Merge tag 'mmc-v6.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc

Pull MMC fixes from Ulf Hansson:

 - rtsx_pci_sdmmc: Fix signal voltage switch

 - sdhci-of-dwcmshc:
     - A couple of fixes for Eswin EIC7700
     - Fix support for HS200/HS400 mode

* tag 'mmc-v6.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
  mmc: sdhci-of-dwcmshc: Fix DMA 128MB boundary for Eswin EIC7700
  mmc: sdhci-of-dwcmshc: Fix init for AXI clock for Eswin EIC7700
  mmc: rtsx_pci_sdmmc: implement sdmmc_card_busy function
  mmc: sdhci-of-dwcmshc: Prevent illegal clock reduction in HS200/HS400 mode

2 files changed, 55 insertions, 0 deletions

diff --git a/drivers/mmc/host/rtsx_pci_sdmmc.c b/drivers/mmc/host/rtsx_pci_sdmmc.c
index dc2587ff8519..4db3328f46df 100644
--- a/drivers/mmc/host/rtsx_pci_sdmmc.c
+++ b/drivers/mmc/host/rtsx_pci_sdmmc.c
@@ -1306,6 +1306,46 @@ out:
 	return err;
 }
 
+static int sdmmc_card_busy(struct mmc_host *mmc)
+{
+	struct realtek_pci_sdmmc *host = mmc_priv(mmc);
+	struct rtsx_pcr *pcr = host->pcr;
+	int err;
+	u8 stat;
+	u8 mask = SD_DAT3_STATUS | SD_DAT2_STATUS | SD_DAT1_STATUS
+	| SD_DAT0_STATUS;
+
+	mutex_lock(&pcr->pcr_mutex);
+
+	rtsx_pci_start_run(pcr);
+
+	err = rtsx_pci_write_register(pcr, SD_BUS_STAT,
+				      SD_CLK_TOGGLE_EN | SD_CLK_FORCE_STOP,
+			       SD_CLK_TOGGLE_EN);
+	if (err)
+		goto out;
+
+	mdelay(1);
+
+	err = rtsx_pci_read_register(pcr, SD_BUS_STAT, &stat);
+	if (err)
+		goto out;
+
+	err = rtsx_pci_write_register(pcr, SD_BUS_STAT,
+				      SD_CLK_TOGGLE_EN | SD_CLK_FORCE_STOP, 0);
+out:
+	mutex_unlock(&pcr->pcr_mutex);
+
+	if (err)
+		return err;
+
+	/* check if any pin between dat[0:3] is low */
+	if ((stat & mask) != mask)
+		return 1;
+	else
+		return 0;
+}
+
 static int sdmmc_execute_tuning(struct mmc_host *mmc, u32 opcode)
 {
 	struct realtek_pci_sdmmc *host = mmc_priv(mmc);
@@ -1418,6 +1458,7 @@ static const struct mmc_host_ops realtek_pci_sdmmc_ops = {
 	.get_ro = sdmmc_get_ro,
 	.get_cd = sdmmc_get_cd,
 	.start_signal_voltage_switch = sdmmc_switch_voltage,
+	.card_busy = sdmmc_card_busy,
 	.execute_tuning = sdmmc_execute_tuning,
 	.init_sd_express = sdmmc_init_sd_express,
 };
diff --git a/drivers/mmc/host/sdhci-of-dwcmshc.c b/drivers/mmc/host/sdhci-of-dwcmshc.c
index 51949cde0958..2b75a36c096b 100644
--- a/drivers/mmc/host/sdhci-of-dwcmshc.c
+++ b/drivers/mmc/host/sdhci-of-dwcmshc.c
@@ -739,6 +739,13 @@ static void dwcmshc_rk3568_set_clock(struct sdhci_host *host, unsigned int clock
 	sdhci_writel(host, extra, reg);
 
 	if (clock <= 52000000) {
+		if (host->mmc->ios.timing == MMC_TIMING_MMC_HS200 ||
+		    host->mmc->ios.timing == MMC_TIMING_MMC_HS400) {
+			dev_err(mmc_dev(host->mmc),
+				"Can't reduce the clock below 52MHz in HS200/HS400 mode");
+			return;
+		}
+
 		/*
 		 * Disable DLL and reset both of sample and drive clock.
 		 * The bypass bit and start bit need to be set if DLL is not locked.
@@ -1588,6 +1595,7 @@ static int eic7700_init(struct device *dev, struct sdhci_host *host, struct dwcm
 {
 	u32 emmc_caps = MMC_CAP2_NO_SD | MMC_CAP2_NO_SDIO;
 	unsigned int val, hsp_int_status, hsp_pwr_ctrl;
+	static const char * const clk_ids[] = {"axi"};
 	struct of_phandle_args args;
 	struct eic7700_priv *priv;
 	struct regmap *hsp_regmap;
@@ -1605,6 +1613,11 @@ static int eic7700_init(struct device *dev, struct sdhci_host *host, struct dwcm
 		return ret;
 	}
 
+	ret = dwcmshc_get_enable_other_clks(mmc_dev(host->mmc), dwc_priv,
+					    ARRAY_SIZE(clk_ids), clk_ids);
+	if (ret)
+		return ret;
+
 	ret = of_parse_phandle_with_fixed_args(dev->of_node, "eswin,hsp-sp-csr", 2, 0, &args);
 	if (ret) {
 		dev_err(dev, "Fail to parse 'eswin,hsp-sp-csr' phandle (%d)\n", ret);
@@ -1726,6 +1739,7 @@ static const struct sdhci_ops sdhci_dwcmshc_eic7700_ops = {
 	.set_uhs_signaling = sdhci_eic7700_set_uhs_wrapper,
 	.set_power = sdhci_set_power_and_bus_voltage,
 	.irq = dwcmshc_cqe_irq_handler,
+	.adma_write_desc = dwcmshc_adma_write_desc,
 	.platform_execute_tuning = sdhci_eic7700_executing_tuning,
 };