Merge tag 'drm-next-2021-11-03' of git://anongit.freedesktop.org/drm/drm

Pull drm updates from Dave Airlie:
 "Summary below. i915 starts to add support for DG2 GPUs, enables DG1
  and ADL-S support by default, lots of work to enable DisplayPort 2.0
  across drivers. Lots of documentation updates and fixes across the
  board.

  core:
   - improve dma_fence, lease and resv documentation
   - shmem-helpers: allocate WC pages on x86, use vmf_insert_pin
   - sched fixes/improvements
   - allow empty drm leases
   - add dma resv iterator
   - add more DP 2.0 headers
   - DP MST helper improvements for DP2.0

  dma-buf:
   - avoid warnings, remove fence trace macros

  bridge:
   - new helper to get rid of panels
   - probe improvements for it66121
   - enable DSI EOTP for anx7625

  fbdev:
   - efifb: release runtime PM on destroy

  ttm:
   - kerneldoc switch
   - helper to clear all DMA mappings
   - pool shrinker optimizaton
   - remove ttm_tt_destroy_common
   - update ttm_move_memcpy for async use

  panel:
   - add new panel-edp driver

  amdgpu:
   - Initial DP 2.0 support
   - Initial USB4 DP tunnelling support
   - Aldebaran MCE support
   - Modifier support for DCC image stores for GFX 10.3
   - Display rework for better FP code handling
   - Yellow Carp/Cyan Skillfish updates
   - Cyan Skillfish display support
   - convert vega/navi to IP discovery asic enumeration
   - validate IP discovery table
   - RAS improvements
   - Lots of fixes

  i915:
   - DG1 PCI IDs + LMEM discovery/placement
   - DG1 GuC submission by default
   - ADL-S PCI IDs updated + enabled by default
   - ADL-P (XE_LPD) fixed and updates
   - DG2 display fixes
   - PXP protected object support for Gen12 integrated
   - expose multi-LRC submission interface for GuC
   - export logical engine instance to user
   - Disable engine bonding on Gen12+
   - PSR cleanup
   - PSR2 selective fetch by default
   - DP 2.0 prep work
   - VESA vendor block + MSO use of it
   - FBC refactor
   - try again to fix fast-narrow vs slow-wide eDP training
   - use THP when IOMMU enabled
   - LMEM backup/restore for suspend/resume
   - locking simplification
   - GuC major reworking
   - async flip VT-D workaround changes
   - DP link training improvements
   - misc display refactorings

  bochs:
   - new PCI ID

  rcar-du:
   - Non-contiguious buffer import support for rcar-du
   - r8a779a0 support prep

  omapdrm:
   - COMPILE_TEST fixes

  sti:
   - COMPILE_TEST fixes

  msm:
   - fence ordering improvements
   - eDP support in DP sub-driver
   - dpu irq handling cleanup
   - CRC support for making igt happy
   - NO_CONNECTOR bridge support
   - dsi: 14nm phy support for msm8953
   - mdp5: msm8x53, sdm450, sdm632 support

  stm:
   - layer alpha + zpo support

  v3d:
   - fix Vulkan CTS failure
   - support multiple sync objects

  gud:
   - add R8/RGB332/RGB888 pixel formats

  vc4:
   - convert to new bridge helpers

  vgem:
   - use shmem helpers

  virtio:
   - support mapping exported vram

  zte:
   - remove obsolete driver

  rockchip:
   - use bridge attach no connector for LVDS/RGB"

* tag 'drm-next-2021-11-03' of git://anongit.freedesktop.org/drm/drm: (1259 commits)
  drm/amdgpu/gmc6: fix DMA mask from 44 to 40 bits
  drm/amd/display: MST support for DPIA
  drm/amdgpu: Fix even more out of bound writes from debugfs
  drm/amdgpu/discovery: add SDMA IP instance info for soc15 parts
  drm/amdgpu/discovery: add UVD/VCN IP instance info for soc15 parts
  drm/amdgpu/UAPI: rearrange header to better align related items
  drm/amd/display: Enable dpia in dmub only for DCN31 B0
  drm/amd/display: Fix USB4 hot plug crash issue
  drm/amd/display: Fix deadlock when falling back to v2 from v3
  drm/amd/display: Fallback to clocks which meet requested voltage on DCN31
  drm/amd/display: move FPU associated DCN301 code to DML folder
  drm/amd/display: fix link training regression for 1 or 2 lane
  drm/amd/display: add two lane settings training options
  drm/amd/display: decouple hw_lane_settings from dpcd_lane_settings
  drm/amd/display: implement decide lane settings
  drm/amd/display: adopt DP2.0 LT SCR revision 8
  drm/amd/display: FEC configuration for dpia links in MST mode
  drm/amd/display: FEC configuration for dpia links
  drm/amd/display: Add workaround flag for EDID read on certain docks
  drm/amd/display: Set phy_mux_sel bit in dmub scratch register
  ...

1 files changed, 235 insertions, 0 deletions

diff --git a/drivers/gpu/drm/i915/intel_pcode.c b/drivers/gpu/drm/i915/intel_pcode.c
new file mode 100644
index 000000000000..e8c886e4e78d
--- /dev/null
+++ b/drivers/gpu/drm/i915/intel_pcode.c
@@ -0,0 +1,235 @@
+// SPDX-License-Identifier: MIT
+/*
+ * Copyright © 2013-2021 Intel Corporation
+ */
+
+#include "i915_drv.h"
+#include "intel_pcode.h"
+
+static int gen6_check_mailbox_status(u32 mbox)
+{
+	switch (mbox & GEN6_PCODE_ERROR_MASK) {
+	case GEN6_PCODE_SUCCESS:
+		return 0;
+	case GEN6_PCODE_UNIMPLEMENTED_CMD:
+		return -ENODEV;
+	case GEN6_PCODE_ILLEGAL_CMD:
+		return -ENXIO;
+	case GEN6_PCODE_MIN_FREQ_TABLE_GT_RATIO_OUT_OF_RANGE:
+	case GEN7_PCODE_MIN_FREQ_TABLE_GT_RATIO_OUT_OF_RANGE:
+		return -EOVERFLOW;
+	case GEN6_PCODE_TIMEOUT:
+		return -ETIMEDOUT;
+	default:
+		MISSING_CASE(mbox & GEN6_PCODE_ERROR_MASK);
+		return 0;
+	}
+}
+
+static int gen7_check_mailbox_status(u32 mbox)
+{
+	switch (mbox & GEN6_PCODE_ERROR_MASK) {
+	case GEN6_PCODE_SUCCESS:
+		return 0;
+	case GEN6_PCODE_ILLEGAL_CMD:
+		return -ENXIO;
+	case GEN7_PCODE_TIMEOUT:
+		return -ETIMEDOUT;
+	case GEN7_PCODE_ILLEGAL_DATA:
+		return -EINVAL;
+	case GEN11_PCODE_ILLEGAL_SUBCOMMAND:
+		return -ENXIO;
+	case GEN11_PCODE_LOCKED:
+		return -EBUSY;
+	case GEN11_PCODE_REJECTED:
+		return -EACCES;
+	case GEN7_PCODE_MIN_FREQ_TABLE_GT_RATIO_OUT_OF_RANGE:
+		return -EOVERFLOW;
+	default:
+		MISSING_CASE(mbox & GEN6_PCODE_ERROR_MASK);
+		return 0;
+	}
+}
+
+static int __sandybridge_pcode_rw(struct drm_i915_private *i915,
+				  u32 mbox, u32 *val, u32 *val1,
+				  int fast_timeout_us,
+				  int slow_timeout_ms,
+				  bool is_read)
+{
+	struct intel_uncore *uncore = &i915->uncore;
+
+	lockdep_assert_held(&i915->sb_lock);
+
+	/*
+	 * GEN6_PCODE_* are outside of the forcewake domain, we can use
+	 * intel_uncore_read/write_fw variants to reduce the amount of work
+	 * required when reading/writing.
+	 */
+
+	if (intel_uncore_read_fw(uncore, GEN6_PCODE_MAILBOX) & GEN6_PCODE_READY)
+		return -EAGAIN;
+
+	intel_uncore_write_fw(uncore, GEN6_PCODE_DATA, *val);
+	intel_uncore_write_fw(uncore, GEN6_PCODE_DATA1, val1 ? *val1 : 0);
+	intel_uncore_write_fw(uncore,
+			      GEN6_PCODE_MAILBOX, GEN6_PCODE_READY | mbox);
+
+	if (__intel_wait_for_register_fw(uncore,
+					 GEN6_PCODE_MAILBOX,
+					 GEN6_PCODE_READY, 0,
+					 fast_timeout_us,
+					 slow_timeout_ms,
+					 &mbox))
+		return -ETIMEDOUT;
+
+	if (is_read)
+		*val = intel_uncore_read_fw(uncore, GEN6_PCODE_DATA);
+	if (is_read && val1)
+		*val1 = intel_uncore_read_fw(uncore, GEN6_PCODE_DATA1);
+
+	if (GRAPHICS_VER(i915) > 6)
+		return gen7_check_mailbox_status(mbox);
+	else
+		return gen6_check_mailbox_status(mbox);
+}
+
+int sandybridge_pcode_read(struct drm_i915_private *i915, u32 mbox,
+			   u32 *val, u32 *val1)
+{
+	int err;
+
+	mutex_lock(&i915->sb_lock);
+	err = __sandybridge_pcode_rw(i915, mbox, val, val1,
+				     500, 20,
+				     true);
+	mutex_unlock(&i915->sb_lock);
+
+	if (err) {
+		drm_dbg(&i915->drm,
+			"warning: pcode (read from mbox %x) mailbox access failed for %ps: %d\n",
+			mbox, __builtin_return_address(0), err);
+	}
+
+	return err;
+}
+
+int sandybridge_pcode_write_timeout(struct drm_i915_private *i915,
+				    u32 mbox, u32 val,
+				    int fast_timeout_us,
+				    int slow_timeout_ms)
+{
+	int err;
+
+	mutex_lock(&i915->sb_lock);
+	err = __sandybridge_pcode_rw(i915, mbox, &val, NULL,
+				     fast_timeout_us, slow_timeout_ms,
+				     false);
+	mutex_unlock(&i915->sb_lock);
+
+	if (err) {
+		drm_dbg(&i915->drm,
+			"warning: pcode (write of 0x%08x to mbox %x) mailbox access failed for %ps: %d\n",
+			val, mbox, __builtin_return_address(0), err);
+	}
+
+	return err;
+}
+
+static bool skl_pcode_try_request(struct drm_i915_private *i915, u32 mbox,
+				  u32 request, u32 reply_mask, u32 reply,
+				  u32 *status)
+{
+	*status = __sandybridge_pcode_rw(i915, mbox, &request, NULL,
+					 500, 0,
+					 true);
+
+	return *status || ((request & reply_mask) == reply);
+}
+
+/**
+ * skl_pcode_request - send PCODE request until acknowledgment
+ * @i915: device private
+ * @mbox: PCODE mailbox ID the request is targeted for
+ * @request: request ID
+ * @reply_mask: mask used to check for request acknowledgment
+ * @reply: value used to check for request acknowledgment
+ * @timeout_base_ms: timeout for polling with preemption enabled
+ *
+ * Keep resending the @request to @mbox until PCODE acknowledges it, PCODE
+ * reports an error or an overall timeout of @timeout_base_ms+50 ms expires.
+ * The request is acknowledged once the PCODE reply dword equals @reply after
+ * applying @reply_mask. Polling is first attempted with preemption enabled
+ * for @timeout_base_ms and if this times out for another 50 ms with
+ * preemption disabled.
+ *
+ * Returns 0 on success, %-ETIMEDOUT in case of a timeout, <0 in case of some
+ * other error as reported by PCODE.
+ */
+int skl_pcode_request(struct drm_i915_private *i915, u32 mbox, u32 request,
+		      u32 reply_mask, u32 reply, int timeout_base_ms)
+{
+	u32 status;
+	int ret;
+
+	mutex_lock(&i915->sb_lock);
+
+#define COND \
+	skl_pcode_try_request(i915, mbox, request, reply_mask, reply, &status)
+
+	/*
+	 * Prime the PCODE by doing a request first. Normally it guarantees
+	 * that a subsequent request, at most @timeout_base_ms later, succeeds.
+	 * _wait_for() doesn't guarantee when its passed condition is evaluated
+	 * first, so send the first request explicitly.
+	 */
+	if (COND) {
+		ret = 0;
+		goto out;
+	}
+	ret = _wait_for(COND, timeout_base_ms * 1000, 10, 10);
+	if (!ret)
+		goto out;
+
+	/*
+	 * The above can time out if the number of requests was low (2 in the
+	 * worst case) _and_ PCODE was busy for some reason even after a
+	 * (queued) request and @timeout_base_ms delay. As a workaround retry
+	 * the poll with preemption disabled to maximize the number of
+	 * requests. Increase the timeout from @timeout_base_ms to 50ms to
+	 * account for interrupts that could reduce the number of these
+	 * requests, and for any quirks of the PCODE firmware that delays
+	 * the request completion.
+	 */
+	drm_dbg_kms(&i915->drm,
+		    "PCODE timeout, retrying with preemption disabled\n");
+	drm_WARN_ON_ONCE(&i915->drm, timeout_base_ms > 3);
+	preempt_disable();
+	ret = wait_for_atomic(COND, 50);
+	preempt_enable();
+
+out:
+	mutex_unlock(&i915->sb_lock);
+	return ret ? ret : status;
+#undef COND
+}
+
+int intel_pcode_init(struct drm_i915_private *i915)
+{
+	int ret = 0;
+
+	if (!IS_DGFX(i915))
+		return ret;
+
+	ret = skl_pcode_request(i915, DG1_PCODE_STATUS,
+				DG1_UNCORE_GET_INIT_STATUS,
+				DG1_UNCORE_INIT_STATUS_COMPLETE,
+				DG1_UNCORE_INIT_STATUS_COMPLETE, 180000);
+
+	drm_dbg(&i915->drm, "PCODE init status %d\n", ret);
+
+	if (ret)
+		drm_err(&i915->drm, "Pcode did not report uncore initialization completion!\n");
+
+	return ret;
+}