Merge tag 'net-next-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
 "Core & protocols:

   - Wrap datapath globals into net_aligned_data, to avoid false sharing

   - Preserve MSG_ZEROCOPY in forwarding (e.g. out of a container)

   - Add SO_INQ and SCM_INQ support to AF_UNIX

   - Add SIOCINQ support to AF_VSOCK

   - Add TCP_MAXSEG sockopt to MPTCP

   - Add IPv6 force_forwarding sysctl to enable forwarding per interface

   - Make TCP validation of whether packet fully fits in the receive
     window and the rcv_buf more strict. With increased use of HW
     aggregation a single "packet" can be multiple 100s of kB

   - Add MSG_MORE flag to optimize large TCP transmissions via sockmap,
     improves latency up to 33% for sockmap users

   - Convert TCP send queue handling from tasklet to BH workque

   - Improve BPF iteration over TCP sockets to see each socket exactly
     once

   - Remove obsolete and unused TCP RFC3517/RFC6675 loss recovery code

   - Support enabling kernel threads for NAPI processing on per-NAPI
     instance basis rather than a whole device. Fully stop the kernel
     NAPI thread when threaded NAPI gets disabled. Previously thread
     would stick around until ifdown due to tricky synchronization

   - Allow multicast routing to take effect on locally-generated packets

   - Add output interface argument for End.X in segment routing

   - MCTP: add support for gateway routing, improve bind() handling

   - Don't require rtnl_lock when fetching an IPv6 neighbor over Netlink

   - Add a new neighbor flag ("extern_valid"), which cedes refresh
     responsibilities to userspace. This is needed for EVPN multi-homing
     where a neighbor entry for a multi-homed host needs to be synced
     across all the VTEPs among which the host is multi-homed

   - Support NUD_PERMANENT for proxy neighbor entries

   - Add a new queuing discipline for IETF RFC9332 DualQ Coupled AQM

   - Add sequence numbers to netconsole messages. Unregister
     netconsole's console when all net targets are removed. Code
     refactoring. Add a number of selftests

   - Align IPSec inbound SA lookup to RFC 4301. Only SPI and protocol
     should be used for an inbound SA lookup

   - Support inspecting ref_tracker state via DebugFS

   - Don't force bonding advertisement frames tx to ~333 ms boundaries.
     Add broadcast_neighbor option to send ARP/ND on all bonded links

   - Allow providing upcall pid for the 'execute' command in openvswitch

   - Remove DCCP support from Netfilter's conntrack

   - Disallow multiple packet duplications in the queuing layer

   - Prevent use of deprecated iptables code on PREEMPT_RT

  Driver API:

   - Support RSS and hashing configuration over ethtool Netlink

   - Add dedicated ethtool callbacks for getting and setting hashing
     fields

   - Add support for power budget evaluation strategy in PSE /
     Power-over-Ethernet. Generate Netlink events for overcurrent etc

   - Support DPLL phase offset monitoring across all device inputs.
     Support providing clock reference and SYNC over separate DPLL
     inputs

   - Support traffic classes in devlink rate API for bandwidth
     management

   - Remove rtnl_lock dependency from UDP tunnel port configuration

  Device drivers:

   - Add a new Broadcom driver for 800G Ethernet (bnge)

   - Add a standalone driver for Microchip ZL3073x DPLL

   - Remove IBM's NETIUCV device driver

   - Ethernet high-speed NICs:
      - Broadcom (bnxt):
         - support zero-copy Tx of DMABUF memory
         - take page size into account for page pool recycling rings
      - Intel (100G, ice, idpf):
         - idpf: XDP and AF_XDP support preparations
         - idpf: add flow steering
         - add link_down_events statistic
         - clean up the TSPLL code
         - preparations for live VM migration
      - nVidia/Mellanox:
         - support zero-copy Rx/Tx interfaces (DMABUF and io_uring)
         - optimize context memory usage for matchers
         - expose serial numbers in devlink info
         - support PCIe congestion metrics
      - Meta (fbnic):
         - add 25G, 50G, and 100G link modes to phylink
         - support dumping FW logs
      - Marvell/Cavium:
         - support for CN20K generation of the Octeon chips
      - Amazon:
         - add HW clock (without timestamping, just hypervisor time access)

   - Ethernet virtual:
      - VirtIO net:
         - support segmentation of UDP-tunnel-encapsulated packets
      - Google (gve):
         - support packet timestamping and clock synchronization
      - Microsoft vNIC:
         - add handler for device-originated servicing events
         - allow dynamic MSI-X vector allocation
         - support Tx bandwidth clamping

   - Ethernet NICs consumer, and embedded:
      - AMD:
         - amd-xgbe: hardware timestamping and PTP clock support
      - Broadcom integrated MACs (bcmgenet, bcmasp):
         - use napi_complete_done() return value to support NAPI polling
         - add support for re-starting auto-negotiation
      - Broadcom switches (b53):
         - support BCM5325 switches
         - add bcm63xx EPHY power control
      - Synopsys (stmmac):
         - lots of code refactoring and cleanups
      - TI:
         - icssg-prueth: read firmware-names from device tree
         - icssg: PRP offload support
      - Microchip:
         - lan78xx: convert to PHYLINK for improved PHY and MAC management
         - ksz: add KSZ8463 switch support
      - Intel:
         - support similar queue priority scheme in multi-queue and
           time-sensitive networking (taprio)
         - support packet pre-emption in both
      - RealTek (r8169):
         - enable EEE at 5Gbps on RTL8126
      - Airoha:
         - add PPPoE offload support
         - MDIO bus controller for Airoha AN7583

   - Ethernet PHYs:
      - support for the IPQ5018 internal GE PHY
      - micrel KSZ9477 switch-integrated PHYs:
         - add MDI/MDI-X control support
         - add RX error counters
         - add cable test support
         - add Signal Quality Indicator (SQI) reporting
      - dp83tg720: improve reset handling and reduce link recovery time
      - support bcm54811 (and its MII-Lite interface type)
      - air_en8811h: support resume/suspend
      - support PHY counters for QCA807x and QCA808x
      - support WoL for QCA807x

   - CAN drivers:
      - rcar_canfd: support for Transceiver Delay Compensation
      - kvaser: report FW versions via devlink dev info

   - WiFi:
      - extended regulatory info support (6 GHz)
      - add statistics and beacon monitor for Multi-Link Operation (MLO)
      - support S1G aggregation, improve S1G support
      - add Radio Measurement action fields
      - support per-radio RTS threshold
      - some work around how FIPS affects wifi, which was wrong (RC4 is
        used by TKIP, not only WEP)
      - improvements for unsolicited probe response handling

   - WiFi drivers:
      - RealTek (rtw88):
         - IBSS mode for SDIO devices
      - RealTek (rtw89):
         - BT coexistence for MLO/WiFi7
         - concurrent station + P2P support
         - support for USB devices RTL8851BU/RTL8852BU
      - Intel (iwlwifi):
         - use embedded PNVM in (to be released) FW images to fix
           compatibility issues
         - many cleanups (unused FW APIs, PCIe code, WoWLAN)
         - some FIPS interoperability
      - MediaTek (mt76):
         - firmware recovery improvements
         - more MLO work
      - Qualcomm/Atheros (ath12k):
         - fix scan on multi-radio devices
         - more EHT/Wi-Fi 7 features
         - encapsulation/decapsulation offload
      - Broadcom (brcm80211):
         - support SDIO 43751 device

   - Bluetooth:
      - hci_event: add support for handling LE BIG Sync Lost event
      - ISO: add socket option to report packet seqnum via CMSG
      - ISO: support SCM_TIMESTAMPING for ISO TS

   - Bluetooth drivers:
      - intel_pcie: support Function Level Reset
      - nxpuart: add support for 4M baudrate
      - nxpuart: implement powerup sequence, reset, FW dump, and FW loading"

* tag 'net-next-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1742 commits)
  dpll: zl3073x: Fix build failure
  selftests: bpf: fix legacy netfilter options
  ipv6: annotate data-races around rt->fib6_nsiblings
  ipv6: fix possible infinite loop in fib6_info_uses_dev()
  ipv6: prevent infinite loop in rt6_nlmsg_size()
  ipv6: add a retry logic in net6_rt_notify()
  vrf: Drop existing dst reference in vrf_ip6_input_dst
  net/sched: taprio: align entry index attr validation with mqprio
  net: fsl_pq_mdio: use dev_err_probe
  selftests: rtnetlink.sh: remove esp4_offload after test
  vsock: remove unnecessary null check in vsock_getname()
  igb: xsk: solve negative overflow of nb_pkts in zerocopy mode
  stmmac: xsk: fix negative overflow of budget in zerocopy mode
  dt-bindings: ieee802154: Convert at86rf230.txt yaml format
  net: dsa: microchip: Disable PTP function of KSZ8463
  net: dsa: microchip: Setup fiber ports for KSZ8463
  net: dsa: microchip: Write switch MAC address differently for KSZ8463
  net: dsa: microchip: Use different registers for KSZ8463
  net: dsa: microchip: Add KSZ8463 switch support to KSZ DSA driver
  dt-bindings: net: dsa: microchip: Add KSZ8463 switch support
  ...

9 files changed, 364 insertions, 57 deletions

diff --git a/drivers/net/can/usb/Kconfig b/drivers/net/can/usb/Kconfig
index 9dae0c71a2e1..a7547a83120e 100644
--- a/drivers/net/can/usb/Kconfig
+++ b/drivers/net/can/usb/Kconfig
@@ -66,6 +66,7 @@ config CAN_GS_USB
 
 config CAN_KVASER_USB
 	tristate "Kvaser CAN/USB interface"
+	select NET_DEVLINK
 	help
 	  This driver adds support for Kvaser CAN/USB devices like Kvaser
 	  Leaf Light, Kvaser USBcan II and Kvaser Memorator Pro 5xHS.
diff --git a/drivers/net/can/usb/etas_es58x/es58x_fd.c b/drivers/net/can/usb/etas_es58x/es58x_fd.c
index d924b053677b..6476add1c105 100644
--- a/drivers/net/can/usb/etas_es58x/es58x_fd.c
+++ b/drivers/net/can/usb/etas_es58x/es58x_fd.c
@@ -429,7 +429,7 @@ static int es58x_fd_enable_channel(struct es58x_priv *priv)
 		es58x_fd_convert_bittiming(&tx_conf_msg.data_bittiming,
 					   &priv->can.fd.data_bittiming);
 
-		if (can_tdc_is_enabled(&priv->can)) {
+		if (can_fd_tdc_is_enabled(&priv->can)) {
 			tx_conf_msg.tdc_enabled = 1;
 			tx_conf_msg.tdco = cpu_to_le16(priv->can.fd.tdc.tdco);
 			tx_conf_msg.tdcf = cpu_to_le16(priv->can.fd.tdc.tdcf);
diff --git a/drivers/net/can/usb/kvaser_usb/Makefile b/drivers/net/can/usb/kvaser_usb/Makefile
index cf260044f0b9..41b4a11555aa 100644
--- a/drivers/net/can/usb/kvaser_usb/Makefile
+++ b/drivers/net/can/usb/kvaser_usb/Makefile
@@ -1,3 +1,3 @@
 # SPDX-License-Identifier: GPL-2.0-only
 obj-$(CONFIG_CAN_KVASER_USB) += kvaser_usb.o
-kvaser_usb-y = kvaser_usb_core.o kvaser_usb_leaf.o kvaser_usb_hydra.o
+kvaser_usb-y = kvaser_usb_core.o kvaser_usb_devlink.o kvaser_usb_leaf.o kvaser_usb_hydra.o
diff --git a/drivers/net/can/usb/kvaser_usb/kvaser_usb.h b/drivers/net/can/usb/kvaser_usb/kvaser_usb.h
index f6c77eca9f43..46a1b6907a50 100644
--- a/drivers/net/can/usb/kvaser_usb/kvaser_usb.h
+++ b/drivers/net/can/usb/kvaser_usb/kvaser_usb.h
@@ -27,6 +27,7 @@
 #include <linux/spinlock.h>
 #include <linux/types.h>
 #include <linux/usb.h>
+#include <net/devlink.h>
 
 #include <linux/can.h>
 #include <linux/can/dev.h>
@@ -47,6 +48,10 @@
 #define KVASER_USB_CAP_EXT_CAP			0x02
 #define KVASER_USB_HYDRA_CAP_EXT_CMD		0x04
 
+#define KVASER_USB_SW_VERSION_MAJOR_MASK GENMASK(31, 24)
+#define KVASER_USB_SW_VERSION_MINOR_MASK GENMASK(23, 16)
+#define KVASER_USB_SW_VERSION_BUILD_MASK GENMASK(15, 0)
+
 struct kvaser_usb_dev_cfg;
 
 enum kvaser_usb_leaf_family {
@@ -54,6 +59,11 @@ enum kvaser_usb_leaf_family {
 	KVASER_USBCAN,
 };
 
+enum kvaser_usb_led_state {
+	KVASER_USB_LED_ON = 0,
+	KVASER_USB_LED_OFF = 1,
+};
+
 #define KVASER_USB_HYDRA_MAX_CMD_LEN		128
 struct kvaser_usb_dev_card_data_hydra {
 	u8 channel_to_he[KVASER_USB_MAX_NET_DEVICES];
@@ -78,6 +88,12 @@ struct kvaser_usb_tx_urb_context {
 	u32 echo_index;
 };
 
+struct kvaser_usb_fw_version {
+	u8 major;
+	u8 minor;
+	u16 build;
+};
+
 struct kvaser_usb_busparams {
 	__le32 bitrate;
 	u8 tseg1;
@@ -96,12 +112,15 @@ struct kvaser_usb {
 	struct usb_endpoint_descriptor *bulk_in, *bulk_out;
 	struct usb_anchor rx_submitted;
 
+	u32 ean[2];
+	u32 serial_number;
+	struct kvaser_usb_fw_version fw_version;
+	u8 hw_revision;
+	unsigned int nchannels;
 	/* @max_tx_urbs: Firmware-reported maximum number of outstanding,
 	 * not yet ACKed, transmissions on this device. This value is
 	 * also used as a sentinel for marking free tx contexts.
 	 */
-	u32 fw_version;
-	unsigned int nchannels;
 	unsigned int max_tx_urbs;
 	struct kvaser_usb_dev_card_data card_data;
 
@@ -112,6 +131,7 @@ struct kvaser_usb {
 
 struct kvaser_usb_net_priv {
 	struct can_priv can;
+	struct devlink_port devlink_port;
 	struct can_berr_counter bec;
 
 	/* subdriver-specific data */
@@ -149,6 +169,7 @@ struct kvaser_usb_net_priv {
  * @dev_get_software_details:	get software details
  * @dev_get_card_info:		get card info
  * @dev_get_capabilities:	discover device capabilities
+ * @dev_set_led:		turn on/off device LED
  *
  * @dev_set_opt_mode:		set ctrlmod
  * @dev_start_chip:		start the CAN controller
@@ -176,6 +197,9 @@ struct kvaser_usb_dev_ops {
 	int (*dev_get_software_details)(struct kvaser_usb *dev);
 	int (*dev_get_card_info)(struct kvaser_usb *dev);
 	int (*dev_get_capabilities)(struct kvaser_usb *dev);
+	int (*dev_set_led)(struct kvaser_usb_net_priv *priv,
+			   enum kvaser_usb_led_state state,
+			   u16 duration_ms);
 	int (*dev_set_opt_mode)(const struct kvaser_usb_net_priv *priv);
 	int (*dev_start_chip)(struct kvaser_usb_net_priv *priv);
 	int (*dev_stop_chip)(struct kvaser_usb_net_priv *priv);
@@ -204,6 +228,11 @@ struct kvaser_usb_dev_cfg {
 extern const struct kvaser_usb_dev_ops kvaser_usb_hydra_dev_ops;
 extern const struct kvaser_usb_dev_ops kvaser_usb_leaf_dev_ops;
 
+extern const struct devlink_ops kvaser_usb_devlink_ops;
+
+int kvaser_usb_devlink_port_register(struct kvaser_usb_net_priv *priv);
+void kvaser_usb_devlink_port_unregister(struct kvaser_usb_net_priv *priv);
+
 void kvaser_usb_unlink_tx_urbs(struct kvaser_usb_net_priv *priv);
 
 int kvaser_usb_recv_cmd(const struct kvaser_usb *dev, void *cmd, int len,
diff --git a/drivers/net/can/usb/kvaser_usb/kvaser_usb_core.c b/drivers/net/can/usb/kvaser_usb/kvaser_usb_core.c
index daf42080f942..90e77fa0ff4a 100644
--- a/drivers/net/can/usb/kvaser_usb/kvaser_usb_core.c
+++ b/drivers/net/can/usb/kvaser_usb/kvaser_usb_core.c
@@ -364,10 +364,13 @@ resubmit_urb:
 	err = usb_submit_urb(urb, GFP_ATOMIC);
 	if (err == -ENODEV) {
 		for (i = 0; i < dev->nchannels; i++) {
-			if (!dev->nets[i])
+			struct kvaser_usb_net_priv *priv;
+
+			priv = dev->nets[i];
+			if (!priv)
 				continue;
 
-			netif_device_detach(dev->nets[i]->netdev);
+			netif_device_detach(priv->netdev);
 		}
 	} else if (err) {
 		dev_err(&dev->intf->dev,
@@ -753,6 +756,31 @@ freeurb:
 	return ret;
 }
 
+static int kvaser_usb_set_phys_id(struct net_device *netdev,
+				  enum ethtool_phys_id_state state)
+{
+	struct kvaser_usb_net_priv *priv = netdev_priv(netdev);
+	const struct kvaser_usb_dev_ops *ops = priv->dev->driver_info->ops;
+
+	switch (state) {
+	case ETHTOOL_ID_ACTIVE:
+		return 3; /* 3 On/Off cycles per second */
+
+	case ETHTOOL_ID_ON:
+		return ops->dev_set_led(priv, KVASER_USB_LED_ON, 1000);
+
+	case ETHTOOL_ID_OFF:
+		return ops->dev_set_led(priv, KVASER_USB_LED_OFF, 1000);
+
+	case ETHTOOL_ID_INACTIVE:
+		/* Turn LED off and restore standard function after 1ms */
+		return ops->dev_set_led(priv, KVASER_USB_LED_OFF, 1);
+
+	default:
+		return -EINVAL;
+	}
+}
+
 static const struct net_device_ops kvaser_usb_netdev_ops = {
 	.ndo_open = kvaser_usb_open,
 	.ndo_stop = kvaser_usb_close,
@@ -763,30 +791,35 @@ static const struct net_device_ops kvaser_usb_netdev_ops = {
 
 static const struct ethtool_ops kvaser_usb_ethtool_ops = {
 	.get_ts_info = can_ethtool_op_get_ts_info_hwts,
+	.set_phys_id = kvaser_usb_set_phys_id,
 };
 
 static void kvaser_usb_remove_interfaces(struct kvaser_usb *dev)
 {
 	const struct kvaser_usb_dev_ops *ops = dev->driver_info->ops;
 	int i;
+	struct kvaser_usb_net_priv *priv;
 
 	for (i = 0; i < dev->nchannels; i++) {
-		if (!dev->nets[i])
+		priv = dev->nets[i];
+		if (!priv)
 			continue;
 
-		unregister_candev(dev->nets[i]->netdev);
+		unregister_candev(priv->netdev);
 	}
 
 	kvaser_usb_unlink_all_urbs(dev);
 
 	for (i = 0; i < dev->nchannels; i++) {
-		if (!dev->nets[i])
+		priv = dev->nets[i];
+		if (!priv)
 			continue;
 
 		if (ops->dev_remove_channel)
-			ops->dev_remove_channel(dev->nets[i]);
+			ops->dev_remove_channel(priv);
 
-		free_candev(dev->nets[i]->netdev);
+		kvaser_usb_devlink_port_unregister(priv);
+		free_candev(priv->netdev);
 	}
 }
 
@@ -852,26 +885,35 @@ static int kvaser_usb_init_one(struct kvaser_usb *dev, int channel)
 	netdev->ethtool_ops = &kvaser_usb_ethtool_ops;
 	SET_NETDEV_DEV(netdev, &dev->intf->dev);
 	netdev->dev_id = channel;
+	netdev->dev_port = channel;
 
 	dev->nets[channel] = priv;
 
 	if (ops->dev_init_channel) {
 		err = ops->dev_init_channel(priv);
 		if (err)
-			goto err;
+			goto candev_free;
+	}
+
+	err = kvaser_usb_devlink_port_register(priv);
+	if (err) {
+		dev_err(&dev->intf->dev, "Failed to register devlink port\n");
+		goto candev_free;
 	}
 
 	err = register_candev(netdev);
 	if (err) {
 		dev_err(&dev->intf->dev, "Failed to register CAN device\n");
-		goto err;
+		goto unregister_devlink_port;
 	}
 
 	netdev_dbg(netdev, "device registered\n");
 
 	return 0;
 
-err:
+unregister_devlink_port:
+	kvaser_usb_devlink_port_unregister(priv);
+candev_free:
 	free_candev(netdev);
 	dev->nets[channel] = NULL;
 	return err;
@@ -881,6 +923,7 @@ static int kvaser_usb_probe(struct usb_interface *intf,
 			    const struct usb_device_id *id)
 {
 	struct kvaser_usb *dev;
+	struct devlink *devlink;
 	int err;
 	int i;
 	const struct kvaser_usb_driver_info *driver_info;
@@ -890,17 +933,20 @@ static int kvaser_usb_probe(struct usb_interface *intf,
 	if (!driver_info)
 		return -ENODEV;
 
-	dev = devm_kzalloc(&intf->dev, sizeof(*dev), GFP_KERNEL);
-	if (!dev)
+	devlink = devlink_alloc(&kvaser_usb_devlink_ops, sizeof(*dev), &intf->dev);
+	if (!devlink)
 		return -ENOMEM;
 
+	dev = devlink_priv(devlink);
 	dev->intf = intf;
 	dev->driver_info = driver_info;
 	ops = driver_info->ops;
 
 	err = ops->dev_setup_endpoints(dev);
-	if (err)
-		return dev_err_probe(&intf->dev, err, "Cannot get usb endpoint(s)");
+	if (err) {
+		dev_err_probe(&intf->dev, err, "Cannot get usb endpoint(s)");
+		goto free_devlink;
+	}
 
 	dev->udev = interface_to_usbdev(intf);
 
@@ -911,55 +957,66 @@ static int kvaser_usb_probe(struct usb_interface *intf,
 	dev->card_data.ctrlmode_supported = 0;
 	dev->card_data.capabilities = 0;
 	err = ops->dev_init_card(dev);
-	if (err)
-		return dev_err_probe(&intf->dev, err,
-				     "Failed to initialize card\n");
+	if (err) {
+		dev_err_probe(&intf->dev, err,
+			      "Failed to initialize card\n");
+		goto free_devlink;
+	}
 
 	err = ops->dev_get_software_info(dev);
-	if (err)
-		return dev_err_probe(&intf->dev, err,
-				     "Cannot get software info\n");
+	if (err) {
+		dev_err_probe(&intf->dev, err,
+			      "Cannot get software info\n");
+		goto free_devlink;
+	}
 
 	if (ops->dev_get_software_details) {
 		err = ops->dev_get_software_details(dev);
-		if (err)
-			return dev_err_probe(&intf->dev, err,
-					     "Cannot get software details\n");
+		if (err) {
+			dev_err_probe(&intf->dev, err,
+				      "Cannot get software details\n");
+			goto free_devlink;
+		}
 	}
 
-	if (WARN_ON(!dev->cfg))
-		return -ENODEV;
-
-	dev_dbg(&intf->dev, "Firmware version: %d.%d.%d\n",
-		((dev->fw_version >> 24) & 0xff),
-		((dev->fw_version >> 16) & 0xff),
-		(dev->fw_version & 0xffff));
+	if (WARN_ON(!dev->cfg)) {
+		err = -ENODEV;
+		goto free_devlink;
+	}
 
 	dev_dbg(&intf->dev, "Max outstanding tx = %d URBs\n", dev->max_tx_urbs);
 
 	err = ops->dev_get_card_info(dev);
-	if (err)
-		return dev_err_probe(&intf->dev, err,
-				     "Cannot get card info\n");
+	if (err) {
+		dev_err_probe(&intf->dev, err,
+			      "Cannot get card info\n");
+		goto free_devlink;
+	}
 
 	if (ops->dev_get_capabilities) {
 		err = ops->dev_get_capabilities(dev);
 		if (err) {
-			kvaser_usb_remove_interfaces(dev);
-			return dev_err_probe(&intf->dev, err,
-					     "Cannot get capabilities\n");
+			dev_err_probe(&intf->dev, err,
+				      "Cannot get capabilities\n");
+			goto remove_interfaces;
 		}
 	}
 
 	for (i = 0; i < dev->nchannels; i++) {
 		err = kvaser_usb_init_one(dev, i);
-		if (err) {
-			kvaser_usb_remove_interfaces(dev);
-			return err;
-		}
+		if (err)
+			goto remove_interfaces;
 	}
+	devlink_register(devlink);
 
 	return 0;
+
+remove_interfaces:
+	kvaser_usb_remove_interfaces(dev);
+free_devlink:
+	devlink_free(devlink);
+
+	return err;
 }
 
 static void kvaser_usb_disconnect(struct usb_interface *intf)
@@ -972,6 +1029,8 @@ static void kvaser_usb_disconnect(struct usb_interface *intf)
 		return;
 
 	kvaser_usb_remove_interfaces(dev);
+	devlink_unregister(priv_to_devlink(dev));
+	devlink_free(priv_to_devlink(dev));
 }
 
 static struct usb_driver kvaser_usb_driver = {
diff --git a/drivers/net/can/usb/kvaser_usb/kvaser_usb_devlink.c b/drivers/net/can/usb/kvaser_usb/kvaser_usb_devlink.c
new file mode 100644
index 000000000000..e838b82298ae
--- /dev/null
+++ b/drivers/net/can/usb/kvaser_usb/kvaser_usb_devlink.c
@@ -0,0 +1,87 @@
+// SPDX-License-Identifier: GPL-2.0
+/* kvaser_usb devlink functions
+ *
+ * Copyright (C) 2025 KVASER AB, Sweden. All rights reserved.
+ */
+#include "kvaser_usb.h"
+
+#include <linux/netdevice.h>
+#include <net/devlink.h>
+
+#define KVASER_USB_EAN_MSB 0x00073301
+
+static int kvaser_usb_devlink_info_get(struct devlink *devlink,
+				       struct devlink_info_req *req,
+				       struct netlink_ext_ack *extack)
+{
+	struct kvaser_usb *dev = devlink_priv(devlink);
+	char buf[] = "73301XXXXXXXXXX";
+	int ret;
+
+	if (dev->serial_number) {
+		snprintf(buf, sizeof(buf), "%u", dev->serial_number);
+		ret = devlink_info_serial_number_put(req, buf);
+		if (ret)
+			return ret;
+	}
+
+	if (dev->fw_version.major) {
+		snprintf(buf, sizeof(buf), "%u.%u.%u",
+			 dev->fw_version.major,
+			 dev->fw_version.minor,
+			 dev->fw_version.build);
+		ret = devlink_info_version_running_put(req,
+						       DEVLINK_INFO_VERSION_GENERIC_FW,
+						       buf);
+		if (ret)
+			return ret;
+	}
+
+	if (dev->hw_revision) {
+		snprintf(buf, sizeof(buf), "%u", dev->hw_revision);
+		ret = devlink_info_version_fixed_put(req,
+						     DEVLINK_INFO_VERSION_GENERIC_BOARD_REV,
+						     buf);
+		if (ret)
+			return ret;
+	}
+
+	if (dev->ean[1] == KVASER_USB_EAN_MSB) {
+		snprintf(buf, sizeof(buf), "%x%08x", dev->ean[1], dev->ean[0]);
+		ret = devlink_info_version_fixed_put(req,
+						     DEVLINK_INFO_VERSION_GENERIC_BOARD_ID,
+						     buf);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+
+const struct devlink_ops kvaser_usb_devlink_ops = {
+	.info_get = kvaser_usb_devlink_info_get,
+};
+
+int kvaser_usb_devlink_port_register(struct kvaser_usb_net_priv *priv)
+{
+	int ret;
+	struct devlink_port_attrs attrs = {
+		.flavour = DEVLINK_PORT_FLAVOUR_PHYSICAL,
+		.phys.port_number = priv->channel,
+	};
+	devlink_port_attrs_set(&priv->devlink_port, &attrs);
+
+	ret = devlink_port_register(priv_to_devlink(priv->dev),
+				    &priv->devlink_port, priv->channel);
+	if (ret)
+		return ret;
+
+	SET_NETDEV_DEVLINK_PORT(priv->netdev, &priv->devlink_port);
+
+	return 0;
+}
+
+void kvaser_usb_devlink_port_unregister(struct kvaser_usb_net_priv *priv)
+{
+	devlink_port_unregister(&priv->devlink_port);
+}
diff --git a/drivers/net/can/usb/kvaser_usb/kvaser_usb_hydra.c b/drivers/net/can/usb/kvaser_usb/kvaser_usb_hydra.c
index 8e88b5917796..a59f20dad692 100644
--- a/drivers/net/can/usb/kvaser_usb/kvaser_usb_hydra.c
+++ b/drivers/net/can/usb/kvaser_usb/kvaser_usb_hydra.c
@@ -12,6 +12,7 @@
  *    distinguish between ERROR_WARNING and ERROR_ACTIVE.
  */
 
+#include <linux/bitfield.h>
 #include <linux/completion.h>
 #include <linux/device.h>
 #include <linux/gfp.h>
@@ -67,6 +68,8 @@ static const struct kvaser_usb_dev_cfg kvaser_usb_hydra_dev_cfg_rt;
 #define CMD_SET_BUSPARAMS_RESP			85
 #define CMD_GET_CAPABILITIES_REQ		95
 #define CMD_GET_CAPABILITIES_RESP		96
+#define CMD_LED_ACTION_REQ			101
+#define CMD_LED_ACTION_RESP			102
 #define CMD_RX_MESSAGE				106
 #define CMD_MAP_CHANNEL_REQ			200
 #define CMD_MAP_CHANNEL_RESP			201
@@ -111,7 +114,7 @@ struct kvaser_cmd_card_info {
 	__le32 clock_res;
 	__le32 mfg_date;
 	__le32 ean[2];
-	u8 hw_version;
+	u8 hw_revision;
 	u8 usb_mode;
 	u8 hw_type;
 	u8 reserved0;
@@ -217,6 +220,22 @@ struct kvaser_cmd_get_busparams_res {
 	u8 reserved[20];
 } __packed;
 
+/* The device has two LEDs per CAN channel
+ * The LSB of action field controls the state:
+ *   0 = ON
+ *   1 = OFF
+ * The remaining bits of action field is the LED index
+ */
+#define KVASER_USB_HYDRA_LED_IDX_MASK GENMASK(31, 1)
+#define KVASER_USB_HYDRA_LED_YELLOW_CH0_IDX 3
+#define KVASER_USB_HYDRA_LEDS_PER_CHANNEL 2
+struct kvaser_cmd_led_action_req {
+	u8 action;
+	u8 padding;
+	__le16 duration_ms;
+	u8 reserved[24];
+} __packed;
+
 /* Ctrl modes */
 #define KVASER_USB_HYDRA_CTRLMODE_NORMAL	0x01
 #define KVASER_USB_HYDRA_CTRLMODE_LISTEN	0x02
@@ -299,6 +318,8 @@ struct kvaser_cmd {
 		struct kvaser_cmd_get_busparams_req get_busparams_req;
 		struct kvaser_cmd_get_busparams_res get_busparams_res;
 
+		struct kvaser_cmd_led_action_req led_action_req;
+
 		struct kvaser_cmd_chip_state_event chip_state_event;
 
 		struct kvaser_cmd_set_ctrlmode set_ctrlmode;
@@ -1390,6 +1411,7 @@ static void kvaser_usb_hydra_handle_cmd_std(const struct kvaser_usb *dev,
 	/* Ignored commands */
 	case CMD_SET_BUSPARAMS_RESP:
 	case CMD_SET_BUSPARAMS_FD_RESP:
+	case CMD_LED_ACTION_RESP:
 		break;
 
 	default:
@@ -1817,6 +1839,7 @@ static int kvaser_usb_hydra_get_software_details(struct kvaser_usb *dev)
 	size_t cmd_len;
 	int err;
 	u32 flags;
+	u32 fw_version;
 	struct kvaser_usb_dev_card_data *card_data = &dev->card_data;
 
 	cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
@@ -1841,7 +1864,10 @@ static int kvaser_usb_hydra_get_software_details(struct kvaser_usb *dev)
 	if (err)
 		goto end;
 
-	dev->fw_version = le32_to_cpu(cmd->sw_detail_res.sw_version);
+	fw_version = le32_to_cpu(cmd->sw_detail_res.sw_version);
+	dev->fw_version.major = FIELD_GET(KVASER_USB_SW_VERSION_MAJOR_MASK, fw_version);
+	dev->fw_version.minor = FIELD_GET(KVASER_USB_SW_VERSION_MINOR_MASK, fw_version);
+	dev->fw_version.build = FIELD_GET(KVASER_USB_SW_VERSION_BUILD_MASK, fw_version);
 	flags = le32_to_cpu(cmd->sw_detail_res.sw_flags);
 
 	if (flags & KVASER_USB_HYDRA_SW_FLAG_FW_BAD) {
@@ -1892,6 +1918,10 @@ static int kvaser_usb_hydra_get_card_info(struct kvaser_usb *dev)
 	err = kvaser_usb_hydra_wait_cmd(dev, CMD_GET_CARD_INFO_RESP, &cmd);
 	if (err)
 		return err;
+	dev->ean[1] = le32_to_cpu(cmd.card_info.ean[1]);
+	dev->ean[0] = le32_to_cpu(cmd.card_info.ean[0]);
+	dev->serial_number = le32_to_cpu(cmd.card_info.serial_number);
+	dev->hw_revision = cmd.card_info.hw_revision;
 
 	dev->nchannels = cmd.card_info.nchannels;
 	if (dev->nchannels > KVASER_USB_MAX_NET_DEVICES)
@@ -1946,6 +1976,36 @@ static int kvaser_usb_hydra_get_capabilities(struct kvaser_usb *dev)
 	return 0;
 }
 
+static int kvaser_usb_hydra_set_led(struct kvaser_usb_net_priv *priv,
+				    enum kvaser_usb_led_state state,
+				    u16 duration_ms)
+{
+	struct kvaser_usb *dev = priv->dev;
+	struct kvaser_cmd *cmd;
+	size_t cmd_len;
+	int ret;
+
+	cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
+	if (!cmd)
+		return -ENOMEM;
+
+	cmd->header.cmd_no = CMD_LED_ACTION_REQ;
+	cmd_len = kvaser_usb_hydra_cmd_size(cmd);
+	kvaser_usb_hydra_set_cmd_dest_he(cmd, dev->card_data.hydra.sysdbg_he);
+	kvaser_usb_hydra_set_cmd_transid(cmd, kvaser_usb_hydra_get_next_transid(dev));
+
+	cmd->led_action_req.duration_ms = cpu_to_le16(duration_ms);
+	cmd->led_action_req.action = state |
+				     FIELD_PREP(KVASER_USB_HYDRA_LED_IDX_MASK,
+						KVASER_USB_HYDRA_LED_YELLOW_CH0_IDX +
+						KVASER_USB_HYDRA_LEDS_PER_CHANNEL * priv->channel);
+
+	ret = kvaser_usb_send_cmd(dev, cmd, cmd_len);
+	kfree(cmd);
+
+	return ret;
+}
+
 static int kvaser_usb_hydra_set_opt_mode(const struct kvaser_usb_net_priv *priv)
 {
 	struct kvaser_usb *dev = priv->dev;
@@ -2149,6 +2209,7 @@ const struct kvaser_usb_dev_ops kvaser_usb_hydra_dev_ops = {
 	.dev_get_software_details = kvaser_usb_hydra_get_software_details,
 	.dev_get_card_info = kvaser_usb_hydra_get_card_info,
 	.dev_get_capabilities = kvaser_usb_hydra_get_capabilities,
+	.dev_set_led = kvaser_usb_hydra_set_led,
 	.dev_set_opt_mode = kvaser_usb_hydra_set_opt_mode,
 	.dev_start_chip = kvaser_usb_hydra_start_chip,
 	.dev_stop_chip = kvaser_usb_hydra_stop_chip,
diff --git a/drivers/net/can/usb/kvaser_usb/kvaser_usb_leaf.c b/drivers/net/can/usb/kvaser_usb/kvaser_usb_leaf.c
index 6a45adcc45bd..c29828a94ad0 100644
--- a/drivers/net/can/usb/kvaser_usb/kvaser_usb_leaf.c
+++ b/drivers/net/can/usb/kvaser_usb/kvaser_usb_leaf.c
@@ -10,6 +10,7 @@
  * Copyright (C) 2015 Valeo S.A.
  */
 
+#include <linux/bitfield.h>
 #include <linux/completion.h>
 #include <linux/device.h>
 #include <linux/gfp.h>
@@ -81,6 +82,8 @@
 #define CMD_FLUSH_QUEUE_REPLY		68
 #define CMD_GET_CAPABILITIES_REQ	95
 #define CMD_GET_CAPABILITIES_RESP	96
+#define CMD_LED_ACTION_REQ		101
+#define CMD_LED_ACTION_RESP		102
 
 #define CMD_LEAF_LOG_MESSAGE		106
 
@@ -135,7 +138,7 @@ struct kvaser_cmd_cardinfo {
 	__le32 padding0;
 	__le32 clock_resolution;
 	__le32 mfgdate;
-	u8 ean[8];
+	__le32 ean[2];
 	u8 hw_revision;
 	union {
 		struct {
@@ -173,6 +176,21 @@ struct kvaser_cmd_busparams {
 	struct kvaser_usb_busparams busparams;
 } __packed;
 
+/* The device has one LED per CAN channel
+ * The LSB of action field controls the state:
+ *   0 = ON
+ *   1 = OFF
+ * The remaining bits of action field is the LED index
+ */
+#define KVASER_USB_LEAF_LED_IDX_MASK GENMASK(31, 1)
+#define KVASER_USB_LEAF_LED_YELLOW_CH0_IDX 2
+struct kvaser_cmd_led_action_req {
+	u8 tid;
+	u8 action;
+	__le16 duration_ms;
+	u8 padding[24];
+} __packed;
+
 struct kvaser_cmd_tx_can {
 	u8 channel;
 	u8 tid;
@@ -359,6 +377,8 @@ struct kvaser_cmd {
 		struct kvaser_cmd_cardinfo cardinfo;
 		struct kvaser_cmd_busparams busparams;
 
+		struct kvaser_cmd_led_action_req led_action_req;
+
 		struct kvaser_cmd_rx_can_header rx_can_header;
 		struct kvaser_cmd_tx_acknowledge_header tx_acknowledge_header;
 
@@ -409,6 +429,7 @@ static const u8 kvaser_usb_leaf_cmd_sizes_leaf[] = {
 	[CMD_ERROR_EVENT]		= kvaser_fsize(u.leaf.error_event),
 	/* ignored events: */
 	[CMD_FLUSH_QUEUE_REPLY]		= CMD_SIZE_ANY,
+	[CMD_LED_ACTION_RESP]		= CMD_SIZE_ANY,
 };
 
 static const u8 kvaser_usb_leaf_cmd_sizes_usbcan[] = {
@@ -423,6 +444,8 @@ static const u8 kvaser_usb_leaf_cmd_sizes_usbcan[] = {
 	[CMD_CAN_ERROR_EVENT]		= kvaser_fsize(u.usbcan.can_error_event),
 	[CMD_ERROR_EVENT]		= kvaser_fsize(u.usbcan.error_event),
 	[CMD_USBCAN_CLOCK_OVERFLOW_EVENT] = kvaser_fsize(u.usbcan.clk_overflow_event),
+	/* ignored events: */
+	[CMD_LED_ACTION_RESP]		= CMD_SIZE_ANY,
 };
 
 /* Summary of a kvaser error event, for a unified Leaf/Usbcan error
@@ -718,9 +741,13 @@ static int kvaser_usb_leaf_send_simple_cmd(const struct kvaser_usb *dev,
 static void kvaser_usb_leaf_get_software_info_leaf(struct kvaser_usb *dev,
 						   const struct leaf_cmd_softinfo *softinfo)
 {
+	u32 fw_version;
 	u32 sw_options = le32_to_cpu(softinfo->sw_options);
 
-	dev->fw_version = le32_to_cpu(softinfo->fw_version);
+	fw_version = le32_to_cpu(softinfo->fw_version);
+	dev->fw_version.major = FIELD_GET(KVASER_USB_SW_VERSION_MAJOR_MASK, fw_version);
+	dev->fw_version.minor = FIELD_GET(KVASER_USB_SW_VERSION_MINOR_MASK, fw_version);
+	dev->fw_version.build = FIELD_GET(KVASER_USB_SW_VERSION_BUILD_MASK, fw_version);
 	dev->max_tx_urbs = le16_to_cpu(softinfo->max_outstanding_tx);
 
 	if (sw_options & KVASER_USB_LEAF_SWOPTION_EXT_CAP)
@@ -761,6 +788,7 @@ static int kvaser_usb_leaf_get_software_info_inner(struct kvaser_usb *dev)
 {
 	struct kvaser_cmd cmd;
 	int err;
+	u32 fw_version;
 
 	err = kvaser_usb_leaf_send_simple_cmd(dev, CMD_GET_SOFTWARE_INFO, 0);
 	if (err)
@@ -775,7 +803,13 @@ static int kvaser_usb_leaf_get_software_info_inner(struct kvaser_usb *dev)
 		kvaser_usb_leaf_get_software_info_leaf(dev, &cmd.u.leaf.softinfo);
 		break;
 	case KVASER_USBCAN:
-		dev->fw_version = le32_to_cpu(cmd.u.usbcan.softinfo.fw_version);
+		fw_version = le32_to_cpu(cmd.u.usbcan.softinfo.fw_version);
+		dev->fw_version.major = FIELD_GET(KVASER_USB_SW_VERSION_MAJOR_MASK,
+						  fw_version);
+		dev->fw_version.minor = FIELD_GET(KVASER_USB_SW_VERSION_MINOR_MASK,
+						  fw_version);
+		dev->fw_version.build = FIELD_GET(KVASER_USB_SW_VERSION_BUILD_MASK,
+						  fw_version);
 		dev->max_tx_urbs =
 			le16_to_cpu(cmd.u.usbcan.softinfo.max_outstanding_tx);
 		dev->cfg = &kvaser_usb_leaf_usbcan_dev_cfg;
@@ -820,6 +854,10 @@ static int kvaser_usb_leaf_get_card_info(struct kvaser_usb *dev)
 	    (dev->driver_info->family == KVASER_USBCAN &&
 	     dev->nchannels > MAX_USBCAN_NET_DEVICES))
 		return -EINVAL;
+	dev->ean[1] = le32_to_cpu(cmd.u.cardinfo.ean[1]);
+	dev->ean[0] = le32_to_cpu(cmd.u.cardinfo.ean[0]);
+	dev->serial_number = le32_to_cpu(cmd.u.cardinfo.serial_number);
+	dev->hw_revision = cmd.u.cardinfo.hw_revision;
 
 	return 0;
 }
@@ -924,6 +962,34 @@ static int kvaser_usb_leaf_get_capabilities_leaf(struct kvaser_usb *dev)
 	return 0;
 }
 
+static int kvaser_usb_leaf_set_led(struct kvaser_usb_net_priv *priv,
+				   enum kvaser_usb_led_state state,
+				   u16 duration_ms)
+{
+	struct kvaser_usb *dev = priv->dev;
+	struct kvaser_cmd *cmd;
+	int ret;
+
+	cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
+	if (!cmd)
+		return -ENOMEM;
+
+	cmd->id = CMD_LED_ACTION_REQ;
+	cmd->len = CMD_HEADER_LEN + sizeof(struct kvaser_cmd_led_action_req);
+	cmd->u.led_action_req.tid = 0xff;
+
+	cmd->u.led_action_req.duration_ms = cpu_to_le16(duration_ms);
+	cmd->u.led_action_req.action = state |
+				       FIELD_PREP(KVASER_USB_LEAF_LED_IDX_MASK,
+						  KVASER_USB_LEAF_LED_YELLOW_CH0_IDX +
+						  priv->channel);
+
+	ret = kvaser_usb_send_cmd(dev, cmd, cmd->len);
+	kfree(cmd);
+
+	return ret;
+}
+
 static int kvaser_usb_leaf_get_capabilities(struct kvaser_usb *dev)
 {
 	int err = 0;
@@ -1638,6 +1704,8 @@ static void kvaser_usb_leaf_handle_command(struct kvaser_usb *dev,
 		if (dev->driver_info->family != KVASER_LEAF)
 			goto warn;
 		break;
+	case CMD_LED_ACTION_RESP:
+		break;
 
 	default:
 warn:		dev_warn(&dev->intf->dev, "Unhandled command (%d)\n", cmd->id);
@@ -1927,6 +1995,7 @@ const struct kvaser_usb_dev_ops kvaser_usb_leaf_dev_ops = {
 	.dev_get_software_details = NULL,
 	.dev_get_card_info = kvaser_usb_leaf_get_card_info,
 	.dev_get_capabilities = kvaser_usb_leaf_get_capabilities,
+	.dev_set_led = kvaser_usb_leaf_set_led,
 	.dev_set_opt_mode = kvaser_usb_leaf_set_opt_mode,
 	.dev_start_chip = kvaser_usb_leaf_start_chip,
 	.dev_stop_chip = kvaser_usb_leaf_stop_chip,
diff --git a/drivers/net/can/usb/peak_usb/pcan_usb_fd.c b/drivers/net/can/usb/peak_usb/pcan_usb_fd.c
index 4d85b29a17b7..ebefc274b50a 100644
--- a/drivers/net/can/usb/peak_usb/pcan_usb_fd.c
+++ b/drivers/net/can/usb/peak_usb/pcan_usb_fd.c
@@ -49,7 +49,7 @@ struct __packed pcan_ufd_fw_info {
 	__le32	ser_no;		/* S/N */
 	__le32	flags;		/* special functions */
 
-	/* extended data when type == PCAN_USBFD_TYPE_EXT */
+	/* extended data when type >= PCAN_USBFD_TYPE_EXT */
 	u8	cmd_out_ep;	/* ep for cmd */
 	u8	cmd_in_ep;	/* ep for replies */
 	u8	data_out_ep[2];	/* ep for CANx TX */
@@ -982,10 +982,11 @@ static int pcan_usb_fd_init(struct peak_usb_device *dev)
 			dev->can.ctrlmode |= CAN_CTRLMODE_FD_NON_ISO;
 		}
 
-		/* if vendor rsp is of type 2, then it contains EP numbers to
-		 * use for cmds pipes. If not, then default EP should be used.
+		/* if vendor rsp type is greater than or equal to 2, then it
+		 * contains EP numbers to use for cmds pipes. If not, then
+		 * default EP should be used.
 		 */
-		if (fw_info->type != cpu_to_le16(PCAN_USBFD_TYPE_EXT)) {
+		if (le16_to_cpu(fw_info->type) < PCAN_USBFD_TYPE_EXT) {
 			fw_info->cmd_out_ep = PCAN_USBPRO_EP_CMDOUT;
 			fw_info->cmd_in_ep = PCAN_USBPRO_EP_CMDIN;
 		}
@@ -1018,11 +1019,11 @@ static int pcan_usb_fd_init(struct peak_usb_device *dev)
 	dev->can_channel_id =
 		le32_to_cpu(pdev->usb_if->fw_info.dev_id[dev->ctrl_idx]);
 
-	/* if vendor rsp is of type 2, then it contains EP numbers to
-	 * use for data pipes. If not, then statically defined EP are used
-	 * (see peak_usb_create_dev()).
+	/* if vendor rsp type is greater than or equal to 2, then it contains EP
+	 * numbers to use for data pipes. If not, then statically defined EP are
+	 * used (see peak_usb_create_dev()).
 	 */
-	if (fw_info->type == cpu_to_le16(PCAN_USBFD_TYPE_EXT)) {
+	if (le16_to_cpu(fw_info->type) >= PCAN_USBFD_TYPE_EXT) {
 		dev->ep_msg_in = fw_info->data_in_ep;
 		dev->ep_msg_out = fw_info->data_out_ep[dev->ctrl_idx];
 	}