serial: 8250: use serial_port_in/out() helpers

There are serial_port_in/out() helpers to be used instead of direct
p->serial_in/out(). Use them in various 8250 drivers.

Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Cc: "Ilpo Järvinen" <ilpo.jarvinen@linux.intel.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

--
[v2]
* Use serial_port_in/out() and not serial_in/out() [Andy]

Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> # 8250_dw
Link: https://lore.kernel.org/r/20250317070046.24386-28-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

3 files changed, 13 insertions, 13 deletions

diff --git a/drivers/tty/serial/8250/8250_dw.c b/drivers/tty/serial/8250/8250_dw.c
index af24ec25d976..f068b8d7840a 100644
--- a/drivers/tty/serial/8250/8250_dw.c
+++ b/drivers/tty/serial/8250/8250_dw.c
@@ -120,12 +120,12 @@ static void dw8250_force_idle(struct uart_port *p)
 	 * enabled.
 	 */
 	if (up->fcr & UART_FCR_ENABLE_FIFO) {
-		lsr = p->serial_in(p, UART_LSR);
+		lsr = serial_port_in(p, UART_LSR);
 		if (!(lsr & UART_LSR_DR))
 			return;
 	}
 
-	(void)p->serial_in(p, UART_RX);
+	serial_port_in(p, UART_RX);
 }
 
 static void dw8250_check_lcr(struct uart_port *p, int offset, int value)
@@ -139,7 +139,7 @@ static void dw8250_check_lcr(struct uart_port *p, int offset, int value)
 
 	/* Make sure LCR write wasn't ignored */
 	while (tries--) {
-		unsigned int lcr = p->serial_in(p, offset);
+		unsigned int lcr = serial_port_in(p, offset);
 
 		if ((value & ~UART_LCR_SPAR) == (lcr & ~UART_LCR_SPAR))
 			return;
@@ -260,7 +260,7 @@ static int dw8250_handle_irq(struct uart_port *p)
 {
 	struct uart_8250_port *up = up_to_u8250p(p);
 	struct dw8250_data *d = to_dw8250_data(p->private_data);
-	unsigned int iir = p->serial_in(p, UART_IIR);
+	unsigned int iir = serial_port_in(p, UART_IIR);
 	bool rx_timeout = (iir & 0x3f) == UART_IIR_RX_TIMEOUT;
 	unsigned int quirks = d->pdata->quirks;
 	unsigned int status;
@@ -281,7 +281,7 @@ static int dw8250_handle_irq(struct uart_port *p)
 		status = serial_lsr_in(up);
 
 		if (!(status & (UART_LSR_DR | UART_LSR_BI)))
-			(void) p->serial_in(p, UART_RX);
+			serial_port_in(p, UART_RX);
 
 		uart_port_unlock_irqrestore(p, flags);
 	}
@@ -303,7 +303,7 @@ static int dw8250_handle_irq(struct uart_port *p)
 
 	if ((iir & UART_IIR_BUSY) == UART_IIR_BUSY) {
 		/* Clear the USR */
-		(void)p->serial_in(p, d->pdata->usr_reg);
+		serial_port_in(p, d->pdata->usr_reg);
 
 		return 1;
 	}
@@ -390,7 +390,7 @@ static void dw8250_set_termios(struct uart_port *p, struct ktermios *termios,
 static void dw8250_set_ldisc(struct uart_port *p, struct ktermios *termios)
 {
 	struct uart_8250_port *up = up_to_u8250p(p);
-	unsigned int mcr = p->serial_in(p, UART_MCR);
+	unsigned int mcr = serial_port_in(p, UART_MCR);
 
 	if (up->capabilities & UART_CAP_IRDA) {
 		if (termios->c_line == N_IRDA)
@@ -398,7 +398,7 @@ static void dw8250_set_ldisc(struct uart_port *p, struct ktermios *termios)
 		else
 			mcr &= ~DW_UART_MCR_SIRE;
 
-		p->serial_out(p, UART_MCR, mcr);
+		serial_port_out(p, UART_MCR, mcr);
 	}
 	serial8250_do_set_ldisc(p, termios);
 }
diff --git a/drivers/tty/serial/8250/8250_fsl.c b/drivers/tty/serial/8250/8250_fsl.c
index 1b7bd55619c6..649ae5c8304d 100644
--- a/drivers/tty/serial/8250/8250_fsl.c
+++ b/drivers/tty/serial/8250/8250_fsl.c
@@ -32,7 +32,7 @@ int fsl8250_handle_irq(struct uart_port *port)
 
 	uart_port_lock_irqsave(&up->port, &flags);
 
-	iir = port->serial_in(port, UART_IIR);
+	iir = serial_port_in(port, UART_IIR);
 	if (iir & UART_IIR_NO_INT) {
 		uart_port_unlock_irqrestore(&up->port, flags);
 		return 0;
@@ -54,12 +54,12 @@ int fsl8250_handle_irq(struct uart_port *port)
 	if (unlikely((iir & UART_IIR_ID) == UART_IIR_RLSI &&
 		     (up->lsr_saved_flags & UART_LSR_BI))) {
 		up->lsr_saved_flags &= ~UART_LSR_BI;
-		port->serial_in(port, UART_RX);
+		serial_port_in(port, UART_RX);
 		uart_port_unlock_irqrestore(&up->port, flags);
 		return 1;
 	}
 
-	lsr = orig_lsr = up->port.serial_in(&up->port, UART_LSR);
+	lsr = orig_lsr = serial_port_in(port, UART_LSR);
 
 	/* Process incoming characters first */
 	if ((lsr & (UART_LSR_DR | UART_LSR_BI)) &&
@@ -71,7 +71,7 @@ int fsl8250_handle_irq(struct uart_port *port)
 	if ((orig_lsr & UART_LSR_OE) && (up->overrun_backoff_time_ms > 0)) {
 		unsigned long delay;
 
-		up->ier = port->serial_in(port, UART_IER);
+		up->ier = serial_port_in(port, UART_IER);
 		if (up->ier & (UART_IER_RLSI | UART_IER_RDI)) {
 			port->ops->stop_rx(port);
 		} else {
diff --git a/drivers/tty/serial/8250/8250_omap.c b/drivers/tty/serial/8250/8250_omap.c
index c2b75e3f106d..2a0ce11f405d 100644
--- a/drivers/tty/serial/8250/8250_omap.c
+++ b/drivers/tty/serial/8250/8250_omap.c
@@ -692,7 +692,7 @@ static irqreturn_t omap8250_irq(int irq, void *dev_id)
 
 		/* Synchronize UART_IER access against the console. */
 		uart_port_lock(port);
-		up->ier = port->serial_in(port, UART_IER);
+		up->ier = serial_port_in(port, UART_IER);
 		if (up->ier & (UART_IER_RLSI | UART_IER_RDI)) {
 			port->ops->stop_rx(port);
 		} else {