Merge branch '5.15-2.2.x-imx' into toradex_5.15-2.2.x-imxtoradex_5.15-2.2.x-imx

Conflicts:
	drivers/tty/serial/fsl_lpuart.c

Signed-off-by: Hiago De Franco <hiago.franco@toradex.com>

7 files changed, 72 insertions, 22 deletions

diff --git a/drivers/i2c/busses/i2c-ali1535.c b/drivers/i2c/busses/i2c-ali1535.c
index ee83c4581bce..cd2c8afebe79 100644
--- a/drivers/i2c/busses/i2c-ali1535.c
+++ b/drivers/i2c/busses/i2c-ali1535.c
@@ -490,6 +490,8 @@ MODULE_DEVICE_TABLE(pci, ali1535_ids);
 
 static int ali1535_probe(struct pci_dev *dev, const struct pci_device_id *id)
 {
+	int ret;
+
 	if (ali1535_setup(dev)) {
 		dev_warn(&dev->dev,
 			"ALI1535 not detected, module not inserted.\n");
@@ -501,7 +503,15 @@ static int ali1535_probe(struct pci_dev *dev, const struct pci_device_id *id)
 
 	snprintf(ali1535_adapter.name, sizeof(ali1535_adapter.name),
 		"SMBus ALI1535 adapter at %04x", ali1535_offset);
-	return i2c_add_adapter(&ali1535_adapter);
+	ret = i2c_add_adapter(&ali1535_adapter);
+	if (ret)
+		goto release_region;
+
+	return 0;
+
+release_region:
+	release_region(ali1535_smba, ALI1535_SMB_IOSIZE);
+	return ret;
 }
 
 static void ali1535_remove(struct pci_dev *dev)
diff --git a/drivers/i2c/busses/i2c-ali15x3.c b/drivers/i2c/busses/i2c-ali15x3.c
index cc58feacd082..28a57cb6efb9 100644
--- a/drivers/i2c/busses/i2c-ali15x3.c
+++ b/drivers/i2c/busses/i2c-ali15x3.c
@@ -473,6 +473,8 @@ MODULE_DEVICE_TABLE (pci, ali15x3_ids);
 
 static int ali15x3_probe(struct pci_dev *dev, const struct pci_device_id *id)
 {
+	int ret;
+
 	if (ali15x3_setup(dev)) {
 		dev_err(&dev->dev,
 			"ALI15X3 not detected, module not inserted.\n");
@@ -484,7 +486,15 @@ static int ali15x3_probe(struct pci_dev *dev, const struct pci_device_id *id)
 
 	snprintf(ali15x3_adapter.name, sizeof(ali15x3_adapter.name),
 		"SMBus ALI15X3 adapter at %04x", ali15x3_smba);
-	return i2c_add_adapter(&ali15x3_adapter);
+	ret = i2c_add_adapter(&ali15x3_adapter);
+	if (ret)
+		goto release_region;
+
+	return 0;
+
+release_region:
+	release_region(ali15x3_smba, ALI15X3_SMB_IOSIZE);
+	return ret;
 }
 
 static void ali15x3_remove(struct pci_dev *dev)
diff --git a/drivers/i2c/busses/i2c-cros-ec-tunnel.c b/drivers/i2c/busses/i2c-cros-ec-tunnel.c
index 790ea3fda693..69607ae7cdab 100644
--- a/drivers/i2c/busses/i2c-cros-ec-tunnel.c
+++ b/drivers/i2c/busses/i2c-cros-ec-tunnel.c
@@ -247,6 +247,9 @@ static int ec_i2c_probe(struct platform_device *pdev)
 	u32 remote_bus;
 	int err;
 
+	if (!ec)
+		return dev_err_probe(dev, -EPROBE_DEFER, "couldn't find parent EC device\n");
+
 	if (!ec->cmd_xfer) {
 		dev_err(dev, "Missing sendrecv\n");
 		return -EINVAL;
diff --git a/drivers/i2c/busses/i2c-npcm7xx.c b/drivers/i2c/busses/i2c-npcm7xx.c
index 73c808ef1bfe..d97694ac29ca 100644
--- a/drivers/i2c/busses/i2c-npcm7xx.c
+++ b/drivers/i2c/busses/i2c-npcm7xx.c
@@ -2305,6 +2305,13 @@ static int npcm_i2c_probe_bus(struct platform_device *pdev)
 	if (irq < 0)
 		return irq;
 
+	/*
+	 * Disable the interrupt to avoid the interrupt handler being triggered
+	 * incorrectly by the asynchronous interrupt status since the machine
+	 * might do a warm reset during the last smbus/i2c transfer session.
+	 */
+	npcm_i2c_int_enable(bus, false);
+
 	ret = devm_request_irq(bus->dev, irq, npcm_i2c_bus_irq, 0,
 			       dev_name(bus->dev), bus);
 	if (ret)
diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index 8955f62b497e..5c045c4da660 100644
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -1049,23 +1049,6 @@ static int omap_i2c_transmit_data(struct omap_i2c_dev *omap, u8 num_bytes,
 	return 0;
 }
 
-static irqreturn_t
-omap_i2c_isr(int irq, void *dev_id)
-{
-	struct omap_i2c_dev *omap = dev_id;
-	irqreturn_t ret = IRQ_HANDLED;
-	u16 mask;
-	u16 stat;
-
-	stat = omap_i2c_read_reg(omap, OMAP_I2C_STAT_REG);
-	mask = omap_i2c_read_reg(omap, OMAP_I2C_IE_REG) & ~OMAP_I2C_STAT_NACK;
-
-	if (stat & mask)
-		ret = IRQ_WAKE_THREAD;
-
-	return ret;
-}
-
 static int omap_i2c_xfer_data(struct omap_i2c_dev *omap)
 {
 	u16 bits;
@@ -1096,8 +1079,13 @@ static int omap_i2c_xfer_data(struct omap_i2c_dev *omap)
 		}
 
 		if (stat & OMAP_I2C_STAT_NACK) {
-			err |= OMAP_I2C_STAT_NACK;
+			omap->cmd_err |= OMAP_I2C_STAT_NACK;
 			omap_i2c_ack_stat(omap, OMAP_I2C_STAT_NACK);
+
+			if (!(stat & ~OMAP_I2C_STAT_NACK)) {
+				err = -EAGAIN;
+				break;
+			}
 		}
 
 		if (stat & OMAP_I2C_STAT_AL) {
@@ -1475,7 +1463,7 @@ omap_i2c_probe(struct platform_device *pdev)
 				IRQF_NO_SUSPEND, pdev->name, omap);
 	else
 		r = devm_request_threaded_irq(&pdev->dev, omap->irq,
-				omap_i2c_isr, omap_i2c_isr_thread,
+				NULL, omap_i2c_isr_thread,
 				IRQF_NO_SUSPEND | IRQF_ONESHOT,
 				pdev->name, omap);
 
diff --git a/drivers/i2c/busses/i2c-sis630.c b/drivers/i2c/busses/i2c-sis630.c
index cfb8e04a2a83..6befa6ff83f2 100644
--- a/drivers/i2c/busses/i2c-sis630.c
+++ b/drivers/i2c/busses/i2c-sis630.c
@@ -509,6 +509,8 @@ MODULE_DEVICE_TABLE(pci, sis630_ids);
 
 static int sis630_probe(struct pci_dev *dev, const struct pci_device_id *id)
 {
+	int ret;
+
 	if (sis630_setup(dev)) {
 		dev_err(&dev->dev,
 			"SIS630 compatible bus not detected, "
@@ -522,7 +524,15 @@ static int sis630_probe(struct pci_dev *dev, const struct pci_device_id *id)
 	snprintf(sis630_adapter.name, sizeof(sis630_adapter.name),
 		 "SMBus SIS630 adapter at %04x", smbus_base + SMB_STS);
 
-	return i2c_add_adapter(&sis630_adapter);
+	ret = i2c_add_adapter(&sis630_adapter);
+	if (ret)
+		goto release_region;
+
+	return 0;
+
+release_region:
+	release_region(smbus_base + SMB_STS, SIS630_SMB_IOREGION);
+	return ret;
 }
 
 static void sis630_remove(struct pci_dev *dev)
diff --git a/drivers/i2c/i2c-core-acpi.c b/drivers/i2c/i2c-core-acpi.c
index 6ce05441178a..8b06f5d4a4c3 100644
--- a/drivers/i2c/i2c-core-acpi.c
+++ b/drivers/i2c/i2c-core-acpi.c
@@ -327,6 +327,25 @@ static const struct acpi_device_id i2c_acpi_force_400khz_device_ids[] = {
 	{}
 };
 
+static const struct acpi_device_id i2c_acpi_force_100khz_device_ids[] = {
+	/*
+	 * When a 400KHz freq is used on this model of ELAN touchpad in Linux,
+	 * excessive smoothing (similar to when the touchpad's firmware detects
+	 * a noisy signal) is sometimes applied. As some devices' (e.g, Lenovo
+	 * V15 G4) ACPI tables specify a 400KHz frequency for this device and
+	 * some I2C busses (e.g, Designware I2C) default to a 400KHz freq,
+	 * force the speed to 100KHz as a workaround.
+	 *
+	 * For future investigation: This problem may be related to the default
+	 * HCNT/LCNT values given by some busses' drivers, because they are not
+	 * specified in the aforementioned devices' ACPI tables, and because
+	 * the device works without issues on Windows at what is expected to be
+	 * a 400KHz frequency. The root cause of the issue is not known.
+	 */
+	{ "ELAN06FA", 0 },
+	{}
+};
+
 static acpi_status i2c_acpi_lookup_speed(acpi_handle handle, u32 level,
 					   void *data, void **return_value)
 {
@@ -348,6 +367,9 @@ static acpi_status i2c_acpi_lookup_speed(acpi_handle handle, u32 level,
 	if (acpi_match_device_ids(adev, i2c_acpi_force_400khz_device_ids) == 0)
 		lookup->force_speed = I2C_MAX_FAST_MODE_FREQ;
 
+	if (acpi_match_device_ids(adev, i2c_acpi_force_100khz_device_ids) == 0)
+		lookup->force_speed = I2C_MAX_STANDARD_MODE_FREQ;
+
 	return AE_OK;
 }