Merge tag 'drm-next-2021-11-03' of git://anongit.freedesktop.org/drm/drm

Pull drm updates from Dave Airlie:
 "Summary below. i915 starts to add support for DG2 GPUs, enables DG1
  and ADL-S support by default, lots of work to enable DisplayPort 2.0
  across drivers. Lots of documentation updates and fixes across the
  board.

  core:
   - improve dma_fence, lease and resv documentation
   - shmem-helpers: allocate WC pages on x86, use vmf_insert_pin
   - sched fixes/improvements
   - allow empty drm leases
   - add dma resv iterator
   - add more DP 2.0 headers
   - DP MST helper improvements for DP2.0

  dma-buf:
   - avoid warnings, remove fence trace macros

  bridge:
   - new helper to get rid of panels
   - probe improvements for it66121
   - enable DSI EOTP for anx7625

  fbdev:
   - efifb: release runtime PM on destroy

  ttm:
   - kerneldoc switch
   - helper to clear all DMA mappings
   - pool shrinker optimizaton
   - remove ttm_tt_destroy_common
   - update ttm_move_memcpy for async use

  panel:
   - add new panel-edp driver

  amdgpu:
   - Initial DP 2.0 support
   - Initial USB4 DP tunnelling support
   - Aldebaran MCE support
   - Modifier support for DCC image stores for GFX 10.3
   - Display rework for better FP code handling
   - Yellow Carp/Cyan Skillfish updates
   - Cyan Skillfish display support
   - convert vega/navi to IP discovery asic enumeration
   - validate IP discovery table
   - RAS improvements
   - Lots of fixes

  i915:
   - DG1 PCI IDs + LMEM discovery/placement
   - DG1 GuC submission by default
   - ADL-S PCI IDs updated + enabled by default
   - ADL-P (XE_LPD) fixed and updates
   - DG2 display fixes
   - PXP protected object support for Gen12 integrated
   - expose multi-LRC submission interface for GuC
   - export logical engine instance to user
   - Disable engine bonding on Gen12+
   - PSR cleanup
   - PSR2 selective fetch by default
   - DP 2.0 prep work
   - VESA vendor block + MSO use of it
   - FBC refactor
   - try again to fix fast-narrow vs slow-wide eDP training
   - use THP when IOMMU enabled
   - LMEM backup/restore for suspend/resume
   - locking simplification
   - GuC major reworking
   - async flip VT-D workaround changes
   - DP link training improvements
   - misc display refactorings

  bochs:
   - new PCI ID

  rcar-du:
   - Non-contiguious buffer import support for rcar-du
   - r8a779a0 support prep

  omapdrm:
   - COMPILE_TEST fixes

  sti:
   - COMPILE_TEST fixes

  msm:
   - fence ordering improvements
   - eDP support in DP sub-driver
   - dpu irq handling cleanup
   - CRC support for making igt happy
   - NO_CONNECTOR bridge support
   - dsi: 14nm phy support for msm8953
   - mdp5: msm8x53, sdm450, sdm632 support

  stm:
   - layer alpha + zpo support

  v3d:
   - fix Vulkan CTS failure
   - support multiple sync objects

  gud:
   - add R8/RGB332/RGB888 pixel formats

  vc4:
   - convert to new bridge helpers

  vgem:
   - use shmem helpers

  virtio:
   - support mapping exported vram

  zte:
   - remove obsolete driver

  rockchip:
   - use bridge attach no connector for LVDS/RGB"

* tag 'drm-next-2021-11-03' of git://anongit.freedesktop.org/drm/drm: (1259 commits)
  drm/amdgpu/gmc6: fix DMA mask from 44 to 40 bits
  drm/amd/display: MST support for DPIA
  drm/amdgpu: Fix even more out of bound writes from debugfs
  drm/amdgpu/discovery: add SDMA IP instance info for soc15 parts
  drm/amdgpu/discovery: add UVD/VCN IP instance info for soc15 parts
  drm/amdgpu/UAPI: rearrange header to better align related items
  drm/amd/display: Enable dpia in dmub only for DCN31 B0
  drm/amd/display: Fix USB4 hot plug crash issue
  drm/amd/display: Fix deadlock when falling back to v2 from v3
  drm/amd/display: Fallback to clocks which meet requested voltage on DCN31
  drm/amd/display: move FPU associated DCN301 code to DML folder
  drm/amd/display: fix link training regression for 1 or 2 lane
  drm/amd/display: add two lane settings training options
  drm/amd/display: decouple hw_lane_settings from dpcd_lane_settings
  drm/amd/display: implement decide lane settings
  drm/amd/display: adopt DP2.0 LT SCR revision 8
  drm/amd/display: FEC configuration for dpia links in MST mode
  drm/amd/display: FEC configuration for dpia links
  drm/amd/display: Add workaround flag for EDID read on certain docks
  drm/amd/display: Set phy_mux_sel bit in dmub scratch register
  ...

1 files changed, 31 insertions, 18 deletions

diff --git a/drivers/gpu/drm/i915/display/intel_dp_mst.c b/drivers/gpu/drm/i915/display/intel_dp_mst.c
index 8d13d7b26a25..89d701e8ae9d 100644
--- a/drivers/gpu/drm/i915/display/intel_dp_mst.c
+++ b/drivers/gpu/drm/i915/display/intel_dp_mst.c
@@ -61,7 +61,7 @@ static int intel_dp_mst_compute_link_config(struct intel_encoder *encoder,
 	int bpp, slots = -EINVAL;
 
 	crtc_state->lane_count = limits->max_lane_count;
-	crtc_state->port_clock = limits->max_clock;
+	crtc_state->port_clock = limits->max_rate;
 
 	for (bpp = limits->max_bpp; bpp >= limits->min_bpp; bpp -= 2 * 3) {
 		crtc_state->pipe_bpp = bpp;
@@ -131,8 +131,8 @@ static int intel_dp_mst_compute_config(struct intel_encoder *encoder,
 	 * for MST we always configure max link bw - the spec doesn't
 	 * seem to suggest we should do otherwise.
 	 */
-	limits.min_clock =
-	limits.max_clock = intel_dp_max_link_rate(intel_dp);
+	limits.min_rate =
+	limits.max_rate = intel_dp_max_link_rate(intel_dp);
 
 	limits.min_lane_count =
 	limits.max_lane_count = intel_dp_max_lane_count(intel_dp);
@@ -378,7 +378,7 @@ static void intel_mst_disable_dp(struct intel_atomic_state *state,
 
 	drm_dp_mst_reset_vcpi_slots(&intel_dp->mst_mgr, connector->port);
 
-	ret = drm_dp_update_payload_part1(&intel_dp->mst_mgr);
+	ret = drm_dp_update_payload_part1(&intel_dp->mst_mgr, 1);
 	if (ret) {
 		drm_dbg_kms(&i915->drm, "failed to update payload %d\n", ret);
 	}
@@ -396,7 +396,6 @@ static void intel_mst_post_disable_dp(struct intel_atomic_state *state,
 		to_intel_connector(old_conn_state->connector);
 	struct drm_i915_private *dev_priv = to_i915(connector->base.dev);
 	bool last_mst_stream;
-	u32 val;
 
 	intel_dp->active_mst_links--;
 	last_mst_stream = intel_dp->active_mst_links == 0;
@@ -406,18 +405,14 @@ static void intel_mst_post_disable_dp(struct intel_atomic_state *state,
 
 	intel_crtc_vblank_off(old_crtc_state);
 
-	intel_disable_pipe(old_crtc_state);
+	intel_disable_transcoder(old_crtc_state);
 
 	drm_dp_update_payload_part2(&intel_dp->mst_mgr);
 
 	clear_act_sent(encoder, old_crtc_state);
 
-	val = intel_de_read(dev_priv,
-			    TRANS_DDI_FUNC_CTL(old_crtc_state->cpu_transcoder));
-	val &= ~TRANS_DDI_DP_VC_PAYLOAD_ALLOC;
-	intel_de_write(dev_priv,
-		       TRANS_DDI_FUNC_CTL(old_crtc_state->cpu_transcoder),
-		       val);
+	intel_de_rmw(dev_priv, TRANS_DDI_FUNC_CTL(old_crtc_state->cpu_transcoder),
+		     TRANS_DDI_DP_VC_PAYLOAD_ALLOC, 0);
 
 	wait_for_act_sent(encoder, old_crtc_state);
 
@@ -523,7 +518,7 @@ static void intel_mst_pre_enable_dp(struct intel_atomic_state *state,
 
 	intel_dp->active_mst_links++;
 
-	ret = drm_dp_update_payload_part1(&intel_dp->mst_mgr);
+	ret = drm_dp_update_payload_part1(&intel_dp->mst_mgr, 1);
 
 	/*
 	 * Before Gen 12 this is not done as part of
@@ -555,6 +550,17 @@ static void intel_mst_enable_dp(struct intel_atomic_state *state,
 
 	clear_act_sent(encoder, pipe_config);
 
+	if (intel_dp_is_uhbr(pipe_config)) {
+		const struct drm_display_mode *adjusted_mode =
+			&pipe_config->hw.adjusted_mode;
+		u64 crtc_clock_hz = KHz(adjusted_mode->crtc_clock);
+
+		intel_de_write(dev_priv, TRANS_DP2_VFREQHIGH(pipe_config->cpu_transcoder),
+			       TRANS_DP2_VFREQ_PIXEL_CLOCK(crtc_clock_hz >> 24));
+		intel_de_write(dev_priv, TRANS_DP2_VFREQLOW(pipe_config->cpu_transcoder),
+			       TRANS_DP2_VFREQ_PIXEL_CLOCK(crtc_clock_hz & 0xffffff));
+	}
+
 	intel_ddi_enable_transcoder_func(encoder, pipe_config);
 
 	intel_de_rmw(dev_priv, TRANS_DDI_FUNC_CTL(trans), 0,
@@ -571,7 +577,7 @@ static void intel_mst_enable_dp(struct intel_atomic_state *state,
 		intel_de_rmw(dev_priv, CHICKEN_TRANS(trans), 0,
 			     FECSTALL_DIS_DPTSTREAM_DPTTG);
 
-	intel_enable_pipe(pipe_config);
+	intel_enable_transcoder(pipe_config);
 
 	intel_crtc_vblank_on(pipe_config);
 
@@ -971,24 +977,31 @@ intel_dp_mst_encoder_init(struct intel_digital_port *dig_port, int conn_base_id)
 					   dig_port->max_lanes,
 					   max_source_rate,
 					   conn_base_id);
-	if (ret)
+	if (ret) {
+		intel_dp->mst_mgr.cbs = NULL;
 		return ret;
-
-	intel_dp->can_mst = true;
+	}
 
 	return 0;
 }
 
+bool intel_dp_mst_source_support(struct intel_dp *intel_dp)
+{
+	return intel_dp->mst_mgr.cbs;
+}
+
 void
 intel_dp_mst_encoder_cleanup(struct intel_digital_port *dig_port)
 {
 	struct intel_dp *intel_dp = &dig_port->dp;
 
-	if (!intel_dp->can_mst)
+	if (!intel_dp_mst_source_support(intel_dp))
 		return;
 
 	drm_dp_mst_topology_mgr_destroy(&intel_dp->mst_mgr);
 	/* encoders will get killed by normal cleanup */
+
+	intel_dp->mst_mgr.cbs = NULL;
 }
 
 bool intel_dp_mst_is_master_trans(const struct intel_crtc_state *crtc_state)