Merge tag 'drivers-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC driver updates from Arnd Bergmann:
 "These are all the driver updates for SoC specific drivers. There are a
  couple of subsystems with individual maintainers picking up their
  patches here:

   - The reset controller subsystem add support for a few new SoC
     variants to existing drivers, along with other minor improvements

   - The OP-TEE subsystem gets a driver for the ARM FF-A transport

   - The memory controller subsystem has improvements for Tegra,
     Mediatek, Renesas, Freescale and Broadcom specific drivers.

   - The tegra cpuidle driver changes get merged through this tree this
     time. There are only minor changes, but they depend on other tegra
     driver updates here.

   - The ep93xx platform finally moves to using the drivers/clk/
     subsystem, moving the code out of arch/arm in the process. This
     depends on a small sound driver change that is included here as
     well.

   - There are some minor updates for Qualcomm and Tegra specific
     firmware drivers.

  The other driver updates are mainly for drivers/soc, which contains a
  mixture of vendor specific drivers that don't really fit elsewhere:

   - Mediatek drivers gain more support for MT8192, with new support for
     hw-mutex and mmsys routing, plus support for reset lines in the
     mmsys driver.

   - Qualcomm gains a new "sleep stats" driver, and support for the
     "Generic Packet Router" in the APR driver.

   - There is a new user interface for routing the UARTS on ASpeed BMCs,
     something that apparently nobody else has needed so far.

   - More drivers can now be built as loadable modules, in particular
     for Broadcom and Samsung platforms.

   - Lots of improvements to the TI sysc driver for better
     suspend/resume support"

  Finally, there are lots of minor cleanups and new device IDs for
  amlogic, renesas, tegra, qualcomm, mediateka, samsung, imx,
  layerscape, allwinner, broadcom, and omap"

* tag 'drivers-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (179 commits)
  optee: Fix spelling mistake "reclain" -> "reclaim"
  Revert "firmware: qcom: scm: Add support for MC boot address API"
  qcom: spm: allow compile-testing
  firmware: arm_ffa: Remove unused 'compat_version' variable
  soc: samsung: exynos-chipid: add exynosautov9 SoC support
  firmware: qcom: scm: Don't break compile test on non-ARM platforms
  soc: qcom: smp2p: Add of_node_put() before goto
  soc: qcom: apr: Add of_node_put() before return
  soc: qcom: qcom_stats: Fix client votes offset
  soc: qcom: rpmhpd: fix sm8350_mxc's peer domain
  dt-bindings: arm: cpus: Document qcom,msm8916-smp enable-method
  ARM: qcom: Add qcom,msm8916-smp enable-method identical to MSM8226
  firmware: qcom: scm: Add support for MC boot address API
  soc: qcom: spm: Add 8916 SPM register data
  dt-bindings: soc: qcom: spm: Document qcom,msm8916-saw2-v3.0-cpu
  soc: qcom: socinfo: Add PM8150C and SMB2351 models
  firmware: qcom_scm: Fix error retval in __qcom_scm_is_call_available()
  soc: aspeed: Add UART routing support
  soc: fsl: dpio: rename the enqueue descriptor variable
  soc: fsl: dpio: use an explicit NULL instead of 0
  ...

1 files changed, 603 insertions, 0 deletions

diff --git a/drivers/soc/aspeed/aspeed-uart-routing.c b/drivers/soc/aspeed/aspeed-uart-routing.c
new file mode 100644
index 000000000000..ef8b24fd1851
--- /dev/null
+++ b/drivers/soc/aspeed/aspeed-uart-routing.c
@@ -0,0 +1,603 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (c) 2018 Google LLC
+ * Copyright (c) 2021 Aspeed Technology Inc.
+ */
+#include <linux/device.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/of_platform.h>
+#include <linux/mfd/syscon.h>
+#include <linux/regmap.h>
+#include <linux/platform_device.h>
+
+/* register offsets */
+#define HICR9	0x98
+#define HICRA	0x9c
+
+/* attributes options */
+#define UART_ROUTING_IO1	"io1"
+#define UART_ROUTING_IO2	"io2"
+#define UART_ROUTING_IO3	"io3"
+#define UART_ROUTING_IO4	"io4"
+#define UART_ROUTING_IO5	"io5"
+#define UART_ROUTING_IO6	"io6"
+#define UART_ROUTING_IO10	"io10"
+#define UART_ROUTING_UART1	"uart1"
+#define UART_ROUTING_UART2	"uart2"
+#define UART_ROUTING_UART3	"uart3"
+#define UART_ROUTING_UART4	"uart4"
+#define UART_ROUTING_UART5	"uart5"
+#define UART_ROUTING_UART6	"uart6"
+#define UART_ROUTING_UART10	"uart10"
+#define UART_ROUTING_RES	"reserved"
+
+struct aspeed_uart_routing {
+	struct regmap *map;
+	struct attribute_group const *attr_grp;
+};
+
+struct aspeed_uart_routing_selector {
+	struct device_attribute	dev_attr;
+	uint8_t reg;
+	uint8_t mask;
+	uint8_t shift;
+	const char *const options[];
+};
+
+#define to_routing_selector(_dev_attr)					\
+	container_of(_dev_attr, struct aspeed_uart_routing_selector, dev_attr)
+
+static ssize_t aspeed_uart_routing_show(struct device *dev,
+					struct device_attribute *attr,
+					char *buf);
+
+static ssize_t aspeed_uart_routing_store(struct device *dev,
+					 struct device_attribute *attr,
+					 const char *buf, size_t count);
+
+#define ROUTING_ATTR(_name) {					\
+	.attr = {.name = _name,					\
+		 .mode = VERIFY_OCTAL_PERMISSIONS(0644) },	\
+	.show = aspeed_uart_routing_show,			\
+	.store = aspeed_uart_routing_store,			\
+}
+
+/* routing selector for AST25xx */
+static struct aspeed_uart_routing_selector ast2500_io6_sel = {
+	.dev_attr = ROUTING_ATTR(UART_ROUTING_IO6),
+	.reg = HICR9,
+	.shift = 8,
+	.mask = 0xf,
+	.options = {
+		    UART_ROUTING_UART1,
+		    UART_ROUTING_UART2,
+		    UART_ROUTING_UART3,
+		    UART_ROUTING_UART4,
+		    UART_ROUTING_UART5,
+		    UART_ROUTING_IO1,
+		    UART_ROUTING_IO2,
+		    UART_ROUTING_IO3,
+		    UART_ROUTING_IO4,
+		    UART_ROUTING_IO5,
+		    NULL,
+		    },
+};
+
+static struct aspeed_uart_routing_selector ast2500_uart5_sel = {
+	.dev_attr = ROUTING_ATTR(UART_ROUTING_UART5),
+	.reg = HICRA,
+	.shift = 28,
+	.mask = 0xf,
+	.options = {
+		    UART_ROUTING_IO5,
+		    UART_ROUTING_IO1,
+		    UART_ROUTING_IO2,
+		    UART_ROUTING_IO3,
+		    UART_ROUTING_IO4,
+		    UART_ROUTING_UART1,
+		    UART_ROUTING_UART2,
+		    UART_ROUTING_UART3,
+		    UART_ROUTING_UART4,
+		    UART_ROUTING_IO6,
+		    NULL,
+		    },
+};
+
+static struct aspeed_uart_routing_selector ast2500_uart4_sel = {
+	.dev_attr = ROUTING_ATTR(UART_ROUTING_UART4),
+	.reg = HICRA,
+	.shift = 25,
+	.mask = 0x7,
+	.options = {
+		    UART_ROUTING_IO4,
+		    UART_ROUTING_IO1,
+		    UART_ROUTING_IO2,
+		    UART_ROUTING_IO3,
+		    UART_ROUTING_UART1,
+		    UART_ROUTING_UART2,
+		    UART_ROUTING_UART3,
+		    UART_ROUTING_IO6,
+		    NULL,
+	},
+};
+
+static struct aspeed_uart_routing_selector ast2500_uart3_sel = {
+	.dev_attr = ROUTING_ATTR(UART_ROUTING_UART3),
+	.reg = HICRA,
+	.shift = 22,
+	.mask = 0x7,
+	.options = {
+		    UART_ROUTING_IO3,
+		    UART_ROUTING_IO4,
+		    UART_ROUTING_IO1,
+		    UART_ROUTING_IO2,
+		    UART_ROUTING_UART4,
+		    UART_ROUTING_UART1,
+		    UART_ROUTING_UART2,
+		    UART_ROUTING_IO6,
+		    NULL,
+		    },
+};
+
+static struct aspeed_uart_routing_selector ast2500_uart2_sel = {
+	.dev_attr = ROUTING_ATTR(UART_ROUTING_UART2),
+	.reg = HICRA,
+	.shift = 19,
+	.mask = 0x7,
+	.options = {
+		    UART_ROUTING_IO2,
+		    UART_ROUTING_IO3,
+		    UART_ROUTING_IO4,
+		    UART_ROUTING_IO1,
+		    UART_ROUTING_UART3,
+		    UART_ROUTING_UART4,
+		    UART_ROUTING_UART1,
+		    UART_ROUTING_IO6,
+		    NULL,
+		    },
+};
+
+static struct aspeed_uart_routing_selector ast2500_uart1_sel = {
+	.dev_attr = ROUTING_ATTR(UART_ROUTING_UART1),
+	.reg = HICRA,
+	.shift = 16,
+	.mask = 0x7,
+	.options = {
+		    UART_ROUTING_IO1,
+		    UART_ROUTING_IO2,
+		    UART_ROUTING_IO3,
+		    UART_ROUTING_IO4,
+		    UART_ROUTING_UART2,
+		    UART_ROUTING_UART3,
+		    UART_ROUTING_UART4,
+		    UART_ROUTING_IO6,
+		    NULL,
+		    },
+};
+
+static struct aspeed_uart_routing_selector ast2500_io5_sel = {
+	.dev_attr = ROUTING_ATTR(UART_ROUTING_IO5),
+	.reg = HICRA,
+	.shift = 12,
+	.mask = 0x7,
+	.options = {
+		    UART_ROUTING_UART5,
+		    UART_ROUTING_UART1,
+		    UART_ROUTING_UART2,
+		    UART_ROUTING_UART3,
+		    UART_ROUTING_UART4,
+		    UART_ROUTING_IO1,
+		    UART_ROUTING_IO3,
+		    UART_ROUTING_IO6,
+		    NULL,
+		    },
+};
+
+static struct aspeed_uart_routing_selector ast2500_io4_sel = {
+	.dev_attr = ROUTING_ATTR(UART_ROUTING_IO4),
+	.reg = HICRA,
+	.shift = 9,
+	.mask = 0x7,
+	.options = {
+		    UART_ROUTING_UART4,
+		    UART_ROUTING_UART5,
+		    UART_ROUTING_UART1,
+		    UART_ROUTING_UART2,
+		    UART_ROUTING_UART3,
+		    UART_ROUTING_IO1,
+		    UART_ROUTING_IO2,
+		    UART_ROUTING_IO6,
+		    NULL,
+		    },
+};
+
+static struct aspeed_uart_routing_selector ast2500_io3_sel = {
+	.dev_attr = ROUTING_ATTR(UART_ROUTING_IO3),
+	.reg = HICRA,
+	.shift = 6,
+	.mask = 0x7,
+	.options = {
+		    UART_ROUTING_UART3,
+		    UART_ROUTING_UART4,
+		    UART_ROUTING_UART5,
+		    UART_ROUTING_UART1,
+		    UART_ROUTING_UART2,
+		    UART_ROUTING_IO1,
+		    UART_ROUTING_IO2,
+		    UART_ROUTING_IO6,
+		    NULL,
+		    },
+};
+
+static struct aspeed_uart_routing_selector ast2500_io2_sel = {
+	.dev_attr = ROUTING_ATTR(UART_ROUTING_IO2),
+	.reg = HICRA,
+	.shift = 3,
+	.mask = 0x7,
+	.options = {
+		    UART_ROUTING_UART2,
+		    UART_ROUTING_UART3,
+		    UART_ROUTING_UART4,
+		    UART_ROUTING_UART5,
+		    UART_ROUTING_UART1,
+		    UART_ROUTING_IO3,
+		    UART_ROUTING_IO4,
+		    UART_ROUTING_IO6,
+		    NULL,
+		    },
+};
+
+static struct aspeed_uart_routing_selector ast2500_io1_sel = {
+	.dev_attr = ROUTING_ATTR(UART_ROUTING_IO1),
+	.reg = HICRA,
+	.shift = 0,
+	.mask = 0x7,
+	.options = {
+		    UART_ROUTING_UART1,
+		    UART_ROUTING_UART2,
+		    UART_ROUTING_UART3,
+		    UART_ROUTING_UART4,
+		    UART_ROUTING_UART5,
+		    UART_ROUTING_IO3,
+		    UART_ROUTING_IO4,
+		    UART_ROUTING_IO6,
+		    NULL,
+		    },
+};
+
+static struct attribute *ast2500_uart_routing_attrs[] = {
+	&ast2500_io6_sel.dev_attr.attr,
+	&ast2500_uart5_sel.dev_attr.attr,
+	&ast2500_uart4_sel.dev_attr.attr,
+	&ast2500_uart3_sel.dev_attr.attr,
+	&ast2500_uart2_sel.dev_attr.attr,
+	&ast2500_uart1_sel.dev_attr.attr,
+	&ast2500_io5_sel.dev_attr.attr,
+	&ast2500_io4_sel.dev_attr.attr,
+	&ast2500_io3_sel.dev_attr.attr,
+	&ast2500_io2_sel.dev_attr.attr,
+	&ast2500_io1_sel.dev_attr.attr,
+	NULL,
+};
+
+static const struct attribute_group ast2500_uart_routing_attr_group = {
+	.attrs = ast2500_uart_routing_attrs,
+};
+
+/* routing selector for AST26xx */
+static struct aspeed_uart_routing_selector ast2600_uart10_sel = {
+	.dev_attr = ROUTING_ATTR(UART_ROUTING_UART10),
+	.reg = HICR9,
+	.shift = 12,
+	.mask = 0xf,
+	.options = {
+		    UART_ROUTING_IO10,
+		    UART_ROUTING_IO1,
+		    UART_ROUTING_IO2,
+		    UART_ROUTING_IO3,
+		    UART_ROUTING_IO4,
+			UART_ROUTING_RES,
+		    UART_ROUTING_UART1,
+		    UART_ROUTING_UART2,
+		    UART_ROUTING_UART3,
+		    UART_ROUTING_UART4,
+		    NULL,
+		    },
+};
+
+static struct aspeed_uart_routing_selector ast2600_io10_sel = {
+	.dev_attr = ROUTING_ATTR(UART_ROUTING_IO10),
+	.reg = HICR9,
+	.shift = 8,
+	.mask = 0xf,
+	.options = {
+		    UART_ROUTING_UART1,
+		    UART_ROUTING_UART2,
+		    UART_ROUTING_UART3,
+		    UART_ROUTING_UART4,
+			UART_ROUTING_RES,
+		    UART_ROUTING_IO1,
+		    UART_ROUTING_IO2,
+		    UART_ROUTING_IO3,
+		    UART_ROUTING_IO4,
+			UART_ROUTING_RES,
+		    UART_ROUTING_UART10,
+		    NULL,
+		    },
+};
+
+static struct aspeed_uart_routing_selector ast2600_uart4_sel = {
+	.dev_attr = ROUTING_ATTR(UART_ROUTING_UART4),
+	.reg = HICRA,
+	.shift = 25,
+	.mask = 0x7,
+	.options = {
+		    UART_ROUTING_IO4,
+		    UART_ROUTING_IO1,
+		    UART_ROUTING_IO2,
+		    UART_ROUTING_IO3,
+		    UART_ROUTING_UART1,
+		    UART_ROUTING_UART2,
+		    UART_ROUTING_UART3,
+		    UART_ROUTING_IO10,
+		    NULL,
+	},
+};
+
+static struct aspeed_uart_routing_selector ast2600_uart3_sel = {
+	.dev_attr = ROUTING_ATTR(UART_ROUTING_UART3),
+	.reg = HICRA,
+	.shift = 22,
+	.mask = 0x7,
+	.options = {
+		    UART_ROUTING_IO3,
+		    UART_ROUTING_IO4,
+		    UART_ROUTING_IO1,
+		    UART_ROUTING_IO2,
+		    UART_ROUTING_UART4,
+		    UART_ROUTING_UART1,
+		    UART_ROUTING_UART2,
+		    UART_ROUTING_IO10,
+		    NULL,
+		    },
+};
+
+static struct aspeed_uart_routing_selector ast2600_uart2_sel = {
+	.dev_attr = ROUTING_ATTR(UART_ROUTING_UART2),
+	.reg = HICRA,
+	.shift = 19,
+	.mask = 0x7,
+	.options = {
+		    UART_ROUTING_IO2,
+		    UART_ROUTING_IO3,
+		    UART_ROUTING_IO4,
+		    UART_ROUTING_IO1,
+		    UART_ROUTING_UART3,
+		    UART_ROUTING_UART4,
+		    UART_ROUTING_UART1,
+		    UART_ROUTING_IO10,
+		    NULL,
+		    },
+};
+
+static struct aspeed_uart_routing_selector ast2600_uart1_sel = {
+	.dev_attr = ROUTING_ATTR(UART_ROUTING_UART1),
+	.reg = HICRA,
+	.shift = 16,
+	.mask = 0x7,
+	.options = {
+		    UART_ROUTING_IO1,
+		    UART_ROUTING_IO2,
+		    UART_ROUTING_IO3,
+		    UART_ROUTING_IO4,
+		    UART_ROUTING_UART2,
+		    UART_ROUTING_UART3,
+		    UART_ROUTING_UART4,
+		    UART_ROUTING_IO10,
+		    NULL,
+		    },
+};
+
+static struct aspeed_uart_routing_selector ast2600_io4_sel = {
+	.dev_attr = ROUTING_ATTR(UART_ROUTING_IO4),
+	.reg = HICRA,
+	.shift = 9,
+	.mask = 0x7,
+	.options = {
+		    UART_ROUTING_UART4,
+		    UART_ROUTING_UART10,
+		    UART_ROUTING_UART1,
+		    UART_ROUTING_UART2,
+		    UART_ROUTING_UART3,
+		    UART_ROUTING_IO1,
+		    UART_ROUTING_IO2,
+		    UART_ROUTING_IO10,
+		    NULL,
+		    },
+};
+
+static struct aspeed_uart_routing_selector ast2600_io3_sel = {
+	.dev_attr = ROUTING_ATTR(UART_ROUTING_IO3),
+	.reg = HICRA,
+	.shift = 6,
+	.mask = 0x7,
+	.options = {
+		    UART_ROUTING_UART3,
+		    UART_ROUTING_UART4,
+		    UART_ROUTING_UART10,
+		    UART_ROUTING_UART1,
+		    UART_ROUTING_UART2,
+		    UART_ROUTING_IO1,
+		    UART_ROUTING_IO2,
+		    UART_ROUTING_IO10,
+		    NULL,
+		    },
+};
+
+static struct aspeed_uart_routing_selector ast2600_io2_sel = {
+	.dev_attr = ROUTING_ATTR(UART_ROUTING_IO2),
+	.reg = HICRA,
+	.shift = 3,
+	.mask = 0x7,
+	.options = {
+		    UART_ROUTING_UART2,
+		    UART_ROUTING_UART3,
+		    UART_ROUTING_UART4,
+		    UART_ROUTING_UART10,
+		    UART_ROUTING_UART1,
+		    UART_ROUTING_IO3,
+		    UART_ROUTING_IO4,
+		    UART_ROUTING_IO10,
+		    NULL,
+		    },
+};
+
+static struct aspeed_uart_routing_selector ast2600_io1_sel = {
+	.dev_attr = ROUTING_ATTR(UART_ROUTING_IO1),
+	.reg = HICRA,
+	.shift = 0,
+	.mask = 0x7,
+	.options = {
+		    UART_ROUTING_UART1,
+		    UART_ROUTING_UART2,
+		    UART_ROUTING_UART3,
+		    UART_ROUTING_UART4,
+		    UART_ROUTING_UART10,
+		    UART_ROUTING_IO3,
+		    UART_ROUTING_IO4,
+		    UART_ROUTING_IO10,
+		    NULL,
+		    },
+};
+
+static struct attribute *ast2600_uart_routing_attrs[] = {
+	&ast2600_uart10_sel.dev_attr.attr,
+	&ast2600_io10_sel.dev_attr.attr,
+	&ast2600_uart4_sel.dev_attr.attr,
+	&ast2600_uart3_sel.dev_attr.attr,
+	&ast2600_uart2_sel.dev_attr.attr,
+	&ast2600_uart1_sel.dev_attr.attr,
+	&ast2600_io4_sel.dev_attr.attr,
+	&ast2600_io3_sel.dev_attr.attr,
+	&ast2600_io2_sel.dev_attr.attr,
+	&ast2600_io1_sel.dev_attr.attr,
+	NULL,
+};
+
+static const struct attribute_group ast2600_uart_routing_attr_group = {
+	.attrs = ast2600_uart_routing_attrs,
+};
+
+static ssize_t aspeed_uart_routing_show(struct device *dev,
+					struct device_attribute *attr,
+					char *buf)
+{
+	struct aspeed_uart_routing *uart_routing = dev_get_drvdata(dev);
+	struct aspeed_uart_routing_selector *sel = to_routing_selector(attr);
+	int val, pos, len;
+
+	regmap_read(uart_routing->map, sel->reg, &val);
+	val = (val >> sel->shift) & sel->mask;
+
+	len = 0;
+	for (pos = 0; sel->options[pos] != NULL; ++pos) {
+		if (pos == val)
+			len += sysfs_emit_at(buf, len, "[%s] ", sel->options[pos]);
+		else
+			len += sysfs_emit_at(buf, len, "%s ", sel->options[pos]);
+	}
+
+	if (val >= pos)
+		len += sysfs_emit_at(buf, len, "[unknown(%d)]", val);
+
+	len += sysfs_emit_at(buf, len, "\n");
+
+	return len;
+}
+
+static ssize_t aspeed_uart_routing_store(struct device *dev,
+					 struct device_attribute *attr,
+					 const char *buf, size_t count)
+{
+	struct aspeed_uart_routing *uart_routing = dev_get_drvdata(dev);
+	struct aspeed_uart_routing_selector *sel = to_routing_selector(attr);
+	int val;
+
+	val = match_string(sel->options, -1, buf);
+	if (val < 0) {
+		dev_err(dev, "invalid value \"%s\"\n", buf);
+		return -EINVAL;
+	}
+
+	regmap_update_bits(uart_routing->map, sel->reg,
+			(sel->mask << sel->shift),
+			(val & sel->mask) << sel->shift);
+
+	return count;
+}
+
+static int aspeed_uart_routing_probe(struct platform_device *pdev)
+{
+	int rc;
+	struct device *dev = &pdev->dev;
+	struct aspeed_uart_routing *uart_routing;
+
+	uart_routing = devm_kzalloc(&pdev->dev, sizeof(*uart_routing), GFP_KERNEL);
+	if (!uart_routing)
+		return -ENOMEM;
+
+	uart_routing->map = syscon_node_to_regmap(dev->parent->of_node);
+	if (IS_ERR(uart_routing->map)) {
+		dev_err(dev, "cannot get regmap\n");
+		return PTR_ERR(uart_routing->map);
+	}
+
+	uart_routing->attr_grp = of_device_get_match_data(dev);
+
+	rc = sysfs_create_group(&dev->kobj, uart_routing->attr_grp);
+	if (rc < 0)
+		return rc;
+
+	dev_set_drvdata(dev, uart_routing);
+
+	dev_info(dev, "module loaded\n");
+
+	return 0;
+}
+
+static int aspeed_uart_routing_remove(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct aspeed_uart_routing *uart_routing = platform_get_drvdata(pdev);
+
+	sysfs_remove_group(&dev->kobj, uart_routing->attr_grp);
+
+	return 0;
+}
+
+static const struct of_device_id aspeed_uart_routing_table[] = {
+	{ .compatible = "aspeed,ast2400-uart-routing",
+	  .data = &ast2500_uart_routing_attr_group },
+	{ .compatible = "aspeed,ast2500-uart-routing",
+	  .data = &ast2500_uart_routing_attr_group },
+	{ .compatible = "aspeed,ast2600-uart-routing",
+	  .data = &ast2600_uart_routing_attr_group },
+	{ },
+};
+
+static struct platform_driver aspeed_uart_routing_driver = {
+	.driver = {
+		.name = "aspeed-uart-routing",
+		.of_match_table = aspeed_uart_routing_table,
+	},
+	.probe = aspeed_uart_routing_probe,
+	.remove = aspeed_uart_routing_remove,
+};
+
+module_platform_driver(aspeed_uart_routing_driver);
+
+MODULE_AUTHOR("Oskar Senft <osk@google.com>");
+MODULE_AUTHOR("Chia-Wei Wang <chiawei_wang@aspeedtech.com>");
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("Driver to configure Aspeed UART routing");