Merge branch 7.0/scsi-fixes into 7.1/scsi-staging

Pull in fixes to resolve mpi3mr merge conflict.

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

1 files changed, 35 insertions, 14 deletions

diff --git a/drivers/ufs/core/ufshcd.c b/drivers/ufs/core/ufshcd.c
index cb81aa94d5c4..5c3518f1f97c 100644
--- a/drivers/ufs/core/ufshcd.c
+++ b/drivers/ufs/core/ufshcd.c
@@ -24,6 +24,7 @@
 #include <linux/pm_opp.h>
 #include <linux/regulator/consumer.h>
 #include <linux/sched/clock.h>
+#include <linux/sizes.h>
 #include <linux/iopoll.h>
 #include <scsi/scsi_cmnd.h>
 #include <scsi/scsi_dbg.h>
@@ -513,8 +514,8 @@ static void ufshcd_add_command_trace(struct ufs_hba *hba, struct scsi_cmnd *cmd,
 
 	if (hba->mcq_enabled) {
 		struct ufs_hw_queue *hwq = ufshcd_mcq_req_to_hwq(hba, rq);
-
-		hwq_id = hwq->id;
+		if (hwq)
+			hwq_id = hwq->id;
 	} else {
 		doorbell = ufshcd_readl(hba, REG_UTP_TRANSFER_REQ_DOOR_BELL);
 	}
@@ -4433,14 +4434,6 @@ out_unlock:
 	spin_unlock_irqrestore(hba->host->host_lock, flags);
 	mutex_unlock(&hba->uic_cmd_mutex);
 
-	/*
-	 * If the h8 exit fails during the runtime resume process, it becomes
-	 * stuck and cannot be recovered through the error handler.  To fix
-	 * this, use link recovery instead of the error handler.
-	 */
-	if (ret && hba->pm_op_in_progress)
-		ret = ufshcd_link_recovery(hba);
-
 	return ret;
 }
 
@@ -5372,6 +5365,25 @@ static void ufshcd_lu_init(struct ufs_hba *hba, struct scsi_device *sdev)
 		hba->dev_info.rpmb_region_size[1] = desc_buf[RPMB_UNIT_DESC_PARAM_REGION1_SIZE];
 		hba->dev_info.rpmb_region_size[2] = desc_buf[RPMB_UNIT_DESC_PARAM_REGION2_SIZE];
 		hba->dev_info.rpmb_region_size[3] = desc_buf[RPMB_UNIT_DESC_PARAM_REGION3_SIZE];
+
+		if (hba->dev_info.wspecversion <= 0x0220) {
+			/*
+			 * These older spec chips have only one RPMB region,
+			 * sized between 128 kB minimum and 16 MB maximum.
+			 * No per region size fields are provided (respective
+			 * REGIONX_SIZE fields always contain zeros), so get
+			 * it from the logical block count and size fields for
+			 * compatibility
+			 *
+			 * (See JESD220C-2_2 Section 14.1.4.6
+			 * RPMB Unit Descriptor,* offset 13h, 4 bytes)
+			 */
+			hba->dev_info.rpmb_region_size[0] =
+				(get_unaligned_be64(desc_buf
+					+ RPMB_UNIT_DESC_PARAM_LOGICAL_BLK_COUNT)
+				<< desc_buf[RPMB_UNIT_DESC_PARAM_LOGICAL_BLK_SIZE])
+				/ SZ_128K;
+		}
 	}
 
 
@@ -6089,6 +6101,7 @@ static int ufshcd_disable_auto_bkops(struct ufs_hba *hba)
 
 	hba->auto_bkops_enabled = false;
 	trace_ufshcd_auto_bkops_state(hba, "Disabled");
+	hba->urgent_bkops_lvl = BKOPS_STATUS_PERF_IMPACT;
 	hba->is_urgent_bkops_lvl_checked = false;
 out:
 	return err;
@@ -6192,7 +6205,7 @@ static void ufshcd_bkops_exception_event_handler(struct ufs_hba *hba)
 	 * impacted or critical. Handle these device by determining their urgent
 	 * bkops status at runtime.
 	 */
-	if (curr_status < BKOPS_STATUS_PERF_IMPACT) {
+	if ((curr_status > BKOPS_STATUS_NO_OP) && (curr_status < BKOPS_STATUS_PERF_IMPACT)) {
 		dev_err(hba->dev, "%s: device raised urgent BKOPS exception for bkops status %d\n",
 				__func__, curr_status);
 		/* update the current status as the urgent bkops level */
@@ -7234,7 +7247,7 @@ static irqreturn_t ufshcd_handle_mcq_cq_events(struct ufs_hba *hba, bool reset_i
 
 	ret = ufshcd_vops_get_outstanding_cqs(hba, &outstanding_cqs);
 	if (ret)
-		outstanding_cqs = (1U << hba->nr_hw_queues) - 1;
+		outstanding_cqs = (1ULL << hba->nr_hw_queues) - 1;
 
 	/* Exclude the poll queues */
 	nr_queues = hba->nr_hw_queues - hba->nr_queues[HCTX_TYPE_POLL];
@@ -10226,6 +10239,7 @@ static int __ufshcd_wl_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op)
 	}
 
 	flush_work(&hba->eeh_work);
+	cancel_delayed_work_sync(&hba->ufs_rtc_update_work);
 
 	ret = ufshcd_vops_suspend(hba, pm_op, PRE_CHANGE);
 	if (ret)
@@ -10280,7 +10294,6 @@ vops_suspend:
 	if (ret)
 		goto set_link_active;
 
-	cancel_delayed_work_sync(&hba->ufs_rtc_update_work);
 	goto out;
 
 set_link_active:
@@ -10352,7 +10365,15 @@ static int __ufshcd_wl_resume(struct ufs_hba *hba, enum ufs_pm_op pm_op)
 		} else {
 			dev_err(hba->dev, "%s: hibern8 exit failed %d\n",
 					__func__, ret);
-			goto vendor_suspend;
+			/*
+			 * If the h8 exit fails during the runtime resume
+			 * process, it becomes stuck and cannot be recovered
+			 * through the error handler. To fix this, use link
+			 * recovery instead of the error handler.
+			 */
+			ret = ufshcd_link_recovery(hba);
+			if (ret)
+				goto vendor_suspend;
 		}
 	} else if (ufshcd_is_link_off(hba)) {
 		/*