Merge tag 'mfd-next-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd

Pull MFD updates from Lee Jones:
 "Maxim MAX77705:
   - Added core MFD driver.
   - Added charger driver.
   - Added devicetree bindings for the charger and MFD core.
   - Added Haptic controller support via the input subsystem.
   - Added LED support.
   - Added support to simple-mfd-i2c for fuel gauge and hwmon.

  Samsung S2MPU05 (Exynos7870 PMIC):
   - Added core MFD support.
   - Added Regulator support for 21 LDOs and 5 BUCKs.
   - Added devicetree bindings for regulators and the PMIC core.

  TI TPS65215 & TPS65214:
   - Added support to the existing TPS65219 driver.
   - Added devicetree bindings.

  STMicroelectronics STM32MP25:
   - Added support to the stm32-timers MFD driver.
   - Added devicetree bindings.

  Congatec Board Controller (CGBC):
   - Added HWMON support for internal sensors.
   - Added support for the conga-SA8 module.

  Microchip LAN969X:
   - Enabled the at91-usart MFD driver for this architecture.

  MediaTek MT6359:
   - Added mfd_cell for mt6359-accdet to allow its driver to probe.

  Other misc driver updates:
   - AXP20X (AXP717): Added AXP717_TS_PIN_CFG register to writeable regs
     for temperature sensor configuration.
   - SM501: Switched to using BIT() macro to mitigate potential integer
     overflows in GPIO functions.
   - ENE KB3930: Added a NULL pointer check for off_gpios during probe
     to prevent potential dereference.
   - SYSCON: Added a check for invalid resource size to prevent issues
     from DT misconfiguration.
   - CGBC: Corrected signedness issues in cgbc_session_request
   - intel_soc_pmic_chtdc_ti / intel_soc_pmic_crc: Removed unneeded
     explicit assignment to REGCACHE_NONE.
   - ipaq-micro / tps65010: Switched to using str_enable_disable()
     helpers for clarity and potential size reduction.
   - upboard-fpga: Removed unnecessary ACPI_PTR() annotation.
   - max8997: Removed unused max8997_irq_exit() function, using devm_*
     helpers instead.
   - lp3943: Dropped unused #include <linux/pwm.h> from the header file.
   - db8500-prcmu: Removed needless return statements in void APIs.
   - qnap-mcu: Replaced commas with semicolons between expressions for
     correctness.
   - STA2X11: Removed the core MFD driver as the underlying platform
     support was removed.
   - EZX-PCAP: Removed the unused pcap_adc_sync function.
   - PCF50633 (OpenMoko PMIC): Removed the entire driver (core, adc,
     gpio, irq) as the underlying s3c24xx platform support was removed.

  Devicetree updates:
   - Converted fsl,mcu-mpc8349emitx binding to YAML
   - Added qcom,msm8937-tcsr compatible
   - Added microchip,sama7d65-flexcom compatible
   - Added rockchip,rk3528-qos syscon compatible
   - Added airoha,en7581-pbus-csr syscon compatible
   - Added microchip,sama7d65-ddr3phy syscon compatible
   - Added microchip,sama7d65-sfrbu syscon compatible"

* tag 'mfd-next-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (49 commits)
  mfd: cgbc-core: Add support for conga-SA8
  dt-bindings: mfd: syscon: Add microchip,sama7d65-sfrbu
  dt-bindings: mfd: syscon: Add microchip,sama7d65-ddr3phy
  mfd: cgbc: Add support for HWMON
  dt-bindings: mfd: syscon: Add the pbus-csr node for Airoha EN7581 SoC
  mfd: cgbc-core: Cleanup signedness in cgbc_session_request()
  mfd: pcf50633: Remove remaining PCF50633 support
  mfd: pcf50633: Remove unused platform IRQ code
  mfd: pcF50633-gpio: Remove unused driver
  mfd: pcf50633-adc: Remove unused driver
  mfd: qnap-mcu: Convert commas to semicolons in qnap_mcu_exec()
  mfd: mt6397-core: Add mfd_cell for mt6359-accdet
  dt-bindings: mfd: syscon: Add rk3528 QoS register compatible
  dt-bindings: mfd: atmel,sama5d2-flexcom: Add microchip,sama7d65-flexcom
  mfd: ezx-pcap: Remove unused pcap_adc_sync
  mfd: db8500-prcmu: Remove needless return in three void APIs
  mfd: Remove STA2x11 core driver
  mfd: max77620: Allow building as a module
  mfd: ene-kb3930: Fix a potential NULL pointer dereference
  dt-bindings: mfd: qcom,tcsr: Add compatible for MSM8937
  ...

1 files changed, 195 insertions, 0 deletions

diff --git a/include/linux/mfd/max77705-private.h b/include/linux/mfd/max77705-private.h
new file mode 100644
index 000000000000..214de7feeb8c
--- /dev/null
+++ b/include/linux/mfd/max77705-private.h
@@ -0,0 +1,195 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Maxim MAX77705 definitions.
+ *
+ * Copyright (C) 2015 Samsung Electronics, Inc.
+ * Copyright (C) 2025 Dzmitry Sankouski <dsankouski@gmail.com>
+ */
+
+#ifndef __LINUX_MFD_MAX77705_PRIV_H
+#define __LINUX_MFD_MAX77705_PRIV_H
+
+#define MAX77705_SRC_IRQ_CHG	BIT(0)
+#define MAX77705_SRC_IRQ_TOP	BIT(1)
+#define MAX77705_SRC_IRQ_FG	BIT(2)
+#define MAX77705_SRC_IRQ_USBC	BIT(3)
+#define MAX77705_SRC_IRQ_ALL	(MAX77705_SRC_IRQ_CHG | MAX77705_SRC_IRQ_TOP | \
+				MAX77705_SRC_IRQ_FG | MAX77705_SRC_IRQ_USBC)
+
+/* MAX77705_PMIC_REG_PMICREV register */
+#define MAX77705_VERSION_SHIFT	3
+#define MAX77705_REVISION_MASK	GENMASK(2, 0)
+#define MAX77705_VERSION_MASK	GENMASK(7, MAX77705_VERSION_SHIFT)
+/* MAX77705_PMIC_REG_MAINCTRL1 register */
+#define MAX77705_MAINCTRL1_BIASEN_SHIFT	7
+#define MAX77705_MAINCTRL1_BIASEN_MASK	BIT(MAX77705_MAINCTRL1_BIASEN_SHIFT)
+/* MAX77705_PMIC_REG_MCONFIG2 (haptics) register */
+#define MAX77705_CONFIG2_MEN_SHIFT	6
+#define MAX77705_CONFIG2_MODE_SHIFT	7
+#define MAX77705_CONFIG2_HTYP_SHIFT	5
+/* MAX77705_PMIC_REG_SYSTEM_INT_MASK register */
+#define MAX77705_SYSTEM_IRQ_BSTEN_INT	BIT(3)
+#define MAX77705_SYSTEM_IRQ_SYSUVLO_INT	BIT(4)
+#define MAX77705_SYSTEM_IRQ_SYSOVLO_INT	BIT(5)
+#define MAX77705_SYSTEM_IRQ_TSHDN_INT	BIT(6)
+#define MAX77705_SYSTEM_IRQ_TM_INT	BIT(7)
+/* MAX77705_RGBLED_REG_LEDEN register */
+#define MAX77705_RGBLED_EN_WIDTH	2
+/* MAX77705_RGBLED_REG_LEDBLNK register */
+#define MAX77705_RGB_DELAY_100_STEP_LIM 500
+#define MAX77705_RGB_DELAY_100_STEP_COUNT 4
+#define MAX77705_RGB_DELAY_100_STEP 100
+#define MAX77705_RGB_DELAY_250_STEP_LIM 3250
+#define MAX77705_RGB_DELAY_250_STEP 250
+#define MAX77705_RGB_DELAY_500_STEP 500
+#define MAX77705_RGB_DELAY_500_STEP_COUNT 10
+#define MAX77705_RGB_DELAY_500_STEP_LIM 5000
+#define MAX77705_RGB_DELAY_1000_STEP_LIM 8000
+#define MAX77705_RGB_DELAY_1000_STEP_COUNT 13
+#define MAX77705_RGB_DELAY_1000_STEP 1000
+#define MAX77705_RGB_DELAY_2000_STEP 2000
+#define MAX77705_RGB_DELAY_2000_STEP_COUNT 13
+#define MAX77705_RGB_DELAY_2000_STEP_LIM 12000
+
+enum max77705_hw_rev {
+	MAX77705_PASS1 = 1,
+	MAX77705_PASS2,
+	MAX77705_PASS3
+};
+
+enum max77705_reg {
+	MAX77705_PMIC_REG_PMICID1		= 0x00,
+	MAX77705_PMIC_REG_PMICREV		= 0x01,
+	MAX77705_PMIC_REG_MAINCTRL1		= 0x02,
+	MAX77705_PMIC_REG_BSTOUT_MASK		= 0x03,
+	MAX77705_PMIC_REG_FORCE_EN_MASK		= 0x08,
+	MAX77705_PMIC_REG_MCONFIG		= 0x10,
+	MAX77705_PMIC_REG_MCONFIG2		= 0x11,
+	MAX77705_PMIC_REG_INTSRC		= 0x22,
+	MAX77705_PMIC_REG_INTSRC_MASK		= 0x23,
+	MAX77705_PMIC_REG_SYSTEM_INT		= 0x24,
+	MAX77705_PMIC_REG_RESERVED_25		= 0x25,
+	MAX77705_PMIC_REG_SYSTEM_INT_MASK	= 0x26,
+	MAX77705_PMIC_REG_RESERVED_27		= 0x27,
+	MAX77705_PMIC_REG_RESERVED_28		= 0x28,
+	MAX77705_PMIC_REG_RESERVED_29		= 0x29,
+	MAX77705_PMIC_REG_BOOSTCONTROL1		= 0x4C,
+	MAX77705_PMIC_REG_BOOSTCONTROL2		= 0x4F,
+	MAX77705_PMIC_REG_SW_RESET		= 0x50,
+	MAX77705_PMIC_REG_USBC_RESET		= 0x51,
+
+	MAX77705_PMIC_REG_END
+};
+
+enum max77705_chg_reg {
+	MAX77705_CHG_REG_BASE			= 0xB0,
+	MAX77705_CHG_REG_INT			= 0,
+	MAX77705_CHG_REG_INT_MASK,
+	MAX77705_CHG_REG_INT_OK,
+	MAX77705_CHG_REG_DETAILS_00,
+	MAX77705_CHG_REG_DETAILS_01,
+	MAX77705_CHG_REG_DETAILS_02,
+	MAX77705_CHG_REG_DTLS_03,
+	MAX77705_CHG_REG_CNFG_00,
+	MAX77705_CHG_REG_CNFG_01,
+	MAX77705_CHG_REG_CNFG_02,
+	MAX77705_CHG_REG_CNFG_03,
+	MAX77705_CHG_REG_CNFG_04,
+	MAX77705_CHG_REG_CNFG_05,
+	MAX77705_CHG_REG_CNFG_06,
+	MAX77705_CHG_REG_CNFG_07,
+	MAX77705_CHG_REG_CNFG_08,
+	MAX77705_CHG_REG_CNFG_09,
+	MAX77705_CHG_REG_CNFG_10,
+	MAX77705_CHG_REG_CNFG_11,
+
+	MAX77705_CHG_REG_CNFG_12,
+	MAX77705_CHG_REG_CNFG_13,
+	MAX77705_CHG_REG_CNFG_14,
+	MAX77705_CHG_REG_SAFEOUT_CTRL
+};
+
+enum max77705_fuelgauge_reg {
+	STATUS_REG				= 0x00,
+	VALRT_THRESHOLD_REG			= 0x01,
+	TALRT_THRESHOLD_REG			= 0x02,
+	SALRT_THRESHOLD_REG			= 0x03,
+	REMCAP_REP_REG				= 0x05,
+	SOCREP_REG				= 0x06,
+	TEMPERATURE_REG				= 0x08,
+	VCELL_REG				= 0x09,
+	TIME_TO_EMPTY_REG			= 0x11,
+	FULLSOCTHR_REG				= 0x13,
+	CURRENT_REG				= 0x0A,
+	AVG_CURRENT_REG				= 0x0B,
+	SOCMIX_REG				= 0x0D,
+	SOCAV_REG				= 0x0E,
+	REMCAP_MIX_REG				= 0x0F,
+	FULLCAP_REG				= 0x10,
+	RFAST_REG				= 0x15,
+	AVR_TEMPERATURE_REG			= 0x16,
+	CYCLES_REG				= 0x17,
+	DESIGNCAP_REG				= 0x18,
+	AVR_VCELL_REG				= 0x19,
+	TIME_TO_FULL_REG			= 0x20,
+	CONFIG_REG				= 0x1D,
+	ICHGTERM_REG				= 0x1E,
+	REMCAP_AV_REG				= 0x1F,
+	FULLCAP_NOM_REG				= 0x23,
+	LEARN_CFG_REG				= 0x28,
+	FILTER_CFG_REG				= 0x29,
+	MISCCFG_REG				= 0x2B,
+	QRTABLE20_REG				= 0x32,
+	FULLCAP_REP_REG				= 0x35,
+	RCOMP_REG				= 0x38,
+	VEMPTY_REG				= 0x3A,
+	FSTAT_REG				= 0x3D,
+	DISCHARGE_THRESHOLD_REG			= 0x40,
+	QRTABLE30_REG				= 0x42,
+	ISYS_REG				= 0x43,
+	DQACC_REG				= 0x45,
+	DPACC_REG				= 0x46,
+	AVGISYS_REG				= 0x4B,
+	QH_REG					= 0x4D,
+	VSYS_REG				= 0xB1,
+	TALRTTH2_REG				= 0xB2,
+	VBYP_REG				= 0xB3,
+	CONFIG2_REG				= 0xBB,
+	IIN_REG					= 0xD0,
+	OCV_REG					= 0xEE,
+	VFOCV_REG				= 0xFB,
+	VFSOC_REG				= 0xFF,
+
+	MAX77705_FG_END
+};
+
+enum max77705_led_reg {
+	MAX77705_RGBLED_REG_BASE		= 0x30,
+	MAX77705_RGBLED_REG_LEDEN		= 0,
+	MAX77705_RGBLED_REG_LED0BRT,
+	MAX77705_RGBLED_REG_LED1BRT,
+	MAX77705_RGBLED_REG_LED2BRT,
+	MAX77705_RGBLED_REG_LED3BRT,
+	MAX77705_RGBLED_REG_LEDRMP,
+	MAX77705_RGBLED_REG_LEDBLNK,
+	MAX77705_LED_REG_END
+};
+
+enum max77705_charger_battery_state {
+	MAX77705_BATTERY_NOBAT,
+	MAX77705_BATTERY_PREQUALIFICATION,
+	MAX77705_BATTERY_DEAD,
+	MAX77705_BATTERY_GOOD,
+	MAX77705_BATTERY_LOWVOLTAGE,
+	MAX77705_BATTERY_OVERVOLTAGE,
+	MAX77705_BATTERY_RESERVED
+};
+
+enum max77705_charger_charge_type {
+	MAX77705_CHARGER_CONSTANT_CURRENT	= 1,
+	MAX77705_CHARGER_CONSTANT_VOLTAGE,
+	MAX77705_CHARGER_END_OF_CHARGE,
+	MAX77705_CHARGER_DONE
+};
+
+#endif /* __LINUX_MFD_MAX77705_PRIV_H */