diff options
| author | Andreas Kemnade <andreas@kemnade.info> | 2025-11-15 07:50:51 +0100 |
|---|---|---|
| committer | Mark Brown <broonie@kernel.org> | 2025-11-20 16:29:17 +0000 |
| commit | 12d821bd13d42e6de3ecb1c13918b1f06a3ee213 (patch) | |
| tree | c510f67c2d6588b5342180ad85ba12a79f72b3ab /drivers/regulator/Kconfig | |
| parent | 80bbdefdfb4174ff7e5d4f17658c845ef8f0b623 (diff) | |
regulator: Add FP9931/JD9930 driver
Add a driver for the FP9931/JD9930 regulator. Implement handling of the PG
(power good), TS_EN (temperature sensor enable), and EN (enable regulators)
pins. Implement the pair of symmetric LDOs as a single regulator because
they share a single voltage set register. For simplicity, just add the
temperature sensor (depending on external NTC) directly.
Limitations:
- As these regulators are controlled together with the VCOM regulator via
the EN pin, some kind of management must be in place. As the enable op
is not called when the regulator is already enabled, simple refcounting
seems not to work to avoid clearing EN when one regulator is still
enabled. As these regulators are typically used together, this
limitation should not hurt hard, just provide the is_enabled op.
- As the VCOM step is quite odd (5V/255 steps), rounding is needed.
Due to some limitations in the regulator core, the max/min voltages in
the devicetree must match the idea of the driver how to round things
exactly.
- Night mode is not implemented, so only the FP9931 compatible is needed in
the driver, there is no REGULATOR_MODE_NIGHT and no clear definition in
the datasheet what it does, also the XON pin which seems to be an input
related to that night mode is not used.
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Link: https://patch.msgid.link/20251115-fp9931-submit-v3-3-92f5d0772b68@kemnade.info
Signed-off-by: Mark Brown <broonie@kernel.org>
Diffstat (limited to 'drivers/regulator/Kconfig')
| -rw-r--r-- | drivers/regulator/Kconfig | 10 |
1 files changed, 10 insertions, 0 deletions
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig index d84f3d054c59..c817a4cc00c8 100644 --- a/drivers/regulator/Kconfig +++ b/drivers/regulator/Kconfig @@ -500,6 +500,16 @@ config REGULATOR_ISL6271A help This driver supports ISL6271A voltage regulator chip. +config REGULATOR_FP9931 + tristate "FitiPower FP9931/JD9930 EPD regulator" + depends on I2C + select REGMAP_I2C + help + This driver supports the FP9931/JD9930 voltage regulator chip + which is used to provide power to Electronic Paper Displays + so it is found in E-Book readers. + If HWWON is enabled, it also provides temperature measurement. + config REGULATOR_LM363X tristate "TI LM363X voltage regulators" depends on MFD_TI_LMU |