
-static void omap1_init_ext_clk(struct clk * clk);
-static int omap1_select_table_rate(struct clk * clk, unsigned long rate);
-static long omap1_round_to_table_rate(struct clk * clk, unsigned long rate);
-
-static int omap1_clk_set_rate_ckctl_arm(struct clk *clk, unsigned long rate);
-static long omap1_clk_round_rate_ckctl_arm(struct clk *clk, unsigned long rate);
-
-struct mpu_rate {
-	unsigned long		rate;
-	unsigned long		xtal;
-	unsigned long		pll_rate;
-	__u16			ckctl_val;
-	__u16			dpllctl_val;
-};
+#include <linux/clk.h>
+
+#include <plat/clock.h>
+
+extern int __init omap1_clk_init(void);
+extern int omap1_clk_enable(struct clk *clk);
+extern void omap1_clk_disable(struct clk *clk);
+extern long omap1_clk_round_rate(struct clk *clk, unsigned long rate);
+extern int omap1_clk_set_rate(struct clk *clk, unsigned long rate);
+extern unsigned long omap1_ckctl_recalc(struct clk *clk);
+extern int omap1_set_sossi_rate(struct clk *clk, unsigned long rate);
+extern unsigned long omap1_sossi_recalc(struct clk *clk);
+extern unsigned long omap1_ckctl_recalc_dsp_domain(struct clk *clk);
+extern int omap1_clk_set_rate_dsp_domain(struct clk *clk, unsigned long rate);
+extern int omap1_set_uart_rate(struct clk *clk, unsigned long rate);
+extern unsigned long omap1_uart_recalc(struct clk *clk);
+extern int omap1_set_ext_clk_rate(struct clk *clk, unsigned long rate);
+extern long omap1_round_ext_clk_rate(struct clk *clk, unsigned long rate);
+extern void omap1_init_ext_clk(struct clk *clk);
+extern int omap1_select_table_rate(struct clk *clk, unsigned long rate);
+extern long omap1_round_to_table_rate(struct clk *clk, unsigned long rate);
+extern int omap1_clk_set_rate_ckctl_arm(struct clk *clk, unsigned long rate);
+extern long omap1_clk_round_rate_ckctl_arm(struct clk *clk, unsigned long rate);
+extern unsigned long omap1_watchdog_recalc(struct clk *clk);
+
+#ifdef CONFIG_OMAP_RESET_CLOCKS
+extern void __init omap1_clk_disable_unused(struct clk *clk);
+#else
+#define omap1_clk_disable_unused	NULL
+#endif
 
 struct uart_clk {
 	struct clk	clk;
@@ -96,611 +102,12 @@ struct arm_idlect1_clk {
 #define SOFT_REQ_REG		0xfffe0834
 #define SOFT_REQ_REG2		0xfffe0880
 
-/*-------------------------------------------------------------------------
- * Omap1 MPU rate table
- *-------------------------------------------------------------------------*/
-static struct mpu_rate rate_table[] = {
-	/* MPU MHz, xtal MHz, dpll1 MHz, CKCTL, DPLL_CTL
-	 * NOTE: Comment order here is different from bits in CKCTL value:
-	 * armdiv, dspdiv, dspmmu, tcdiv, perdiv, lcddiv
-	 */
-#if defined(CONFIG_OMAP_ARM_216MHZ)
-	{ 216000000, 12000000, 216000000, 0x050d, 0x2910 }, /* 1/1/2/2/2/8 */
-#endif
-#if defined(CONFIG_OMAP_ARM_195MHZ)
-	{ 195000000, 13000000, 195000000, 0x050e, 0x2790 }, /* 1/1/2/2/4/8 */
-#endif
-#if defined(CONFIG_OMAP_ARM_192MHZ)
-	{ 192000000, 19200000, 192000000, 0x050f, 0x2510 }, /* 1/1/2/2/8/8 */
-	{ 192000000, 12000000, 192000000, 0x050f, 0x2810 }, /* 1/1/2/2/8/8 */
-	{  96000000, 12000000, 192000000, 0x055f, 0x2810 }, /* 2/2/2/2/8/8 */
-	{  48000000, 12000000, 192000000, 0x0baf, 0x2810 }, /* 4/4/4/8/8/8 */
-	{  24000000, 12000000, 192000000, 0x0fff, 0x2810 }, /* 8/8/8/8/8/8 */
-#endif
-#if defined(CONFIG_OMAP_ARM_182MHZ)
-	{ 182000000, 13000000, 182000000, 0x050e, 0x2710 }, /* 1/1/2/2/4/8 */
-#endif
-#if defined(CONFIG_OMAP_ARM_168MHZ)
-	{ 168000000, 12000000, 168000000, 0x010f, 0x2710 }, /* 1/1/1/2/8/8 */
-#endif
-#if defined(CONFIG_OMAP_ARM_150MHZ)
-	{ 150000000, 12000000, 150000000, 0x010a, 0x2cb0 }, /* 1/1/1/2/4/4 */
-#endif
-#if defined(CONFIG_OMAP_ARM_120MHZ)
-	{ 120000000, 12000000, 120000000, 0x010a, 0x2510 }, /* 1/1/1/2/4/4 */
-#endif
-#if defined(CONFIG_OMAP_ARM_96MHZ)
-	{  96000000, 12000000,  96000000, 0x0005, 0x2410 }, /* 1/1/1/1/2/2 */
-#endif
-#if defined(CONFIG_OMAP_ARM_60MHZ)
-	{  60000000, 12000000,  60000000, 0x0005, 0x2290 }, /* 1/1/1/1/2/2 */
-#endif
-#if defined(CONFIG_OMAP_ARM_30MHZ)
-	{  30000000, 12000000,  60000000, 0x0555, 0x2290 }, /* 2/2/2/2/2/2 */
-#endif
-	{ 0, 0, 0, 0, 0 },
-};
-
-/*-------------------------------------------------------------------------
- * Omap1 clocks
- *-------------------------------------------------------------------------*/
+extern __u32 arm_idlect1_mask;
+extern struct clk *api_ck_p, *ck_dpll1_p, *ck_ref_p;
 
-static struct clk ck_ref = {
-	.name		= "ck_ref",
-	.ops		= &clkops_null,
-	.rate		= 12000000,
-};
-
-static struct clk ck_dpll1 = {
-	.name		= "ck_dpll1",
-	.ops		= &clkops_null,
-	.parent		= &ck_ref,
-};
-
-/*
- * FIXME: This clock seems to be necessary but no-one has asked for its
- * activation.  [ FIX: SoSSI, SSR ]
- */
-static struct arm_idlect1_clk ck_dpll1out = {
-	.clk = {
-		.name		= "ck_dpll1out",
-		.ops		= &clkops_generic,
-		.parent		= &ck_dpll1,
-		.flags		= CLOCK_IDLE_CONTROL | ENABLE_REG_32BIT |
-				  ENABLE_ON_INIT,
-		.enable_reg	= OMAP1_IO_ADDRESS(ARM_IDLECT2),
-		.enable_bit	= EN_CKOUT_ARM,
-		.recalc		= &followparent_recalc,
-	},
-	.idlect_shift	= 12,
-};
-
-static struct clk sossi_ck = {
-	.name		= "ck_sossi",
-	.ops		= &clkops_generic,
-	.parent		= &ck_dpll1out.clk,
-	.flags		= CLOCK_NO_IDLE_PARENT | ENABLE_REG_32BIT,
-	.enable_reg	= OMAP1_IO_ADDRESS(MOD_CONF_CTRL_1),
-	.enable_bit	= 16,
-	.recalc		= &omap1_sossi_recalc,
-	.set_rate	= &omap1_set_sossi_rate,
-};
-
-static struct clk arm_ck = {
-	.name		= "arm_ck",
-	.ops		= &clkops_null,
-	.parent		= &ck_dpll1,
-	.rate_offset	= CKCTL_ARMDIV_OFFSET,
-	.recalc		= &omap1_ckctl_recalc,
-	.round_rate	= omap1_clk_round_rate_ckctl_arm,
-	.set_rate	= omap1_clk_set_rate_ckctl_arm,
-};
-
-static struct arm_idlect1_clk armper_ck = {
-	.clk = {
-		.name		= "armper_ck",
-		.ops		= &clkops_generic,
-		.parent		= &ck_dpll1,
-		.flags		= CLOCK_IDLE_CONTROL,
-		.enable_reg	= OMAP1_IO_ADDRESS(ARM_IDLECT2),
-		.enable_bit	= EN_PERCK,
-		.rate_offset	= CKCTL_PERDIV_OFFSET,
-		.recalc		= &omap1_ckctl_recalc,
-		.round_rate	= omap1_clk_round_rate_ckctl_arm,
-		.set_rate	= omap1_clk_set_rate_ckctl_arm,
-	},
-	.idlect_shift	= 2,
-};
-
-/*
- * FIXME: This clock seems to be necessary but no-one has asked for its
- * activation.  [ GPIO code for 1510 ]
- */
-static struct clk arm_gpio_ck = {
-	.name		= "arm_gpio_ck",
-	.ops		= &clkops_generic,
-	.parent		= &ck_dpll1,
-	.flags		= ENABLE_ON_INIT,
-	.enable_reg	= OMAP1_IO_ADDRESS(ARM_IDLECT2),
-	.enable_bit	= EN_GPIOCK,
-	.recalc		= &followparent_recalc,
-};
-
-static struct arm_idlect1_clk armxor_ck = {
-	.clk = {
-		.name		= "armxor_ck",
-		.ops		= &clkops_generic,
-		.parent		= &ck_ref,
-		.flags		= CLOCK_IDLE_CONTROL,
-		.enable_reg	= OMAP1_IO_ADDRESS(ARM_IDLECT2),
-		.enable_bit	= EN_XORPCK,
-		.recalc		= &followparent_recalc,
-	},
-	.idlect_shift	= 1,
-};
-
-static struct arm_idlect1_clk armtim_ck = {
-	.clk = {
-		.name		= "armtim_ck",
-		.ops		= &clkops_generic,
-		.parent		= &ck_ref,
-		.flags		= CLOCK_IDLE_CONTROL,
-		.enable_reg	= OMAP1_IO_ADDRESS(ARM_IDLECT2),
-		.enable_bit	= EN_TIMCK,
-		.recalc		= &followparent_recalc,
-	},
-	.idlect_shift	= 9,
-};
-
-static struct arm_idlect1_clk armwdt_ck = {
-	.clk = {
-		.name		= "armwdt_ck",
-		.ops		= &clkops_generic,
-		.parent		= &ck_ref,
-		.flags		= CLOCK_IDLE_CONTROL,
-		.enable_reg	= OMAP1_IO_ADDRESS(ARM_IDLECT2),
-		.enable_bit	= EN_WDTCK,
-		.recalc		= &omap1_watchdog_recalc,
-	},
-	.idlect_shift	= 0,
-};
-
-static struct clk arminth_ck16xx = {
-	.name		= "arminth_ck",
-	.ops		= &clkops_null,
-	.parent		= &arm_ck,
-	.recalc		= &followparent_recalc,
-	/* Note: On 16xx the frequency can be divided by 2 by programming
-	 * ARM_CKCTL:ARM_INTHCK_SEL(14) to 1
-	 *
-	 * 1510 version is in TC clocks.
-	 */
-};
-
-static struct clk dsp_ck = {
-	.name		= "dsp_ck",
-	.ops		= &clkops_generic,
-	.parent		= &ck_dpll1,
-	.enable_reg	= OMAP1_IO_ADDRESS(ARM_CKCTL),
-	.enable_bit	= EN_DSPCK,
-	.rate_offset	= CKCTL_DSPDIV_OFFSET,
-	.recalc		= &omap1_ckctl_recalc,
-	.round_rate	= omap1_clk_round_rate_ckctl_arm,
-	.set_rate	= omap1_clk_set_rate_ckctl_arm,
-};
-
-static struct clk dspmmu_ck = {
-	.name		= "dspmmu_ck",
-	.ops		= &clkops_null,
-	.parent		= &ck_dpll1,
-	.rate_offset	= CKCTL_DSPMMUDIV_OFFSET,
-	.recalc		= &omap1_ckctl_recalc,
-	.round_rate	= omap1_clk_round_rate_ckctl_arm,
-	.set_rate	= omap1_clk_set_rate_ckctl_arm,
-};
-
-static struct clk dspper_ck = {
-	.name		= "dspper_ck",
-	.ops		= &clkops_dspck,
-	.parent		= &ck_dpll1,
-	.enable_reg	= DSP_IDLECT2,
-	.enable_bit	= EN_PERCK,
-	.rate_offset	= CKCTL_PERDIV_OFFSET,
-	.recalc		= &omap1_ckctl_recalc_dsp_domain,
-	.round_rate	= omap1_clk_round_rate_ckctl_arm,
-	.set_rate	= &omap1_clk_set_rate_dsp_domain,
-};
-
-static struct clk dspxor_ck = {
-	.name		= "dspxor_ck",
-	.ops		= &clkops_dspck,
-	.parent		= &ck_ref,
-	.enable_reg	= DSP_IDLECT2,
-	.enable_bit	= EN_XORPCK,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk dsptim_ck = {
-	.name		= "dsptim_ck",
-	.ops		= &clkops_dspck,
-	.parent		= &ck_ref,
-	.enable_reg	= DSP_IDLECT2,
-	.enable_bit	= EN_DSPTIMCK,
-	.recalc		= &followparent_recalc,
-};
-
-/* Tie ARM_IDLECT1:IDLIF_ARM to this logical clock structure */
-static struct arm_idlect1_clk tc_ck = {
-	.clk = {
-		.name		= "tc_ck",
-		.ops		= &clkops_null,
-		.parent		= &ck_dpll1,
-		.flags		= CLOCK_IDLE_CONTROL,
-		.rate_offset	= CKCTL_TCDIV_OFFSET,
-		.recalc		= &omap1_ckctl_recalc,
-		.round_rate	= omap1_clk_round_rate_ckctl_arm,
-		.set_rate	= omap1_clk_set_rate_ckctl_arm,
-	},
-	.idlect_shift	= 6,
-};
-
-static struct clk arminth_ck1510 = {
-	.name		= "arminth_ck",
-	.ops		= &clkops_null,
-	.parent		= &tc_ck.clk,
-	.recalc		= &followparent_recalc,
-	/* Note: On 1510 the frequency follows TC_CK
-	 *
-	 * 16xx version is in MPU clocks.
-	 */
-};
-
-static struct clk tipb_ck = {
-	/* No-idle controlled by "tc_ck" */
-	.name		= "tipb_ck",
-	.ops		= &clkops_null,
-	.parent		= &tc_ck.clk,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk l3_ocpi_ck = {
-	/* No-idle controlled by "tc_ck" */
-	.name		= "l3_ocpi_ck",
-	.ops		= &clkops_generic,
-	.parent		= &tc_ck.clk,
-	.enable_reg	= OMAP1_IO_ADDRESS(ARM_IDLECT3),
-	.enable_bit	= EN_OCPI_CK,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk tc1_ck = {
-	.name		= "tc1_ck",
-	.ops		= &clkops_generic,
-	.parent		= &tc_ck.clk,
-	.enable_reg	= OMAP1_IO_ADDRESS(ARM_IDLECT3),
-	.enable_bit	= EN_TC1_CK,
-	.recalc		= &followparent_recalc,
-};
-
-/*
- * FIXME: This clock seems to be necessary but no-one has asked for its
- * activation.  [ pm.c (SRAM), CCP, Camera ]
- */
-static struct clk tc2_ck = {
-	.name		= "tc2_ck",
-	.ops		= &clkops_generic,
-	.parent		= &tc_ck.clk,
-	.flags		= ENABLE_ON_INIT,
-	.enable_reg	= OMAP1_IO_ADDRESS(ARM_IDLECT3),
-	.enable_bit	= EN_TC2_CK,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk dma_ck = {
-	/* No-idle controlled by "tc_ck" */
-	.name		= "dma_ck",
-	.ops		= &clkops_null,
-	.parent		= &tc_ck.clk,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk dma_lcdfree_ck = {
-	.name		= "dma_lcdfree_ck",
-	.ops		= &clkops_null,
-	.parent		= &tc_ck.clk,
-	.recalc		= &followparent_recalc,
-};
-
-static struct arm_idlect1_clk api_ck = {
-	.clk = {
-		.name		= "api_ck",
-		.ops		= &clkops_generic,
-		.parent		= &tc_ck.clk,
-		.flags		= CLOCK_IDLE_CONTROL,
-		.enable_reg	= OMAP1_IO_ADDRESS(ARM_IDLECT2),
-		.enable_bit	= EN_APICK,
-		.recalc		= &followparent_recalc,
-	},
-	.idlect_shift	= 8,
-};
-
-static struct arm_idlect1_clk lb_ck = {
-	.clk = {
-		.name		= "lb_ck",
-		.ops		= &clkops_generic,
-		.parent		= &tc_ck.clk,
-		.flags		= CLOCK_IDLE_CONTROL,
-		.enable_reg	= OMAP1_IO_ADDRESS(ARM_IDLECT2),
-		.enable_bit	= EN_LBCK,
-		.recalc		= &followparent_recalc,
-	},
-	.idlect_shift	= 4,
-};
-
-static struct clk rhea1_ck = {
-	.name		= "rhea1_ck",
-	.ops		= &clkops_null,
-	.parent		= &tc_ck.clk,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk rhea2_ck = {
-	.name		= "rhea2_ck",
-	.ops		= &clkops_null,
-	.parent		= &tc_ck.clk,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk lcd_ck_16xx = {
-	.name		= "lcd_ck",
-	.ops		= &clkops_generic,
-	.parent		= &ck_dpll1,
-	.enable_reg	= OMAP1_IO_ADDRESS(ARM_IDLECT2),
-	.enable_bit	= EN_LCDCK,
-	.rate_offset	= CKCTL_LCDDIV_OFFSET,
-	.recalc		= &omap1_ckctl_recalc,
-	.round_rate	= omap1_clk_round_rate_ckctl_arm,
-	.set_rate	= omap1_clk_set_rate_ckctl_arm,
-};
-
-static struct arm_idlect1_clk lcd_ck_1510 = {
-	.clk = {
-		.name		= "lcd_ck",
-		.ops		= &clkops_generic,
-		.parent		= &ck_dpll1,
-		.flags		= CLOCK_IDLE_CONTROL,
-		.enable_reg	= OMAP1_IO_ADDRESS(ARM_IDLECT2),
-		.enable_bit	= EN_LCDCK,
-		.rate_offset	= CKCTL_LCDDIV_OFFSET,
-		.recalc		= &omap1_ckctl_recalc,
-		.round_rate	= omap1_clk_round_rate_ckctl_arm,
-		.set_rate	= omap1_clk_set_rate_ckctl_arm,
-	},
-	.idlect_shift	= 3,
-};
-
-static struct clk uart1_1510 = {
-	.name		= "uart1_ck",
-	.ops		= &clkops_null,
-	/* Direct from ULPD, no real parent */
-	.parent		= &armper_ck.clk,
-	.rate		= 12000000,
-	.flags		= ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
-	.enable_reg	= OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
-	.enable_bit	= 29,	/* Chooses between 12MHz and 48MHz */
-	.set_rate	= &omap1_set_uart_rate,
-	.recalc		= &omap1_uart_recalc,
-};
-
-static struct uart_clk uart1_16xx = {
-	.clk	= {
-		.name		= "uart1_ck",
-		.ops		= &clkops_uart,
-		/* Direct from ULPD, no real parent */
-		.parent		= &armper_ck.clk,
-		.rate		= 48000000,
-		.flags		= RATE_FIXED | ENABLE_REG_32BIT |
-				  CLOCK_NO_IDLE_PARENT,
-		.enable_reg	= OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
-		.enable_bit	= 29,
-	},
-	.sysc_addr	= 0xfffb0054,
-};
-
-static struct clk uart2_ck = {
-	.name		= "uart2_ck",
-	.ops		= &clkops_null,
-	/* Direct from ULPD, no real parent */
-	.parent		= &armper_ck.clk,
-	.rate		= 12000000,
-	.flags		= ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
-	.enable_reg	= OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
-	.enable_bit	= 30,	/* Chooses between 12MHz and 48MHz */
-	.set_rate	= &omap1_set_uart_rate,
-	.recalc		= &omap1_uart_recalc,
-};
-
-static struct clk uart3_1510 = {
-	.name		= "uart3_ck",
-	.ops		= &clkops_null,
-	/* Direct from ULPD, no real parent */
-	.parent		= &armper_ck.clk,
-	.rate		= 12000000,
-	.flags		= ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
-	.enable_reg	= OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
-	.enable_bit	= 31,	/* Chooses between 12MHz and 48MHz */
-	.set_rate	= &omap1_set_uart_rate,
-	.recalc		= &omap1_uart_recalc,
-};
-
-static struct uart_clk uart3_16xx = {
-	.clk	= {
-		.name		= "uart3_ck",
-		.ops		= &clkops_uart,
-		/* Direct from ULPD, no real parent */
-		.parent		= &armper_ck.clk,
-		.rate		= 48000000,
-		.flags		= RATE_FIXED | ENABLE_REG_32BIT |
-				  CLOCK_NO_IDLE_PARENT,
-		.enable_reg	= OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
-		.enable_bit	= 31,
-	},
-	.sysc_addr	= 0xfffb9854,
-};
-
-static struct clk usb_clko = {	/* 6 MHz output on W4_USB_CLKO */
-	.name		= "usb_clko",
-	.ops		= &clkops_generic,
-	/* Direct from ULPD, no parent */
-	.rate		= 6000000,
-	.flags		= RATE_FIXED | ENABLE_REG_32BIT,
-	.enable_reg	= OMAP1_IO_ADDRESS(ULPD_CLOCK_CTRL),
-	.enable_bit	= USB_MCLK_EN_BIT,
-};
-
-static struct clk usb_hhc_ck1510 = {
-	.name		= "usb_hhc_ck",
-	.ops		= &clkops_generic,
-	/* Direct from ULPD, no parent */
-	.rate		= 48000000, /* Actually 2 clocks, 12MHz and 48MHz */
-	.flags		= RATE_FIXED | ENABLE_REG_32BIT,
-	.enable_reg	= OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
-	.enable_bit	= USB_HOST_HHC_UHOST_EN,
-};
-
-static struct clk usb_hhc_ck16xx = {
-	.name		= "usb_hhc_ck",
-	.ops		= &clkops_generic,
-	/* Direct from ULPD, no parent */
-	.rate		= 48000000,
-	/* OTG_SYSCON_2.OTG_PADEN == 0 (not 1510-compatible) */
-	.flags		= RATE_FIXED | ENABLE_REG_32BIT,
-	.enable_reg	= OMAP1_IO_ADDRESS(OTG_BASE + 0x08), /* OTG_SYSCON_2 */
-	.enable_bit	= 8 /* UHOST_EN */,
-};
-
-static struct clk usb_dc_ck = {
-	.name		= "usb_dc_ck",
-	.ops		= &clkops_generic,
-	/* Direct from ULPD, no parent */
-	.rate		= 48000000,
-	.flags		= RATE_FIXED,
-	.enable_reg	= OMAP1_IO_ADDRESS(SOFT_REQ_REG),
-	.enable_bit	= 4,
-};
-
-static struct clk usb_dc_ck7xx = {
-	.name		= "usb_dc_ck",
-	.ops		= &clkops_generic,
-	/* Direct from ULPD, no parent */
-	.rate		= 48000000,
-	.flags		= RATE_FIXED,
-	.enable_reg	= OMAP1_IO_ADDRESS(SOFT_REQ_REG),
-	.enable_bit	= 8,
-};
-
-static struct clk mclk_1510 = {
-	.name		= "mclk",
-	.ops		= &clkops_generic,
-	/* Direct from ULPD, no parent. May be enabled by ext hardware. */
-	.rate		= 12000000,
-	.flags		= RATE_FIXED,
-	.enable_reg	= OMAP1_IO_ADDRESS(SOFT_REQ_REG),
-	.enable_bit	= 6,
-};
-
-static struct clk mclk_16xx = {
-	.name		= "mclk",
-	.ops		= &clkops_generic,
-	/* Direct from ULPD, no parent. May be enabled by ext hardware. */
-	.enable_reg	= OMAP1_IO_ADDRESS(COM_CLK_DIV_CTRL_SEL),
-	.enable_bit	= COM_ULPD_PLL_CLK_REQ,
-	.set_rate	= &omap1_set_ext_clk_rate,
-	.round_rate	= &omap1_round_ext_clk_rate,
-	.init		= &omap1_init_ext_clk,
-};
-
-static struct clk bclk_1510 = {
-	.name		= "bclk",
-	.ops		= &clkops_generic,
-	/* Direct from ULPD, no parent. May be enabled by ext hardware. */
-	.rate		= 12000000,
-	.flags		= RATE_FIXED,
-};
-
-static struct clk bclk_16xx = {
-	.name		= "bclk",
-	.ops		= &clkops_generic,
-	/* Direct from ULPD, no parent. May be enabled by ext hardware. */
-	.enable_reg	= OMAP1_IO_ADDRESS(SWD_CLK_DIV_CTRL_SEL),
-	.enable_bit	= SWD_ULPD_PLL_CLK_REQ,
-	.set_rate	= &omap1_set_ext_clk_rate,
-	.round_rate	= &omap1_round_ext_clk_rate,
-	.init		= &omap1_init_ext_clk,
-};
-
-static struct clk mmc1_ck = {
-	.name		= "mmc_ck",
-	.ops		= &clkops_generic,
-	/* Functional clock is direct from ULPD, interface clock is ARMPER */
-	.parent		= &armper_ck.clk,
-	.rate		= 48000000,
-	.flags		= RATE_FIXED | ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
-	.enable_reg	= OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
-	.enable_bit	= 23,
-};
-
-static struct clk mmc2_ck = {
-	.name		= "mmc_ck",
-	.id		= 1,
-	.ops		= &clkops_generic,
-	/* Functional clock is direct from ULPD, interface clock is ARMPER */
-	.parent		= &armper_ck.clk,
-	.rate		= 48000000,
-	.flags		= RATE_FIXED | ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
-	.enable_reg	= OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
-	.enable_bit	= 20,
-};
-
-static struct clk mmc3_ck = {
-	.name		= "mmc_ck",
-	.id		= 2,
-	.ops		= &clkops_generic,
-	/* Functional clock is direct from ULPD, interface clock is ARMPER */
-	.parent		= &armper_ck.clk,
-	.rate		= 48000000,
-	.flags		= RATE_FIXED | ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
-	.enable_reg	= OMAP1_IO_ADDRESS(SOFT_REQ_REG),
-	.enable_bit	= 12,
-};
-
-static struct clk virtual_ck_mpu = {
-	.name		= "mpu",
-	.ops		= &clkops_null,
-	.parent		= &arm_ck, /* Is smarter alias for */
-	.recalc		= &followparent_recalc,
-	.set_rate	= &omap1_select_table_rate,
-	.round_rate	= &omap1_round_to_table_rate,
-};
-
-/* virtual functional clock domain for I2C. Just for making sure that ARMXOR_CK
-remains active during MPU idle whenever this is enabled */
-static struct clk i2c_fck = {
-	.name		= "i2c_fck",
-	.id		= 1,
-	.ops		= &clkops_null,
-	.flags		= CLOCK_NO_IDLE_PARENT,
-	.parent		= &armxor_ck.clk,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk i2c_ick = {
-	.name		= "i2c_ick",
-	.id		= 1,
-	.ops		= &clkops_null,
-	.flags		= CLOCK_NO_IDLE_PARENT,
-	.parent		= &armper_ck.clk,
-	.recalc		= &followparent_recalc,
-};
+extern const struct clkops clkops_dspck;
+extern const struct clkops clkops_dummy;
+extern const struct clkops clkops_uart;
+extern const struct clkops clkops_generic;
 
 #endif