Merge tag 'omap-cleanup-b2-for-3.8' of git://git.kernel.org/pub/scm/linux/kernel/git/pjw/omap-pending into omap-for-v3.8/cleanup-prcm

Second set of OMAP PRCM cleanups for 3.8.

These patches remove the use of omap_prcm_get_reset_sources() from the
OMAP watchdog driver, and remove mach-omap2/prcm.c and
plat-omap/include/plat/prcm.h.

Basic test logs for this branch on top of Tony's cleanup-prcm branch
at commit 7fc54fd3084457c7f11b9e2e1e3fcd19a3badc33 are here:

    http://www.pwsan.com/omap/testlogs/prcm_cleanup_b_3.8/20121108151646/

However, cleanup-prcm at 7fc54fd3 does not include some fixes
that are needed for a successful test.  With several reverts,
fixes, and workarounds applied, the following test logs were
obtained:

    http://www.pwsan.com/omap/testlogs/TEST_prcm_cleanup_b_3.8/20121108151930/

 which indicate that the series tests cleanly.

This second pull request updates one of the patches which broke
with rmk's allnoconfigs, and also updates the tag description to
indicate that 7fc54fd3 is building cleanly here.

1 files changed, 60 insertions, 10 deletions

diff --git a/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c b/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c
index c66276b2bf0a..b9b981bac9d3 100644
--- a/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c
+++ b/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c
@@ -1,7 +1,7 @@
 /*
  * OMAP2xxx DVFS virtual clock functions
  *
- * Copyright (C) 2005-2008 Texas Instruments, Inc.
+ * Copyright (C) 2005-2008, 2012 Texas Instruments, Inc.
  * Copyright (C) 2004-2010 Nokia Corporation
  *
  * Contacts:
@@ -39,13 +39,20 @@
 #include "clock.h"
 #include "clock2xxx.h"
 #include "opp2xxx.h"
-#include "cm2xxx_3xxx.h"
+#include "cm2xxx.h"
 #include "cm-regbits-24xx.h"
 #include "sdrc.h"
 
 const struct prcm_config *curr_prcm_set;
 const struct prcm_config *rate_table;
 
+/*
+ * sys_ck_rate: the rate of the external high-frequency clock
+ * oscillator on the board.  Set by the SoC-specific clock init code.
+ * Once set during a boot, will not change.
+ */
+static unsigned long sys_ck_rate;
+
 /**
  * omap2_table_mpu_recalc - just return the MPU speed
  * @clk: virt_prcm_set struct clk
@@ -67,15 +74,14 @@ unsigned long omap2_table_mpu_recalc(struct clk *clk)
 long omap2_round_to_table_rate(struct clk *clk, unsigned long rate)
 {
 	const struct prcm_config *ptr;
-	long highest_rate, sys_clk_rate;
+	long highest_rate;
 
 	highest_rate = -EINVAL;
-	sys_clk_rate = __clk_get_rate(sclk);
 
 	for (ptr = rate_table; ptr->mpu_speed; ptr++) {
 		if (!(ptr->flags & cpu_mask))
 			continue;
-		if (ptr->xtal_speed != sys_clk_rate)
+		if (ptr->xtal_speed != sys_ck_rate)
 			continue;
 
 		highest_rate = ptr->mpu_speed;
@@ -94,15 +100,12 @@ int omap2_select_table_rate(struct clk *clk, unsigned long rate)
 	const struct prcm_config *prcm;
 	unsigned long found_speed = 0;
 	unsigned long flags;
-	long sys_clk_rate;
-
-	sys_clk_rate = __clk_get_rate(sclk);
 
 	for (prcm = rate_table; prcm->mpu_speed; prcm++) {
 		if (!(prcm->flags & cpu_mask))
 			continue;
 
-		if (prcm->xtal_speed != sys_clk_rate)
+		if (prcm->xtal_speed != sys_ck_rate)
 			continue;
 
 		if (prcm->mpu_speed <= rate) {
@@ -118,7 +121,7 @@ int omap2_select_table_rate(struct clk *clk, unsigned long rate)
 	}
 
 	curr_prcm_set = prcm;
-	cur_rate = omap2xxx_clk_get_core_rate(dclk);
+	cur_rate = omap2xxx_clk_get_core_rate();
 
 	if (prcm->dpll_speed == cur_rate / 2) {
 		omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL, 1);
@@ -168,3 +171,50 @@ int omap2_select_table_rate(struct clk *clk, unsigned long rate)
 
 	return 0;
 }
+
+/**
+ * omap2xxx_clkt_vps_check_bootloader_rate - determine which of the rate
+ * table sets matches the current CORE DPLL hardware rate
+ *
+ * Check the MPU rate set by bootloader.  Sets the 'curr_prcm_set'
+ * global to point to the active rate set when found; otherwise, sets
+ * it to NULL.  No return value;
+ */
+void omap2xxx_clkt_vps_check_bootloader_rates(void)
+{
+	const struct prcm_config *prcm = NULL;
+	unsigned long rate;
+
+	rate = omap2xxx_clk_get_core_rate();
+	for (prcm = rate_table; prcm->mpu_speed; prcm++) {
+		if (!(prcm->flags & cpu_mask))
+			continue;
+		if (prcm->xtal_speed != sys_ck_rate)
+			continue;
+		if (prcm->dpll_speed <= rate)
+			break;
+	}
+	curr_prcm_set = prcm;
+}
+
+/**
+ * omap2xxx_clkt_vps_late_init - store a copy of the sys_ck rate
+ *
+ * Store a copy of the sys_ck rate for later use by the OMAP2xxx DVFS
+ * code.  (The sys_ck rate does not -- or rather, must not -- change
+ * during kernel runtime.)  Must be called after we have a valid
+ * sys_ck rate, but before the virt_prcm_set clock rate is
+ * recalculated.  No return value.
+ */
+void omap2xxx_clkt_vps_late_init(void)
+{
+	struct clk *c;
+
+	c = clk_get(NULL, "sys_ck");
+	if (IS_ERR(c)) {
+		WARN(1, "could not locate sys_ck\n");
+	} else {
+		sys_ck_rate = clk_get_rate(c);
+		clk_put(c);
+	}
+}