Merge tag 'omap-for-v4.1/wl12xx-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt

Merge "wireless wl12xx and omap device tree changes for v4.1" from Tony
Lindgren:

Wireless and omap changes to make wl12xx driver to use device tree
data instead of platform data from Eliad Peller <eliad@wizery.com>:

- Add device-tree support to the wlcore (wl12xx/wl18xx) driver.

- Update the current users to use the bindings instead of pdata-quirks.

- Finally, remove the deprecated wl12xx_platform_data struct

Note that da850 board file code that still uses the platform data,
but we have da850.dtsi that can be used instead. So it was decided
that we should try to remove the wl12xx support from the da850
board file as suggested by Sekhar Nori <nsekhar@ti.com>. As it's
the last patch in the series, the last patch can be simply reverted
if needed.

As this series touches quite a bit of arch code, it was suggested
by Kalle Valo <kvalo@codeaurora.org> that the whole series should
be merged via the arm-soc tree.

* tag 'omap-for-v4.1/wl12xx-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  wlcore: remove wl12xx_platform_data
  ARM: dts: add wl12xx/wl18xx bindings
  wlcore: add device-tree support
  dt: bindings: add TI's wilink wireless device
  wl12xx: use frequency instead of enumerations for pdata clocks
  wlcore: set irq_trigger in board files instead of hiding behind a quirk
  + Linux 4.0-rc4

Signed-off-by: Olof Johansson <olof@lixom.net>

1 files changed, 56 insertions, 31 deletions

diff --git a/fs/btrfs/file.c b/fs/btrfs/file.c
index b78bbbac900d..30982bbd31c3 100644
--- a/fs/btrfs/file.c
+++ b/fs/btrfs/file.c
@@ -1811,22 +1811,10 @@ static ssize_t btrfs_file_write_iter(struct kiocb *iocb,
 	mutex_unlock(&inode->i_mutex);
 
 	/*
-	 * we want to make sure fsync finds this change
-	 * but we haven't joined a transaction running right now.
-	 *
-	 * Later on, someone is sure to update the inode and get the
-	 * real transid recorded.
-	 *
-	 * We set last_trans now to the fs_info generation + 1,
-	 * this will either be one more than the running transaction
-	 * or the generation used for the next transaction if there isn't
-	 * one running right now.
-	 *
 	 * We also have to set last_sub_trans to the current log transid,
 	 * otherwise subsequent syncs to a file that's been synced in this
 	 * transaction will appear to have already occured.
 	 */
-	BTRFS_I(inode)->last_trans = root->fs_info->generation + 1;
 	BTRFS_I(inode)->last_sub_trans = root->log_transid;
 	if (num_written > 0) {
 		err = generic_write_sync(file, pos, num_written);
@@ -1959,25 +1947,37 @@ int btrfs_sync_file(struct file *file, loff_t start, loff_t end, int datasync)
 	atomic_inc(&root->log_batch);
 
 	/*
-	 * check the transaction that last modified this inode
-	 * and see if its already been committed
-	 */
-	if (!BTRFS_I(inode)->last_trans) {
-		mutex_unlock(&inode->i_mutex);
-		goto out;
-	}
-
-	/*
-	 * if the last transaction that changed this file was before
-	 * the current transaction, we can bail out now without any
-	 * syncing
+	 * If the last transaction that changed this file was before the current
+	 * transaction and we have the full sync flag set in our inode, we can
+	 * bail out now without any syncing.
+	 *
+	 * Note that we can't bail out if the full sync flag isn't set. This is
+	 * because when the full sync flag is set we start all ordered extents
+	 * and wait for them to fully complete - when they complete they update
+	 * the inode's last_trans field through:
+	 *
+	 *     btrfs_finish_ordered_io() ->
+	 *         btrfs_update_inode_fallback() ->
+	 *             btrfs_update_inode() ->
+	 *                 btrfs_set_inode_last_trans()
+	 *
+	 * So we are sure that last_trans is up to date and can do this check to
+	 * bail out safely. For the fast path, when the full sync flag is not
+	 * set in our inode, we can not do it because we start only our ordered
+	 * extents and don't wait for them to complete (that is when
+	 * btrfs_finish_ordered_io runs), so here at this point their last_trans
+	 * value might be less than or equals to fs_info->last_trans_committed,
+	 * and setting a speculative last_trans for an inode when a buffered
+	 * write is made (such as fs_info->generation + 1 for example) would not
+	 * be reliable since after setting the value and before fsync is called
+	 * any number of transactions can start and commit (transaction kthread
+	 * commits the current transaction periodically), and a transaction
+	 * commit does not start nor waits for ordered extents to complete.
 	 */
 	smp_mb();
 	if (btrfs_inode_in_log(inode, root->fs_info->generation) ||
-	    BTRFS_I(inode)->last_trans <=
-	    root->fs_info->last_trans_committed) {
-		BTRFS_I(inode)->last_trans = 0;
-
+	    (full_sync && BTRFS_I(inode)->last_trans <=
+	     root->fs_info->last_trans_committed)) {
 		/*
 		 * We'v had everything committed since the last time we were
 		 * modified so clear this flag in case it was set for whatever
@@ -2275,6 +2275,8 @@ static int btrfs_punch_hole(struct inode *inode, loff_t offset, loff_t len)
 	bool same_page;
 	bool no_holes = btrfs_fs_incompat(root->fs_info, NO_HOLES);
 	u64 ino_size;
+	bool truncated_page = false;
+	bool updated_inode = false;
 
 	ret = btrfs_wait_ordered_range(inode, offset, len);
 	if (ret)
@@ -2306,13 +2308,18 @@ static int btrfs_punch_hole(struct inode *inode, loff_t offset, loff_t len)
 	 * entire page.
 	 */
 	if (same_page && len < PAGE_CACHE_SIZE) {
-		if (offset < ino_size)
+		if (offset < ino_size) {
+			truncated_page = true;
 			ret = btrfs_truncate_page(inode, offset, len, 0);
+		} else {
+			ret = 0;
+		}
 		goto out_only_mutex;
 	}
 
 	/* zero back part of the first page */
 	if (offset < ino_size) {
+		truncated_page = true;
 		ret = btrfs_truncate_page(inode, offset, 0, 0);
 		if (ret) {
 			mutex_unlock(&inode->i_mutex);
@@ -2348,6 +2355,7 @@ static int btrfs_punch_hole(struct inode *inode, loff_t offset, loff_t len)
 		if (!ret) {
 			/* zero the front end of the last page */
 			if (tail_start + tail_len < ino_size) {
+				truncated_page = true;
 				ret = btrfs_truncate_page(inode,
 						tail_start + tail_len, 0, 1);
 				if (ret)
@@ -2357,8 +2365,8 @@ static int btrfs_punch_hole(struct inode *inode, loff_t offset, loff_t len)
 	}
 
 	if (lockend < lockstart) {
-		mutex_unlock(&inode->i_mutex);
-		return 0;
+		ret = 0;
+		goto out_only_mutex;
 	}
 
 	while (1) {
@@ -2506,6 +2514,7 @@ out_trans:
 
 	trans->block_rsv = &root->fs_info->trans_block_rsv;
 	ret = btrfs_update_inode(trans, root, inode);
+	updated_inode = true;
 	btrfs_end_transaction(trans, root);
 	btrfs_btree_balance_dirty(root);
 out_free:
@@ -2515,6 +2524,22 @@ out:
 	unlock_extent_cached(&BTRFS_I(inode)->io_tree, lockstart, lockend,
 			     &cached_state, GFP_NOFS);
 out_only_mutex:
+	if (!updated_inode && truncated_page && !ret && !err) {
+		/*
+		 * If we only end up zeroing part of a page, we still need to
+		 * update the inode item, so that all the time fields are
+		 * updated as well as the necessary btrfs inode in memory fields
+		 * for detecting, at fsync time, if the inode isn't yet in the
+		 * log tree or it's there but not up to date.
+		 */
+		trans = btrfs_start_transaction(root, 1);
+		if (IS_ERR(trans)) {
+			err = PTR_ERR(trans);
+		} else {
+			err = btrfs_update_inode(trans, root, inode);
+			ret = btrfs_end_transaction(trans, root);
+		}
+	}
 	mutex_unlock(&inode->i_mutex);
 	if (ret && !err)
 		err = ret;