Merge tag 'omap-for-v4.1/wl12xx-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt

Merge "wireless wl12xx and omap device tree changes for v4.1" from Tony
Lindgren:

Wireless and omap changes to make wl12xx driver to use device tree
data instead of platform data from Eliad Peller <eliad@wizery.com>:

- Add device-tree support to the wlcore (wl12xx/wl18xx) driver.

- Update the current users to use the bindings instead of pdata-quirks.

- Finally, remove the deprecated wl12xx_platform_data struct

Note that da850 board file code that still uses the platform data,
but we have da850.dtsi that can be used instead. So it was decided
that we should try to remove the wl12xx support from the da850
board file as suggested by Sekhar Nori <nsekhar@ti.com>. As it's
the last patch in the series, the last patch can be simply reverted
if needed.

As this series touches quite a bit of arch code, it was suggested
by Kalle Valo <kvalo@codeaurora.org> that the whole series should
be merged via the arm-soc tree.

* tag 'omap-for-v4.1/wl12xx-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  wlcore: remove wl12xx_platform_data
  ARM: dts: add wl12xx/wl18xx bindings
  wlcore: add device-tree support
  dt: bindings: add TI's wilink wireless device
  wl12xx: use frequency instead of enumerations for pdata clocks
  wlcore: set irq_trigger in board files instead of hiding behind a quirk
  + Linux 4.0-rc4

Signed-off-by: Olof Johansson <olof@lixom.net>

2 files changed, 21 insertions, 22 deletions

diff --git a/drivers/i2c/busses/i2c-designware-baytrail.c b/drivers/i2c/busses/i2c-designware-baytrail.c
index 5f1ff4cc5c34..7d7ae97476e2 100644
--- a/drivers/i2c/busses/i2c-designware-baytrail.c
+++ b/drivers/i2c/busses/i2c-designware-baytrail.c
@@ -17,27 +17,31 @@
 #include <linux/acpi.h>
 #include <linux/i2c.h>
 #include <linux/interrupt.h>
+
 #include <asm/iosf_mbi.h>
+
 #include "i2c-designware-core.h"
 
 #define SEMAPHORE_TIMEOUT	100
 #define PUNIT_SEMAPHORE		0x7
+#define PUNIT_SEMAPHORE_BIT	BIT(0)
+#define PUNIT_SEMAPHORE_ACQUIRE	BIT(1)
 
 static unsigned long acquired;
 
 static int get_sem(struct device *dev, u32 *sem)
 {
-	u32 reg_val;
+	u32 data;
 	int ret;
 
 	ret = iosf_mbi_read(BT_MBI_UNIT_PMC, BT_MBI_BUNIT_READ, PUNIT_SEMAPHORE,
-			    &reg_val);
+				&data);
 	if (ret) {
 		dev_err(dev, "iosf failed to read punit semaphore\n");
 		return ret;
 	}
 
-	*sem = reg_val & 0x1;
+	*sem = data & PUNIT_SEMAPHORE_BIT;
 
 	return 0;
 }
@@ -52,27 +56,29 @@ static void reset_semaphore(struct device *dev)
 		return;
 	}
 
-	data = data & 0xfffffffe;
+	data &= ~PUNIT_SEMAPHORE_BIT;
 	if (iosf_mbi_write(BT_MBI_UNIT_PMC, BT_MBI_BUNIT_WRITE,
-				 PUNIT_SEMAPHORE, data))
+				PUNIT_SEMAPHORE, data))
 		dev_err(dev, "iosf failed to reset punit semaphore during write\n");
 }
 
-int baytrail_i2c_acquire(struct dw_i2c_dev *dev)
+static int baytrail_i2c_acquire(struct dw_i2c_dev *dev)
 {
-	u32 sem = 0;
+	u32 sem;
 	int ret;
 	unsigned long start, end;
 
+	might_sleep();
+
 	if (!dev || !dev->dev)
 		return -ENODEV;
 
-	if (!dev->acquire_lock)
+	if (!dev->release_lock)
 		return 0;
 
-	/* host driver writes 0x2 to side band semaphore register */
+	/* host driver writes to side band semaphore register */
 	ret = iosf_mbi_write(BT_MBI_UNIT_PMC, BT_MBI_BUNIT_WRITE,
-				 PUNIT_SEMAPHORE, 0x2);
+				PUNIT_SEMAPHORE, PUNIT_SEMAPHORE_ACQUIRE);
 	if (ret) {
 		dev_err(dev->dev, "iosf punit semaphore request failed\n");
 		return ret;
@@ -81,7 +87,7 @@ int baytrail_i2c_acquire(struct dw_i2c_dev *dev)
 	/* host driver waits for bit 0 to be set in semaphore register */
 	start = jiffies;
 	end = start + msecs_to_jiffies(SEMAPHORE_TIMEOUT);
-	while (!time_after(jiffies, end)) {
+	do {
 		ret = get_sem(dev->dev, &sem);
 		if (!ret && sem) {
 			acquired = jiffies;
@@ -91,14 +97,14 @@ int baytrail_i2c_acquire(struct dw_i2c_dev *dev)
 		}
 
 		usleep_range(1000, 2000);
-	}
+	} while (time_before(jiffies, end));
 
 	dev_err(dev->dev, "punit semaphore timed out, resetting\n");
 	reset_semaphore(dev->dev);
 
 	ret = iosf_mbi_read(BT_MBI_UNIT_PMC, BT_MBI_BUNIT_READ,
-		PUNIT_SEMAPHORE, &sem);
-	if (!ret)
+				PUNIT_SEMAPHORE, &sem);
+	if (ret)
 		dev_err(dev->dev, "iosf failed to read punit semaphore\n");
 	else
 		dev_err(dev->dev, "PUNIT SEM: %d\n", sem);
@@ -107,9 +113,8 @@ int baytrail_i2c_acquire(struct dw_i2c_dev *dev)
 
 	return -ETIMEDOUT;
 }
-EXPORT_SYMBOL(baytrail_i2c_acquire);
 
-void baytrail_i2c_release(struct dw_i2c_dev *dev)
+static void baytrail_i2c_release(struct dw_i2c_dev *dev)
 {
 	if (!dev || !dev->dev)
 		return;
@@ -121,7 +126,6 @@ void baytrail_i2c_release(struct dw_i2c_dev *dev)
 	dev_dbg(dev->dev, "punit semaphore held for %ums\n",
 		jiffies_to_msecs(jiffies - acquired));
 }
-EXPORT_SYMBOL(baytrail_i2c_release);
 
 int i2c_dw_eval_lock_support(struct dw_i2c_dev *dev)
 {
@@ -137,7 +141,6 @@ int i2c_dw_eval_lock_support(struct dw_i2c_dev *dev)
 		return 0;
 
 	status = acpi_evaluate_integer(handle, "_SEM", NULL, &shared_host);
-
 	if (ACPI_FAILURE(status))
 		return 0;
 
@@ -153,7 +156,6 @@ int i2c_dw_eval_lock_support(struct dw_i2c_dev *dev)
 
 	return 0;
 }
-EXPORT_SYMBOL(i2c_dw_eval_lock_support);
 
 MODULE_AUTHOR("David E. Box <david.e.box@linux.intel.com>");
 MODULE_DESCRIPTION("Baytrail I2C Semaphore driver");
diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c
index 210cf4874cb7..edf274cabe81 100644
--- a/drivers/i2c/i2c-core.c
+++ b/drivers/i2c/i2c-core.c
@@ -679,9 +679,6 @@ static int i2c_device_remove(struct device *dev)
 		status = driver->remove(client);
 	}
 
-	if (dev->of_node)
-		irq_dispose_mapping(client->irq);
-
 	dev_pm_domain_detach(&client->dev, true);
 	return status;
 }