Merge tag 'arm-soc-fixes-v5.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC fixes from Arnd Bergmann:
 "These are the current arm-soc bug fixes for linux-5.11. I already
  merged a larger set that just came in during the past three days but
  has not had much exposure in linux-next, but this is the subset I
  merged last week.

  Most of these are for the NXP i.MX platform (descriptions from their
  pull request):

   - Fix pcf2127 reset for imx7d-flex-concentrator board.
   - Fix i.MX6 suspend with Thumb-2 kernel.
   - Fix ethernet-phy address issue on imx6qdl-sr-som board.
   - Fix GPIO3 `gpio-ranges` on i.MX8MP.
   - Select SOC_BUS for IMX_SCU driver to fix build issue.
   - Fix backlight pwm on imx6qdl-kontron-samx6i which is lost from
     #pwm-cells conversion.
   - Fix duplicated bus node name for i.MX8MN SoC.
   - Fix reset register offset on LS1028A SoC.
   - Rename MMC node aliases for imx6q-tbs2910 to keep the MMC device
     index consistent with previous kernel version.
   - Selecting ARM_GIC_V3 on non-CP15 processors to fix one build
     failure with i.MX8M SoC driver.
   - Fix typos with status property on imx6qdl-kontron-samx6i board.
   - Fix duplicated regulator-name on imx6qdl-gw52xx board.

  Aside from i.MX, the bugfixes are all over the place:

   - Coccinelle found a refcount imbalance on integrator
   - defconfig fix for TI K3
   - A boot regression fix for ST ux500
   - A code preemption fix for the optee driver
   - USB DMA regression on Broadcom Stingray
   - A bogus boot time warning fix for at91 code"

* tag 'arm-soc-fixes-v5.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  MAINTAINERS: Include bcm2835 subsequents into search
  arm64: dts: broadcom: Fix USB DMA address translation for Stingray
  drivers: soc: atmel: add null entry at the end of at91_soc_allowed_list[]
  drivers: soc: atmel: Avoid calling at91_soc_init on non AT91 SoCs
  tee: optee: replace might_sleep with cond_resched
  firmware: imx: select SOC_BUS to fix firmware build
  arm64: dts: imx8mp: Correct the gpio ranges of gpio3
  ARM: dts: imx6qdl-sr-som: fix some cubox-i platforms
  ARM: imx: build suspend-imx6.S with arm instruction set
  ARM: dts: imx7d-flex-concentrator: fix pcf2127 reset
  ARM: dts: ux500: Reserve memory carveouts
  arm64: defconfig: Drop unused K3 SoC specific options
  bus: arm-integrator-lm: Add of_node_put() before return statement
  ARM: dts: imx6qdl-gw52xx: fix duplicate regulator naming
  ARM: dts: imx6qdl-kontron-samx6i: fix i2c_lcd/cam default status
  ARM: imx: fix imx8m dependencies
  ARM: dts: tbs2910: rename MMC node aliases
  arm64: dts: ls1028a: fix the offset of the reset register
  arm64: dts: imx8mn: Fix duplicate node name
  ARM: dts: imx6qdl-kontron-samx6i: fix pwms for lcd-backlight

5 files changed, 19 insertions, 2 deletions

diff --git a/drivers/bus/arm-integrator-lm.c b/drivers/bus/arm-integrator-lm.c
index 845b6c43fef8..2344d560b144 100644
--- a/drivers/bus/arm-integrator-lm.c
+++ b/drivers/bus/arm-integrator-lm.c
@@ -54,6 +54,7 @@ static int integrator_lm_populate(int num, struct device *dev)
 			ret = of_platform_default_populate(child, NULL, dev);
 			if (ret) {
 				dev_err(dev, "failed to populate module\n");
+				of_node_put(child);
 				return ret;
 			}
 		}
diff --git a/drivers/firmware/imx/Kconfig b/drivers/firmware/imx/Kconfig
index 1d2e5b85d7ca..c027d99f2a59 100644
--- a/drivers/firmware/imx/Kconfig
+++ b/drivers/firmware/imx/Kconfig
@@ -13,6 +13,7 @@ config IMX_DSP
 config IMX_SCU
 	bool "IMX SCU Protocol driver"
 	depends on IMX_MBOX
+	select SOC_BUS
 	help
 	  The System Controller Firmware (SCFW) is a low-level system function
 	  which runs on a dedicated Cortex-M core to provide power, clock, and
diff --git a/drivers/soc/atmel/soc.c b/drivers/soc/atmel/soc.c
index c4472b68b7c2..698d21f50516 100644
--- a/drivers/soc/atmel/soc.c
+++ b/drivers/soc/atmel/soc.c
@@ -271,8 +271,21 @@ struct soc_device * __init at91_soc_init(const struct at91_soc *socs)
 	return soc_dev;
 }
 
+static const struct of_device_id at91_soc_allowed_list[] __initconst = {
+	{ .compatible = "atmel,at91rm9200", },
+	{ .compatible = "atmel,at91sam9", },
+	{ .compatible = "atmel,sama5", },
+	{ .compatible = "atmel,samv7", },
+	{ }
+};
+
 static int __init atmel_soc_device_init(void)
 {
+	struct device_node *np = of_find_node_by_path("/");
+
+	if (!of_match_node(at91_soc_allowed_list, np))
+		return 0;
+
 	at91_soc_init(socs);
 
 	return 0;
diff --git a/drivers/soc/imx/Kconfig b/drivers/soc/imx/Kconfig
index a9370f4aacca..05812f8ae734 100644
--- a/drivers/soc/imx/Kconfig
+++ b/drivers/soc/imx/Kconfig
@@ -13,7 +13,7 @@ config SOC_IMX8M
 	depends on ARCH_MXC || COMPILE_TEST
 	default ARCH_MXC && ARM64
 	select SOC_BUS
-	select ARM_GIC_V3 if ARCH_MXC
+	select ARM_GIC_V3 if ARCH_MXC && ARCH_MULTI_V7
 	help
 	  If you say yes here you get support for the NXP i.MX8M family
 	  support, it will provide the SoC info like SoC family,
diff --git a/drivers/tee/optee/call.c b/drivers/tee/optee/call.c
index c981757ba0d4..780d7c4fd756 100644
--- a/drivers/tee/optee/call.c
+++ b/drivers/tee/optee/call.c
@@ -7,6 +7,7 @@
 #include <linux/err.h>
 #include <linux/errno.h>
 #include <linux/mm.h>
+#include <linux/sched.h>
 #include <linux/slab.h>
 #include <linux/tee_drv.h>
 #include <linux/types.h>
@@ -148,7 +149,8 @@ u32 optee_do_call_with_arg(struct tee_context *ctx, phys_addr_t parg)
 			 */
 			optee_cq_wait_for_completion(&optee->call_queue, &w);
 		} else if (OPTEE_SMC_RETURN_IS_RPC(res.a0)) {
-			might_sleep();
+			if (need_resched())
+				cond_resched();
 			param.a0 = res.a0;
 			param.a1 = res.a1;
 			param.a2 = res.a2;