net: phy: broadcom: Add support for Wake-on-LAN

Add support for WAKE_UCAST, WAKE_MCAST, WAKE_BCAST, WAKE_MAGIC and
WAKE_MAGICSECURE. This is only supported with the BCM54210E and
compatible Ethernet PHYs. Using the in-band interrupt or an out of band
GPIO interrupts are supported.

Broadcom PHYs will generate a Wake-on-LAN level low interrupt on LED4 as
soon as one of the supported patterns is being matched. That includes
generating such an interrupt even if the PHY is operated during normal
modes. If WAKE_UCAST is selected, this could lead to the LED4 interrupt
firing up for every packet being received which is absolutely
undesirable from a performance point of view.

Because the Wake-on-LAN configuration can be set long before the system
is actually put to sleep, we cannot have an interrupt service routine to
clear on read the interrupt status register and ensure that new packet
matches will be detected.

It is desirable to enable the Wake-on-LAN interrupt as late as possible
during the system suspend process such that we limit the number of
interrupts to be handled by the system, but also conversely feed into
the Linux's system suspend way of dealing with interrupts in and around
the points of no return.

Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 212 insertions, 0 deletions

diff --git a/drivers/net/phy/bcm-phy-lib.c b/drivers/net/phy/bcm-phy-lib.c
index b2c0baa51f39..27c57f6ab211 100644
--- a/drivers/net/phy/bcm-phy-lib.c
+++ b/drivers/net/phy/bcm-phy-lib.c
@@ -6,12 +6,14 @@
 #include "bcm-phy-lib.h"
 #include <linux/bitfield.h>
 #include <linux/brcmphy.h>
+#include <linux/etherdevice.h>
 #include <linux/export.h>
 #include <linux/mdio.h>
 #include <linux/module.h>
 #include <linux/phy.h>
 #include <linux/ethtool.h>
 #include <linux/ethtool_netlink.h>
+#include <linux/netdevice.h>
 
 #define MII_BCM_CHANNEL_WIDTH     0x2000
 #define BCM_CL45VEN_EEE_ADV       0x3c
@@ -816,6 +818,216 @@ int bcm_phy_cable_test_get_status_rdb(struct phy_device *phydev,
 }
 EXPORT_SYMBOL_GPL(bcm_phy_cable_test_get_status_rdb);
 
+#define BCM54XX_WOL_SUPPORTED_MASK	(WAKE_UCAST | \
+					 WAKE_MCAST | \
+					 WAKE_BCAST | \
+					 WAKE_MAGIC | \
+					 WAKE_MAGICSECURE)
+
+int bcm_phy_set_wol(struct phy_device *phydev, struct ethtool_wolinfo *wol)
+{
+	struct net_device *ndev = phydev->attached_dev;
+	u8 da[ETH_ALEN], mask[ETH_ALEN];
+	unsigned int i;
+	u16 ctl;
+	int ret;
+
+	/* Allow a MAC driver to play through its own Wake-on-LAN
+	 * implementation
+	 */
+	if (wol->wolopts & ~BCM54XX_WOL_SUPPORTED_MASK)
+		return -EOPNOTSUPP;
+
+	/* The PHY supports passwords of 4, 6 and 8 bytes in size, but Linux's
+	 * ethtool only supports 6, for now.
+	 */
+	BUILD_BUG_ON(sizeof(wol->sopass) != ETH_ALEN);
+
+	/* Clear previous interrupts */
+	ret = bcm_phy_read_exp(phydev, BCM54XX_WOL_INT_STATUS);
+	if (ret < 0)
+		return ret;
+
+	ret = bcm_phy_read_exp(phydev, BCM54XX_WOL_MAIN_CTL);
+	if (ret < 0)
+		return ret;
+
+	ctl = ret;
+
+	if (!wol->wolopts) {
+		if (phy_interrupt_is_valid(phydev))
+			disable_irq_wake(phydev->irq);
+
+		/* Leave all interrupts disabled */
+		ret = bcm_phy_write_exp(phydev, BCM54XX_WOL_INT_MASK,
+					BCM54XX_WOL_ALL_INTRS);
+		if (ret < 0)
+			return ret;
+
+		/* Disable the global Wake-on-LAN enable bit */
+		ctl &= ~BCM54XX_WOL_EN;
+
+		return bcm_phy_write_exp(phydev, BCM54XX_WOL_MAIN_CTL, ctl);
+	}
+
+	/* Clear the previously configured mode and mask mode for Wake-on-LAN */
+	ctl &= ~(BCM54XX_WOL_MODE_MASK << BCM54XX_WOL_MODE_SHIFT);
+	ctl &= ~(BCM54XX_WOL_MASK_MODE_MASK << BCM54XX_WOL_MASK_MODE_SHIFT);
+	ctl &= ~BCM54XX_WOL_DIR_PKT_EN;
+	ctl &= ~(BCM54XX_WOL_SECKEY_OPT_MASK << BCM54XX_WOL_SECKEY_OPT_SHIFT);
+
+	/* When using WAKE_MAGIC, we program the magic pattern filter to match
+	 * the device's MAC address and we accept any MAC DA in the Ethernet
+	 * frame.
+	 *
+	 * When using WAKE_UCAST, WAKE_BCAST or WAKE_MCAST, we program the
+	 * following:
+	 * - WAKE_UCAST -> MAC DA is the device's MAC with a perfect match
+	 * - WAKE_MCAST -> MAC DA is X1:XX:XX:XX:XX:XX where XX is don't care
+	 * - WAKE_BCAST -> MAC DA is FF:FF:FF:FF:FF:FF with a perfect match
+	 *
+	 * Note that the Broadcast MAC DA is inherently going to match the
+	 * multicast pattern being matched.
+	 */
+	memset(mask, 0, sizeof(mask));
+
+	if (wol->wolopts & WAKE_MCAST) {
+		memset(da, 0, sizeof(da));
+		memset(mask, 0xff, sizeof(mask));
+		da[0] = 0x01;
+		mask[0] = ~da[0];
+	} else {
+		if (wol->wolopts & WAKE_UCAST) {
+			ether_addr_copy(da, ndev->dev_addr);
+		} else if (wol->wolopts & WAKE_BCAST) {
+			eth_broadcast_addr(da);
+		} else if (wol->wolopts & WAKE_MAGICSECURE) {
+			ether_addr_copy(da, wol->sopass);
+		} else if (wol->wolopts & WAKE_MAGIC) {
+			memset(da, 0, sizeof(da));
+			memset(mask, 0xff, sizeof(mask));
+		}
+	}
+
+	for (i = 0; i < ETH_ALEN / 2; i++) {
+		if (wol->wolopts & (WAKE_MAGIC | WAKE_MAGICSECURE)) {
+			ret = bcm_phy_write_exp(phydev,
+						BCM54XX_WOL_MPD_DATA1(2 - i),
+						ndev->dev_addr[i * 2] << 8 |
+						ndev->dev_addr[i * 2 + 1]);
+			if (ret < 0)
+				return ret;
+		}
+
+		ret = bcm_phy_write_exp(phydev, BCM54XX_WOL_MPD_DATA2(2 - i),
+					da[i * 2] << 8 | da[i * 2 + 1]);
+		if (ret < 0)
+			return ret;
+
+		ret = bcm_phy_write_exp(phydev, BCM54XX_WOL_MASK(2 - i),
+					mask[i * 2] << 8 | mask[i * 2 + 1]);
+		if (ret)
+			return ret;
+	}
+
+	if (wol->wolopts & WAKE_MAGICSECURE) {
+		ctl |= BCM54XX_WOL_SECKEY_OPT_6B <<
+		       BCM54XX_WOL_SECKEY_OPT_SHIFT;
+		ctl |= BCM54XX_WOL_MODE_SINGLE_MPDSEC << BCM54XX_WOL_MODE_SHIFT;
+		ctl |= BCM54XX_WOL_MASK_MODE_DA_FF <<
+		       BCM54XX_WOL_MASK_MODE_SHIFT;
+	} else {
+		if (wol->wolopts & WAKE_MAGIC)
+			ctl |= BCM54XX_WOL_MODE_SINGLE_MPD;
+		else
+			ctl |= BCM54XX_WOL_DIR_PKT_EN;
+		ctl |= BCM54XX_WOL_MASK_MODE_DA_ONLY <<
+		       BCM54XX_WOL_MASK_MODE_SHIFT;
+	}
+
+	/* Globally enable Wake-on-LAN */
+	ctl |= BCM54XX_WOL_EN | BCM54XX_WOL_CRC_CHK;
+
+	ret = bcm_phy_write_exp(phydev, BCM54XX_WOL_MAIN_CTL, ctl);
+	if (ret < 0)
+		return ret;
+
+	/* Enable WOL interrupt on LED4 */
+	ret = bcm_phy_read_exp(phydev, BCM54XX_TOP_MISC_LED_CTL);
+	if (ret < 0)
+		return ret;
+
+	ret |= BCM54XX_LED4_SEL_INTR;
+	ret = bcm_phy_write_exp(phydev, BCM54XX_TOP_MISC_LED_CTL, ret);
+	if (ret < 0)
+		return ret;
+
+	/* Enable all Wake-on-LAN interrupt sources */
+	ret = bcm_phy_write_exp(phydev, BCM54XX_WOL_INT_MASK, 0);
+	if (ret < 0)
+		return ret;
+
+	if (phy_interrupt_is_valid(phydev))
+		enable_irq_wake(phydev->irq);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(bcm_phy_set_wol);
+
+void bcm_phy_get_wol(struct phy_device *phydev, struct ethtool_wolinfo *wol)
+{
+	struct net_device *ndev = phydev->attached_dev;
+	u8 da[ETH_ALEN];
+	unsigned int i;
+	int ret;
+	u16 ctl;
+
+	wol->supported = BCM54XX_WOL_SUPPORTED_MASK;
+	wol->wolopts = 0;
+
+	ret = bcm_phy_read_exp(phydev, BCM54XX_WOL_MAIN_CTL);
+	if (ret < 0)
+		return;
+
+	ctl = ret;
+
+	if (!(ctl & BCM54XX_WOL_EN))
+		return;
+
+	for (i = 0; i < sizeof(da) / 2; i++) {
+		ret = bcm_phy_read_exp(phydev,
+				       BCM54XX_WOL_MPD_DATA2(2 - i));
+		if (ret < 0)
+			return;
+
+		da[i * 2] = ret >> 8;
+		da[i * 2 + 1] = ret & 0xff;
+	}
+
+	if (ctl & BCM54XX_WOL_DIR_PKT_EN) {
+		if (is_broadcast_ether_addr(da))
+			wol->wolopts |= WAKE_BCAST;
+		else if (is_multicast_ether_addr(da))
+			wol->wolopts |= WAKE_MCAST;
+		else if (ether_addr_equal(da, ndev->dev_addr))
+			wol->wolopts |= WAKE_UCAST;
+	} else {
+		ctl = (ctl >> BCM54XX_WOL_MODE_SHIFT) & BCM54XX_WOL_MODE_MASK;
+		switch (ctl) {
+		case BCM54XX_WOL_MODE_SINGLE_MPD:
+			wol->wolopts |= WAKE_MAGIC;
+			break;
+		case BCM54XX_WOL_MODE_SINGLE_MPDSEC:
+			wol->wolopts |= WAKE_MAGICSECURE;
+			memcpy(wol->sopass, da, sizeof(da));
+			break;
+		default:
+			break;
+		}
+	}
+}
+EXPORT_SYMBOL_GPL(bcm_phy_get_wol);
+
 MODULE_DESCRIPTION("Broadcom PHY Library");
 MODULE_LICENSE("GPL v2");
 MODULE_AUTHOR("Broadcom Corporation");