Merge branch 'drm-core-next' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6

* 'drm-core-next' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (390 commits)
  drm/radeon/kms: disable underscan by default
  drm/radeon/kms: only enable hdmi features if the monitor supports audio
  drm: Restore the old_fb upon modeset failure
  drm/nouveau: fix hwmon device binding
  radeon: consolidate asic-specific function decls for pre-r600
  vga_switcheroo: comparing too few characters in strncmp()
  drm/radeon/kms: add NI pci ids
  drm/radeon/kms: don't enable pcie gen2 on NI yet
  drm/radeon/kms: add radeon_asic struct for NI asics
  drm/radeon/kms/ni: load default sclk/mclk/vddc at pm init
  drm/radeon/kms: add ucode loader for NI
  drm/radeon/kms: add support for DCE5 display LUTs
  drm/radeon/kms: add ni_reg.h
  drm/radeon/kms: add bo blit support for NI
  drm/radeon/kms: always use writeback/events for fences on NI
  drm/radeon/kms: adjust default clock/vddc tracking for pm on DCE5
  drm/radeon/kms: add backend map workaround for barts
  drm/radeon/kms: fill gpu init for NI asics
  drm/radeon/kms: add disabled vbios accessor for NI asics
  drm/radeon/kms: handle NI thermal controller
  ...

1 files changed, 28 insertions, 15 deletions

diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c
index 25bcedf386fd..aa2307080be2 100644
--- a/drivers/gpu/drm/i915/intel_lvds.c
+++ b/drivers/gpu/drm/i915/intel_lvds.c
@@ -304,14 +304,13 @@ static bool intel_lvds_mode_fixup(struct drm_encoder *encoder,
 			u32 scaled_width = adjusted_mode->hdisplay * mode->vdisplay;
 			u32 scaled_height = mode->hdisplay * adjusted_mode->vdisplay;
 
-			pfit_control |= PFIT_ENABLE;
 			/* 965+ is easy, it does everything in hw */
 			if (scaled_width > scaled_height)
-				pfit_control |= PFIT_SCALING_PILLAR;
+				pfit_control |= PFIT_ENABLE | PFIT_SCALING_PILLAR;
 			else if (scaled_width < scaled_height)
-				pfit_control |= PFIT_SCALING_LETTER;
-			else
-				pfit_control |= PFIT_SCALING_AUTO;
+				pfit_control |= PFIT_ENABLE | PFIT_SCALING_LETTER;
+			else if (adjusted_mode->hdisplay != mode->hdisplay)
+				pfit_control |= PFIT_ENABLE | PFIT_SCALING_AUTO;
 		} else {
 			u32 scaled_width = adjusted_mode->hdisplay * mode->vdisplay;
 			u32 scaled_height = mode->hdisplay * adjusted_mode->vdisplay;
@@ -358,13 +357,17 @@ static bool intel_lvds_mode_fixup(struct drm_encoder *encoder,
 		 * Full scaling, even if it changes the aspect ratio.
 		 * Fortunately this is all done for us in hw.
 		 */
-		pfit_control |= PFIT_ENABLE;
-		if (INTEL_INFO(dev)->gen >= 4)
-			pfit_control |= PFIT_SCALING_AUTO;
-		else
-			pfit_control |= (VERT_AUTO_SCALE | HORIZ_AUTO_SCALE |
-					 VERT_INTERP_BILINEAR |
-					 HORIZ_INTERP_BILINEAR);
+		if (mode->vdisplay != adjusted_mode->vdisplay ||
+		    mode->hdisplay != adjusted_mode->hdisplay) {
+			pfit_control |= PFIT_ENABLE;
+			if (INTEL_INFO(dev)->gen >= 4)
+				pfit_control |= PFIT_SCALING_AUTO;
+			else
+				pfit_control |= (VERT_AUTO_SCALE |
+						 VERT_INTERP_BILINEAR |
+						 HORIZ_AUTO_SCALE |
+						 HORIZ_INTERP_BILINEAR);
+		}
 		break;
 
 	default:
@@ -914,6 +917,8 @@ bool intel_lvds_init(struct drm_device *dev)
 
 	intel_encoder->clone_mask = (1 << INTEL_LVDS_CLONE_BIT);
 	intel_encoder->crtc_mask = (1 << 1);
+	if (INTEL_INFO(dev)->gen >= 5)
+		intel_encoder->crtc_mask |= (1 << 0);
 	drm_encoder_helper_add(encoder, &intel_lvds_helper_funcs);
 	drm_connector_helper_add(connector, &intel_lvds_connector_helper_funcs);
 	connector->display_info.subpixel_order = SubPixelHorizontalRGB;
@@ -1019,10 +1024,18 @@ bool intel_lvds_init(struct drm_device *dev)
 out:
 	if (HAS_PCH_SPLIT(dev)) {
 		u32 pwm;
-		/* make sure PWM is enabled */
+
+		pipe = (I915_READ(PCH_LVDS) & LVDS_PIPEB_SELECT) ? 1 : 0;
+
+		/* make sure PWM is enabled and locked to the LVDS pipe */
 		pwm = I915_READ(BLC_PWM_CPU_CTL2);
-		pwm |= (PWM_ENABLE | PWM_PIPE_B);
-		I915_WRITE(BLC_PWM_CPU_CTL2, pwm);
+		if (pipe == 0 && (pwm & PWM_PIPE_B))
+			I915_WRITE(BLC_PWM_CPU_CTL2, pwm & ~PWM_ENABLE);
+		if (pipe)
+			pwm |= PWM_PIPE_B;
+		else
+			pwm &= ~PWM_PIPE_B;
+		I915_WRITE(BLC_PWM_CPU_CTL2, pwm | PWM_ENABLE);
 
 		pwm = I915_READ(BLC_PWM_PCH_CTL1);
 		pwm |= PWM_PCH_ENABLE;