diff options
| author | Mehmet Fide <mehmet.fide@screeningeagle.com> | 2026-10-05 09:22:09 +0200 |
|---|---|---|
| committer | Jeff Johnson <jeff.johnson@oss.qualcomm.com> | 2026-10-26 17:30:47 -0700 |
| commit | 5c1b202d67a212c87e7389aaa093ce77828fa98f (patch) | |
| tree | f4dc4e5aa720f3b7f99613efa2ca9b84500111a0 /drivers | |
| parent | dda63dd136ba2bc3b297079b190ac81a0aea40ae (diff) | |
wifi: ath9k_htc: start ANI when an AP interface begins to beacon
ath9k_htc_vif_reconfig() re-arms ANI after a channel change when an AP
interface beacons. mac80211 configures the channel before it enables
the beacon, so during a normal AP start that never triggers, and the
start from add_interface that the previous patch removed was cancelled
by the same channel configuration: with hostapd, ANI and the periodic
calibration it drives did not run in AP mode until a later channel
change.
Start ANI when the beacon is enabled. The channel and its calibration
data are in place by then, which is the state vif_reconfig() re-arms
it in, and remove_interface() already stops it with the last AP
interface.
Fixes: a236254c35f0 ("ath9k_htc: Add ANI for AP mode")
Signed-off-by: Mehmet Fide <mehmet.fide@screeningeagle.com>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Link: https://patch.msgid.link/20261005072209.4101009-3-mehmet.fide@gmail.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/net/wireless/ath/ath9k/htc_drv_main.c | 3 |
1 files changed, 3 insertions, 0 deletions
diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_main.c b/drivers/net/wireless/ath/ath9k/htc_drv_main.c index a86dd28b0ab7..6578114a4019 100644 --- a/drivers/net/wireless/ath/ath9k/htc_drv_main.c +++ b/drivers/net/wireless/ath/ath9k/htc_drv_main.c @@ -1551,6 +1551,9 @@ static void ath9k_htc_bss_info_changed(struct ieee80211_hw *hw, ath9k_htc_set_tsfadjust(priv, vif); priv->cur_beacon_conf.enable_beacon = 1; ath9k_htc_beacon_config(priv, vif); + if (priv->ah->opmode == NL80211_IFTYPE_AP && + !test_bit(ATH_OP_ANI_RUN, &common->op_flags)) + ath9k_htc_start_ani(priv); } if ((changed & BSS_CHANGED_BEACON_ENABLED) && !bss_conf->enable_beacon) { |
