Merge tag 'net-next-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
 "Core & protocols:

   - Wrap datapath globals into net_aligned_data, to avoid false sharing

   - Preserve MSG_ZEROCOPY in forwarding (e.g. out of a container)

   - Add SO_INQ and SCM_INQ support to AF_UNIX

   - Add SIOCINQ support to AF_VSOCK

   - Add TCP_MAXSEG sockopt to MPTCP

   - Add IPv6 force_forwarding sysctl to enable forwarding per interface

   - Make TCP validation of whether packet fully fits in the receive
     window and the rcv_buf more strict. With increased use of HW
     aggregation a single "packet" can be multiple 100s of kB

   - Add MSG_MORE flag to optimize large TCP transmissions via sockmap,
     improves latency up to 33% for sockmap users

   - Convert TCP send queue handling from tasklet to BH workque

   - Improve BPF iteration over TCP sockets to see each socket exactly
     once

   - Remove obsolete and unused TCP RFC3517/RFC6675 loss recovery code

   - Support enabling kernel threads for NAPI processing on per-NAPI
     instance basis rather than a whole device. Fully stop the kernel
     NAPI thread when threaded NAPI gets disabled. Previously thread
     would stick around until ifdown due to tricky synchronization

   - Allow multicast routing to take effect on locally-generated packets

   - Add output interface argument for End.X in segment routing

   - MCTP: add support for gateway routing, improve bind() handling

   - Don't require rtnl_lock when fetching an IPv6 neighbor over Netlink

   - Add a new neighbor flag ("extern_valid"), which cedes refresh
     responsibilities to userspace. This is needed for EVPN multi-homing
     where a neighbor entry for a multi-homed host needs to be synced
     across all the VTEPs among which the host is multi-homed

   - Support NUD_PERMANENT for proxy neighbor entries

   - Add a new queuing discipline for IETF RFC9332 DualQ Coupled AQM

   - Add sequence numbers to netconsole messages. Unregister
     netconsole's console when all net targets are removed. Code
     refactoring. Add a number of selftests

   - Align IPSec inbound SA lookup to RFC 4301. Only SPI and protocol
     should be used for an inbound SA lookup

   - Support inspecting ref_tracker state via DebugFS

   - Don't force bonding advertisement frames tx to ~333 ms boundaries.
     Add broadcast_neighbor option to send ARP/ND on all bonded links

   - Allow providing upcall pid for the 'execute' command in openvswitch

   - Remove DCCP support from Netfilter's conntrack

   - Disallow multiple packet duplications in the queuing layer

   - Prevent use of deprecated iptables code on PREEMPT_RT

  Driver API:

   - Support RSS and hashing configuration over ethtool Netlink

   - Add dedicated ethtool callbacks for getting and setting hashing
     fields

   - Add support for power budget evaluation strategy in PSE /
     Power-over-Ethernet. Generate Netlink events for overcurrent etc

   - Support DPLL phase offset monitoring across all device inputs.
     Support providing clock reference and SYNC over separate DPLL
     inputs

   - Support traffic classes in devlink rate API for bandwidth
     management

   - Remove rtnl_lock dependency from UDP tunnel port configuration

  Device drivers:

   - Add a new Broadcom driver for 800G Ethernet (bnge)

   - Add a standalone driver for Microchip ZL3073x DPLL

   - Remove IBM's NETIUCV device driver

   - Ethernet high-speed NICs:
      - Broadcom (bnxt):
         - support zero-copy Tx of DMABUF memory
         - take page size into account for page pool recycling rings
      - Intel (100G, ice, idpf):
         - idpf: XDP and AF_XDP support preparations
         - idpf: add flow steering
         - add link_down_events statistic
         - clean up the TSPLL code
         - preparations for live VM migration
      - nVidia/Mellanox:
         - support zero-copy Rx/Tx interfaces (DMABUF and io_uring)
         - optimize context memory usage for matchers
         - expose serial numbers in devlink info
         - support PCIe congestion metrics
      - Meta (fbnic):
         - add 25G, 50G, and 100G link modes to phylink
         - support dumping FW logs
      - Marvell/Cavium:
         - support for CN20K generation of the Octeon chips
      - Amazon:
         - add HW clock (without timestamping, just hypervisor time access)

   - Ethernet virtual:
      - VirtIO net:
         - support segmentation of UDP-tunnel-encapsulated packets
      - Google (gve):
         - support packet timestamping and clock synchronization
      - Microsoft vNIC:
         - add handler for device-originated servicing events
         - allow dynamic MSI-X vector allocation
         - support Tx bandwidth clamping

   - Ethernet NICs consumer, and embedded:
      - AMD:
         - amd-xgbe: hardware timestamping and PTP clock support
      - Broadcom integrated MACs (bcmgenet, bcmasp):
         - use napi_complete_done() return value to support NAPI polling
         - add support for re-starting auto-negotiation
      - Broadcom switches (b53):
         - support BCM5325 switches
         - add bcm63xx EPHY power control
      - Synopsys (stmmac):
         - lots of code refactoring and cleanups
      - TI:
         - icssg-prueth: read firmware-names from device tree
         - icssg: PRP offload support
      - Microchip:
         - lan78xx: convert to PHYLINK for improved PHY and MAC management
         - ksz: add KSZ8463 switch support
      - Intel:
         - support similar queue priority scheme in multi-queue and
           time-sensitive networking (taprio)
         - support packet pre-emption in both
      - RealTek (r8169):
         - enable EEE at 5Gbps on RTL8126
      - Airoha:
         - add PPPoE offload support
         - MDIO bus controller for Airoha AN7583

   - Ethernet PHYs:
      - support for the IPQ5018 internal GE PHY
      - micrel KSZ9477 switch-integrated PHYs:
         - add MDI/MDI-X control support
         - add RX error counters
         - add cable test support
         - add Signal Quality Indicator (SQI) reporting
      - dp83tg720: improve reset handling and reduce link recovery time
      - support bcm54811 (and its MII-Lite interface type)
      - air_en8811h: support resume/suspend
      - support PHY counters for QCA807x and QCA808x
      - support WoL for QCA807x

   - CAN drivers:
      - rcar_canfd: support for Transceiver Delay Compensation
      - kvaser: report FW versions via devlink dev info

   - WiFi:
      - extended regulatory info support (6 GHz)
      - add statistics and beacon monitor for Multi-Link Operation (MLO)
      - support S1G aggregation, improve S1G support
      - add Radio Measurement action fields
      - support per-radio RTS threshold
      - some work around how FIPS affects wifi, which was wrong (RC4 is
        used by TKIP, not only WEP)
      - improvements for unsolicited probe response handling

   - WiFi drivers:
      - RealTek (rtw88):
         - IBSS mode for SDIO devices
      - RealTek (rtw89):
         - BT coexistence for MLO/WiFi7
         - concurrent station + P2P support
         - support for USB devices RTL8851BU/RTL8852BU
      - Intel (iwlwifi):
         - use embedded PNVM in (to be released) FW images to fix
           compatibility issues
         - many cleanups (unused FW APIs, PCIe code, WoWLAN)
         - some FIPS interoperability
      - MediaTek (mt76):
         - firmware recovery improvements
         - more MLO work
      - Qualcomm/Atheros (ath12k):
         - fix scan on multi-radio devices
         - more EHT/Wi-Fi 7 features
         - encapsulation/decapsulation offload
      - Broadcom (brcm80211):
         - support SDIO 43751 device

   - Bluetooth:
      - hci_event: add support for handling LE BIG Sync Lost event
      - ISO: add socket option to report packet seqnum via CMSG
      - ISO: support SCM_TIMESTAMPING for ISO TS

   - Bluetooth drivers:
      - intel_pcie: support Function Level Reset
      - nxpuart: add support for 4M baudrate
      - nxpuart: implement powerup sequence, reset, FW dump, and FW loading"

* tag 'net-next-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1742 commits)
  dpll: zl3073x: Fix build failure
  selftests: bpf: fix legacy netfilter options
  ipv6: annotate data-races around rt->fib6_nsiblings
  ipv6: fix possible infinite loop in fib6_info_uses_dev()
  ipv6: prevent infinite loop in rt6_nlmsg_size()
  ipv6: add a retry logic in net6_rt_notify()
  vrf: Drop existing dst reference in vrf_ip6_input_dst
  net/sched: taprio: align entry index attr validation with mqprio
  net: fsl_pq_mdio: use dev_err_probe
  selftests: rtnetlink.sh: remove esp4_offload after test
  vsock: remove unnecessary null check in vsock_getname()
  igb: xsk: solve negative overflow of nb_pkts in zerocopy mode
  stmmac: xsk: fix negative overflow of budget in zerocopy mode
  dt-bindings: ieee802154: Convert at86rf230.txt yaml format
  net: dsa: microchip: Disable PTP function of KSZ8463
  net: dsa: microchip: Setup fiber ports for KSZ8463
  net: dsa: microchip: Write switch MAC address differently for KSZ8463
  net: dsa: microchip: Use different registers for KSZ8463
  net: dsa: microchip: Add KSZ8463 switch support to KSZ DSA driver
  dt-bindings: net: dsa: microchip: Add KSZ8463 switch support
  ...

1 files changed, 48 insertions, 23 deletions

diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
index b94c3619526c..8af402555b5e 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
@@ -1043,6 +1043,21 @@ void brcmf_set_mpc(struct brcmf_if *ifp, int mpc)
 	}
 }
 
+bool brcmf_is_apmode_operating(struct wiphy *wiphy)
+{
+	struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy);
+	struct brcmf_cfg80211_vif *vif;
+	bool ret = false;
+
+	list_for_each_entry(vif, &cfg->vif_list, list) {
+		if (brcmf_is_apmode(vif) &&
+		    test_bit(BRCMF_VIF_STATUS_AP_CREATED, &vif->sme_state))
+			ret = true;
+	}
+
+	return ret;
+}
+
 static void brcmf_scan_params_v2_to_v1(struct brcmf_scan_params_v2_le *params_v2_le,
 				       struct brcmf_scan_params_le *params_le)
 {
@@ -1544,10 +1559,6 @@ brcmf_cfg80211_scan(struct wiphy *wiphy, struct cfg80211_scan_request *request)
 		return -EAGAIN;
 	}
 
-	/* If scan req comes for p2p0, send it over primary I/F */
-	if (vif == cfg->p2p.bss_idx[P2PAPI_BSSCFG_DEVICE].vif)
-		vif = cfg->p2p.bss_idx[P2PAPI_BSSCFG_PRIMARY].vif;
-
 	brcmf_dbg(SCAN, "START ESCAN\n");
 
 	cfg->scan_request = request;
@@ -1563,6 +1574,10 @@ brcmf_cfg80211_scan(struct wiphy *wiphy, struct cfg80211_scan_request *request)
 	if (err)
 		goto scan_out;
 
+	/* If scan req comes for p2p0, send it over primary I/F */
+	if (vif == cfg->p2p.bss_idx[P2PAPI_BSSCFG_DEVICE].vif)
+		vif = cfg->p2p.bss_idx[P2PAPI_BSSCFG_PRIMARY].vif;
+
 	err = brcmf_do_escan(vif->ifp, request);
 	if (err)
 		goto scan_out;
@@ -1622,7 +1637,8 @@ static s32 brcmf_set_retry(struct net_device *ndev, u32 retry, bool l)
 	return err;
 }
 
-static s32 brcmf_cfg80211_set_wiphy_params(struct wiphy *wiphy, u32 changed)
+static s32 brcmf_cfg80211_set_wiphy_params(struct wiphy *wiphy, int radio_idx,
+					   u32 changed)
 {
 	struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy);
 	struct net_device *ndev = cfg_to_ndev(cfg);
@@ -2630,7 +2646,8 @@ brcmf_cfg80211_disconnect(struct wiphy *wiphy, struct net_device *ndev,
 
 static s32
 brcmf_cfg80211_set_tx_power(struct wiphy *wiphy, struct wireless_dev *wdev,
-			    enum nl80211_tx_power_setting type, s32 mbm)
+			    int radio_idx, enum nl80211_tx_power_setting type,
+			    s32 mbm)
 {
 	struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy);
 	struct net_device *ndev = cfg_to_ndev(cfg);
@@ -2681,7 +2698,7 @@ done:
 
 static s32
 brcmf_cfg80211_get_tx_power(struct wiphy *wiphy, struct wireless_dev *wdev,
-			    unsigned int link_id, s32 *dbm)
+			    int radio_idx, unsigned int link_id, s32 *dbm)
 {
 	struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy);
 	struct brcmf_cfg80211_vif *vif = wdev_to_vif(wdev);
@@ -3861,7 +3878,7 @@ brcmf_notify_sched_scan_results(struct brcmf_if *ifp,
 	brcmf_dbg(SCAN, "Enter\n");
 
 	if (e->datalen < (sizeof(*pfn_result) + sizeof(*netinfo))) {
-		brcmf_dbg(SCAN, "Event data to small. Ignore\n");
+		brcmf_dbg(SCAN, "Event data too small. Ignore\n");
 		return 0;
 	}
 
@@ -4029,7 +4046,7 @@ brcmf_wowl_nd_results(struct brcmf_if *ifp, const struct brcmf_event_msg *e,
 	brcmf_dbg(SCAN, "Enter\n");
 
 	if (e->datalen < (sizeof(*pfn_result) + sizeof(*netinfo))) {
-		brcmf_dbg(SCAN, "Event data to small. Ignore\n");
+		brcmf_dbg(SCAN, "Event data too small. Ignore\n");
 		return 0;
 	}
 
@@ -4291,7 +4308,7 @@ static s32 brcmf_cfg80211_suspend(struct wiphy *wiphy,
 		brcmf_set_mpc(ifp, 1);
 
 	} else {
-		/* Configure WOWL paramaters */
+		/* Configure WOWL parameters */
 		brcmf_configure_wowl(cfg, ifp, wowl);
 
 		/* Prevent disassociation due to inactivity with keep-alive */
@@ -5416,8 +5433,8 @@ static int brcmf_cfg80211_stop_ap(struct wiphy *wiphy, struct net_device *ndev,
 			bphy_err(drvr, "bss_enable config failed %d\n", err);
 	}
 	brcmf_set_mpc(ifp, 1);
-	brcmf_configure_arp_nd_offload(ifp, true);
 	clear_bit(BRCMF_VIF_STATUS_AP_CREATED, &ifp->vif->sme_state);
+	brcmf_configure_arp_nd_offload(ifp, true);
 	brcmf_net_setcarrier(ifp, false);
 
 	return err;
@@ -5527,8 +5544,7 @@ brcmf_cfg80211_mgmt_tx(struct wiphy *wiphy, struct wireless_dev *wdev,
 	struct brcmf_fil_action_frame_le *action_frame;
 	struct brcmf_fil_af_params_le *af_params;
 	bool ack;
-	s32 chan_nr;
-	u32 freq;
+	__le32 hw_ch;
 
 	brcmf_dbg(TRACE, "Enter\n");
 
@@ -5589,25 +5605,34 @@ brcmf_cfg80211_mgmt_tx(struct wiphy *wiphy, struct wireless_dev *wdev,
 		/* Add the channel. Use the one specified as parameter if any or
 		 * the current one (got from the firmware) otherwise
 		 */
-		if (chan)
-			freq = chan->center_freq;
-		else
-			brcmf_fil_cmd_int_get(vif->ifp, BRCMF_C_GET_CHANNEL,
-					      &freq);
-		chan_nr = ieee80211_frequency_to_channel(freq);
-		af_params->channel = cpu_to_le32(chan_nr);
+		if (chan) {
+			hw_ch = cpu_to_le32(chan->hw_value);
+		} else {
+			err = brcmf_fil_cmd_data_get(vif->ifp,
+						     BRCMF_C_GET_CHANNEL,
+						     &hw_ch, sizeof(hw_ch));
+			if (err) {
+				bphy_err(drvr,
+					 "unable to get current hw channel\n");
+				goto free;
+			}
+		}
+		af_params->channel = hw_ch;
+
 		af_params->dwell_time = cpu_to_le32(params->wait);
 		memcpy(action_frame->data, &buf[DOT11_MGMT_HDR_LEN],
 		       le16_to_cpu(action_frame->len));
 
-		brcmf_dbg(TRACE, "Action frame, cookie=%lld, len=%d, freq=%d\n",
-			  *cookie, le16_to_cpu(action_frame->len), freq);
+		brcmf_dbg(TRACE, "Action frame, cookie=%lld, len=%d, channel=%d\n",
+			  *cookie, le16_to_cpu(action_frame->len),
+			  le32_to_cpu(af_params->channel));
 
 		ack = brcmf_p2p_send_action_frame(cfg, cfg_to_ndev(cfg),
 						  af_params);
 
 		cfg80211_mgmt_tx_status(wdev, *cookie, buf, len, ack,
 					GFP_KERNEL);
+free:
 		kfree(af_params);
 	} else {
 		brcmf_dbg(TRACE, "Unhandled, fc=%04x!!\n", mgmt->frame_control);
@@ -8313,7 +8338,7 @@ struct brcmf_cfg80211_info *brcmf_cfg80211_attach(struct brcmf_pub *drvr,
 	cfg->d11inf.io_type = (u8)io_type;
 	brcmu_d11_attach(&cfg->d11inf);
 
-	/* regulatory notifer below needs access to cfg so
+	/* regulatory notifier below needs access to cfg so
 	 * assign it now.
 	 */
 	drvr->config = cfg;