Merge tag 'drm-next-2025-10-01' of https://gitlab.freedesktop.org/drm/kernel

Pull drm updates from Dave Airlie:
 "cross-subsystem:
   - i2c-hid: Make elan touch controllers power on after panel is
     enabled
   - dt bindings for STM32MP25 SoC
   - pci vgaarb: use screen_info helpers
   - rust pin-init updates
   - add MEI driver for late binding firmware update/load

  uapi:
   - add ioctl for reassigning GEM handles
   - provide boot_display attribute on boot-up devices

  core:
   - document DRM_MODE_PAGE_FLIP_EVENT
   - add vendor specific recovery method to drm device wedged uevent

  gem:
   - Simplify gpuvm locking

  ttm:
   - add interface to populate buffers

  sched:
   - Fix race condition in trace code

  atomic:
   - Reallow no-op async page flips

  display:
   - dp: Fix command length

  video:
   - Improve pixel-format handling for struct screen_info

  rust:
   - drop Opaque<> from ioctl args
   - Alloc:
       - BorrowedPage type and AsPageIter traits
       - Implement Vmalloc::to_page() and VmallocPageIter
   - DMA/Scatterlist:
       - Add dma::DataDirection and type alias for dma_addr_t
       - Abstraction for struct scatterlist and sg_table
   - DRM:
       - simplify use of generics
       - add DriverFile type alias
       - drop Object::SIZE
   - Rust:
       - pin-init tree merge
       - Various methods for AsBytes and FromBytes traits

  gpuvm:
   - Support madvice in Xe driver

  gpusvm:
   - fix hmm_pfn_to_map_order usage in gpusvm

  bridge:
   - Improve and fix ref counting on bridge management
   - cdns-dsi: Various improvements to mode setting
   - Support Solomon SSD2825 plus DT bindings
   - Support Waveshare DSI2DPI plus DT bindings
   - Support Content Protection property
   - display-connector: Improve DP display detection
   - Add support for Radxa Ra620 plus DT bindings
   - adv7511: Provide SPD and HDMI infoframes
   - it6505: Replace crypto_shash with sha()
   - synopsys: Add support for DW DPTX Controller plus DT bindings
   - adv7511: Write full Audio infoframe
   - ite6263: Support vendor-specific infoframes
   - simple: Add support for Realtek RTD2171 DP-to-HDMI plus DT bindings

  panel:
   - panel-edp: Support mt8189 Chromebooks; Support BOE NV140WUM-N64;
     Support SHP LQ134Z1; Fixes
   - panel-simple: Support Olimex LCD-OLinuXino-5CTS plus DT bindings
   - Support Samsung AMS561RA01
   - Support Hydis HV101HD1 plus DT bindings
   - ilitek-ili9881c: Refactor mode setting; Add support for Bestar
     BSD1218-A101KL68 LCD plus DT bindings
   - lvds: Add support for Ampire AMP19201200B5TZQW-T03 to DT bindings
   - edp: Add support for additonal mt8189 Chromebook panels
   - lvds: Add DT bindings for EDT ETML0700Z8DHA

  amdgpu:
   - add CRIU support for gem objects
   - RAS updates
   - VCN SRAM load fixes
   - EDID read fixes
   - eDP ALPM support
   - Documentation updates
   - Rework PTE flag generation
   - DCE6 fixes
   - VCN devcoredump cleanup
   - MMHUB client id fixes
   - VCN 5.0.1 RAS support
   - SMU 13.0.x updates
   - Expanded PCIe DPC support
   - Expanded VCN reset support
   - VPE per queue reset support
   - give kernel jobs unique id for tracing
   - pre-populate exported buffers
   - cyan skillfish updates
   - make vbios build number available in sysfs
   - userq updates
   - HDCP updates
   - support MMIO remap page as ttm pool
   - JPEG parser updates
   - DCE6 DC updates
   - use devm for i2c buses
   - GPUVM locking updates
   - Drop non-DC DCE11 code
   - improve fallback handling for pixel encoding

  amdkfd:
   - SVM/page migration fixes
   - debugfs fixes
   - add CRIO support for gem objects
   - SVM updates

  radeon:
   - use dev_warn_once in CS parsers

  xe:
   - add madvise interface
   - add DRM_IOCTL_XE_VM_QUERY_MEMORY_RANGE_ATTRS to query VMA count
     and memory attributes
   - drop L# bank mask reporting from media GT3 on Xe3+.
   - add SLPC power_profile sysfs interface
   - add configs attribs to add post/mid context-switch commands
   - handle firmware reported hardware errors notifying userspace with
     device wedged uevent
   - use same dir structure across sysfs/debugfs
   - cleanup and future proof vram region init
   - add G-states and PCI link states to debugfs
   - Add SRIOV support for CCS surfaces on Xe2+
   - Enable SRIOV PF mode by default on supported platforms
   - move flush to common code
   - extended core workarounds for Xe2/3
   - use DRM scheduler for delayed GT TLB invalidations
   - configs improvements and allow VF device enablement
   - prep work to expose mmio regions to userspace
   - VF migration support added
   - prepare GPU SVM for THP migration
   - start fixing XE_PAGE_SIZE vs PAGE_SIZE
   - add PSMI support for hw validation
   - resize VF bars to max possible size according to number of VFs
   - Ensure GT is in C0 during resume
   - pre-populate exported buffers
   - replace xe_hmm with gpusvm
   - add more SVM GT stats to debugfs
   - improve fake pci and WA kunnit handle for new platform testing
   - Test GuC to GuC comms to add debugging
   - use attribute groups to simplify sysfs registration
   - add Late Binding firmware code to interact with MEI

  i915:
   - apply multiple JSL/EHL/Gen7/Gen6 workarounds properly
   - protect against overflow in active_engine()
   - Use try_cmpxchg64() in __active_lookup()
   - include GuC registers in error state
   - get rid of dev->struct_mutex
   - iopoll: generalize read_poll_timout
   - lots more display refactoring
   - Reject HBR3 in any eDP Panel
   - Prune modes for YUV420
   - Display Wa fix, additions, and updates
   - DP: Fix 2.7 Gbps link training on g4x
   - DP: Adjust the idle pattern handling
   - DP: Shuffle the link training code a bit
   - Don't set/read the DSI C clock divider on GLK
   - Enable_psr kernel parameter changes
   - Type-C enabled/disconnected dp-alt sink
   - Wildcat Lake enabling
   - DP HDR updates
   - DRAM detection
   - wait PSR idle on dsb commit
   - Remove FBC modulo 4 restriction for ADL-P+
   - panic: refactor framebuffer allocation

  habanalabs:
   - debug/visibility improvements
   - vmalloc-backed coherent mmap support
   - HLDIO infrastructure

  nova-core:
   - various register!() macro improvements
   - minor vbios/firmware fixes/refactoring
   - advance firmware boot stages; process Booter and patch signatures
   - process GSP and GSP bootloader
   - Add r570.144 firmware bindings and update to it
   - Move GSP boot code to own module
   - Use new pin-init features to store driver's private data in a
     single allocation
   - Update ARef import from sync::aref

  nova-drm:
   - Update ARef import from sync::aref

  tyr:
   - initial driver skeleton for a rust driver for ARM Mali GPUs
   - capable of powering up, query metadata and provide it to userspace.

  msm:
   - GPU and Core:
      - in DT bindings describe clocks per GPU type
      - GMU bandwidth voting for x1-85
      - a623/a663 speedbins
      - cleanup some remaining no-iommu leftovers after VM_BIND conversion
      - fix GEM obj 32b size truncation
      - add missing VM_BIND param validation
      - IFPC for x1-85 and a750
      - register xml and gen_header.py sync from mesa
   - Display:
      - add missing bindings for display on SC8180X
      - added DisplayPort MST bindings
      - conversion from round_rate() to determine_rate()

  amdxdna:
   - add IOCTL_AMDXDNA_GET_ARRAY
   - support user space allocated buffers
   - streamline PM interfaces
   - Refactoring wrt. hardware contexts
   - improve error reporting

  nouveau:
   - use GSP firmware by default
   - improve error reporting
   - Pre-populate exported buffers

  ast:
   - Clean up detection of DRAM config

  exynos:
   - add DSIM bridge driver support for Exynos7870
   - Document Exynos7870 DSIM compatible in dt-binding

  panthor:
   - Print task/pid on errors
   - Add support for Mali G710, G510, G310, Gx15, Gx20, Gx25
   - Improve cache flushing
   - Fail VM bind if BO has offset

  renesas:
   - convert to RUNTIME_PM_OPS

  rcar-du:
   - Make number of lanes configurable
   - Use RUNTIME_PM_OPS
   - Add support for DSI commands

  rocket:
   - Add driver for Rockchip NPU plus DT bindings
   - Use kfree() and sizeof() correctly
   - Test DMA status

  rockchip:
   - dsi2: Add support for RK3576 plus DT bindings
   - Add support for RK3588 DPTX output

  tidss:
   - Use crtc_ fields for programming display mode
   - Remove other drivers from aperture

  pixpaper:
   - Add support for Mayqueen Pixpaper plus DT bindings

  v3d:
   - Support querying nubmer of GPU resets for KHR_robustness

  stm:
   - Clean up logging
   - ltdc: Add support support for STM32MP257F-EV1 plus DT bindings

  sitronix:
   - st7571-i2c: Add support for inverted displays and 2-bit grayscale

  tidss:
   - Convert to kernel's FIELD_ macros

  vesadrm:
   - Support 8-bit palette mode

  imagination:
   - Improve power management
   - Add support for TH1520 GPU
   - Support Risc-V architectures

  v3d:
   - Improve job management and locking

  vkms:
   - Support variants of ARGB8888, ARGB16161616, RGB565, RGB888 and P01x
   - Spport YUV with 16-bit components"

* tag 'drm-next-2025-10-01' of https://gitlab.freedesktop.org/drm/kernel: (1455 commits)
  drm/amd: Add name to modes from amdgpu_connector_add_common_modes()
  drm/amd: Drop some common modes from amdgpu_connector_add_common_modes()
  drm/amdgpu: update MODULE_PARM_DESC for freesync_video
  drm/amd: Use dynamic array size declaration for amdgpu_connector_add_common_modes()
  drm/amd/display: Share dce100_validate_global with DCE6-8
  drm/amd/display: Share dce100_validate_bandwidth with DCE6-8
  drm/amdgpu: Fix fence signaling race condition in userqueue
  amd/amdkfd: enhance kfd process check in switch partition
  amd/amdkfd: resolve a race in amdgpu_amdkfd_device_fini_sw
  drm/amd/display: Reject modes with too high pixel clock on DCE6-10
  drm/amd: Drop unnecessary check in amdgpu_connector_add_common_modes()
  drm/amd/display: Only enable common modes for eDP and LVDS
  drm/amdgpu: remove the redeclaration of variable i
  drm/amdgpu/userq: assign an error code for invalid userq va
  drm/amdgpu: revert "rework reserved VMID handling" v2
  drm/amdgpu: remove leftover from enforcing isolation by VMID
  drm/amdgpu: Add fallback to pipe reset if KCQ ring reset fails
  accel/habanalabs: add Infineon version check
  accel/habanalabs/gaudi2: read preboot status after recovering from dirty state
  accel/habanalabs: add HL_GET_P_STATE passthrough type
  ...

1 files changed, 68 insertions, 138 deletions

diff --git a/drivers/gpu/nova-core/gpu.rs b/drivers/gpu/nova-core/gpu.rs
index 600cc90b5fab..af20e2daea24 100644
--- a/drivers/gpu/nova-core/gpu.rs
+++ b/drivers/gpu/nova-core/gpu.rs
@@ -3,15 +3,11 @@
 use kernel::{device, devres::Devres, error::code::*, fmt, pci, prelude::*, sync::Arc};
 
 use crate::driver::Bar0;
-use crate::falcon::{gsp::Gsp, sec2::Sec2, Falcon};
-use crate::fb::FbLayout;
+use crate::falcon::{gsp::Gsp as GspFalcon, sec2::Sec2 as Sec2Falcon, Falcon};
 use crate::fb::SysmemFlush;
-use crate::firmware::fwsec::{FwsecCommand, FwsecFirmware};
-use crate::firmware::{Firmware, FIRMWARE_VERSION};
 use crate::gfw;
+use crate::gsp::Gsp;
 use crate::regs;
-use crate::util;
-use crate::vbios::Vbios;
 
 macro_rules! define_chipset {
     ({ $($variant:ident = $value:expr),* $(,)* }) =>
@@ -27,13 +23,23 @@ macro_rules! define_chipset {
                 $( Chipset::$variant, )*
             ];
 
-            pub(crate) const NAMES: [&'static str; Self::ALL.len()] = [
-                $( util::const_bytes_to_str(
-                        util::to_lowercase_bytes::<{ stringify!($variant).len() }>(
-                            stringify!($variant)
-                        ).as_slice()
-                ), )*
-            ];
+            ::kernel::macros::paste!(
+            /// Returns the name of this chipset, in lowercase.
+            ///
+            /// # Examples
+            ///
+            /// ```
+            /// let chipset = Chipset::GA102;
+            /// assert_eq!(chipset.name(), "ga102");
+            /// ```
+            pub(crate) const fn name(&self) -> &'static str {
+                match *self {
+                $(
+                    Chipset::$variant => stringify!([<$variant:lower>]),
+                )*
+                }
+            }
+            );
         }
 
         // TODO[FPRI]: replace with something like derive(FromPrimitive)
@@ -162,150 +168,74 @@ impl Spec {
 }
 
 /// Structure holding the resources required to operate the GPU.
-#[pin_data(PinnedDrop)]
+#[pin_data]
 pub(crate) struct Gpu {
     spec: Spec,
     /// MMIO mapping of PCI BAR 0
     bar: Arc<Devres<Bar0>>,
-    fw: Firmware,
     /// System memory page required for flushing all pending GPU-side memory writes done through
     /// PCIE into system memory, via sysmembar (A GPU-initiated HW memory-barrier operation).
     sysmem_flush: SysmemFlush,
-}
-
-#[pinned_drop]
-impl PinnedDrop for Gpu {
-    fn drop(self: Pin<&mut Self>) {
-        // Unregister the sysmem flush page before we release it.
-        self.bar
-            .try_access_with(|b| self.sysmem_flush.unregister(b));
-    }
+    /// GSP falcon instance, used for GSP boot up and cleanup.
+    gsp_falcon: Falcon<GspFalcon>,
+    /// SEC2 falcon instance, used for GSP boot up and cleanup.
+    sec2_falcon: Falcon<Sec2Falcon>,
+    /// GSP runtime data. Temporarily an empty placeholder.
+    #[pin]
+    gsp: Gsp,
 }
 
 impl Gpu {
-    /// Helper function to load and run the FWSEC-FRTS firmware and confirm that it has properly
-    /// created the WPR2 region.
-    ///
-    /// TODO: this needs to be moved into a larger type responsible for booting the whole GSP
-    /// (`GspBooter`?).
-    fn run_fwsec_frts(
-        dev: &device::Device<device::Bound>,
-        falcon: &Falcon<Gsp>,
-        bar: &Bar0,
-        bios: &Vbios,
-        fb_layout: &FbLayout,
-    ) -> Result<()> {
-        // Check that the WPR2 region does not already exists - if it does, we cannot run
-        // FWSEC-FRTS until the GPU is reset.
-        if regs::NV_PFB_PRI_MMU_WPR2_ADDR_HI::read(bar).higher_bound() != 0 {
-            dev_err!(
-                dev,
-                "WPR2 region already exists - GPU needs to be reset to proceed\n"
-            );
-            return Err(EBUSY);
-        }
+    pub(crate) fn new<'a>(
+        pdev: &'a pci::Device<device::Bound>,
+        devres_bar: Arc<Devres<Bar0>>,
+        bar: &'a Bar0,
+    ) -> impl PinInit<Self, Error> + 'a {
+        try_pin_init!(Self {
+            spec: Spec::new(bar).inspect(|spec| {
+                dev_info!(
+                    pdev.as_ref(),
+                    "NVIDIA (Chipset: {}, Architecture: {:?}, Revision: {})\n",
+                    spec.chipset,
+                    spec.chipset.arch(),
+                    spec.revision
+                );
+            })?,
 
-        let fwsec_frts = FwsecFirmware::new(
-            dev,
-            falcon,
-            bar,
-            bios,
-            FwsecCommand::Frts {
-                frts_addr: fb_layout.frts.start,
-                frts_size: fb_layout.frts.end - fb_layout.frts.start,
+            // We must wait for GFW_BOOT completion before doing any significant setup on the GPU.
+            _: {
+                gfw::wait_gfw_boot_completion(bar)
+                    .inspect_err(|_| dev_err!(pdev.as_ref(), "GFW boot did not complete"))?;
             },
-        )?;
 
-        // Run FWSEC-FRTS to create the WPR2 region.
-        fwsec_frts.run(dev, falcon, bar)?;
+            sysmem_flush: SysmemFlush::register(pdev.as_ref(), bar, spec.chipset)?,
 
-        // SCRATCH_E contains the error code for FWSEC-FRTS.
-        let frts_status = regs::NV_PBUS_SW_SCRATCH_0E::read(bar).frts_err_code();
-        if frts_status != 0 {
-            dev_err!(
-                dev,
-                "FWSEC-FRTS returned with error code {:#x}",
-                frts_status
-            );
+            gsp_falcon: Falcon::new(
+                pdev.as_ref(),
+                spec.chipset,
+                bar,
+                spec.chipset > Chipset::GA100,
+            )
+            .inspect(|falcon| falcon.clear_swgen0_intr(bar))?,
 
-            return Err(EIO);
-        }
+            sec2_falcon: Falcon::new(pdev.as_ref(), spec.chipset, bar, true)?,
 
-        // Check that the WPR2 region has been created as we requested.
-        let (wpr2_lo, wpr2_hi) = (
-            regs::NV_PFB_PRI_MMU_WPR2_ADDR_LO::read(bar).lower_bound(),
-            regs::NV_PFB_PRI_MMU_WPR2_ADDR_HI::read(bar).higher_bound(),
-        );
+            gsp <- Gsp::new(),
 
-        match (wpr2_lo, wpr2_hi) {
-            (_, 0) => {
-                dev_err!(dev, "WPR2 region not created after running FWSEC-FRTS\n");
+            _: { gsp.boot(pdev, bar, spec.chipset, gsp_falcon, sec2_falcon)? },
 
-                Err(EIO)
-            }
-            (wpr2_lo, _) if wpr2_lo != fb_layout.frts.start => {
-                dev_err!(
-                    dev,
-                    "WPR2 region created at unexpected address {:#x}; expected {:#x}\n",
-                    wpr2_lo,
-                    fb_layout.frts.start,
-                );
-
-                Err(EIO)
-            }
-            (wpr2_lo, wpr2_hi) => {
-                dev_dbg!(dev, "WPR2: {:#x}-{:#x}\n", wpr2_lo, wpr2_hi);
-                dev_dbg!(dev, "GPU instance built\n");
-
-                Ok(())
-            }
-        }
+            bar: devres_bar,
+        })
     }
 
-    pub(crate) fn new(
-        pdev: &pci::Device<device::Bound>,
-        devres_bar: Arc<Devres<Bar0>>,
-    ) -> Result<impl PinInit<Self>> {
-        let bar = devres_bar.access(pdev.as_ref())?;
-        let spec = Spec::new(bar)?;
-        let fw = Firmware::new(pdev.as_ref(), spec.chipset, FIRMWARE_VERSION)?;
-
-        dev_info!(
-            pdev.as_ref(),
-            "NVIDIA (Chipset: {}, Architecture: {:?}, Revision: {})\n",
-            spec.chipset,
-            spec.chipset.arch(),
-            spec.revision
-        );
-
-        // We must wait for GFW_BOOT completion before doing any significant setup on the GPU.
-        gfw::wait_gfw_boot_completion(bar)
-            .inspect_err(|_| dev_err!(pdev.as_ref(), "GFW boot did not complete"))?;
-
-        let sysmem_flush = SysmemFlush::register(pdev.as_ref(), bar, spec.chipset)?;
-
-        let gsp_falcon = Falcon::<Gsp>::new(
-            pdev.as_ref(),
-            spec.chipset,
-            bar,
-            spec.chipset > Chipset::GA100,
-        )?;
-        gsp_falcon.clear_swgen0_intr(bar);
-
-        let _sec2_falcon = Falcon::<Sec2>::new(pdev.as_ref(), spec.chipset, bar, true)?;
-
-        let fb_layout = FbLayout::new(spec.chipset, bar)?;
-        dev_dbg!(pdev.as_ref(), "{:#x?}\n", fb_layout);
-
-        let bios = Vbios::new(pdev, bar)?;
-
-        Self::run_fwsec_frts(pdev.as_ref(), &gsp_falcon, bar, &bios, &fb_layout)?;
-
-        Ok(pin_init!(Self {
-            spec,
-            bar: devres_bar,
-            fw,
-            sysmem_flush,
-        }))
+    /// Called when the corresponding [`Device`](device::Device) is unbound.
+    ///
+    /// Note: This method must only be called from `Driver::unbind`.
+    pub(crate) fn unbind(&self, dev: &device::Device<device::Core>) {
+        kernel::warn_on!(self
+            .bar
+            .access(dev)
+            .inspect(|bar| self.sysmem_flush.unregister(bar))
+            .is_err());
     }
 }