BackMerge tag 'v6.19-rc7' into drm-next

Linux 6.19-rc7

This is needed for msm and rust trees.

Signed-off-by: Dave Airlie <airlied@redhat.com>

5 files changed, 140 insertions, 207 deletions

diff --git a/include/drm/bridge/dw_hdmi_qp.h b/include/drm/bridge/dw_hdmi_qp.h
index 3f461f6b9bbf..3af12f82da2c 100644
--- a/include/drm/bridge/dw_hdmi_qp.h
+++ b/include/drm/bridge/dw_hdmi_qp.h
@@ -34,5 +34,6 @@ struct dw_hdmi_qp_plat_data {
 struct dw_hdmi_qp *dw_hdmi_qp_bind(struct platform_device *pdev,
 				   struct drm_encoder *encoder,
 				   const struct dw_hdmi_qp_plat_data *plat_data);
+void dw_hdmi_qp_suspend(struct device *dev, struct dw_hdmi_qp *hdmi);
 void dw_hdmi_qp_resume(struct device *dev, struct dw_hdmi_qp *hdmi);
 #endif /* __DW_HDMI_QP__ */
diff --git a/include/drm/display/drm_dp_helper.h b/include/drm/display/drm_dp_helper.h
index 85e868238e28..1d0acd58f486 100644
--- a/include/drm/display/drm_dp_helper.h
+++ b/include/drm/display/drm_dp_helper.h
@@ -555,6 +555,22 @@ ssize_t drm_dp_dpcd_write(struct drm_dp_aux *aux, unsigned int offset,
 			  void *buffer, size_t size);
 
 /**
+ * drm_dp_dpcd_readb() - read a single byte from the DPCD
+ * @aux: DisplayPort AUX channel
+ * @offset: address of the register to read
+ * @valuep: location where the value of the register will be stored
+ *
+ * Returns the number of bytes transferred (1) on success, or a negative
+ * error code on failure. In most of the cases you should be using
+ * drm_dp_dpcd_read_byte() instead.
+ */
+static inline ssize_t drm_dp_dpcd_readb(struct drm_dp_aux *aux,
+					unsigned int offset, u8 *valuep)
+{
+	return drm_dp_dpcd_read(aux, offset, valuep, 1);
+}
+
+/**
  * drm_dp_dpcd_read_data() - read a series of bytes from the DPCD
  * @aux: DisplayPort AUX channel (SST or MST)
  * @offset: address of the (first) register to read
@@ -573,12 +589,29 @@ static inline int drm_dp_dpcd_read_data(struct drm_dp_aux *aux,
 					void *buffer, size_t size)
 {
 	int ret;
+	size_t i;
+	u8 *buf = buffer;
 
 	ret = drm_dp_dpcd_read(aux, offset, buffer, size);
-	if (ret < 0)
-		return ret;
-	if (ret < size)
-		return -EPROTO;
+	if (ret >= 0) {
+		if (ret < size)
+			return -EPROTO;
+		return 0;
+	}
+
+	/*
+	 * Workaround for USB-C hubs/adapters with buggy firmware that fail
+	 * multi-byte AUX reads but work with single-byte reads.
+	 * Known affected devices:
+	 * - Lenovo USB-C to VGA adapter (VIA VL817, idVendor=17ef, idProduct=7217)
+	 * - Dell DA310 USB-C hub (idVendor=413c, idProduct=c010)
+	 * Attempt byte-by-byte reading as a fallback.
+	 */
+	for (i = 0; i < size; i++) {
+		ret = drm_dp_dpcd_readb(aux, offset + i, &buf[i]);
+		if (ret < 0)
+			return ret;
+	}
 
 	return 0;
 }
@@ -613,22 +646,6 @@ static inline int drm_dp_dpcd_write_data(struct drm_dp_aux *aux,
 }
 
 /**
- * drm_dp_dpcd_readb() - read a single byte from the DPCD
- * @aux: DisplayPort AUX channel
- * @offset: address of the register to read
- * @valuep: location where the value of the register will be stored
- *
- * Returns the number of bytes transferred (1) on success, or a negative
- * error code on failure. In most of the cases you should be using
- * drm_dp_dpcd_read_byte() instead.
- */
-static inline ssize_t drm_dp_dpcd_readb(struct drm_dp_aux *aux,
-					unsigned int offset, u8 *valuep)
-{
-	return drm_dp_dpcd_read(aux, offset, valuep, 1);
-}
-
-/**
  * drm_dp_dpcd_writeb() - write a single byte to the DPCD
  * @aux: DisplayPort AUX channel
  * @offset: address of the register to write
diff --git a/include/drm/drm_atomic_helper.h b/include/drm/drm_atomic_helper.h
index 53382fe93537..e154ee4f0696 100644
--- a/include/drm/drm_atomic_helper.h
+++ b/include/drm/drm_atomic_helper.h
@@ -60,6 +60,12 @@ int drm_atomic_helper_check_plane_state(struct drm_plane_state *plane_state,
 int drm_atomic_helper_check_planes(struct drm_device *dev,
 			       struct drm_atomic_state *state);
 int drm_atomic_helper_check_crtc_primary_plane(struct drm_crtc_state *crtc_state);
+void drm_atomic_helper_commit_encoder_bridge_disable(struct drm_device *dev,
+						     struct drm_atomic_state *state);
+void drm_atomic_helper_commit_crtc_disable(struct drm_device *dev,
+					   struct drm_atomic_state *state);
+void drm_atomic_helper_commit_encoder_bridge_post_disable(struct drm_device *dev,
+							  struct drm_atomic_state *state);
 int drm_atomic_helper_check(struct drm_device *dev,
 			    struct drm_atomic_state *state);
 void drm_atomic_helper_commit_tail(struct drm_atomic_state *state);
@@ -89,8 +95,24 @@ drm_atomic_helper_update_legacy_modeset_state(struct drm_device *dev,
 void
 drm_atomic_helper_calc_timestamping_constants(struct drm_atomic_state *state);
 
+void drm_atomic_helper_commit_crtc_set_mode(struct drm_device *dev,
+					    struct drm_atomic_state *state);
+
 void drm_atomic_helper_commit_modeset_disables(struct drm_device *dev,
 					       struct drm_atomic_state *state);
+
+void drm_atomic_helper_commit_writebacks(struct drm_device *dev,
+					 struct drm_atomic_state *state);
+
+void drm_atomic_helper_commit_encoder_bridge_pre_enable(struct drm_device *dev,
+							struct drm_atomic_state *state);
+
+void drm_atomic_helper_commit_crtc_enable(struct drm_device *dev,
+					  struct drm_atomic_state *state);
+
+void drm_atomic_helper_commit_encoder_bridge_enable(struct drm_device *dev,
+						    struct drm_atomic_state *state);
+
 void drm_atomic_helper_commit_modeset_enables(struct drm_device *dev,
 					  struct drm_atomic_state *old_state);
 
diff --git a/include/drm/drm_bridge.h b/include/drm/drm_bridge.h
index 73c23fece792..4f19f7064ee3 100644
--- a/include/drm/drm_bridge.h
+++ b/include/drm/drm_bridge.h
@@ -176,33 +176,17 @@ struct drm_bridge_funcs {
 	/**
 	 * @disable:
 	 *
-	 * The @disable callback should disable the bridge.
+	 * This callback should disable the bridge. It is called right before
+	 * the preceding element in the display pipe is disabled. If the
+	 * preceding element is a bridge this means it's called before that
+	 * bridge's @disable vfunc. If the preceding element is a &drm_encoder
+	 * it's called right before the &drm_encoder_helper_funcs.disable,
+	 * &drm_encoder_helper_funcs.prepare or &drm_encoder_helper_funcs.dpms
+	 * hook.
 	 *
 	 * The bridge can assume that the display pipe (i.e. clocks and timing
 	 * signals) feeding it is still running when this callback is called.
 	 *
-	 *
-	 * If the preceding element is a &drm_bridge, then this is called before
-	 * that bridge is disabled via one of:
-	 *
-	 * - &drm_bridge_funcs.disable
-	 * - &drm_bridge_funcs.atomic_disable
-	 *
-	 * If the preceding element of the bridge is a display controller, then
-	 * this callback is called before the encoder is disabled via one of:
-	 *
-	 * - &drm_encoder_helper_funcs.atomic_disable
-	 * - &drm_encoder_helper_funcs.prepare
-	 * - &drm_encoder_helper_funcs.disable
-	 * - &drm_encoder_helper_funcs.dpms
-	 *
-	 * and the CRTC is disabled via one of:
-	 *
-	 * - &drm_crtc_helper_funcs.prepare
-	 * - &drm_crtc_helper_funcs.atomic_disable
-	 * - &drm_crtc_helper_funcs.disable
-	 * - &drm_crtc_helper_funcs.dpms.
-	 *
 	 * The @disable callback is optional.
 	 *
 	 * NOTE:
@@ -215,34 +199,17 @@ struct drm_bridge_funcs {
 	/**
 	 * @post_disable:
 	 *
-	 * The bridge must assume that the display pipe (i.e. clocks and timing
-	 * signals) feeding this bridge is no longer running when the
-	 * @post_disable is called.
+	 * This callback should disable the bridge. It is called right after the
+	 * preceding element in the display pipe is disabled. If the preceding
+	 * element is a bridge this means it's called after that bridge's
+	 * @post_disable function. If the preceding element is a &drm_encoder
+	 * it's called right after the encoder's
+	 * &drm_encoder_helper_funcs.disable, &drm_encoder_helper_funcs.prepare
+	 * or &drm_encoder_helper_funcs.dpms hook.
 	 *
-	 * This callback should perform all the actions required by the hardware
-	 * after it has stopped receiving signals from the preceding element.
-	 *
-	 * If the preceding element is a &drm_bridge, then this is called after
-	 * that bridge is post-disabled (unless marked otherwise by the
-	 * @pre_enable_prev_first flag) via one of:
-	 *
-	 * - &drm_bridge_funcs.post_disable
-	 * - &drm_bridge_funcs.atomic_post_disable
-	 *
-	 * If the preceding element of the bridge is a display controller, then
-	 * this callback is called after the encoder is disabled via one of:
-	 *
-	 * - &drm_encoder_helper_funcs.atomic_disable
-	 * - &drm_encoder_helper_funcs.prepare
-	 * - &drm_encoder_helper_funcs.disable
-	 * - &drm_encoder_helper_funcs.dpms
-	 *
-	 * and the CRTC is disabled via one of:
-	 *
-	 * - &drm_crtc_helper_funcs.prepare
-	 * - &drm_crtc_helper_funcs.atomic_disable
-	 * - &drm_crtc_helper_funcs.disable
-	 * - &drm_crtc_helper_funcs.dpms
+	 * The bridge must assume that the display pipe (i.e. clocks and timing
+	 * signals) feeding it is no longer running when this callback is
+	 * called.
 	 *
 	 * The @post_disable callback is optional.
 	 *
@@ -285,30 +252,18 @@ struct drm_bridge_funcs {
 	/**
 	 * @pre_enable:
 	 *
-	 * The display pipe (i.e. clocks and timing signals) feeding this bridge
-	 * will not yet be running when the @pre_enable is called.
-	 *
-	 * This callback should perform all the necessary actions to prepare the
-	 * bridge to accept signals from the preceding element.
-	 *
-	 * If the preceding element is a &drm_bridge, then this is called before
-	 * that bridge is pre-enabled (unless marked otherwise by
-	 * @pre_enable_prev_first flag) via one of:
-	 *
-	 * - &drm_bridge_funcs.pre_enable
-	 * - &drm_bridge_funcs.atomic_pre_enable
-	 *
-	 * If the preceding element of the bridge is a display controller, then
-	 * this callback is called before the CRTC is enabled via one of:
-	 *
-	 * - &drm_crtc_helper_funcs.atomic_enable
-	 * - &drm_crtc_helper_funcs.commit
-	 *
-	 * and the encoder is enabled via one of:
+	 * This callback should enable the bridge. It is called right before
+	 * the preceding element in the display pipe is enabled. If the
+	 * preceding element is a bridge this means it's called before that
+	 * bridge's @pre_enable function. If the preceding element is a
+	 * &drm_encoder it's called right before the encoder's
+	 * &drm_encoder_helper_funcs.enable, &drm_encoder_helper_funcs.commit or
+	 * &drm_encoder_helper_funcs.dpms hook.
 	 *
-	 * - &drm_encoder_helper_funcs.atomic_enable
-	 * - &drm_encoder_helper_funcs.enable
-	 * - &drm_encoder_helper_funcs.commit
+	 * The display pipe (i.e. clocks and timing signals) feeding this bridge
+	 * will not yet be running when this callback is called. The bridge must
+	 * not enable the display link feeding the next bridge in the chain (if
+	 * there is one) when this callback is called.
 	 *
 	 * The @pre_enable callback is optional.
 	 *
@@ -322,31 +277,19 @@ struct drm_bridge_funcs {
 	/**
 	 * @enable:
 	 *
-	 * The @enable callback should enable the bridge.
+	 * This callback should enable the bridge. It is called right after
+	 * the preceding element in the display pipe is enabled. If the
+	 * preceding element is a bridge this means it's called after that
+	 * bridge's @enable function. If the preceding element is a
+	 * &drm_encoder it's called right after the encoder's
+	 * &drm_encoder_helper_funcs.enable, &drm_encoder_helper_funcs.commit or
+	 * &drm_encoder_helper_funcs.dpms hook.
 	 *
 	 * The bridge can assume that the display pipe (i.e. clocks and timing
 	 * signals) feeding it is running when this callback is called. This
 	 * callback must enable the display link feeding the next bridge in the
 	 * chain if there is one.
 	 *
-	 * If the preceding element is a &drm_bridge, then this is called after
-	 * that bridge is enabled via one of:
-	 *
-	 * - &drm_bridge_funcs.enable
-	 * - &drm_bridge_funcs.atomic_enable
-	 *
-	 * If the preceding element of the bridge is a display controller, then
-	 * this callback is called after the CRTC is enabled via one of:
-	 *
-	 * - &drm_crtc_helper_funcs.atomic_enable
-	 * - &drm_crtc_helper_funcs.commit
-	 *
-	 * and the encoder is enabled via one of:
-	 *
-	 * - &drm_encoder_helper_funcs.atomic_enable
-	 * - &drm_encoder_helper_funcs.enable
-	 * - drm_encoder_helper_funcs.commit
-	 *
 	 * The @enable callback is optional.
 	 *
 	 * NOTE:
@@ -359,30 +302,17 @@ struct drm_bridge_funcs {
 	/**
 	 * @atomic_pre_enable:
 	 *
-	 * The display pipe (i.e. clocks and timing signals) feeding this bridge
-	 * will not yet be running when the @atomic_pre_enable is called.
-	 *
-	 * This callback should perform all the necessary actions to prepare the
-	 * bridge to accept signals from the preceding element.
-	 *
-	 * If the preceding element is a &drm_bridge, then this is called before
-	 * that bridge is pre-enabled (unless marked otherwise by
-	 * @pre_enable_prev_first flag) via one of:
-	 *
-	 * - &drm_bridge_funcs.pre_enable
-	 * - &drm_bridge_funcs.atomic_pre_enable
+	 * This callback should enable the bridge. It is called right before
+	 * the preceding element in the display pipe is enabled. If the
+	 * preceding element is a bridge this means it's called before that
+	 * bridge's @atomic_pre_enable or @pre_enable function. If the preceding
+	 * element is a &drm_encoder it's called right before the encoder's
+	 * &drm_encoder_helper_funcs.atomic_enable hook.
 	 *
-	 * If the preceding element of the bridge is a display controller, then
-	 * this callback is called before the CRTC is enabled via one of:
-	 *
-	 * - &drm_crtc_helper_funcs.atomic_enable
-	 * - &drm_crtc_helper_funcs.commit
-	 *
-	 * and the encoder is enabled via one of:
-	 *
-	 * - &drm_encoder_helper_funcs.atomic_enable
-	 * - &drm_encoder_helper_funcs.enable
-	 * - &drm_encoder_helper_funcs.commit
+	 * The display pipe (i.e. clocks and timing signals) feeding this bridge
+	 * will not yet be running when this callback is called. The bridge must
+	 * not enable the display link feeding the next bridge in the chain (if
+	 * there is one) when this callback is called.
 	 *
 	 * The @atomic_pre_enable callback is optional.
 	 */
@@ -392,31 +322,18 @@ struct drm_bridge_funcs {
 	/**
 	 * @atomic_enable:
 	 *
-	 * The @atomic_enable callback should enable the bridge.
+	 * This callback should enable the bridge. It is called right after
+	 * the preceding element in the display pipe is enabled. If the
+	 * preceding element is a bridge this means it's called after that
+	 * bridge's @atomic_enable or @enable function. If the preceding element
+	 * is a &drm_encoder it's called right after the encoder's
+	 * &drm_encoder_helper_funcs.atomic_enable hook.
 	 *
 	 * The bridge can assume that the display pipe (i.e. clocks and timing
 	 * signals) feeding it is running when this callback is called. This
 	 * callback must enable the display link feeding the next bridge in the
 	 * chain if there is one.
 	 *
-	 * If the preceding element is a &drm_bridge, then this is called after
-	 * that bridge is enabled via one of:
-	 *
-	 * - &drm_bridge_funcs.enable
-	 * - &drm_bridge_funcs.atomic_enable
-	 *
-	 * If the preceding element of the bridge is a display controller, then
-	 * this callback is called after the CRTC is enabled via one of:
-	 *
-	 * - &drm_crtc_helper_funcs.atomic_enable
-	 * - &drm_crtc_helper_funcs.commit
-	 *
-	 * and the encoder is enabled via one of:
-	 *
-	 * - &drm_encoder_helper_funcs.atomic_enable
-	 * - &drm_encoder_helper_funcs.enable
-	 * - drm_encoder_helper_funcs.commit
-	 *
 	 * The @atomic_enable callback is optional.
 	 */
 	void (*atomic_enable)(struct drm_bridge *bridge,
@@ -424,32 +341,16 @@ struct drm_bridge_funcs {
 	/**
 	 * @atomic_disable:
 	 *
-	 * The @atomic_disable callback should disable the bridge.
+	 * This callback should disable the bridge. It is called right before
+	 * the preceding element in the display pipe is disabled. If the
+	 * preceding element is a bridge this means it's called before that
+	 * bridge's @atomic_disable or @disable vfunc. If the preceding element
+	 * is a &drm_encoder it's called right before the
+	 * &drm_encoder_helper_funcs.atomic_disable hook.
 	 *
 	 * The bridge can assume that the display pipe (i.e. clocks and timing
 	 * signals) feeding it is still running when this callback is called.
 	 *
-	 * If the preceding element is a &drm_bridge, then this is called before
-	 * that bridge is disabled via one of:
-	 *
-	 * - &drm_bridge_funcs.disable
-	 * - &drm_bridge_funcs.atomic_disable
-	 *
-	 * If the preceding element of the bridge is a display controller, then
-	 * this callback is called before the encoder is disabled via one of:
-	 *
-	 * - &drm_encoder_helper_funcs.atomic_disable
-	 * - &drm_encoder_helper_funcs.prepare
-	 * - &drm_encoder_helper_funcs.disable
-	 * - &drm_encoder_helper_funcs.dpms
-	 *
-	 * and the CRTC is disabled via one of:
-	 *
-	 * - &drm_crtc_helper_funcs.prepare
-	 * - &drm_crtc_helper_funcs.atomic_disable
-	 * - &drm_crtc_helper_funcs.disable
-	 * - &drm_crtc_helper_funcs.dpms.
-	 *
 	 * The @atomic_disable callback is optional.
 	 */
 	void (*atomic_disable)(struct drm_bridge *bridge,
@@ -458,34 +359,16 @@ struct drm_bridge_funcs {
 	/**
 	 * @atomic_post_disable:
 	 *
-	 * The bridge must assume that the display pipe (i.e. clocks and timing
-	 * signals) feeding this bridge is no longer running when the
-	 * @atomic_post_disable is called.
-	 *
-	 * This callback should perform all the actions required by the hardware
-	 * after it has stopped receiving signals from the preceding element.
+	 * This callback should disable the bridge. It is called right after the
+	 * preceding element in the display pipe is disabled. If the preceding
+	 * element is a bridge this means it's called after that bridge's
+	 * @atomic_post_disable or @post_disable function. If the preceding
+	 * element is a &drm_encoder it's called right after the encoder's
+	 * &drm_encoder_helper_funcs.atomic_disable hook.
 	 *
-	 * If the preceding element is a &drm_bridge, then this is called after
-	 * that bridge is post-disabled (unless marked otherwise by the
-	 * @pre_enable_prev_first flag) via one of:
-	 *
-	 * - &drm_bridge_funcs.post_disable
-	 * - &drm_bridge_funcs.atomic_post_disable
-	 *
-	 * If the preceding element of the bridge is a display controller, then
-	 * this callback is called after the encoder is disabled via one of:
-	 *
-	 * - &drm_encoder_helper_funcs.atomic_disable
-	 * - &drm_encoder_helper_funcs.prepare
-	 * - &drm_encoder_helper_funcs.disable
-	 * - &drm_encoder_helper_funcs.dpms
-	 *
-	 * and the CRTC is disabled via one of:
-	 *
-	 * - &drm_crtc_helper_funcs.prepare
-	 * - &drm_crtc_helper_funcs.atomic_disable
-	 * - &drm_crtc_helper_funcs.disable
-	 * - &drm_crtc_helper_funcs.dpms
+	 * The bridge must assume that the display pipe (i.e. clocks and timing
+	 * signals) feeding it is no longer running when this callback is
+	 * called.
 	 *
 	 * The @atomic_post_disable callback is optional.
 	 */
diff --git a/include/drm/drm_pagemap.h b/include/drm/drm_pagemap.h
index 46e9c58f09e0..2baf0861f78f 100644
--- a/include/drm/drm_pagemap.h
+++ b/include/drm/drm_pagemap.h
@@ -243,6 +243,8 @@ struct drm_pagemap_devmem_ops {
 			   struct dma_fence *pre_migrate_fence);
 };
 
+#if IS_ENABLED(CONFIG_ZONE_DEVICE)
+
 int drm_pagemap_init(struct drm_pagemap *dpagemap,
 		     struct dev_pagemap *pagemap,
 		     struct drm_device *drm,
@@ -252,17 +254,22 @@ struct drm_pagemap *drm_pagemap_create(struct drm_device *drm,
 				       struct dev_pagemap *pagemap,
 				       const struct drm_pagemap_ops *ops);
 
-#if IS_ENABLED(CONFIG_DRM_GPUSVM)
+struct drm_pagemap *drm_pagemap_page_to_dpagemap(struct page *page);
 
 void drm_pagemap_put(struct drm_pagemap *dpagemap);
 
 #else
 
+static inline struct drm_pagemap *drm_pagemap_page_to_dpagemap(struct page *page)
+{
+	return NULL;
+}
+
 static inline void drm_pagemap_put(struct drm_pagemap *dpagemap)
 {
 }
 
-#endif /* IS_ENABLED(CONFIG_DRM_GPUSVM) */
+#endif /* IS_ENABLED(CONFIG_ZONE_DEVICE) */
 
 /**
  * drm_pagemap_get() - Obtain a reference on a struct drm_pagemap
@@ -334,6 +341,8 @@ struct drm_pagemap_migrate_details {
 	u32 source_peer_migrates : 1;
 };
 
+#if IS_ENABLED(CONFIG_ZONE_DEVICE)
+
 int drm_pagemap_migrate_to_devmem(struct drm_pagemap_devmem *devmem_allocation,
 				  struct mm_struct *mm,
 				  unsigned long start, unsigned long end,
@@ -343,8 +352,6 @@ int drm_pagemap_evict_to_ram(struct drm_pagemap_devmem *devmem_allocation);
 
 const struct dev_pagemap_ops *drm_pagemap_pagemap_ops_get(void);
 
-struct drm_pagemap *drm_pagemap_page_to_dpagemap(struct page *page);
-
 void drm_pagemap_devmem_init(struct drm_pagemap_devmem *devmem_allocation,
 			     struct device *dev, struct mm_struct *mm,
 			     const struct drm_pagemap_devmem_ops *ops,
@@ -359,4 +366,7 @@ int drm_pagemap_populate_mm(struct drm_pagemap *dpagemap,
 void drm_pagemap_destroy(struct drm_pagemap *dpagemap, bool is_atomic_or_reclaim);
 
 int drm_pagemap_reinit(struct drm_pagemap *dpagemap);
+
+#endif /* IS_ENABLED(CONFIG_ZONE_DEVICE) */
+
 #endif