net: stmmac: spelling corrections

Correct spelling as flagged by codespell.

Signed-off-by: Simon Horman <horms@kernel.org>
Reviewed-by: Joe Damato <joe@dama.to>
Link: https://patch.msgid.link/20260129-stmmac-spell-v1-1-c7df9a96e482@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

10 files changed, 17 insertions, 17 deletions

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-imx.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-imx.c
index 97de4726208e..ecc0c3483423 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-imx.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-imx.c
@@ -270,9 +270,9 @@ imx_dwmac_parse_dt(struct imx_priv_data *dwmac, struct device *dev)
 	if (of_machine_is_compatible("fsl,imx8mp") ||
 	    of_machine_is_compatible("fsl,imx91") ||
 	    of_machine_is_compatible("fsl,imx93")) {
-		/* Binding doc describes the propety:
+		/* Binding doc describes the property:
 		 * is required by i.MX8MP, i.MX91, i.MX93.
-		 * is optinoal for i.MX8DXL.
+		 * is optional for i.MX8DXL.
 		 */
 		dwmac->intf_regmap =
 			syscon_regmap_lookup_by_phandle_args(np, "intf_mode", 1,
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
index 8aa496ac85cc..c01b86fd64da 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
@@ -746,7 +746,7 @@ static int sun8i_dwmac_reset(struct stmmac_priv *priv)
 	v = readl(priv->ioaddr + EMAC_BASIC_CTL1);
 	writel(v | 0x01, priv->ioaddr + EMAC_BASIC_CTL1);
 
-	/* The timeout was previoulsy set to 10ms, but some board (OrangePI0)
+	/* The timeout was previously set to 10ms, but some board (OrangePI0)
 	 * need more if no cable plugged. 100ms seems OK
 	 */
 	err = readl_poll_timeout(priv->ioaddr + EMAC_BASIC_CTL1, v,
@@ -821,7 +821,7 @@ static int sun8i_dwmac_power_internal_phy(struct stmmac_priv *priv)
 		return ret;
 	}
 
-	/* Make sure the EPHY is properly reseted, as U-Boot may leave
+	/* Make sure the EPHY is properly reset, as U-Boot may leave
 	 * it at deasserted state, and thus it may fail to reset EMAC.
 	 *
 	 * This assumes the driver has exclusive access to the EPHY reset.
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac1000.h b/drivers/net/ethernet/stmicro/stmmac/dwmac1000.h
index b3135df0a359..9fe639fb06bb 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac1000.h
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac1000.h
@@ -152,7 +152,7 @@ enum inter_frame_gap {
 
 /*--- DMA BLOCK defines ---*/
 /* DMA Bus Mode register defines */
-/* Programmable burst length (passed thorugh platform)*/
+/* Programmable burst length (passed through platform)*/
 #define DMA_BUS_MODE_PBL_MASK	GENMASK(13, 8)	/* Programmable Burst Len */
 #define DMA_BUS_MODE_ATDS	0x00000080	/* Alternate Descriptor Size */
 
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac100_core.c b/drivers/net/ethernet/stmicro/stmmac/dwmac100_core.c
index 4efe4c3ae5dc..db4fbe64a38a 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac100_core.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac100_core.c
@@ -108,7 +108,7 @@ static void dwmac100_set_filter(struct mac_device_info *hw,
 		memset(mc_filter, 0, sizeof(mc_filter));
 		netdev_for_each_mc_addr(ha, dev) {
 			/* The upper 6 bits of the calculated CRC are used to
-			 * index the contens of the hash table
+			 * index the contents of the hash table
 			 */
 			int bit_nr = ether_crc(ETH_ALEN, ha->addr) >> 26;
 			/* The most significant bit determines the register to
diff --git a/drivers/net/ethernet/stmicro/stmmac/enh_desc.c b/drivers/net/ethernet/stmicro/stmmac/enh_desc.c
index d571241e64dd..8f6993c8bcae 100644
--- a/drivers/net/ethernet/stmicro/stmmac/enh_desc.c
+++ b/drivers/net/ethernet/stmicro/stmmac/enh_desc.c
@@ -88,7 +88,7 @@ static int enh_desc_coe_rdes0(int ipc_err, int type, int payload_err)
 
 	/* bits 5 7 0 | Frame status
 	 * ----------------------------------------------------------
-	 *      0 0 0 | IEEE 802.3 Type frame (length < 1536 octects)
+	 *      0 0 0 | IEEE 802.3 Type frame (length < 1536 octets)
 	 *      1 0 0 | IPv4/6 No CSUM errorS.
 	 *      1 0 1 | IPv4/6 CSUM PAYLOAD error
 	 *      1 1 0 | IPv4/6 CSUM IP HR error
diff --git a/drivers/net/ethernet/stmicro/stmmac/mmc_core.c b/drivers/net/ethernet/stmicro/stmmac/mmc_core.c
index 0fab842902a8..1b3b114e7bec 100644
--- a/drivers/net/ethernet/stmicro/stmmac/mmc_core.c
+++ b/drivers/net/ethernet/stmicro/stmmac/mmc_core.c
@@ -252,7 +252,7 @@ static void dwmac_mmc_intr_all_mask(void __iomem *mmcaddr)
 	writel(MMC_DEFAULT_MASK, mmcaddr + MMC_RX_IPC_INTR_MASK);
 }
 
-/* This reads the MAC core counters (if actaully supported).
+/* This reads the MAC core counters (if actually supported).
  * by default the MMC core is programmed to reset each
  * counter after a read. So all the field of the mmc struct
  * have to be incremented.
@@ -420,7 +420,7 @@ static void dwxgmac_read_mmc_reg(void __iomem *addr, u32 reg, u32 *dest)
 		*dest = *dest + tmp;
 }
 
-/* This reads the MAC core counters (if actaully supported).
+/* This reads the MAC core counters (if actually supported).
  * by default the MMC core is programmed to reset each
  * counter after a read. So all the field of the mmc struct
  * have to be incremented.
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_hwtstamp.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_hwtstamp.c
index bb110124f21e..b9a985fa772c 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_hwtstamp.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_hwtstamp.c
@@ -43,7 +43,7 @@ static void config_sub_second_increment(void __iomem *ioaddr,
 	unsigned long data;
 	u32 reg_value;
 
-	/* For GMAC3.x, 4.x versions, in "fine adjustement mode" set sub-second
+	/* For GMAC3.x, 4.x versions, in "fine adjustment mode" set sub-second
 	 * increment to twice the number of nanoseconds of a clock cycle.
 	 * The calculation of the default_addend value by the caller will set it
 	 * to mid-range = 2^31 when the remainder of this division is zero,
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 788b884f9c89..7a451ae19f50 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -1130,7 +1130,7 @@ static int stmmac_mac_enable_tx_lpi(struct phylink_config *config, u32 timer,
 	stmmac_set_eee_timer(priv, priv->hw, STMMAC_DEFAULT_LIT_LS,
 			     STMMAC_DEFAULT_TWT_LS);
 
-	/* Try to cnfigure the hardware timer. */
+	/* Try to configure the hardware timer. */
 	ret = stmmac_set_lpi_mode(priv, priv->hw, STMMAC_LPI_TIMER,
 				  priv->tx_lpi_clk_stop, priv->tx_lpi_timer);
 
@@ -3511,7 +3511,7 @@ static void stmmac_mac_config_rss(struct stmmac_priv *priv)
 /**
  *  stmmac_mtl_configuration - Configure MTL
  *  @priv: driver private structure
- *  Description: It is used for configurring MTL
+ *  Description: It is used for configuring MTL
  */
 static void stmmac_mtl_configuration(struct stmmac_priv *priv)
 {
@@ -4389,7 +4389,7 @@ static netdev_tx_t stmmac_tso_xmit(struct sk_buff *skb, struct net_device *dev)
 
 	/* Always insert VLAN tag to SKB payload for TSO frames.
 	 *
-	 * Never insert VLAN tag by HW, since segments splited by
+	 * Never insert VLAN tag by HW, since segments split by
 	 * TSO engine will be un-tagged by mistake.
 	 */
 	if (skb_vlan_tag_present(skb)) {
@@ -5962,7 +5962,7 @@ static int stmmac_napi_poll_rxtx(struct napi_struct *napi, int budget)
 		unsigned long flags;
 
 		spin_lock_irqsave(&ch->lock, flags);
-		/* Both RX and TX work done are compelte,
+		/* Both RX and TX work done are complete,
 		 * so enable both RX & TX IRQs.
 		 */
 		stmmac_enable_dma_irq(priv, priv->ioaddr, chan, 1, 1);
@@ -6294,7 +6294,7 @@ static irqreturn_t stmmac_msi_intr_rx(int irq, void *data)
 /**
  *  stmmac_ioctl - Entry point for the Ioctl
  *  @dev: Device pointer.
- *  @rq: An IOCTL specefic structure, that can contain a pointer to
+ *  @rq: An IOCTL specific structure, that can contain a pointer to
  *  a proprietary structure used to pass information to the driver.
  *  @cmd: IOCTL command
  *  Description:
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
index 1e82850f2a25..a7c2496b39f2 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
@@ -483,7 +483,7 @@ void stmmac_pcs_clean(struct net_device *ndev)
  *	If a specific clk_csr value is passed from the platform
  *	this means that the CSR Clock Range selection cannot be
  *	changed at run-time and it is fixed (as reported in the driver
- *	documentation). Viceversa the driver will try to set the MDC
+ *	documentation). Vice versa the driver will try to set the MDC
  *	clock dynamically according to the actual clock input.
  */
 static u32 stmmac_clk_csr_set(struct stmmac_priv *priv)
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_selftests.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_selftests.c
index e90a2c469b9a..08b60b7d5fd6 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_selftests.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_selftests.c
@@ -2000,7 +2000,7 @@ void stmmac_selftest_run(struct net_device *dev,
 		}
 
 		/*
-		 * First tests will always be MAC / PHY loobpack. If any of
+		 * First tests will always be MAC / PHY loopback. If any of
 		 * them is not supported we abort earlier.
 		 */
 		if (ret) {