Merge tag 'pci-v6.19-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci

Pull PCI updates from Bjorn Helgaas:
 "Enumeration:

   - Enable host bridge emulation for PCI_DOMAINS_GENERIC platforms (Dan
     Williams)

   - Switch vmd from custom domain number allocator to the common
     allocator to prevent a potential race with new non-VMD buses (Dan
     Williams)

   - Enable Precision Time Measurement (PTM) only if device advertises
     support for a relevant role, to prevent invalid PTM Requests that
     cause ACS violations that are reported as AER Uncorrectable
     Non-Fatal errors (Mika Westerberg)

  Resource management:

   - Prevent resource tree corruption when BAR resize fails (Ilpo
     Järvinen)

   - Restore BARs to the original size if a BAR resize fails (Ilpo
     Järvinen)

   - Remove BAR release from BAR resize attempts by the xe, i915, and
     amdgpu drivers so the PCI core can restore BARs if the resize fails
     (Ilpo Järvinen)

   - Move Resizable BAR code to rebar.c (Ilpo Järvinen)

   - Add pci_rebar_size_supported() and use it in i915 and xe (Ilpo
     Järvinen)

   - Add pci_rebar_get_max_size() and use it in xe and amdgpu (Ilpo
     Järvinen)

  Power management and error handling:

   - For drivers using PCI legacy suspend, save config state at suspend
     so that state (not any earlier state from enumeration, probe, or
     error recovery) will be restored when resuming (Lukas Wunner)

   - For devices with no driver or a driver that lacks power management,
     save config state at hibernate so that state (not any earlier state
     from enumeration, probe, or error recovery) will be restored when
     resuming (Lukas Wunner)

   - Save device config space on device addition, before driver binding,
     so error recovery works more reliably (Lukas Wunner)

   - Drop pci_save_state() from several drivers that no longer need it
     since the PCI core always does it and pci_restore_state() no longer
     invalidates the saved state (Lukas Wunner)

   - Document use of pci_save_state() by drivers to capture the state
     they want restored during error recovery (Lukas Wunner)

  Power control:

   - Add a struct pci_ops.assert_perst() function pointer to
     assert/deassert PCIe PERST# and implement it for the qcom driver
     (Krishna Chaitanya Chundru)

   - Add DT binding and pwrctrl driver for the Toshiba TC9563 PCIe
     switch, which must be held in reset after poweron so the pwrctrl
     driver can configure the switch via I2C before bringing up the
     links (Krishna Chaitanya Chundru)

  Endpoint framework:

   - Convert the endpoint doorbell test to use a threaded IRQ to fix a
     'sleeping while atomic' issue (Bhanu Seshu Kumar Valluri)

   - Add endpoint VNTB MSI doorbell support to reduce latency between
     host and endpoint (Frank Li)

  New native PCIe controller drivers:

   - Add CIX Sky1 host controller DT binding and driver (Hans Zhang)

   - Add NXP S32G host controller DT binding and driver (Vincent
     Guittot)

   - Add Renesas RZ/G3S host controller DT binding and driver (Claudiu
     Beznea)

   - Add SpacemiT K1 host controller DT binding and driver (Alex Elder)

  Amlogic Meson PCIe controller driver:

   - Update DT binding to name DBI region 'dbi', not 'elbi', and update
     driver to support both (Manivannan Sadhasivam)

  Apple PCIe controller driver:

   - Move struct pci_host_bridge allocation from pci_host_common_init()
     to callers, which significantly simplifies pcie-apple (Marc
     Zyngier)

  Broadcom STB PCIe controller driver:

   - Disable advertising ASPM L0s support correctly (Jim Quinlan)

   - Add a panic/die handler to print diagnostic info in case PCIe
     caused an unrecoverable abort (Jim Quinlan)

  Cadence PCIe controller driver:

   - Add module support for Cadence platform host and endpoint
     controller driver (Manikandan K Pillai)

   - Split headers into 'legacy' (LGA) and 'high perf' (HPA) to prepare
     for new CIX Sky1 driver (Manikandan K Pillai)

  MediaTek PCIe controller driver:

   - Convert DT binding to YAML schema (Christian Marangi)

   - Add Airoha AN7583 DT compatible and driver support (Christian
     Marangi)

  Qualcomm PCIe controller driver:

   - Add Qualcomm Kaanapali to SM8550 DT binding (Qiang Yu)

   - Add required 'power-domains' and 'resets' to qcom sa8775p, sc7280,
     sc8280xp, sm8150, sm8250, sm8350, sm8450, sm8550, x1e80100 DT
     schemas (Krzysztof Kozlowski)

   - Look up OPP using both frequency and data rate (not just frequency)
     so RPMh votes can account for both (Krishna Chaitanya Chundru)

  Rockchip DesignWare PCIe controller driver:

   - Add Rockchip RK3528 compatible strings in DT binding (Yao Zi)

  STMicroelectronics STM32MP25 PCIe controller driver:

   - Fix a race between link training and endpoint register
     initialization (Christian Bruel)

   - Align endpoint allocations to match the ATU requirements (Christian
     Bruel)

  Synopsys DesignWare PCIe controller driver:

   - Clear L1 PM Substate Capability 'Supported' bits unless glue driver
     says it's supported, which prevents users from enabling non-working
     L1SS. Currently only qcom and tegra194 support L1SS (Bjorn Helgaas)

   - Remove now-superfluous L1SS disable code from tegra194 (Bjorn
     Helgaas)

   - Configure L1SS support in dw-rockchip when DT says
     'supports-clkreq' (Shawn Lin)

  TI Keystone PCIe controller driver:

   - Fail the probe instead of silently succeeding if ks_pcie_of_data
     didn't specify Root Complex or Endpoint mode (Siddharth Vadapalli)

   - Make keystone buildable as a loadable module, except on ARM32 where
     hook_fault_code() is __init (Siddharth Vadapalli)"

* tag 'pci-v6.19-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (100 commits)
  MAINTAINERS: Add Manivannan Sadhasivam as PCI/pwrctrl maintainer
  MAINTAINERS: Add CIX Sky1 PCIe controller driver maintainer
  PCI: sky1: Add PCIe host support for CIX Sky1
  dt-bindings: PCI: Add CIX Sky1 PCIe Root Complex bindings
  PCI: cadence: Add support for High Perf Architecture (HPA) controller
  MAINTAINERS: Add NXP S32G PCIe controller driver maintainer
  PCI: s32g: Add NXP S32G PCIe controller driver (RC)
  PCI: dwc: Add register and bitfield definitions
  dt-bindings: PCI: s32g: Add NXP S32G PCIe controller
  PCI: Add Renesas RZ/G3S host controller driver
  PCI: host-generic: Move bridge allocation outside of pci_host_common_init()
  dt-bindings: PCI: Add Renesas RZ/G3S PCIe controller binding
  PCI: Validate pci_rebar_size_supported() input
  Documentation: PCI: Amend error recovery doc with pci_save_state() rules
  treewide: Drop pci_save_state() after pci_restore_state()
  PCI/ERR: Ensure error recoverability at all times
  PCI/PM: Stop needlessly clearing state_saved on enumeration and thaw
  PCI/PM: Reinstate clearing state_saved in legacy and !PM codepaths
  PCI: dw-rockchip: Configure L1SS support
  PCI: tegra194: Remove unnecessary L1SS disable code
  ...

1 files changed, 81 insertions, 32 deletions

diff --git a/drivers/pci/controller/pcie-mediatek.c b/drivers/pci/controller/pcie-mediatek.c
index 24cc30a2ab6c..4b78b6528f9f 100644
--- a/drivers/pci/controller/pcie-mediatek.c
+++ b/drivers/pci/controller/pcie-mediatek.c
@@ -143,23 +143,33 @@
 struct mtk_pcie_port;
 
 /**
+ * enum mtk_pcie_quirks - MTK PCIe quirks
+ * @MTK_PCIE_FIX_CLASS_ID: host's class ID needed to be fixed
+ * @MTK_PCIE_FIX_DEVICE_ID: host's device ID needed to be fixed
+ * @MTK_PCIE_NO_MSI: Bridge has no MSI support, and relies on an external block
+ * @MTK_PCIE_SKIP_RSTB: Skip calling RSTB bits on PCIe probe
+ */
+enum mtk_pcie_quirks {
+	MTK_PCIE_FIX_CLASS_ID = BIT(0),
+	MTK_PCIE_FIX_DEVICE_ID = BIT(1),
+	MTK_PCIE_NO_MSI = BIT(2),
+	MTK_PCIE_SKIP_RSTB = BIT(3),
+};
+
+/**
  * struct mtk_pcie_soc - differentiate between host generations
- * @need_fix_class_id: whether this host's class ID needed to be fixed or not
- * @need_fix_device_id: whether this host's device ID needed to be fixed or not
- * @no_msi: Bridge has no MSI support, and relies on an external block
  * @device_id: device ID which this host need to be fixed
  * @ops: pointer to configuration access functions
  * @startup: pointer to controller setting functions
  * @setup_irq: pointer to initialize IRQ functions
+ * @quirks: PCIe device quirks.
  */
 struct mtk_pcie_soc {
-	bool need_fix_class_id;
-	bool need_fix_device_id;
-	bool no_msi;
 	unsigned int device_id;
 	struct pci_ops *ops;
 	int (*startup)(struct mtk_pcie_port *port);
 	int (*setup_irq)(struct mtk_pcie_port *port, struct device_node *node);
+	enum mtk_pcie_quirks quirks;
 };
 
 /**
@@ -679,31 +689,28 @@ static int mtk_pcie_startup_port_v2(struct mtk_pcie_port *port)
 		regmap_update_bits(pcie->cfg, PCIE_SYS_CFG_V2, val, val);
 	}
 
-	/* Assert all reset signals */
-	writel(0, port->base + PCIE_RST_CTRL);
+	if (!(soc->quirks & MTK_PCIE_SKIP_RSTB)) {
+		/* Assert all reset signals */
+		writel(0, port->base + PCIE_RST_CTRL);
 
-	/*
-	 * Enable PCIe link down reset, if link status changed from link up to
-	 * link down, this will reset MAC control registers and configuration
-	 * space.
-	 */
-	writel(PCIE_LINKDOWN_RST_EN, port->base + PCIE_RST_CTRL);
+		/*
+		 * Enable PCIe link down reset, if link status changed from
+		 * link up to link down, this will reset MAC control registers
+		 * and configuration space.
+		 */
+		writel(PCIE_LINKDOWN_RST_EN, port->base + PCIE_RST_CTRL);
 
-	/*
-	 * Described in PCIe CEM specification sections 2.2 (PERST# Signal) and
-	 * 2.2.1 (Initial Power-Up (G3 to S0)). The deassertion of PERST# should
-	 * be delayed 100ms (TPVPERL) for the power and clock to become stable.
-	 */
-	msleep(100);
+		msleep(PCIE_T_PVPERL_MS);
 
-	/* De-assert PHY, PE, PIPE, MAC and configuration reset	*/
-	val = readl(port->base + PCIE_RST_CTRL);
-	val |= PCIE_PHY_RSTB | PCIE_PERSTB | PCIE_PIPE_SRSTB |
-	       PCIE_MAC_SRSTB | PCIE_CRSTB;
-	writel(val, port->base + PCIE_RST_CTRL);
+		/* De-assert PHY, PE, PIPE, MAC and configuration reset	*/
+		val = readl(port->base + PCIE_RST_CTRL);
+		val |= PCIE_PHY_RSTB | PCIE_PERSTB | PCIE_PIPE_SRSTB |
+		       PCIE_MAC_SRSTB | PCIE_CRSTB;
+		writel(val, port->base + PCIE_RST_CTRL);
+	}
 
 	/* Set up vendor ID and class code */
-	if (soc->need_fix_class_id) {
+	if (soc->quirks & MTK_PCIE_FIX_CLASS_ID) {
 		val = PCI_VENDOR_ID_MEDIATEK;
 		writew(val, port->base + PCIE_CONF_VEND_ID);
 
@@ -711,7 +718,7 @@ static int mtk_pcie_startup_port_v2(struct mtk_pcie_port *port)
 		writew(val, port->base + PCIE_CONF_CLASS_ID);
 	}
 
-	if (soc->need_fix_device_id)
+	if (soc->quirks & MTK_PCIE_FIX_DEVICE_ID)
 		writew(soc->device_id, port->base + PCIE_CONF_DEVICE_ID);
 
 	/* 100ms timeout value should be enough for Gen1/2 training */
@@ -821,6 +828,41 @@ static int mtk_pcie_startup_port(struct mtk_pcie_port *port)
 	return 0;
 }
 
+static int mtk_pcie_startup_port_an7583(struct mtk_pcie_port *port)
+{
+	struct mtk_pcie *pcie = port->pcie;
+	struct device *dev = pcie->dev;
+	struct pci_host_bridge *host;
+	struct resource_entry *entry;
+	struct regmap *pbus_regmap;
+	resource_size_t addr;
+	u32 args[2], size;
+
+	/*
+	 * Configure PBus base address and base address mask to allow
+	 * the hw to detect if a given address is accessible on PCIe
+	 * controller.
+	 */
+	pbus_regmap = syscon_regmap_lookup_by_phandle_args(dev->of_node,
+							   "mediatek,pbus-csr",
+							   ARRAY_SIZE(args),
+							   args);
+	if (IS_ERR(pbus_regmap))
+		return PTR_ERR(pbus_regmap);
+
+	host = pci_host_bridge_from_priv(pcie);
+	entry = resource_list_first_type(&host->windows, IORESOURCE_MEM);
+	if (!entry)
+		return -ENODEV;
+
+	addr = entry->res->start - entry->offset;
+	regmap_write(pbus_regmap, args[0], lower_32_bits(addr));
+	size = lower_32_bits(resource_size(entry->res));
+	regmap_write(pbus_regmap, args[1], GENMASK(31, __fls(size)));
+
+	return mtk_pcie_startup_port_v2(port);
+}
+
 static void mtk_pcie_enable_port(struct mtk_pcie_port *port)
 {
 	struct mtk_pcie *pcie = port->pcie;
@@ -1099,7 +1141,7 @@ static int mtk_pcie_probe(struct platform_device *pdev)
 
 	host->ops = pcie->soc->ops;
 	host->sysdata = pcie;
-	host->msi_domain = pcie->soc->no_msi;
+	host->msi_domain = !!(pcie->soc->quirks & MTK_PCIE_NO_MSI);
 
 	err = pci_host_probe(host);
 	if (err)
@@ -1187,9 +1229,9 @@ static const struct dev_pm_ops mtk_pcie_pm_ops = {
 };
 
 static const struct mtk_pcie_soc mtk_pcie_soc_v1 = {
-	.no_msi = true,
 	.ops = &mtk_pcie_ops,
 	.startup = mtk_pcie_startup_port,
+	.quirks = MTK_PCIE_NO_MSI,
 };
 
 static const struct mtk_pcie_soc mtk_pcie_soc_mt2712 = {
@@ -1199,22 +1241,29 @@ static const struct mtk_pcie_soc mtk_pcie_soc_mt2712 = {
 };
 
 static const struct mtk_pcie_soc mtk_pcie_soc_mt7622 = {
-	.need_fix_class_id = true,
 	.ops = &mtk_pcie_ops_v2,
 	.startup = mtk_pcie_startup_port_v2,
 	.setup_irq = mtk_pcie_setup_irq,
+	.quirks = MTK_PCIE_FIX_CLASS_ID,
+};
+
+static const struct mtk_pcie_soc mtk_pcie_soc_an7583 = {
+	.ops = &mtk_pcie_ops_v2,
+	.startup = mtk_pcie_startup_port_an7583,
+	.setup_irq = mtk_pcie_setup_irq,
+	.quirks = MTK_PCIE_FIX_CLASS_ID | MTK_PCIE_SKIP_RSTB,
 };
 
 static const struct mtk_pcie_soc mtk_pcie_soc_mt7629 = {
-	.need_fix_class_id = true,
-	.need_fix_device_id = true,
 	.device_id = PCI_DEVICE_ID_MEDIATEK_7629,
 	.ops = &mtk_pcie_ops_v2,
 	.startup = mtk_pcie_startup_port_v2,
 	.setup_irq = mtk_pcie_setup_irq,
+	.quirks = MTK_PCIE_FIX_CLASS_ID | MTK_PCIE_FIX_DEVICE_ID,
 };
 
 static const struct of_device_id mtk_pcie_ids[] = {
+	{ .compatible = "airoha,an7583-pcie", .data = &mtk_pcie_soc_an7583 },
 	{ .compatible = "mediatek,mt2701-pcie", .data = &mtk_pcie_soc_v1 },
 	{ .compatible = "mediatek,mt7623-pcie", .data = &mtk_pcie_soc_v1 },
 	{ .compatible = "mediatek,mt2712-pcie", .data = &mtk_pcie_soc_mt2712 },