Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

Pull networking fixes from David Miller:

 1) Fix stack allocation in s390 BPF JIT, from Michael Holzheu.

 2) Disable LRO on openvswitch paths, from Jiri Benc.

 3) UDP early demux doesn't handle multicast group membership properly,
    fix from Shawn Bohrer.

 4) Fix TX queue hang due to incorrect handling of mixed sized fragments
    and linearlization in i40e driver, from Anjali Singhai Jain.

 5) Cannot use disable_irq() in timer handler of AMD xgbe driver, from
    Thomas Lendacky.

 6) b2net driver improperly assumes pci_alloc_consistent() gives zero'd
    out memory, use dma_zalloc_coherent().  From Sriharsha Basavapatna.

 7) Fix use-after-free in MPLS and ipv6, from Robert Shearman.

 8) Missing neif_napi_del() calls in cleanup paths of b44 driver, from
    Hauke Mehrtens.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
  net: replace last open coded skb_orphan_frags with function call
  net: bcmgenet: power on MII block for all MII modes
  ipv6: Fix protocol resubmission
  ipv6: fix possible use after free of dev stats
  b44: call netif_napi_del()
  bridge: disable softirqs around br_fdb_update to avoid lockup
  Revert "bridge: use _bh spinlock variant for br_fdb_update to avoid lockup"
  mpls: fix possible use after free of device
  be2net: Replace dma/pci_alloc_coherent() calls with dma_zalloc_coherent()
  bridge: use _bh spinlock variant for br_fdb_update to avoid lockup
  amd-xgbe: Use disable_irq_nosync from within timer function
  rhashtable: add missing import <linux/export.h>
  i40e: Make sure to be in VEB mode if SRIOV is enabled at probe
  i40e: start up in VEPA mode by default
  i40e/i40evf: Fix mixed size frags and linearization
  ipv4/udp: Verify multicast group is ours in upd_v4_early_demux()
  openvswitch: disable LRO
  s390/bpf: fix bpf frame pointer setup
  s390/bpf: fix stack allocation

1 files changed, 31 insertions, 4 deletions

diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index a54c14491e3b..5b5bea159bd5 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -6097,6 +6097,10 @@ static int i40e_reconstitute_veb(struct i40e_veb *veb)
 	if (ret)
 		goto end_reconstitute;
 
+	if (pf->flags & I40E_FLAG_VEB_MODE_ENABLED)
+		veb->bridge_mode = BRIDGE_MODE_VEB;
+	else
+		veb->bridge_mode = BRIDGE_MODE_VEPA;
 	i40e_config_bridge_mode(veb);
 
 	/* create the remaining VSIs attached to this VEB */
@@ -8031,7 +8035,12 @@ static int i40e_ndo_bridge_setlink(struct net_device *dev,
 		} else if (mode != veb->bridge_mode) {
 			/* Existing HW bridge but different mode needs reset */
 			veb->bridge_mode = mode;
-			i40e_do_reset(pf, (1 << __I40E_PF_RESET_REQUESTED));
+			/* TODO: If no VFs or VMDq VSIs, disallow VEB mode */
+			if (mode == BRIDGE_MODE_VEB)
+				pf->flags |= I40E_FLAG_VEB_MODE_ENABLED;
+			else
+				pf->flags &= ~I40E_FLAG_VEB_MODE_ENABLED;
+			i40e_do_reset(pf, BIT_ULL(__I40E_PF_RESET_REQUESTED));
 			break;
 		}
 	}
@@ -8343,11 +8352,12 @@ static int i40e_add_vsi(struct i40e_vsi *vsi)
 		ctxt.uplink_seid = vsi->uplink_seid;
 		ctxt.connection_type = I40E_AQ_VSI_CONN_TYPE_NORMAL;
 		ctxt.flags = I40E_AQ_VSI_TYPE_PF;
-		if (i40e_is_vsi_uplink_mode_veb(vsi)) {
+		if ((pf->flags & I40E_FLAG_VEB_MODE_ENABLED) &&
+		    (i40e_is_vsi_uplink_mode_veb(vsi))) {
 			ctxt.info.valid_sections |=
-				cpu_to_le16(I40E_AQ_VSI_PROP_SWITCH_VALID);
+			     cpu_to_le16(I40E_AQ_VSI_PROP_SWITCH_VALID);
 			ctxt.info.switch_id =
-				cpu_to_le16(I40E_AQ_VSI_SW_ID_FLAG_ALLOW_LB);
+			   cpu_to_le16(I40E_AQ_VSI_SW_ID_FLAG_ALLOW_LB);
 		}
 		i40e_vsi_setup_queue_map(vsi, &ctxt, enabled_tc, true);
 		break;
@@ -8746,6 +8756,14 @@ struct i40e_vsi *i40e_vsi_setup(struct i40e_pf *pf, u8 type,
 					 __func__);
 				return NULL;
 			}
+			/* We come up by default in VEPA mode if SRIOV is not
+			 * already enabled, in which case we can't force VEPA
+			 * mode.
+			 */
+			if (!(pf->flags & I40E_FLAG_VEB_MODE_ENABLED)) {
+				veb->bridge_mode = BRIDGE_MODE_VEPA;
+				pf->flags &= ~I40E_FLAG_VEB_MODE_ENABLED;
+			}
 			i40e_config_bridge_mode(veb);
 		}
 		for (i = 0; i < I40E_MAX_VEB && !veb; i++) {
@@ -9856,6 +9874,15 @@ static int i40e_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 		goto err_switch_setup;
 	}
 
+#ifdef CONFIG_PCI_IOV
+	/* prep for VF support */
+	if ((pf->flags & I40E_FLAG_SRIOV_ENABLED) &&
+	    (pf->flags & I40E_FLAG_MSIX_ENABLED) &&
+	    !test_bit(__I40E_BAD_EEPROM, &pf->state)) {
+		if (pci_num_vf(pdev))
+			pf->flags |= I40E_FLAG_VEB_MODE_ENABLED;
+	}
+#endif
 	err = i40e_setup_pf_switch(pf, false);
 	if (err) {
 		dev_info(&pdev->dev, "setup_pf_switch failed: %d\n", err);