Merge tag 'drm-next-2021-08-31-1' of git://anongit.freedesktop.org/drm/drm

Pull drm updates from Dave Airlie:
 "Highlights:

   - i915 has seen a lot of refactoring and uAPI cleanups due to a
     change in the upstream direction going forward

     This has all been audited with known userspace, but there may be
     some pitfalls that were missed.

   - i915 now uses common TTM to enable discrete memory on DG1/2 GPUs

   - i915 enables Jasper and Elkhart Lake by default and has preliminary
     XeHP/DG2 support

   - amdgpu adds support for Cyan Skillfish

   - lots of implicit fencing rules documented and fixed up in drivers

   - msm now uses the core scheduler

   - the irq midlayer has been removed for non-legacy drivers

   - the sysfb code now works on more than x86.

  Otherwise the usual smattering of stuff everywhere, panels, bridges,
  refactorings.

  Detailed summary:

  core:
   - extract i915 eDP backlight into core
   - DP aux bus support
   - drm_device.irq_enabled removed
   - port drivers to native irq interfaces
   - export gem shadow plane handling for vgem
   - print proper driver name in framebuffer registration
   - driver fixes for implicit fencing rules
   - ARM fixed rate compression modifier added
   - updated fb damage handling
   - rmfb ioctl logging/docs
   - drop drm_gem_object_put_locked
   - define DRM_FORMAT_MAX_PLANES
   - add gem fb vmap/vunmap helpers
   - add lockdep_assert(once) helpers
   - mark drm irq midlayer as legacy
   - use offset adjusted bo mapping conversion

  vgaarb:
   - cleanups

  fbdev:
   - extend efifb handling to all arches
   - div by 0 fixes for multiple drivers

  udmabuf:
   - add hugepage mapping support

  dma-buf:
   - non-dynamic exporter fixups
   - document implicit fencing rules

  amdgpu:
   - Initial Cyan Skillfish support
   - switch virtual DCE over to vkms based atomic
   - VCN/JPEG power down fixes
   - NAVI PCIE link handling fixes
   - AMD HDMI freesync fixes
   - Yellow Carp + Beige Goby fixes
   - Clockgating/S0ix/SMU/EEPROM fixes
   - embed hw fence in job
   - rework dma-resv handling
   - ensure eviction to system ram

  amdkfd:
   - uapi: SVM address range query added
   - sysfs leak fix
   - GPUVM TLB optimizations
   - vmfault/migration counters

  i915:
   - Enable JSL and EHL by default
   - preliminary XeHP/DG2 support
   - remove all CNL support (never shipped)
   - move to TTM for discrete memory support
   - allow mixed object mmap handling
   - GEM uAPI spring cleaning
       - add I915_MMAP_OBJECT_FIXED
       - reinstate ADL-P mmap ioctls
       - drop a bunch of unused by userspace features
       - disable and remove GPU relocations
   - revert some i915 misfeatures
   - major refactoring of GuC for Gen11+
   - execbuffer object locking separate step
   - reject caching/set-domain on discrete
   - Enable pipe DMC loading on XE-LPD and ADL-P
   - add PSF GV point support
   - Refactor and fix DDI buffer translations
   - Clean up FBC CFB allocation code
   - Finish INTEL_GEN() and friends macro conversions

  nouveau:
   - add eDP backlight support
   - implicit fence fix

  msm:
   - a680/7c3 support
   - drm/scheduler conversion

  panfrost:
   - rework GPU reset

  virtio:
   - fix fencing for planes

  ast:
   - add detect support

  bochs:
   - move to tiny GPU driver

  vc4:
   - use hotplug irqs
   - HDMI codec support

  vmwgfx:
   - use internal vmware device headers

  ingenic:
   - demidlayering irq

  rcar-du:
   - shutdown fixes
   - convert to bridge connector helpers

  zynqmp-dsub:
   - misc fixes

  mgag200:
   - convert PLL handling to atomic

  mediatek:
   - MT8133 AAL support
   - gem mmap object support
   - MT8167 support

  etnaviv:
   - NXP Layerscape LS1028A SoC support
   - GEM mmap cleanups

  tegra:
   - new user API

  exynos:
   - missing unlock fix
   - build warning fix
   - use refcount_t"

* tag 'drm-next-2021-08-31-1' of git://anongit.freedesktop.org/drm/drm: (1318 commits)
  drm/amd/display: Move AllowDRAMSelfRefreshOrDRAMClockChangeInVblank to bounding box
  drm/amd/display: Remove duplicate dml init
  drm/amd/display: Update bounding box states (v2)
  drm/amd/display: Update number of DCN3 clock states
  drm/amdgpu: disable GFX CGCG in aldebaran
  drm/amdgpu: Clear RAS interrupt status on aldebaran
  drm/amdgpu: Add support for RAS XGMI err query
  drm/amdkfd: Account for SH/SE count when setting up cu masks.
  drm/amdgpu: rename amdgpu_bo_get_preferred_pin_domain
  drm/amdgpu: drop redundant cancel_delayed_work_sync call
  drm/amdgpu: add missing cleanups for more ASICs on UVD/VCE suspend
  drm/amdgpu: add missing cleanups for Polaris12 UVD/VCE on suspend
  drm/amdkfd: map SVM range with correct access permission
  drm/amdkfd: check access permisson to restore retry fault
  drm/amdgpu: Update RAS XGMI Error Query
  drm/amdgpu: Add driver infrastructure for MCA RAS
  drm/amd/display: Add Logging for HDMI color depth information
  drm/amd/amdgpu: consolidate PSP TA init shared buf functions
  drm/amd/amdgpu: add name field back to ras_common_if
  drm/amdgpu: Fix build with missing pm_suspend_target_state module export
  ...

1 files changed, 356 insertions, 2 deletions

diff --git a/drivers/gpu/drm/tegra/dc.c b/drivers/gpu/drm/tegra/dc.c
index 51bbbc42a144..16c7aabb94d3 100644
--- a/drivers/gpu/drm/tegra/dc.c
+++ b/drivers/gpu/drm/tegra/dc.c
@@ -8,6 +8,7 @@
 #include <linux/debugfs.h>
 #include <linux/delay.h>
 #include <linux/iommu.h>
+#include <linux/interconnect.h>
 #include <linux/module.h>
 #include <linux/of_device.h>
 #include <linux/pm_runtime.h>
@@ -618,9 +619,14 @@ static int tegra_plane_atomic_check(struct drm_plane *plane,
 	struct tegra_dc *dc = to_tegra_dc(new_plane_state->crtc);
 	int err;
 
+	plane_state->peak_memory_bandwidth = 0;
+	plane_state->avg_memory_bandwidth = 0;
+
 	/* no need for further checks if the plane is being disabled */
-	if (!new_plane_state->crtc)
+	if (!new_plane_state->crtc) {
+		plane_state->total_peak_memory_bandwidth = 0;
 		return 0;
+	}
 
 	err = tegra_plane_format(new_plane_state->fb->format->format,
 				 &plane_state->format,
@@ -808,6 +814,12 @@ static struct drm_plane *tegra_primary_plane_create(struct drm_device *drm,
 	formats = dc->soc->primary_formats;
 	modifiers = dc->soc->modifiers;
 
+	err = tegra_plane_interconnect_init(plane);
+	if (err) {
+		kfree(plane);
+		return ERR_PTR(err);
+	}
+
 	err = drm_universal_plane_init(drm, &plane->base, possible_crtcs,
 				       &tegra_plane_funcs, formats,
 				       num_formats, modifiers, type, NULL);
@@ -845,12 +857,18 @@ static int tegra_cursor_atomic_check(struct drm_plane *plane,
 {
 	struct drm_plane_state *new_plane_state = drm_atomic_get_new_plane_state(state,
 										 plane);
+	struct tegra_plane_state *plane_state = to_tegra_plane_state(new_plane_state);
 	struct tegra_plane *tegra = to_tegra_plane(plane);
 	int err;
 
+	plane_state->peak_memory_bandwidth = 0;
+	plane_state->avg_memory_bandwidth = 0;
+
 	/* no need for further checks if the plane is being disabled */
-	if (!new_plane_state->crtc)
+	if (!new_plane_state->crtc) {
+		plane_state->total_peak_memory_bandwidth = 0;
 		return 0;
+	}
 
 	/* scaling not supported for cursor */
 	if ((new_plane_state->src_w >> 16 != new_plane_state->crtc_w) ||
@@ -1030,6 +1048,12 @@ static struct drm_plane *tegra_dc_cursor_plane_create(struct drm_device *drm,
 	if (!dc->soc->has_nvdisplay) {
 		num_formats = ARRAY_SIZE(tegra_legacy_cursor_plane_formats);
 		formats = tegra_legacy_cursor_plane_formats;
+
+		err = tegra_plane_interconnect_init(plane);
+		if (err) {
+			kfree(plane);
+			return ERR_PTR(err);
+		}
 	} else {
 		num_formats = ARRAY_SIZE(tegra_cursor_plane_formats);
 		formats = tegra_cursor_plane_formats;
@@ -1149,6 +1173,12 @@ static struct drm_plane *tegra_dc_overlay_plane_create(struct drm_device *drm,
 	num_formats = dc->soc->num_overlay_formats;
 	formats = dc->soc->overlay_formats;
 
+	err = tegra_plane_interconnect_init(plane);
+	if (err) {
+		kfree(plane);
+		return ERR_PTR(err);
+	}
+
 	if (!cursor)
 		type = DRM_PLANE_TYPE_OVERLAY;
 	else
@@ -1572,6 +1602,11 @@ static int tegra_dc_show_stats(struct seq_file *s, void *data)
 	seq_printf(s, "underflow: %lu\n", dc->stats.underflow);
 	seq_printf(s, "overflow: %lu\n", dc->stats.overflow);
 
+	seq_printf(s, "frames total: %lu\n", dc->stats.frames_total);
+	seq_printf(s, "vblank total: %lu\n", dc->stats.vblank_total);
+	seq_printf(s, "underflow total: %lu\n", dc->stats.underflow_total);
+	seq_printf(s, "overflow total: %lu\n", dc->stats.overflow_total);
+
 	return 0;
 }
 
@@ -1804,6 +1839,106 @@ static int tegra_dc_wait_idle(struct tegra_dc *dc, unsigned long timeout)
 	return -ETIMEDOUT;
 }
 
+static void
+tegra_crtc_update_memory_bandwidth(struct drm_crtc *crtc,
+				   struct drm_atomic_state *state,
+				   bool prepare_bandwidth_transition)
+{
+	const struct tegra_plane_state *old_tegra_state, *new_tegra_state;
+	const struct tegra_dc_state *old_dc_state, *new_dc_state;
+	u32 i, new_avg_bw, old_avg_bw, new_peak_bw, old_peak_bw;
+	const struct drm_plane_state *old_plane_state;
+	const struct drm_crtc_state *old_crtc_state;
+	struct tegra_dc_window window, old_window;
+	struct tegra_dc *dc = to_tegra_dc(crtc);
+	struct tegra_plane *tegra;
+	struct drm_plane *plane;
+
+	if (dc->soc->has_nvdisplay)
+		return;
+
+	old_crtc_state = drm_atomic_get_old_crtc_state(state, crtc);
+	old_dc_state = to_const_dc_state(old_crtc_state);
+	new_dc_state = to_const_dc_state(crtc->state);
+
+	if (!crtc->state->active) {
+		if (!old_crtc_state->active)
+			return;
+
+		/*
+		 * When CRTC is disabled on DPMS, the state of attached planes
+		 * is kept unchanged. Hence we need to enforce removal of the
+		 * bandwidths from the ICC paths.
+		 */
+		drm_atomic_crtc_for_each_plane(plane, crtc) {
+			tegra = to_tegra_plane(plane);
+
+			icc_set_bw(tegra->icc_mem, 0, 0);
+			icc_set_bw(tegra->icc_mem_vfilter, 0, 0);
+		}
+
+		return;
+	}
+
+	for_each_old_plane_in_state(old_crtc_state->state, plane,
+				    old_plane_state, i) {
+		old_tegra_state = to_const_tegra_plane_state(old_plane_state);
+		new_tegra_state = to_const_tegra_plane_state(plane->state);
+		tegra = to_tegra_plane(plane);
+
+		/*
+		 * We're iterating over the global atomic state and it contains
+		 * planes from another CRTC, hence we need to filter out the
+		 * planes unrelated to this CRTC.
+		 */
+		if (tegra->dc != dc)
+			continue;
+
+		new_avg_bw = new_tegra_state->avg_memory_bandwidth;
+		old_avg_bw = old_tegra_state->avg_memory_bandwidth;
+
+		new_peak_bw = new_tegra_state->total_peak_memory_bandwidth;
+		old_peak_bw = old_tegra_state->total_peak_memory_bandwidth;
+
+		/*
+		 * See the comment related to !crtc->state->active above,
+		 * which explains why bandwidths need to be updated when
+		 * CRTC is turning ON.
+		 */
+		if (new_avg_bw == old_avg_bw && new_peak_bw == old_peak_bw &&
+		    old_crtc_state->active)
+			continue;
+
+		window.src.h = drm_rect_height(&plane->state->src) >> 16;
+		window.dst.h = drm_rect_height(&plane->state->dst);
+
+		old_window.src.h = drm_rect_height(&old_plane_state->src) >> 16;
+		old_window.dst.h = drm_rect_height(&old_plane_state->dst);
+
+		/*
+		 * During the preparation phase (atomic_begin), the memory
+		 * freq should go high before the DC changes are committed
+		 * if bandwidth requirement goes up, otherwise memory freq
+		 * should to stay high if BW requirement goes down.  The
+		 * opposite applies to the completion phase (post_commit).
+		 */
+		if (prepare_bandwidth_transition) {
+			new_avg_bw = max(old_avg_bw, new_avg_bw);
+			new_peak_bw = max(old_peak_bw, new_peak_bw);
+
+			if (tegra_plane_use_vertical_filtering(tegra, &old_window))
+				window = old_window;
+		}
+
+		icc_set_bw(tegra->icc_mem, new_avg_bw, new_peak_bw);
+
+		if (tegra_plane_use_vertical_filtering(tegra, &window))
+			icc_set_bw(tegra->icc_mem_vfilter, new_avg_bw, new_peak_bw);
+		else
+			icc_set_bw(tegra->icc_mem_vfilter, 0, 0);
+	}
+}
+
 static void tegra_crtc_atomic_disable(struct drm_crtc *crtc,
 				      struct drm_atomic_state *state)
 {
@@ -1985,6 +2120,8 @@ static void tegra_crtc_atomic_begin(struct drm_crtc *crtc,
 {
 	unsigned long flags;
 
+	tegra_crtc_update_memory_bandwidth(crtc, state, true);
+
 	if (crtc->state->event) {
 		spin_lock_irqsave(&crtc->dev->event_lock, flags);
 
@@ -2017,7 +2154,207 @@ static void tegra_crtc_atomic_flush(struct drm_crtc *crtc,
 	value = tegra_dc_readl(dc, DC_CMD_STATE_CONTROL);
 }
 
+static bool tegra_plane_is_cursor(const struct drm_plane_state *state)
+{
+	const struct tegra_dc_soc_info *soc = to_tegra_dc(state->crtc)->soc;
+	const struct drm_format_info *fmt = state->fb->format;
+	unsigned int src_w = drm_rect_width(&state->src) >> 16;
+	unsigned int dst_w = drm_rect_width(&state->dst);
+
+	if (state->plane->type != DRM_PLANE_TYPE_CURSOR)
+		return false;
+
+	if (soc->supports_cursor)
+		return true;
+
+	if (src_w != dst_w || fmt->num_planes != 1 || src_w * fmt->cpp[0] > 256)
+		return false;
+
+	return true;
+}
+
+static unsigned long
+tegra_plane_overlap_mask(struct drm_crtc_state *state,
+			 const struct drm_plane_state *plane_state)
+{
+	const struct drm_plane_state *other_state;
+	const struct tegra_plane *tegra;
+	unsigned long overlap_mask = 0;
+	struct drm_plane *plane;
+	struct drm_rect rect;
+
+	if (!plane_state->visible || !plane_state->fb)
+		return 0;
+
+	/*
+	 * Data-prefetch FIFO will easily help to overcome temporal memory
+	 * pressure if other plane overlaps with the cursor plane.
+	 */
+	if (tegra_plane_is_cursor(plane_state))
+		return 0;
+
+	drm_atomic_crtc_state_for_each_plane_state(plane, other_state, state) {
+		rect = plane_state->dst;
+
+		tegra = to_tegra_plane(other_state->plane);
+
+		if (!other_state->visible || !other_state->fb)
+			continue;
+
+		/*
+		 * Ignore cursor plane overlaps because it's not practical to
+		 * assume that it contributes to the bandwidth in overlapping
+		 * area if window width is small.
+		 */
+		if (tegra_plane_is_cursor(other_state))
+			continue;
+
+		if (drm_rect_intersect(&rect, &other_state->dst))
+			overlap_mask |= BIT(tegra->index);
+	}
+
+	return overlap_mask;
+}
+
+static int tegra_crtc_calculate_memory_bandwidth(struct drm_crtc *crtc,
+						 struct drm_atomic_state *state)
+{
+	ulong overlap_mask[TEGRA_DC_LEGACY_PLANES_NUM] = {}, mask;
+	u32 plane_peak_bw[TEGRA_DC_LEGACY_PLANES_NUM] = {};
+	bool all_planes_overlap_simultaneously = true;
+	const struct tegra_plane_state *tegra_state;
+	const struct drm_plane_state *plane_state;
+	struct tegra_dc *dc = to_tegra_dc(crtc);
+	const struct drm_crtc_state *old_state;
+	struct drm_crtc_state *new_state;
+	struct tegra_plane *tegra;
+	struct drm_plane *plane;
+
+	/*
+	 * The nv-display uses shared planes.  The algorithm below assumes
+	 * maximum 3 planes per-CRTC, this assumption isn't applicable to
+	 * the nv-display.  Note that T124 support has additional windows,
+	 * but currently they aren't supported by the driver.
+	 */
+	if (dc->soc->has_nvdisplay)
+		return 0;
+
+	new_state = drm_atomic_get_new_crtc_state(state, crtc);
+	old_state = drm_atomic_get_old_crtc_state(state, crtc);
+
+	/*
+	 * For overlapping planes pixel's data is fetched for each plane at
+	 * the same time, hence bandwidths are accumulated in this case.
+	 * This needs to be taken into account for calculating total bandwidth
+	 * consumed by all planes.
+	 *
+	 * Here we get the overlapping state of each plane, which is a
+	 * bitmask of plane indices telling with what planes there is an
+	 * overlap. Note that bitmask[plane] includes BIT(plane) in order
+	 * to make further code nicer and simpler.
+	 */
+	drm_atomic_crtc_state_for_each_plane_state(plane, plane_state, new_state) {
+		tegra_state = to_const_tegra_plane_state(plane_state);
+		tegra = to_tegra_plane(plane);
+
+		if (WARN_ON_ONCE(tegra->index >= TEGRA_DC_LEGACY_PLANES_NUM))
+			return -EINVAL;
+
+		plane_peak_bw[tegra->index] = tegra_state->peak_memory_bandwidth;
+		mask = tegra_plane_overlap_mask(new_state, plane_state);
+		overlap_mask[tegra->index] = mask;
+
+		if (hweight_long(mask) != 3)
+			all_planes_overlap_simultaneously = false;
+	}
+
+	/*
+	 * Then we calculate maximum bandwidth of each plane state.
+	 * The bandwidth includes the plane BW + BW of the "simultaneously"
+	 * overlapping planes, where "simultaneously" means areas where DC
+	 * fetches from the planes simultaneously during of scan-out process.
+	 *
+	 * For example, if plane A overlaps with planes B and C, but B and C
+	 * don't overlap, then the peak bandwidth will be either in area where
+	 * A-and-B or A-and-C planes overlap.
+	 *
+	 * The plane_peak_bw[] contains peak memory bandwidth values of
+	 * each plane, this information is needed by interconnect provider
+	 * in order to set up latency allowance based on the peak BW, see
+	 * tegra_crtc_update_memory_bandwidth().
+	 */
+	drm_atomic_crtc_state_for_each_plane_state(plane, plane_state, new_state) {
+		u32 i, old_peak_bw, new_peak_bw, overlap_bw = 0;
+
+		/*
+		 * Note that plane's atomic check doesn't touch the
+		 * total_peak_memory_bandwidth of enabled plane, hence the
+		 * current state contains the old bandwidth state from the
+		 * previous CRTC commit.
+		 */
+		tegra_state = to_const_tegra_plane_state(plane_state);
+		tegra = to_tegra_plane(plane);
+
+		for_each_set_bit(i, &overlap_mask[tegra->index], 3) {
+			if (i == tegra->index)
+				continue;
+
+			if (all_planes_overlap_simultaneously)
+				overlap_bw += plane_peak_bw[i];
+			else
+				overlap_bw = max(overlap_bw, plane_peak_bw[i]);
+		}
+
+		new_peak_bw = plane_peak_bw[tegra->index] + overlap_bw;
+		old_peak_bw = tegra_state->total_peak_memory_bandwidth;
+
+		/*
+		 * If plane's peak bandwidth changed (for example plane isn't
+		 * overlapped anymore) and plane isn't in the atomic state,
+		 * then add plane to the state in order to have the bandwidth
+		 * updated.
+		 */
+		if (old_peak_bw != new_peak_bw) {
+			struct tegra_plane_state *new_tegra_state;
+			struct drm_plane_state *new_plane_state;
+
+			new_plane_state = drm_atomic_get_plane_state(state, plane);
+			if (IS_ERR(new_plane_state))
+				return PTR_ERR(new_plane_state);
+
+			new_tegra_state = to_tegra_plane_state(new_plane_state);
+			new_tegra_state->total_peak_memory_bandwidth = new_peak_bw;
+		}
+	}
+
+	return 0;
+}
+
+static int tegra_crtc_atomic_check(struct drm_crtc *crtc,
+				   struct drm_atomic_state *state)
+{
+	int err;
+
+	err = tegra_crtc_calculate_memory_bandwidth(crtc, state);
+	if (err)
+		return err;
+
+	return 0;
+}
+
+void tegra_crtc_atomic_post_commit(struct drm_crtc *crtc,
+				   struct drm_atomic_state *state)
+{
+	/*
+	 * Display bandwidth is allowed to go down only once hardware state
+	 * is known to be armed, i.e. state was committed and VBLANK event
+	 * received.
+	 */
+	tegra_crtc_update_memory_bandwidth(crtc, state, false);
+}
+
 static const struct drm_crtc_helper_funcs tegra_crtc_helper_funcs = {
+	.atomic_check = tegra_crtc_atomic_check,
 	.atomic_begin = tegra_crtc_atomic_begin,
 	.atomic_flush = tegra_crtc_atomic_flush,
 	.atomic_enable = tegra_crtc_atomic_enable,
@@ -2036,6 +2373,7 @@ static irqreturn_t tegra_dc_irq(int irq, void *data)
 		/*
 		dev_dbg(dc->dev, "%s(): frame end\n", __func__);
 		*/
+		dc->stats.frames_total++;
 		dc->stats.frames++;
 	}
 
@@ -2044,6 +2382,7 @@ static irqreturn_t tegra_dc_irq(int irq, void *data)
 		dev_dbg(dc->dev, "%s(): vertical blank\n", __func__);
 		*/
 		drm_crtc_handle_vblank(&dc->base);
+		dc->stats.vblank_total++;
 		dc->stats.vblank++;
 	}
 
@@ -2051,6 +2390,7 @@ static irqreturn_t tegra_dc_irq(int irq, void *data)
 		/*
 		dev_dbg(dc->dev, "%s(): underflow\n", __func__);
 		*/
+		dc->stats.underflow_total++;
 		dc->stats.underflow++;
 	}
 
@@ -2058,11 +2398,13 @@ static irqreturn_t tegra_dc_irq(int irq, void *data)
 		/*
 		dev_dbg(dc->dev, "%s(): overflow\n", __func__);
 		*/
+		dc->stats.overflow_total++;
 		dc->stats.overflow++;
 	}
 
 	if (status & HEAD_UF_INT) {
 		dev_dbg_ratelimited(dc->dev, "%s(): head underflow\n", __func__);
+		dc->stats.underflow_total++;
 		dc->stats.underflow++;
 	}
 
@@ -2343,7 +2685,9 @@ static const struct tegra_dc_soc_info tegra20_dc_soc_info = {
 	.overlay_formats = tegra20_overlay_formats,
 	.modifiers = tegra20_modifiers,
 	.has_win_a_without_filters = true,
+	.has_win_b_vfilter_mem_client = true,
 	.has_win_c_without_vert_filter = true,
+	.plane_tiled_memory_bandwidth_x2 = false,
 };
 
 static const struct tegra_dc_soc_info tegra30_dc_soc_info = {
@@ -2363,7 +2707,9 @@ static const struct tegra_dc_soc_info tegra30_dc_soc_info = {
 	.overlay_formats = tegra20_overlay_formats,
 	.modifiers = tegra20_modifiers,
 	.has_win_a_without_filters = false,
+	.has_win_b_vfilter_mem_client = true,
 	.has_win_c_without_vert_filter = false,
+	.plane_tiled_memory_bandwidth_x2 = true,
 };
 
 static const struct tegra_dc_soc_info tegra114_dc_soc_info = {
@@ -2383,7 +2729,9 @@ static const struct tegra_dc_soc_info tegra114_dc_soc_info = {
 	.overlay_formats = tegra114_overlay_formats,
 	.modifiers = tegra20_modifiers,
 	.has_win_a_without_filters = false,
+	.has_win_b_vfilter_mem_client = false,
 	.has_win_c_without_vert_filter = false,
+	.plane_tiled_memory_bandwidth_x2 = true,
 };
 
 static const struct tegra_dc_soc_info tegra124_dc_soc_info = {
@@ -2403,7 +2751,9 @@ static const struct tegra_dc_soc_info tegra124_dc_soc_info = {
 	.overlay_formats = tegra124_overlay_formats,
 	.modifiers = tegra124_modifiers,
 	.has_win_a_without_filters = false,
+	.has_win_b_vfilter_mem_client = false,
 	.has_win_c_without_vert_filter = false,
+	.plane_tiled_memory_bandwidth_x2 = false,
 };
 
 static const struct tegra_dc_soc_info tegra210_dc_soc_info = {
@@ -2423,7 +2773,9 @@ static const struct tegra_dc_soc_info tegra210_dc_soc_info = {
 	.overlay_formats = tegra114_overlay_formats,
 	.modifiers = tegra124_modifiers,
 	.has_win_a_without_filters = false,
+	.has_win_b_vfilter_mem_client = false,
 	.has_win_c_without_vert_filter = false,
+	.plane_tiled_memory_bandwidth_x2 = false,
 };
 
 static const struct tegra_windowgroup_soc tegra186_dc_wgrps[] = {
@@ -2473,6 +2825,7 @@ static const struct tegra_dc_soc_info tegra186_dc_soc_info = {
 	.has_nvdisplay = true,
 	.wgrps = tegra186_dc_wgrps,
 	.num_wgrps = ARRAY_SIZE(tegra186_dc_wgrps),
+	.plane_tiled_memory_bandwidth_x2 = false,
 };
 
 static const struct tegra_windowgroup_soc tegra194_dc_wgrps[] = {
@@ -2522,6 +2875,7 @@ static const struct tegra_dc_soc_info tegra194_dc_soc_info = {
 	.has_nvdisplay = true,
 	.wgrps = tegra194_dc_wgrps,
 	.num_wgrps = ARRAY_SIZE(tegra194_dc_wgrps),
+	.plane_tiled_memory_bandwidth_x2 = false,
 };
 
 static const struct of_device_id tegra_dc_of_match[] = {