Merge tag 'pci-v6.19-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci

Pull PCI updates from Bjorn Helgaas:
 "Enumeration:

   - Enable host bridge emulation for PCI_DOMAINS_GENERIC platforms (Dan
     Williams)

   - Switch vmd from custom domain number allocator to the common
     allocator to prevent a potential race with new non-VMD buses (Dan
     Williams)

   - Enable Precision Time Measurement (PTM) only if device advertises
     support for a relevant role, to prevent invalid PTM Requests that
     cause ACS violations that are reported as AER Uncorrectable
     Non-Fatal errors (Mika Westerberg)

  Resource management:

   - Prevent resource tree corruption when BAR resize fails (Ilpo
     Järvinen)

   - Restore BARs to the original size if a BAR resize fails (Ilpo
     Järvinen)

   - Remove BAR release from BAR resize attempts by the xe, i915, and
     amdgpu drivers so the PCI core can restore BARs if the resize fails
     (Ilpo Järvinen)

   - Move Resizable BAR code to rebar.c (Ilpo Järvinen)

   - Add pci_rebar_size_supported() and use it in i915 and xe (Ilpo
     Järvinen)

   - Add pci_rebar_get_max_size() and use it in xe and amdgpu (Ilpo
     Järvinen)

  Power management and error handling:

   - For drivers using PCI legacy suspend, save config state at suspend
     so that state (not any earlier state from enumeration, probe, or
     error recovery) will be restored when resuming (Lukas Wunner)

   - For devices with no driver or a driver that lacks power management,
     save config state at hibernate so that state (not any earlier state
     from enumeration, probe, or error recovery) will be restored when
     resuming (Lukas Wunner)

   - Save device config space on device addition, before driver binding,
     so error recovery works more reliably (Lukas Wunner)

   - Drop pci_save_state() from several drivers that no longer need it
     since the PCI core always does it and pci_restore_state() no longer
     invalidates the saved state (Lukas Wunner)

   - Document use of pci_save_state() by drivers to capture the state
     they want restored during error recovery (Lukas Wunner)

  Power control:

   - Add a struct pci_ops.assert_perst() function pointer to
     assert/deassert PCIe PERST# and implement it for the qcom driver
     (Krishna Chaitanya Chundru)

   - Add DT binding and pwrctrl driver for the Toshiba TC9563 PCIe
     switch, which must be held in reset after poweron so the pwrctrl
     driver can configure the switch via I2C before bringing up the
     links (Krishna Chaitanya Chundru)

  Endpoint framework:

   - Convert the endpoint doorbell test to use a threaded IRQ to fix a
     'sleeping while atomic' issue (Bhanu Seshu Kumar Valluri)

   - Add endpoint VNTB MSI doorbell support to reduce latency between
     host and endpoint (Frank Li)

  New native PCIe controller drivers:

   - Add CIX Sky1 host controller DT binding and driver (Hans Zhang)

   - Add NXP S32G host controller DT binding and driver (Vincent
     Guittot)

   - Add Renesas RZ/G3S host controller DT binding and driver (Claudiu
     Beznea)

   - Add SpacemiT K1 host controller DT binding and driver (Alex Elder)

  Amlogic Meson PCIe controller driver:

   - Update DT binding to name DBI region 'dbi', not 'elbi', and update
     driver to support both (Manivannan Sadhasivam)

  Apple PCIe controller driver:

   - Move struct pci_host_bridge allocation from pci_host_common_init()
     to callers, which significantly simplifies pcie-apple (Marc
     Zyngier)

  Broadcom STB PCIe controller driver:

   - Disable advertising ASPM L0s support correctly (Jim Quinlan)

   - Add a panic/die handler to print diagnostic info in case PCIe
     caused an unrecoverable abort (Jim Quinlan)

  Cadence PCIe controller driver:

   - Add module support for Cadence platform host and endpoint
     controller driver (Manikandan K Pillai)

   - Split headers into 'legacy' (LGA) and 'high perf' (HPA) to prepare
     for new CIX Sky1 driver (Manikandan K Pillai)

  MediaTek PCIe controller driver:

   - Convert DT binding to YAML schema (Christian Marangi)

   - Add Airoha AN7583 DT compatible and driver support (Christian
     Marangi)

  Qualcomm PCIe controller driver:

   - Add Qualcomm Kaanapali to SM8550 DT binding (Qiang Yu)

   - Add required 'power-domains' and 'resets' to qcom sa8775p, sc7280,
     sc8280xp, sm8150, sm8250, sm8350, sm8450, sm8550, x1e80100 DT
     schemas (Krzysztof Kozlowski)

   - Look up OPP using both frequency and data rate (not just frequency)
     so RPMh votes can account for both (Krishna Chaitanya Chundru)

  Rockchip DesignWare PCIe controller driver:

   - Add Rockchip RK3528 compatible strings in DT binding (Yao Zi)

  STMicroelectronics STM32MP25 PCIe controller driver:

   - Fix a race between link training and endpoint register
     initialization (Christian Bruel)

   - Align endpoint allocations to match the ATU requirements (Christian
     Bruel)

  Synopsys DesignWare PCIe controller driver:

   - Clear L1 PM Substate Capability 'Supported' bits unless glue driver
     says it's supported, which prevents users from enabling non-working
     L1SS. Currently only qcom and tegra194 support L1SS (Bjorn Helgaas)

   - Remove now-superfluous L1SS disable code from tegra194 (Bjorn
     Helgaas)

   - Configure L1SS support in dw-rockchip when DT says
     'supports-clkreq' (Shawn Lin)

  TI Keystone PCIe controller driver:

   - Fail the probe instead of silently succeeding if ks_pcie_of_data
     didn't specify Root Complex or Endpoint mode (Siddharth Vadapalli)

   - Make keystone buildable as a loadable module, except on ARM32 where
     hook_fault_code() is __init (Siddharth Vadapalli)"

* tag 'pci-v6.19-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (100 commits)
  MAINTAINERS: Add Manivannan Sadhasivam as PCI/pwrctrl maintainer
  MAINTAINERS: Add CIX Sky1 PCIe controller driver maintainer
  PCI: sky1: Add PCIe host support for CIX Sky1
  dt-bindings: PCI: Add CIX Sky1 PCIe Root Complex bindings
  PCI: cadence: Add support for High Perf Architecture (HPA) controller
  MAINTAINERS: Add NXP S32G PCIe controller driver maintainer
  PCI: s32g: Add NXP S32G PCIe controller driver (RC)
  PCI: dwc: Add register and bitfield definitions
  dt-bindings: PCI: s32g: Add NXP S32G PCIe controller
  PCI: Add Renesas RZ/G3S host controller driver
  PCI: host-generic: Move bridge allocation outside of pci_host_common_init()
  dt-bindings: PCI: Add Renesas RZ/G3S PCIe controller binding
  PCI: Validate pci_rebar_size_supported() input
  Documentation: PCI: Amend error recovery doc with pci_save_state() rules
  treewide: Drop pci_save_state() after pci_restore_state()
  PCI/ERR: Ensure error recoverability at all times
  PCI/PM: Stop needlessly clearing state_saved on enumeration and thaw
  PCI/PM: Reinstate clearing state_saved in legacy and !PM codepaths
  PCI: dw-rockchip: Configure L1SS support
  PCI: tegra194: Remove unnecessary L1SS disable code
  ...

1 files changed, 20 insertions, 1 deletions

diff --git a/drivers/pci/controller/dwc/pcie-designware.h b/drivers/pci/controller/dwc/pcie-designware.h
index e995f692a1ec..31685951a080 100644
--- a/drivers/pci/controller/dwc/pcie-designware.h
+++ b/drivers/pci/controller/dwc/pcie-designware.h
@@ -97,7 +97,7 @@
 #define PORT_LANE_SKEW_INSERT_MASK	GENMASK(23, 0)
 
 #define PCIE_PORT_DEBUG0		0x728
-#define PORT_LOGIC_LTSSM_STATE_MASK	0x1f
+#define PORT_LOGIC_LTSSM_STATE_MASK	0x3f
 #define PORT_LOGIC_LTSSM_STATE_L0	0x11
 #define PCIE_PORT_DEBUG1		0x72C
 #define PCIE_PORT_DEBUG1_LINK_UP		BIT(4)
@@ -121,6 +121,7 @@
 
 #define GEN3_RELATED_OFF			0x890
 #define GEN3_RELATED_OFF_GEN3_ZRXDC_NONCOMPL	BIT(0)
+#define GEN3_RELATED_OFF_EQ_PHASE_2_3		BIT(9)
 #define GEN3_RELATED_OFF_RXEQ_RGRDLESS_RXTS	BIT(13)
 #define GEN3_RELATED_OFF_GEN3_EQ_DISABLE	BIT(16)
 #define GEN3_RELATED_OFF_RATE_SHADOW_SEL_SHIFT	24
@@ -138,6 +139,13 @@
 #define GEN3_EQ_FMDC_MAX_PRE_CURSOR_DELTA	GENMASK(13, 10)
 #define GEN3_EQ_FMDC_MAX_POST_CURSOR_DELTA	GENMASK(17, 14)
 
+#define COHERENCY_CONTROL_1_OFF			0x8E0
+#define CFG_MEMTYPE_BOUNDARY_LOW_ADDR_MASK	GENMASK(31, 2)
+#define CFG_MEMTYPE_VALUE			BIT(0)
+
+#define COHERENCY_CONTROL_2_OFF			0x8E4
+#define COHERENCY_CONTROL_3_OFF			0x8E8
+
 #define PCIE_PORT_MULTI_LANE_CTRL	0x8C0
 #define PORT_MLTI_UPCFG_SUPPORT		BIT(7)
 
@@ -485,6 +493,7 @@ struct dw_pcie_ops {
 	enum dw_pcie_ltssm (*get_ltssm)(struct dw_pcie *pcie);
 	int	(*start_link)(struct dw_pcie *pcie);
 	void	(*stop_link)(struct dw_pcie *pcie);
+	int	(*assert_perst)(struct dw_pcie *pcie, bool assert);
 };
 
 struct debugfs_info {
@@ -516,6 +525,7 @@ struct dw_pcie {
 	int			max_link_speed;
 	u8			n_fts[2];
 	struct dw_edma_chip	edma;
+	bool			l1ss_support;	/* L1 PM Substates support */
 	struct clk_bulk_data	app_clks[DW_PCIE_NUM_APP_CLKS];
 	struct clk_bulk_data	core_clks[DW_PCIE_NUM_CORE_CLKS];
 	struct reset_control_bulk_data	app_rsts[DW_PCIE_NUM_APP_RSTS];
@@ -573,6 +583,7 @@ int dw_pcie_prog_ep_inbound_atu(struct dw_pcie *pci, u8 func_no, int index,
 				int type, u64 parent_bus_addr,
 				u8 bar, size_t size);
 void dw_pcie_disable_atu(struct dw_pcie *pci, u32 dir, int index);
+void dw_pcie_hide_unsupported_l1ss(struct dw_pcie *pci);
 void dw_pcie_setup(struct dw_pcie *pci);
 void dw_pcie_iatu_detect(struct dw_pcie *pci);
 int dw_pcie_edma_detect(struct dw_pcie *pci);
@@ -787,6 +798,14 @@ static inline void dw_pcie_stop_link(struct dw_pcie *pci)
 		pci->ops->stop_link(pci);
 }
 
+static inline int dw_pcie_assert_perst(struct dw_pcie *pci, bool assert)
+{
+	if (pci->ops && pci->ops->assert_perst)
+		return pci->ops->assert_perst(pci, assert);
+
+	return 0;
+}
+
 static inline enum dw_pcie_ltssm dw_pcie_get_ltssm(struct dw_pcie *pci)
 {
 	u32 val;