drm/hyperv: validate VMBus packet size in receive callback

hyperv_receive_sub() reads msg->vid_hdr.type and dispatches into one
of four message-type branches without knowing how many bytes the host
wrote into hv->recv_buf. The completion path then runs
memcpy(hv->init_buf, msg, VMBUS_MAX_PACKET_SIZE), so the consumer that
wakes on wait_for_completion_timeout() can read up to 16 KiB of
residue from a prior message as if it were the response payload.

Pass bytes_recvd into hyperv_receive_sub() and reject any packet that
does not cover the pipe + synthvid header. A single switch on
msg->vid_hdr.type then computes the type-specific payload size: the
three completion-driving types (SYNTHVID_VERSION_RESPONSE,
SYNTHVID_RESOLUTION_RESPONSE, SYNTHVID_VRAM_LOCATION_ACK) fall through
to a shared exit that requires that size before memcpy/complete, while
SYNTHVID_FEATURE_CHANGE validates its own payload and returns before
reading is_dirt_needed. Unknown types are dropped.

SYNTHVID_RESOLUTION_RESPONSE is variable length: the host fills
resolution_count entries, not the full SYNTHVID_MAX_RESOLUTION_COUNT
array. Validate the fixed prefix first so resolution_count can be
read, bound it against the array, then require only the count-sized
array, so the shorter responses the host actually sends are accepted.

Only run the sub-handler when vmbus_recvpacket() returned success. The
memcpy length is bytes_recvd, which is bounded by VMBUS_MAX_PACKET_SIZE
only on a successful receive; on -ENOBUFS vmbus_recvpacket() instead
reports the required length, which can exceed hv->recv_buf, so copying
bytes_recvd would read and write past the 16 KiB buffers. Gating on the
success return keeps the copy bounded. The nonzero-return path is itself
a malformed-message case and is now logged rather than silently skipped;
channel recovery is not attempted.

Rejected packets are reported via drm_err_ratelimited() rather than
silently dropped, matching the CoCo-hardened pattern in
hv_kvp_onchannelcallback().

Fixes: 76c56a5affeb ("drm/hyperv: Add DRM driver for hyperv synthetic video device")
Cc: stable@vger.kernel.org # 5.14+
Signed-off-by: Berkant Koc <me@berkoc.com>
Assisted-by: Claude:claude-opus-4-7 berkoc-pipeline
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Signed-off-by: Hamza Mahfooz <hamzamahfooz@linux.microsoft.com>
Link: https://patch.msgid.link/8200dbc199c7a9b75ac7e8af6c748d2189b5ebd5.1779542874.git.me@berkoc.com

1 files changed, 87 insertions, 13 deletions

diff --git a/drivers/gpu/drm/hyperv/hyperv_drm_proto.c b/drivers/gpu/drm/hyperv/hyperv_drm_proto.c
index c3d0ff229e3d..4e6f703a1b33 100644
--- a/drivers/gpu/drm/hyperv/hyperv_drm_proto.c
+++ b/drivers/gpu/drm/hyperv/hyperv_drm_proto.c
@@ -420,30 +420,92 @@ static int hyperv_get_supported_resolution(struct hv_device *hdev)
 	return 0;
 }
 
-static void hyperv_receive_sub(struct hv_device *hdev)
+static void hyperv_receive_sub(struct hv_device *hdev, u32 bytes_recvd)
 {
 	struct hyperv_drm_device *hv = hv_get_drvdata(hdev);
 	struct synthvid_msg *msg;
+	size_t hdr_size;
+	size_t need;
 
 	if (!hv)
 		return;
 
-	msg = (struct synthvid_msg *)hv->recv_buf;
-
-	/* Complete the wait event */
-	if (msg->vid_hdr.type == SYNTHVID_VERSION_RESPONSE ||
-	    msg->vid_hdr.type == SYNTHVID_RESOLUTION_RESPONSE ||
-	    msg->vid_hdr.type == SYNTHVID_VRAM_LOCATION_ACK) {
-		memcpy(hv->init_buf, msg, VMBUS_MAX_PACKET_SIZE);
-		complete(&hv->wait);
+	hdr_size = sizeof(struct pipe_msg_hdr) +
+		   sizeof(struct synthvid_msg_hdr);
+	if (bytes_recvd < hdr_size) {
+		drm_err_ratelimited(&hv->dev,
+				    "synthvid packet too small for header: %u\n",
+				    bytes_recvd);
 		return;
 	}
 
-	if (msg->vid_hdr.type == SYNTHVID_FEATURE_CHANGE) {
+	msg = (struct synthvid_msg *)hv->recv_buf;
+	need = hdr_size;
+
+	switch (msg->vid_hdr.type) {
+	case SYNTHVID_VERSION_RESPONSE:
+		need += sizeof(struct synthvid_version_resp);
+		break;
+	case SYNTHVID_RESOLUTION_RESPONSE:
+		/*
+		 * The resolution response is variable length: the host
+		 * fills resolution_count entries, not the full
+		 * SYNTHVID_MAX_RESOLUTION_COUNT array. Require the fixed
+		 * prefix first so resolution_count can be read, then
+		 * demand exactly the count-sized array.
+		 */
+		need += offsetof(struct synthvid_supported_resolution_resp,
+				 supported_resolution);
+		if (bytes_recvd < need)
+			break;
+		if (msg->resolution_resp.resolution_count >
+		    SYNTHVID_MAX_RESOLUTION_COUNT) {
+			drm_err_ratelimited(&hv->dev,
+					    "synthvid resolution count too large: %u\n",
+					    msg->resolution_resp.resolution_count);
+			return;
+		}
+		need += msg->resolution_resp.resolution_count *
+			sizeof(struct hvd_screen_info);
+		break;
+	case SYNTHVID_VRAM_LOCATION_ACK:
+		need += sizeof(struct synthvid_vram_location_ack);
+		break;
+	case SYNTHVID_FEATURE_CHANGE:
+		/*
+		 * Not a completion-driving message: validate its own payload
+		 * and consume it here rather than falling through to the
+		 * memcpy/complete shared by the wait-event responses.
+		 */
+		if (bytes_recvd < need +
+		    sizeof(struct synthvid_feature_change)) {
+			drm_err_ratelimited(&hv->dev,
+					    "synthvid feature change packet too small: %u\n",
+					    bytes_recvd);
+			return;
+		}
 		hv->dirt_needed = msg->feature_chg.is_dirt_needed;
 		if (hv->dirt_needed)
 			hyperv_hide_hw_ptr(hv->hdev);
+		return;
+	default:
+		return;
+	}
+
+	/*
+	 * Shared completion path for the wait-event responses
+	 * (VERSION_RESPONSE, RESOLUTION_RESPONSE, VRAM_LOCATION_ACK):
+	 * require the type-specific payload before handing the buffer to
+	 * the waiter.
+	 */
+	if (bytes_recvd < need) {
+		drm_err_ratelimited(&hv->dev,
+				    "synthvid packet too small for type %u: %u < %zu\n",
+				    msg->vid_hdr.type, bytes_recvd, need);
+		return;
 	}
+	memcpy(hv->init_buf, msg, bytes_recvd);
+	complete(&hv->wait);
 }
 
 static void hyperv_receive(void *ctx)
@@ -464,9 +526,21 @@ static void hyperv_receive(void *ctx)
 		ret = vmbus_recvpacket(hdev->channel, recv_buf,
 				       VMBUS_MAX_PACKET_SIZE,
 				       &bytes_recvd, &req_id);
-		if (bytes_recvd > 0 &&
-		    recv_buf->pipe_hdr.type == PIPE_MSG_DATA)
-			hyperv_receive_sub(hdev);
+		if (ret) {
+			/*
+			 * A nonzero return (e.g. -ENOBUFS for an oversized
+			 * packet) is itself a malformed message: bytes_recvd
+			 * then reports the required length rather than a copied
+			 * payload, so it must not be forwarded to the
+			 * sub-handler. Channel recovery is not attempted.
+			 */
+			drm_err_ratelimited(&hv->dev,
+					    "vmbus_recvpacket failed: %d (need %u)\n",
+					    ret, bytes_recvd);
+		} else if (bytes_recvd > 0 &&
+			   recv_buf->pipe_hdr.type == PIPE_MSG_DATA) {
+			hyperv_receive_sub(hdev, bytes_recvd);
+		}
 	} while (bytes_recvd > 0 && ret == 0);
 }